Engineering Commons^™

Derivation And Analysis Of Maximum And Conditional Work Of An Electromagnet In Relays With Small Gaps And Constant Armature Load, Dominic Chambega

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Mathematical Simulation Of The Influence Of Volatile Ma•Rrer Cloud On Heterogeneous Ignition Of Single Coal Particles, Hassan Ratal Ambula

Tanzania Journal of Engineering and Technology (TJET)

Asimple model has been developed to predict the heterogeneous ignition temperature for single coal particles under conditions of negligible, natural and forced convections. These conditions cause different sizes Of volatile matter cloud that surround the coal particle. The model is based on the ignition Of a single coal particle heated by irradiation from spot heaters in a cold (ambient) surrounding. Energy from the particle surface oxidation, volatile matter combustion and physical heating from the spot heaters are all included in rhe particle energv balance. General ignüion criterion is used to determine the ignition point. The agreement between the experimental and …

Probabilistic Load Flow For Mv Radial Distribution Networks Supplying Statistical Loads, B Kundy

Tanzania Journal of Engineering and Technology (TJET)

Aecurate load models are required Jör 'he computation OJ' load on Medium Voltage (MV) distribution net•.vovk.s_ Modern microprocessors in recent times have enabled researchers stunple and log domestic loads. The findings show that domestic loads are stochastic in nonwe and are best described bv u beta probability distribution [Herman et al. 1999]. The statistical evaluafion lhe consumer voltages requires description load currents al rhe lime e/ lhe system maximum demand. In this paper. an analytical 1001 computing voltage vegulation on MV distribution net-norks fi•eding statistical louds is presenled. To deal beta- distributed currents on MV distribution networks, new scaling factors …

Design And Analysis Of A Process For Melt Casting Metallic Fuel Pins Incorporating Volatile Actinides, Yitung Chen, Randy Clarksean, Darrell Pepper

Fuels Campaign (TRP)

After considering the heating mechanisms, casting issues, crucible design and issues related to the mass transport of americium, an ISM system was selected for melting the feedstock and casting fuel pins containing high vapor pressure actinides (americium). The finite element commercial software (FIDAP) was used to simulate the induction melting process and the casting process. Phase change is considered both in the heating and in the solidification process. Various factors and properties are studied, such as boundary conditions and initial conditions, output current, frequency of the current, main dimensions of the system, mold preheating temperature, heat transfer coefficient and mold …

How To Increase The Ability Of A Student To Learn, Srinivas R. Chakravarthy

Industrial & Manufacturing Engineering Presentations And Conference Materials

An instructor is always challenged when covering the materials in a course (according to the syllabus) and at the same time making sure that all students have the opportunity to learn and understand the materials presented in the classroom. In this paper we will present some ideas and tools that enable one to try to achieve a balance. These are based on the author’s experience and perspective in teaching deterministic and stochastic operations research courses.

Hydrazine/Nitrogen Dioxide Fiber Optic Sensor, Alfred S. Andrawis, Josephine B. Santiago, Rebecca Young, Clayton J. Baum

Chemistry and Chemical Engineering Faculty Publications

This paper outlines the development of a dual hydrazine/nitrogen dioxide (HZ/NO2) prototype fiber optic sensor utilizing an acid-base indicator that undergoes color changes depending on which gas is present. Bromothymol blue bromocresol green mixture (1/1) in hydrogel (1/1), produces a blue-green indicator for HZ and/or NO2. The sensor was tested several times over a period of eight weeks and the response was consistent and proved the feasibility of dual HZ/NO2 leak detection. Prototype sensor construction, the hardware, and the software of the electronic interrogator circuitry are briefly explained. The paper presents a summary of sensor response when exposed to 52 …

A Recommendation For An Enhanced Fujita Scale (Ef-Scale)

United States Department of Commerce: Staff Publications

Background

National Weather Service (NWS) personnel who are responsible for rating tornadoes have expressed frustrations in applying the Fujita Scale in a consistent and accurate manner. Weak links in a structural system or a slow-moving storm sometimes lead to an overrating of a tornado event. Several technical articles suggest that wind speeds associated with some descriptions of damage are too high. For example, a 260 mph wind speed is not required to completely destroy a well constructed house and blow away the debris. The damage occurs at significantly lower wind speeds. Minor et al. (1977) and Phan and Simiu (2003) …

Comparative Study On The Use Of Coherent Radar-Derived Electric Fields Vs. Statistical Electric Fields For The Initialization Of A High-Latitude Ionospheric Model, Christopher M. Hogue

Theses and Dissertations

The structure and time development of the magnetosphere-ionosphere system have significant impacts on the Air Force and its mission. Specifically, an accurate knowledge of ionospheric plasma densities is important for the operation of many Air Force systems. This research analyzes plasma density structure development through comparing two distinct electric field models. The two models compared here are a commonly used statistical model created by Heppner and Maynard 1987, and a more recently developed model using real-time coherent radar measurements from the SuperDARN radar network. Ionospheric simulations were run using Utah State University s Time-Dependent Ionospheric Model (TDIM) with the two …

Estimating Equatorial F-Region Daytime Vertical E X B Drift Velocities From Ground-Based Magnetometer Measurements In The Philippine Longitude Sector, Shauna M. Kinkela

Theses and Dissertations

Ionospheric disturbances can severely impact Department of Defense (DoD) systems, such as radar. satellite. and navigation technologies. Forecasting disturbances and describing the Earth's ionosphere, in turn, relies upon innovative computer-based models that gather input parameters from ground and space-borne observations and empirical models for ionospheric drivers. Equatorial E x B drift velocities are significant input parameters that go into many ionospheric models, because they help describe vertical plasma motions near the magnetic equator. Previous work by Anderson, et al 2002 has demonstrated the ability to derive Peruvian longitude sector, daytime vertical E x B drifts from ground-based magnetometer data. The …

Interferometric And Holographic Imaging Of Surface-Breaking Cracks, James Lawrence Blackshire, Bradley D. Duncan

Electro-Optics and Photonics Faculty Publications

Two advanced nondestructive evaluation systems are developed for imaging surface-breaking cracks in aerospace materials. The systems use scanning heterodyne interferometry and frequency-translated holography principles to image ultrasonic displacement fields on material surfaces with high resolution and sensitivity. Surface-breaking cracks are detected and characterized by visualizing near-field ultrasonic scattering processes, which in turn results in local intensification of ultrasonic displacement fields in the immediate vicinity of a crack. The local intensification permits cracks to be easily distinguished from background levels, and creates unique displacement field images that follow the contours and morphology of the cracks with microscopic precision. The interferometric and …

Variations On Particle Swarm Optimization And Their Experimental Evaluation On Maximum Satisfiability, Susan A Abdelshahid

Archived Theses and Dissertations

No abstract provided.

Afci Quarterly Input – Unlv April Through June, 2004, Harry Reid Center For Environmental Studies. Nuclear Science And Technology Division

Transmutation Research Program Reports (TRP)

Quarterly report highlighting research projects and objectives of the Transmutation Research Program at the Nuclear Science & Technology Division, Harry Reid Research Center.

The University of Nevada, Las Vegas supports the AFCI through research and development of technologies for economic and environmentally sound refinement of spent nuclear fuel. The UNLV program has four components: infrastructure, international collaboration, student-based research, and management and program support.

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics-Task V: Third Quarterly Report 03/01/2004-05/31/2004, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The Lead-Bismuth eutectic (LBE) has been determined from previous experimental studies by the Russians and the European scientific community to be a potential material that can be used as a spallation target and coolant for the TRP proposed application. Properly controlling the oxygen content in LBE can drastically reduce the LBE corrosion to structural steels. However, existing knowledge of material corrosion performance was obtained from point-wise testing with only very sparse experimental data. Scientists have noticed that the concentration of oxygen dissolved in the liquid alloy could control the corrosion rate of steels exposed to Pb or Pb-Bi. At high …

Studies Of Infrared Optical Properties Of Palladium Nanoparticles With Different Sizes And Dispersed States, Yan-Xia Jiang, Hong-Gang Liao, Wei Chen, Shi-Gang Sun

Journal of Electrochemistry

Pd nanoparticles with different sizes and dispersed states were prepared. Their infrared optical properties were studied with CO molecule probe. The infrared spectroscopic investigation revealed that Pd_n of 6.6 nm and Pd_n(cube)of 100～150nmexhibit normal IR absorption. The center of IR bands are around 1970 cm^-1 and 1910cm^-1. Pd_nis introduced into the surface of electrode, and is induced by interface electric fieldto form the aggregation of nanoparticles Pd_n(ag). The Pd_n(ag) has a different IR optical property from Pd_n. The direction of IR absorption band of Pd_{n …}

Preparation And Optical Properties Of Highly Ordered Cds Nanowire Arrays, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Highly ordered CdS nanowire arrays have been prepared by using dc electrodeposition in the porous anodic aluminum oxide template. Scanning electro microscopy (SEM) and transmission electron microscopy (TEM) reveal that the nanowires are uniform and highly ordered. The measurements of X-ray diffraction and high-resolved electron microscopy (HRTEM) show that the nanowires are hexagonal structure with the crystallographic c-axis preferentially oriented along the length of the pore. The UV-Vis absorption spectra of CdS nanowire arrays show that the absorption edges of the nanowire arrays shift towards short wavelength with the decrease of the nanowire size. The photoluminescence measurements show that the …

Preparation, Characterization And Photoelectrochemical Activities Of Cu-Tio2/Ito Films, Dong Shu, Chun He, Han-Xia Zhang, Ya Xiong

Journal of Electrochemistry

Cu-TiO₂/ITO films were prepared by direct photo-reduction deposition of Cu²⁺ on TiO₂/ITO films. The nanocomposite films were characterized by UV-vis diffuse reflectance spectra (DRS), XRD spectra, Scanning Electron Microscope (SEM) technology, and photovoltage measurement. The feasibility of improving the photocatalytic activity of TiO₂ film by combining the modification of Cu nanoparticles with the application of anodic bias was investigated. The experimental results showed that the deposited Cu has an apparent enhancement effect with respect to suppressing the recombination between the photogenerated charge carriers and enhancing the photocatalytic oxidation of formic acid. The combination could …

Investigation Of Adsorption And Oxidation Behavior Of Isosafrole On A Smooth Pt, Xiao-Hong Zhang, Xiao-Jing Su, Qi-Ling Zhong, Lei Zhang, De-Sheng Mei, Bin Ren, Zhong-Qun Tian

Journal of Electrochemistry

The electro-oxidation of isosafrole on a smooth platinum electrode was investigated in the non-aqueous solution. The CV curve shows two oxidation peaks and one reduction peak in the potential region between -0.5 V and 1.95 V. The relation between the oxidation and reduction peaks has been determined also by CV. The adsorption behavior of isosafrole on Pt was also investigated.

Study On Electrochemical Performance Of Electroless Cobalt Coating For Microencapsution Of Hydrogen Storage Alloys, Tong-Chi Xia, Sheng-Li Zhang, Shu-Xin Wang, Kun Huang, Wen-Zeng Tian

Journal of Electrochemistry

The chemical cobalt plating method is used to treat on the hydrogen storage alloys. Effect of the surface treatment on the electrochemical performance of MH eletrodes was investigated by carrying out experimental methods of CV, AC and charge/discharge cycle tests. The results showed that after microencapsulation with cobalt, the impedance of electrochemical reaction on the surface and polarization during chare/discharge process was markedly decreased; and the electrocatalytic activity on the surface, discharge capacity, charge efficiency was improved. It was also indicated that the anode reaction of MH electrode treated was controlled by diffusion process.

Two Kinds Of Polarons Observedin Polyaniline In Aqueous H2So4, Qin Zhou, Lin Zhuang, Jun-Tao Lu

Journal of Electrochemistry

Simultaneous electrochemistry electron spin resonance (ESR) conductance measurements were carried out on electropolymerized polyaniline and ESR spectra were obtained with high signal/noise ratio. Spectral simulation revealed that in the early stage of polymerization, there were two kinds of polarons. According to the potential dependence of the ESR line width and the corresponding conductivitychange of the polymer, the two polarons are thought to be in ordered and disordered domains, respectively. With increasing doping level, the two polarons underwent similar transfer from Curie spin to Pauli spin and both polarons were charge carriers in the conducting polymer. This deduction was further supported …

Electrochemical Lithium Insertion Of Nanosized Tio2, Ying Lan, Jian-Wen Liu, Xue-Ping Gao, Xing-Di Zhou, Jin-Qiu Qu, Feng Wu, De-Ying Song

Journal of Electrochemistry

The protonic titanate nanotubes with the diameter of 10～15 nm were synthesized via hydrothermal method in NaOH solution and the calcined nanotubes at 500 ℃ were transferred to anatase nanorods with the diameter of 12～20 nm due to dehydration.The electrochemical behavior of the anatase nanorods as lithium insertion materials was examined. The results showed that the nanorod electrode had the high initial discharge capacity of 232 mAh/g and second reversible capacity of 198 mAh/g. The capacity of nanorod electrode maintained 152mAh/g after 20 cycles.

Electrocatalytic And Lifetime Studies Of Commercial Catalystsin A Pemfc, Cheng Xuan, Yan-Yun Ma, Li Qi, Cheng Peng, Ling Chen, Jun Zhao, Ying Zhang, Qin-Bai Fan

Journal of Electrochemistry

A particularly designed H-type cell was used to simulate the operating condition of a hydrogen-air proton exchange membrane fuel cell (PEMFC). The electrocatalytic activity, morphology, structure and lifetime of commercially available catalysts, carbon support platinum (Pt/C) and unsupported platinum-ruthenium (Pt-Ru), were preliminary studied by carrying out electrochemical measurements and by SEM, XRD techniques. The catalysts were simultaneously tested in the H-cell under operation, and also separately tested in a conventional electrochemical cell for comparison. It was found that the characteristic peaks of hydrogen adsorption/desorption on cyclic voltammograms shifted considerably to a more positive direction for Pt/C, while a more negative …

Direct Electron Transfer Of Redox Proteins And Enzymes Promoted By Carbon Nanotube, Chen-Xin Cai, Jing Chen

Journal of Electrochemistry

The redox proteins (enzymes), such as hemoglobin (Hb), horseradish peroxidase (HRP) and glucose oxidase (GOx) were immobilized on the surface of the carbon nanotube modified with glassy carbon (CNT/GC) electrode, respectively. The experimental results showed that the redox proteins (enzymes) underwent effective and stable direct electron transfer reaction at the surface of CNT/GC electrode with a pair of nearly symmetrical redox peaks in phosphate buffer solution. The formal redox potential, E^0' , is almost independent on the scan rates, the average value of E^0'  for Hb, HRP and GOx is -0.343±0.001, -0.319±0.002 and -0.456±0.001 V (vs.SCE,pH 6.9), respectively. …

Exceptional Electrochemical Activities Of Amorphous Fe-B And Co-B Alloy Particles Used As High Capacity Anode Materials, Ya-Dong Wang, Xin-Ping Ai, Han-Xi Yang

Journal of Electrochemistry

Ultrafine amorphous alloy particles (UAAP) of Fe-B and Co-B were synthesized and tested for possible use as electroactive anode materials. It is found that unlike their parent elements, the alloy particles of transition metal (TM) and boron, the Fe-B and Co-B showed superior electrochemical activities when used as anodic materials in aqueous alkaline solution. The discharge capacities of Fe-B and Co-B electrodeswere observed to be 1200 mAh/g and 1100 mAh/g at moderately high rate of 100 mAh/g, respectively, much higher than the theoreticalcapacity of currently used zinc metal (820 mAh/g). The exceptional high capacities of the boride alloys were probably …

Stability And Electrochemical Performance Of Nio Cathode Modified By Zno Additive For Mcfc In Molten Carbonates, Bo Huang, Fei Li, Qing-Chun Yu, Gang Chen, Ke-Ao Hu

Journal of Electrochemistry

The ZnO/Ni composite cathode was fabricated by tape-casting method, which microstructures and phases were studied. The electrochemical behaviors of ZnO impregnated NiO cathodes were also evaluated in molten 62 mol%Li₂CO₃ + 38 mol%K₂CO₃eutectic at 650 ℃ by electrochemical impedance spectroscopy (EIS) as a function of ZnO content and immersion time. The ZnO impregnated nickel cathodes showed the similar porosity, pore size and morphology to the reference nickel cathode. The stability tests of ZnO impregnated NiO cathodes showed that the ZnO additive could dramatically reduce the solubility of NiO in a eutectic carbonate mixture …

Structures And Redox Activities Of Poly(M-Methoxyaniline), Yun-You He, Yi-Ting Xu, Li-Zong Dai, Jean-Yves Gal, Hui-Huang Wu

Journal of Electrochemistry

Poly(m-methoxyaniline), PmMAn, was prepared in the presence of HCl, p-toluene-sulfonic acid and perchloric acid. By using cyclic voltammetry, the effect of different acid dopant on electrochemical activities of PmMAn was studied. The results showed that perchloric acid is the best acid to prepare PmMAn with good electrochemical activities The FTIR spectra indicate that the acid radical anions have embedded into PmMAn molecularchain as counter-ion during synthetic process, and this great influences the redox activities of PmMAn. SEM and XRD measurements illustrate that PmMAn is characterized by its typical molecular crystalline being monoclinic.

Study On Electrochemical Properties Of Peo-Based Composite Polymer Electrolytes, Hong-Yan Du, Hu Cheng, Yong Yang

Journal of Electrochemistry

Composite polymer electrolytes were prepared by introducing nano-scale SiO₂ into PEO₈-LiClO₄ matrix. The ionic conductivity, lithium transference number and the electrochemical stability windows were measured. The phase component was evaluated with DSC techniques. The results showed that the introduction of nano fillers enhanced the ionic conductivity. It reached 4.3×10^-5 S·cm^-1 at 22 ℃. The conductivity enhancement of the composite polymer electrolytes is analyzed and proposed.

Study On Reduction Process Of Electrolyic Manganese Dioxide In Situ By Ultraviolet-Visible Absorption Spectroscopy, Li-Cai Zhu, Zhong-Zhi Yuan, Wei-Shan Li

Journal of Electrochemistry

The concentrationsof soluble Mn(Ⅲ) species, during the reduction ofelectrolytic MnO₂ (EMD) in alkaline solution,have been monitored in situ by UV-visible spectroscopy. The concentration of Mn(Ⅲ) ion in solution changes with discharge time. The first electron discharge process of EMD can be described by three different steps: 1) the reduction of Mn⁴⁺ ions on the surface of EMD particles and the structural defect regions within the EMD, 2) the reduction of Mn⁴⁺ ions in ramsdellite, 3)the reduction of Mn⁴⁺ ions in pyrolusite. During the second electron discharge of EMD, the soluble Mn(Ⅲ) is reduced to Mn(Ⅱ) , …

Study Of Anti-Corrosion Property On Poly(An-Co-Oas)/Epoxy, Qing-Wu Wang, Geng-Chao Wang

Journal of Electrochemistry

Polyaniline, polyanisidine and their copolymer poly(An-co-oAs) were synthesized via the solution chemical oxidative polymerization of aniline and anisidine in an acidic aqueous medium, and their properties and structure were characterized. The electrochemical method were applied to evaluate the corrosion behavior of tined iron uncoated or coated by polyaniline, poly(An-o-oAs), polyanisidine and poly(An-co-oAs)/epoxy blend in acid or saline aqueous solution. The result showed that with the increase of anisidine content, the solubility of polymers is improved apparently but their oxidation extent decreases accordingly. It is also founded that polyaniline, poly(An-co-oAs) and polyanisidine all have good anti-corrosion properties, and their anti-corrosion capacity …

The Matching Study Of Electrodes In C/Ni(Oh)2 Hybrid Capacitor, Yue-Feng Su, Feng Wu

Journal of Electrochemistry

The energy storage mechanisms of electrochemical double-layer capacitor (EDLC) and C/Ni(OH)₂ hybrid capacitor had been studied. The results proved that,the difference between the capacity of EDLC and C/Ni(OH)₂ hybrid capacitor was detemined by the effectiveness usage of the activated carbon negative electrode, which is a criterion to estimate or design the theoretic capacity of the C/Ni(OH)₂ hybrid capacitor. The electrochemical availability of activated matter in Ni(OH)₂ electrode was introduced, and the quantity of the activated matter in Ni(OH)₂ electrode should be compatible with the capacity of carbon electrode. When the capacities of Ni(OH)₂ electrode …

Electrodeposition Of Copper Into Trenches Under Rotating Hydrodynamic Condition, Jian-Jun Sun, Bu-Gao Xie, Wen-Hui Yin, Guo-Nan Chen

Journal of Electrochemistry

Silicon chips patterned with treneches were fixed onto a rotating electrode. Copper was electrodeposited into the trenches under rotating hydrodynamic conditions The sizes of the trenches are 1 m in height and 0.35 m, 0.50 m and 0.70 m in width, respectively. The effects of rotating of the chip, the current density and the concentration of Cu²⁺ on the filling of thetrenches were studied. It is found that lower current density and moderate concentration of Cu²⁺ resulted in a void free filling of the trenches.