Engineering Commons^™

Biological Reduction Of Perchlorate In Ion Exchange Regenerant Solutions Containing High Salinity And Ammonium Levels, Tina M. Gingras, Jacimaria R. Batista

Civil and Environmental Engineering and Construction Faculty Research

The most promising technologies to remove perchlorate from water are ion exchange and biological reduction. Although successful, ion exchange only separates perchlorate from water; it does not eliminate it from the environment. The waste streams from these systems contain the caustic or saline regenerant solutions used in the process as well as high levels of perchlorate. Biological reduction could be used to treat the regenerant waste solutions from the ion exchange process. A treatment scheme, combining ion exchange and biodegradation, is proposed to completely remove perchlorate from the environment. Perchlorate-laden resins generate brines containing salt concentrations up to 6% or …

Tests 2031 & 2055: Case Ih Jx 85 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Synthesis And Magnetic Properties Of Copt–Poly(Methylmethacrylate) Nanostructured Composite Material, Jiye Fang, Kevin L. Stokes, Jibao He, Weillie L. Zhou, Charles J. O'Connor, Daniela Caruntu

Physics Faculty Publications

We have prepared nanometer-sized CoPt particles dispersed in a poly~methyl methacrylate~PMMA!matrix, as a novel nanostructured magnetic plastic, through a soft chemical processing route. In this work, CoPt nanoparticles were successfully synthesized from a solution phase reduction system in the presence of capping ligands and stabilizing agents at high temperature. The CoPt nanoparticles were annealed at 400 °C for 3 h, and were subsequently re-dispersed inmethylmethacrylate~monomer! . The polymerization was induced by a UV source and the hardness of final product was adjusted by varying the amount of monomeric cross-link agent. Annealed bare CoPt nanoparticles as a ‘‘core’’ material and CoPt–PMMA …

Thermoelectric Properties Of Bi2sr2co2o9 Whiskers Under Hydrostatic Pressure, F Chen, Kevin L. Stokes, Ryozi Funahashi

Physics Faculty Publications

We report the temperature dependence of thermopower (S) in the ab plane of Bi2Sr2Co2O9 {BC-222} single crystalline whiskers under high pressure up to 1.2 GPa. Special modifications were made to our high-pressure transport measurement system to improve the measurement accuracy of S for whiskers with high resistance. Pressure improved the contact resistance dramatically. We observed a slight decrease of  S and four-wire electrical conductivity (sigma) under high pressure. As a result, the power factor (S2sigma) was decreased less than 20% by pressure. From the temperature dependence of sigma, the band gap of BC-222 whiskers increase very slightly …

Oxidation-Induced Stacking Fault In (100) And (111) Silicon Wafers, Mei Keat Liang

Student Works (2000-2009)

Oxidation-induced stacking fault (OISF) dimension and density change on (100) and (111) wafers, as a result of repeated preferential etching were studied using AFM. optical microscope and angular polishing techniques. Density on (100) and (111) wafers is independent of surface removal up to 3.0µm. This indicates the single layer nature of OISF formed from the sand blasted wafer. Besides having higher density, OISFs from (100) wafer were longer than OISF from (111) wafer. OISF width increases linearly with surface removal however the length does not change significantly with surface removal. ln the OISF normal depth studies using angular polishing technique, …

Membrane Ultrafiltration Of Treated Palm Oil Mill Effluent (Pome), Pui Wah Wong

Student Works (2000-2009)

The common practice for treatment of palm oil effluent (POME) in Malaysia employs a combination of aerobic and an anaerobic treatment. Bearing in mind that the quantity of POME produced is high, reaching 740 000 m3 in May 2001, reuse and recycling of treated POME can be an excellent practice in terms of saving of water resources. As the treated POME is already low in certain parameters required by the Department of Environment (i.e. BOD, total and ammoniacal nitrogen, oil and grease), further treatment will greatly enhance the water quality. The purpose of the advance treatment step is to allow …

Hybrid Sr Arq Scheme Using Trellis Coded Modulation For Point-To-Multipoint Communication Over Nonstationary Channels, Necmi̇ Taşpinar

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, a type-I hybrid SR ARQ scheme using trellis coded modulation (TCM) for point-to-multipoint communication was analyzed on nonstationary broadcast channels where the channel bit error rate (BER) varies over time. A nonstationary channel is modelled as a two-state Markov chain. In the numerical calculations, it is found that, for a given p_{1} and \bar \varepsilon , the values of the average burst length \bar b have a very small influence on the throughput. Numerical results show that the throughput is better for values between 10 ^{-6} and 10 ^{-4}of average bit error rate \bar \varepsilon if the …

Stability Analysis Of A Closed-Loop Control For A Pulse Width Modulated Dc Motor Drive, Fatma Gürbüz, Eyüp Akpinar

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, the effect of the variation of amplitude and the chopping period of a PWM signal on the stability of a closed-loop control for a DC motor drive is investigated. First, the entire system is formulated as a Linear Quadratic (LQ) tracker with output feedback [1]. Then, stability analysis for the varying amplitude and the varying chopping period is carried out by the methods of root locus and the Jury test. Finally, stability limits obtained from a root locus and Jury test are checked by the simulation of the system in MATLAB.

Flow Patterns In A Two-Roll Mill, Christopher Hills

Articles

The two-dimensional flow of a Newtonian fluid in a rectangular box that contains two disjoint, independently-rotating, circular boundaries is studied. The flow field for this two-roll mill is determined numerically using a finite-difference scheme over a Cartesian grid with variable horizontal and vertical spacing to accommodate satisfactorily the circular boundaries. To make the streamfunction numerically determinate we insist that the pressure field is everywhere single-valued. The physical character, streamline topology and transitions of the flow are discussed for a range of geometries, rotation rates and Reynolds numbers in the underlying seven-parameter space. An account of a preliminary experimental study of …

Thread Transparency In Information Flow Middleware, Rainer Koster, Andrew P. Black, Jie Huang, Jonathan Walpole, Calton Pu

Computer Science Faculty Publications and Presentations

Existing middleware is based on control-flow centric interaction models such as remote method invocations, poorly matching the structure of applications that process continuous information flows. Difficulties cultiesin building this kind of application on conventional platforms include flow-specific concurrency and timing requirements, necessitating explicit management of threads, synchronization, and timing by the application programmer. We propose Infopipes as a high-level abstraction for information flows, and we are developing a middleware framework that supports this abstraction. Infopipes transparently handle complexities associated with control flow and multi-threading. From high-level configuration descriptions the platform determines what parts of a pipeline require separate threads or …

Mobile Home Security With Gprs, Duy Nguyen

Theses : Honours

This thesis presents the results of an honours project on the development of a security system for use on mobile devices. Mobile Home Security (MHS) is a prototype system that aimed to fully investigate a potential use of the wireless high-speed technology General Packet Radio Service (GPRS) in transmitting video from a static location. This thesis Mobile Home Security with GPRS describes in detail the design and developmental stages for the system. The research focused on the sending of video from a security capture device over a high speed radio network. The first stage of the research involved the design …

Acceleration Element For Femtosecond Electron Pulse Compression, Bao-Liang Qian, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

An acceleration element is proposed for compressing the electron pulse duration in a femtosecond photoelectron gun. The element is a compact metal cavity with curved-shaped walls. An external voltage is applied to the cavity where a special electric field forms in such a way that the slow electrons in the electron pulse front are accelerated more than the fast electrons, and consequently the electron pulse duration will be compressed. The distribution of the electric field inside the acceleration cavity is analyzed for the geometry of the cavity. The electron dynamics in this acceleration cavity is also investigated numerically. Numerical results …

121.6 Nm Radiation Source For Advanced Lithography, Jianxun Yan, Ashraf El-Dakrouri, Mounir Laroussi, Mool C. Gupta

Electrical & Computer Engineering Faculty Publications

A vacuum ultraviolet (VUV) light source based on a high-pressure cylindrical dielectric barrier discharge (DBD) has been developed. Intense and spectrally clean Lyman-α line at 121.6 nm was obtained by operating a DBD discharge in neon with a small admixture of hydrogen. The spectrum, optical power, stability, and efficiency of the source were measured. The influence of the gas mixture and total gas pressure on the VUV intensity has been investigated. Maximum optical power of 3.2 W and spectral width 0.03 nm was achieved. Power stability of 2% for 100 h of operation has also been obtained. The newly developed …

High-Efficiency Solar Cells Based On Cu(Inal)Se[Sub 2] Thin Films, S. Marsillac, P. D. Paulson, M. W. Haimbodi, R. W. Birkmire, W. N. Shafarman

Electrical & Computer Engineering Faculty Publications

A Cu(InAl)Se₂solar cell with 16.9% efficiency is demonstrated using a Cu(InAl)Se₂thin film deposited by four-source elemental evaporation and a device structure of glass/Mo/Cu(InAl)Se₂/CdS/ZnO/indium tin oxide/(Ni/Algrid)/MgF₂. A key to high efficiency is improved adhesion between the Cu(InAl)Se₂ and the Mo back contact layer, provided by a 5-nm-thick Ga interlayer, which enabled the Cu(InAl)Se₂ to be deposited at a 530 °C substrate temperature. Film and device properties are compared to Cu(InGa)Se₂ with the same band gap of 1.16 eV. The solar cells have similar behavior, with performance limited by recombination through …

Electron Pulse Broadening Due To Space Charge Effects In A Photoelectron Gun For Electron Diffraction And Streak Camera Systems, Bao-Liang Qian, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The electron pulse broadening and energy spread, caused by space charge effects, in a photoelectron gun are studied analytically using a fluid model. The model is applicable in both the photocathode-to-mesh region and the postanode electron drift region. It is found that space charge effects in the photocathode-to-mesh region are generally unimportant even for subpicosecond pulses. However, because of the long drift distance, electron pulse broadening due to space charge effects in the drift region is usually significant and could be much larger than the initial electron pulse duration for a subpicosecond electron pulse. Space charge effects can also lead …

Self-Assembly Of Spatially Separated Silicon Structures By Si Heteroepitaxy On Ni Disilicide, Elena A. Guliants, Chunhai Ji, Wayne A. Anderson

Electrical and Computer Engineering Faculty Publications

A nonlithographic approach to produce self-assembled spatially separated Si structures for nanoelectronic applications was developed, employing the metal-induced silicon growth. Densely packed Si whiskers, 500–800 nm thick and up to 2500 nm long, were obtained by magnetron sputtering of Si on a 25 nm thick Ni prelayer at 575 °C. The nucleation of the NiSi2 compound at the Ni–Si interface followed by the Si heteroepitaxy on the lattice-matched NiSi2 is suggested to be the driving force for the whisker formation.

Designing Human-Centered Distributed Information Systems, Jiagie Zhang, Vimla L. Patel, Kathy A. Johnson, Jane Malin, Jack W. Smith

Faculty, Staff and Student Publications

Many computer systems are designed according to engineering and technology principles and are typically difficult to learn and use. The fields of human-computer interaction, interface design, and human factors have made significant contributions to ease of use and are primarily concerned with the interfaces between systems and users, not with the structures that are often more fundamental for designing truly human-centered systems. The emerging paradigm of human-centered computing (HCC)-which has taken many forms-offers a new look at system design. HCC requires more than merely designing an artificial agent to supplement a human agent. The dynamic interactions in a distributed system …

End To End Congestion Control In High-Speed Networks, Sarangapani Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

This paper proposes an adaptive methodology to prevent congestion in packet switched networks such as the Internet, where the internal network nodes convey very little information to the ingress nodes. Two architectures of preventing the congestion are presented: the first one when the traffic arrival rates, and bottleneck queue levels are known and the other when these are unknown. In the latter, the network traffic is estimated online using an adaptive system by measuring the buffer occupancy. In both architectures, the congestion is controlled by adjusting the transmission rates of non real-time and certain real-time sources in response to the …

Angular Range For Reflection Of P-Polarized Light At The Surface Of An Absorbing Medium With Reflectance Below That At Normal Incidence, R. M.A. Azzam, Ericson E. Ugbo

Electrical Engineering Faculty Publications

The range of incidence angle, 0 < φ < φ_e, over which p-polarized light is reflected at interfaces between transparent and absorbing media with reflectance below that at normal incidence is determined. Contours of constant φ_e in the complex plane of the relative dielectric constant ε are presented. A method for determining the real and imaginary parts of the complex refractive index, ε^1/2 = n + jk, which is based on measuring φ_e and the pseudo-Brewster angle φ_pB, is viable in the domain of fractional optical constants, n, k < 1.

Project Continuation Proposal: Radiation Transport Modeling Of Beam-Target Experiments For The Aaa Project, William Culbreth

Reactor Campaign (TRP)

The AAA program will rely on the use of an accelerator-based transmuter1 to expose spent nuclear fuel to high-energy neutrons. The neutron flux will be sufficient to activate or fission the long-lived isotopes of Tc, I, Pu, Am, Cm, and Np that present a significant radiological hazard in commercial spent fuel. Transmuter fuel will be subcritical and a high-energy proton accelerator is needed to maintain the necessary neutron flux through the use of a neutron spallation target. The maximum neutron energy produced by spallation (~ 800 MeV) is significantly higher than that produced by a commercial light water reactor (~ …

University Of Nevada, Las Vegas Transmutation Research Program Annual Report 2001, Anthony Hechanova, Elizabeth Johnson, Gary Cerefice

Transmutation Research Program Reports (TRP)

The UNLV Transmutation Research Program was established in March 2001 as part of the national Advanced Accelerator Applications program to develop the technologies necessary for the ecological and economical treatment of spent nuclear fuel.

The primary role of the UNLV program in the national effort is the training of graduate and undergraduate students in nuclear engineering and other related fields to support the augmentation of the U.S. human infrastructure for transmutation technologies.

To accomplish this role, UNLV has developed the TRP with the primary focus of supporting student research into transmutation and supporting technologies. This focus is realized through the …

Experimental Investigation Of Steel Corrosion In Lead Bismuth Eutectic (Lbe): Characterization, Species Identification, And Chemical Reactions, John Farley, Dale L. Perry, Allen L. Johnson

Transmutation Sciences Materials (TRP)

The goal of the present research is to achieve a basic understanding of corrosion of steels by Lead Bismuth Eutectic (LBE). Liquid LBE is under consideration in the transmuter as both a spallation target and as a blanket coolant. There have been previous studies of LBE, especially by the Russians, who have over 80 reactor-years experience with LBE coolant in their Alpha-class submarine reactors. However, a fundamental understanding and verification of its role in the corrosion of steels is still very incomplete. We have begun a program of post-experiment testing and analysis on steel samples that have been in intimate …

Corrosion Of Steel By Lead Bismuth Eutectic, John Farley, Dale L. Perry, Allen L. Johnson

Transmutation Sciences Materials (TRP)

This research program will analyze various steel samples that have been exposed to LBE as part of the national program to develop LBE and transmutation technologies. This information will be paramount in developing engineering efforts to control, avoid, and/or minimize the effect of corrosion of steels by LBE in transmuter and LBE systems. Additionally, this program provides UNLV researchers with hands-on experience that will be crucial in developing the UNLV LBE program, supporting the University’s mission with the ISTC target complex, and the future development of additional facilities to examine LBE systems.

The research group plans to test the hypothesis …

Corrosion Of Steel By Lead Bismuth Eutectic: Year 1 Annual Report, John Farley

Transmutation Sciences Materials (TRP)

The goal is to investigate the corrosion of stainless steel by lead-bismuth eutectic (LBE), which has been proposed for use as a blanket coolant and a spallation target in the transmuter.

Hydrogen-Induced Embrittlement Of Candidate Target Materials For Applications In Spallation-Neutron-Target Systems, Ajit K. Roy, Brendan O'Toole, Zhiyong Wang, David W. Hatchett

Transmutation Sciences Materials (TRP)

Spallation-neutron-sources, such as those under investigation for use in accelerator-driven transmutation systems, generate neutrons through the collision of high-energy protons, or charged hydrogen atoms, with heavy metal targets such as lead. As a result, these systems also tend to deposit a significant amount of hydrogen in the materials of the transmuter target and superstructure. This can result in accelerated corrosion and changes in the properties of the exposed materials. Of particular importance is a phenomenon called hydrogen embrittlement, in which materials lose their ductility (ability to deform under stress) and become brittle (more susceptible to fracture) after reacting with hydrogen. …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics: Task V 4th Quarterly Report, Samir Moujaes

Transmutation Sciences Materials (TRP)

The project is moving on target with the newly realigned objective set for the Phase I. Through close communications with Dr. Li and Dr. Jinsuo Zhang from LANL a realignment of the simulation work has been recommended. The reason for that is the vendor of STAR-CD/CHEMKIN had not perfected yet the final coupling of the post processing of output for any potential surface chemistry reaction taking place on the inside pipe surface of the LBE loop. This is because the coupling of CHEMKIN and STAR-CD has been done fairly recently.

Our final effort has been to generate using an innovative …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

Many of the international efforts to develop transmutation technology, including the U.S., Russian, and European scientific communities, have determined that lead bismuth eutectic (LBE) is a potential material for use as a both a spallation target and a coolant. To exploit this potential, a more thorough understanding of the effect and rates of corrosion on steels, particularly non-Russian alloys, inside the LBE systems is required. Properly controlling the oxygen content in LBE systems has been observed to drastically reduce the corrosion of structural steels in LBE. However, the transport of oxygen and formation of corrosion products is not well understood; …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823, Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

Alloy EP-823 has been developed as a structural material for Lead Bismuth Eutectic (LBE) systems, such as those under development for nuclear transmutation systems, as well as other applications. However, very little data regarding the mechanical properties of this alloy exists in the open literature, particularly in the temperature regime of interest for transmutation systems. To address this need, the UNLV research team, in collaboration with researchers from Los Alamos National Laboratory, has developed a research program to evaluate tensile properties of Alloy EP-823 stainless steel at elevated temperatures, which is not being performed at any other facility to date. …

Neutron Multiplicity Measurements Of Target/Blanket Materials, Carter D. Hull, William H. Johnson

Transmutation Sciences Physics (TRP)

To begin developing the database necessary for the validation and benchmarking of the LAHET component of the MCNPX code suite, the UNLV research program has set forth the following objectives. First, the current MCNPX suite will be used to develop models of multi-element neutron detector systems. These models of the detector systems will be incorporated into the design of detailed models for the entire detector-target system. These models will first be used to help design the irradiation experiments, and then will be used to model the behavior of the system. Irradiation experiments corresponding to the detector-target system models will be …

Nuclear Criticality, Shielding, And Thermal Analyses Of Separations Processes For The Transmutation Fuel Cycle, William Culbreth, Denis Beller

Separations Campaign (TRP)

The remediation of nuclear waste created by conventional fission reactors will rely upon the separation of the waste products for further treatment. The UREX+ process now under review will involve the use of an aqueous chemical process to separate out depleted uranium resulting in a product containing minor actinides, fission products, cesium, strontium, technetium, and iodine. The radioactive decay of strontium and cesium produces roughly half of the thermal and gamma production in spent fuel and the relatively short halflife of isotopes of both of these elements requires storage for about 300 years before heat and radiation decreases to safe …