Engineering Commons^™

Long-Term Mechanical Behavior Of Yucca Mountain Tuffs, And Its Variability, Jaak J.K. Daemen, George Danko, Jaime Gonzalez, Amy J. Smiecinski, Raymond E. Keeler

Publications (YM)

We propose to continue the investigation of the long term strength of Yucca Mountain tuffs, with particular emphasis on tuffs from and near the emplacement horizon. We propose to also continue and expand the investigation of the spatial variability of rock strength and stiffness. An intrinsic component of this planned rock testing is the testing of rock joints. Although the emphasis is on tests aimed at determining long term strength, as part of the testing measurements of stiffness also are collected, and will be collected, reported, and analyzed.

Automated Motion Synthesis For Virtual Choreography, Gazihan Alankus, A. Alphan Bayazit, O. Burchan Bayazit

All Computer Science and Engineering Research

In this paper, we present a technique to automati-cally synthesize dancing moves for arbitrary songs. Our current implementation is for virtual characters, but it is easy to use the same algorithms for entertainer robots, such as robotic dancers, which fits very well to this year’s conference theme. Our technique is based on analyzing a musical tune (can be a song or melody) and synthesizing a motion for the virtual character where the character’s movement synchronizes to the musical beats. In order to analyze beats of the tune, we developed a fast and novel algorithm. Our motion synthesis algorithm analyze library …

Development Of A Mechanistic Understanding Of High-Temperature Deformation Of Alloy Ep-823 For Transmutation Applications: Final Progress Report (September 2003 – August 2004), Ajit K. Roy, Brendan O'Toole

Transmutation Sciences Materials (TRP)

The purpose of this task is to evaluate the tensile properties of three martensitic alloys namely, Alloys EP-823, HT-9 and 422 at temperatures relevant to the transmutation processes. Testing has been performed to evaluate the tensile properties of all three alloys at temperatures ranging from ambient to 600^°C. The test materials were thermally-treated (quenched and tempered) prior to the evaluation of their tensile properties. The deformation characteristics of these tensile specimens, upon completion of testing, were evaluated by scanning electron microscopy (SEM). Efforts were also made to identify and characterize defects such as dislocations using transmission electron microscopy …

Surface Temperature And Spectral Measurements At Santiaguito Lava Dome, Guatemala, Steve T. M. Sahetapy-Engel, Luke P. Flynn, Andrew J. L. Harris, Gregg J. Bluth, William I. Rose, Otoniel Matias

Department of Geological and Mining Engineering and Sciences Publications

An infrared thermometer, spectroradiometer and digital video camera were used to observe and document short-term evolution of surface brightness temperature and morphology at Santiaguito lava dome, Guatemala. The thermometer dataset shows 40–70 minute-long cooling cycles, each defined by a cooling curve that is both initiated and terminated by rapid increases in temperature due to regular ash venting. The average cooling rate calculated for each cycle range from 0.9 to 1.6°C/min. We applied a two-component thermal mixture model to the spectroradiometer (0.4–2.5 μm) dataset. The results suggest that the observed surface morphology changed from a cool (120–250°C) crust-dominated surface with high …

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements: Quarterly Progress Report (June 01 – August 31, 2004), Ajit K. Roy

Transmutation Sciences Materials (TRP)

Highlights of Test Results:

• Residual stress measurements by the RC method on cold-worked specimens showed tensile residual stresses in austenitic stainless steel. However, compressive residual stresses were observed in martensitic stainless steel. This difference may be attributed to the difference in metallurgical phases and microstructures resulting from different thermal treatments imparted to them.

• Residual stress measurements by both ND and RC techniques on welded specimens showed similar patterns. Welded specimens consisting of similar material showed tensile residual stresses in the vicinity of the fusion line (FL). However, welded specimens consisting of dissimilar materials (austenitic and martensitic stainless steel …

Solvent And Method For Extraction Of Triglyceride Rich Oil, Shubhender Kapila, Paul Ki-Souk Nam, V. J. Flanigan

Chemistry Faculty Research & Creative Works

The present invention relates to a solvent for use in extracting oil from an oil bearing material, such as soybeans, with the solvent resulting in the selective extraction of a triglyceride rich oil, which contains 95% or greater triglycerides and non-polar constituents, with the solvent comprised of a hydrocarbon, preferably hexane, and a fluorocarbon, so that the solvent has a viscosity less than 2.6 centipoise and a polarity of less than 0.1. The present invention also relates to a method of using the solvent to extract the triglyceride rich oil, with the method including preferably extracting the oil at a …

Wide Angle Decentered Lens Beam Steering For Infrared Countermeasures Applications, Jennifer L. Gibson, Bradley D. Duncan, Edward A. Watson, John S. Loomis

Electro-Optics and Photonics Faculty Publications

A beam-steering system consisting of three cemented achromatic doublets is presented. Intended for use in IR countermeasure applications, our system is designed to operate over the 2- to 5-μm spectrum with minimum angular dispersion. We show that dispersion can be minimized by using doublet lenses fashioned from AMTIR-1 and germanium. Our system is designed to be compact and lightweight, with no internal foci, while allowing steering to ±22.5 deg. We also maintain a minimum 2-in. clear aperture for all steering angles, and a nominal divergence of 1 mrad. Plane wave and Gaussian beam analyses of our system are presented.

Lean Energy Analysis: Identifying, Discovering And Tracking Energy Savings Potential, J. Kelly Kissock, John Seryak

Mechanical and Aerospace Engineering Faculty Publications

Energy in manufacturing facilities is used for direct production of goods, space conditioning, and general facility support such as lighting. This paper presents a methodology, called lean energy analysis, LEA, for graphically and statistically analyzing plant energy use in terms of these major end uses.

The LEA methodology uses as few as 60 easily obtainable data points. Multivariable change-point models of electricity and natural gas use as functions of outdoor air temperature and production data are developed. The statistical models are used to subdivide plant energy use into facility, space-conditioning and production-related components.

These breakdowns suggest the savings potential from …

Santa Clara Magazine, Volume 46 Number 2, Fall 2004, Santa Clara University

Santa Clara Magazine

8 - PRIZE-WINNING POETRY By Alexander Matthew Weyand '04. A poem by an SCU junior wins two student poetry competitions at SCU.

10 - I HAVE A QUESTION By Miriam Schulman. The director of communications for the Markkula Center for Applied Ethics at SCU explores the ethics of Internet research.

14 - JUSTICE IS SERVED By Susan Vogel. The Santa Clara University Community Law Center celebrates 10 years of service with a new endowment and a new name.

Computational Approaches To The Design And Analysis Of Stability Of Polypeptide Multilayer Thin Films, Bin Zheng

Doctoral Dissertations

The focus of this research is the development of computational approaches to understanding the physical basis of layer-by-layer assembly (LBL), a key methodology of nanomanufacturing. The results provided detailed information on structure which cannot be obtained directly by experiments.

The model systems chosen for study are polypeptide chains. Reasons for this are that polypeptides are no less polyelectrolytes than the more usual polyions, and one can control the primary structure of a polypeptide on a residue-by-residue basis using modern synthetic methods. Moreover, as peptides constitute one of the four major classes of biological macromolecules, research in this direction is expected …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 21, Number 2, October 2004, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

An eight page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Ceg 361/561-01: Introduction To Software Testing, John A. Reisner

Computer Science & Engineering Syllabi

This course covers software testing strategies, along with established best practices, so students learn how to test their software in a complete and systematic (vice ad-hoc) manner. Particular attention is paid to planning, writing, and executing software testing documentation, i.e., software test plan, to include documented results. Various projects are assigned, designed to illustrate various challenges associated with software testing, and to reinforce the strategies and techniques used to overcome these challenges.

Cs 410/610: Theoretical Foundations Of Computing, Thomas Sudkamp

Computer Science & Engineering Syllabi

This course is an introduction to one of the fundamental topics in the theory of computer science: computability theory. Computability theory is concerned with determining whether there is an algorithmic solution to a problem. The study of computability uses the Turing machine as the basic computational model. A Turing machine is a random access, read-write, finite state automaton. The Church-Turing thesis asserts that any problem that can be solved in any algorithmic manner can be solved by a Turing machine.

Ceg 770: Computer Engineering Mathematics, Yong Pei

Computer Science & Engineering Syllabi

Computer Engineering and Science students need proficiency in relevant applied mathematics to be able to discover and model difficult real-world computer engineering and science problems. The relationship of these problems to mathematical theory will be discussed. This course provides an introduction to linear and nonlinear programming, queueing theory, mathematics of signal processing, difference equations, and related differential and matrix equations. In addition to mathematical theory, appropriate applications will be presented.

Cs 240: Introduction To Computer Science I, Dale E. Nelson

Computer Science & Engineering Syllabi

No abstract provided.

Ceg 434/634: Concurrent Software Design, Thomas C. Hartrum

Computer Science & Engineering Syllabi

This course provides an introduction to concurrent program design in the UNIX environment. Classical problems of synchronization, concurrency, and their solutions are examined through course projects and through readings on operating system design.

Ceg 449/699: Mobile Computing, Yong Pei

Computer Science & Engineering Syllabi

This senior/graduate course provides an in-depth study of networking protocol and system design in the area of wireless networking and mobile computing. It will help students in the networking area establish a solid foundation in wireless networking protocols, fundamental concepts and principles. It will also introduce students to a few hot topics in wireless networking and mobile computing research.

The course will start with a review over fundamental design challenges, architectural principles and philosophy for the Internet and heterogeneous networks. The focus will then move on to an in-depth examination of wireless networking protocols, and system design techniques for mobile …

Ceg 220: Introduction To C Programming For Engineers I, Ronald F. Taylor

Computer Science & Engineering Syllabi

This course provides a general introduction to computers as a problem solving tool using the C programming language. Emphasis is on algorithms and techniques useful to engineers. Topics include data representation, debugging, and program verification. Some programming assignments may involve complex arithmetic and trigonometric exponential functions.

Ceg 360/560 Ee 415/651: Digital System Design, Travis E. Doom

Computer Science & Engineering Syllabi

Design of digital systems. Topics include flip-flops, registers, counters, programmable logic devices, memory devices, register-level design, and microcomputer system organization. Students must show competency in the design of digital systems. 3 hours lecture, 2 hours lab. Prerequisite: CEG 260.

Cs 405/605: Introduction To Database Management Systems, Soon M. Chung

Computer Science & Engineering Syllabi

Survey of logical and physical aspects of database management systems. Entity Relationship, relational, object-oriented models for databases are presented. Physical implementation methods are discussed.

Cs 784: Programming Languages, Krishnaprasad Thirunarayan

Computer Science & Engineering Syllabi

This course introduces concepts related to the specification and design of high-level programming languages. It discusses different programming paradigms, algebraic specification and implementation of data types, and develops interpreters for specifying operationally the various programming language features/constructs. It also introduces attribute grammar formalism and axiomatic semantics briefly. The programming assignments will be coded in Scheme.

Cs 409/609: Principles Of Artificial Intelligence, Michael T. Cox

Computer Science & Engineering Syllabi

"Principles of Artificial Intelligence" is a graduate/undergraduate level introductory course in Artificial Intelligence (AI), designed for students interested in or specializing in AL We will cover several basic topics ranging from knowledge representation, inference, problem solving, search, the predicate calculus and other fundamentals of AI, to selected topics concerning intelligent agents, natural language processing, planning, learning, and case-based reasoning. The intent of the course is to provide a background in artificial intelligence, an exposure to the major issues and methods in the field, and experience in writing AI programs. The course will also examine real AI systems and allow the …

Cs 480/680: Comparative Languages, Krishnaprasad Thirunarayan

Computer Science & Engineering Syllabi

No abstract provided.

Cs 205: Computer Literacy And Office Automation, Kim Gros

Computer Science & Engineering Syllabi

To understand basic computer operations and the principal components of a computer and connected peripheral devices

To understand and examine current operating systems, software utilities, device drivers and application software

To define and understand current storage technology and learn about logical file storage and management

To become proficient in using application software categories that are covered in the seven modules

To understand the basics of e-mail

To introduce networking concepts including the Internet and its components and web browser basics

To learn ways to protect your data and avoid computer disasters

Ceg 460/660: Introduction To Software Computer Engineering, Robert J. Weber

Computer Science & Engineering Syllabi

This course is concerned with the techniques of designing and constructing large programs. Some of the required basic concepts necessarily have to be developed using small programs as examples. To this extent, we also study programming-in-the-small. The overall objectives are to present an overview of issues in the development of software, to discuss terminology, to illustrate via example case studies, and to give sufficiently detailed advice on how to develop quality software. Hands-on experience is emphasized through the use of homework and a class project.

Cs 780: Compiler Design And Construction I, Krishnaprasad Thirunarayan

Computer Science & Engineering Syllabi

This course deals with the theory and practice of compiler design. Topics emphasized are scanning and parsing. If time permits, semantic analysis will also be covered.

Cs 208: Computer Programming For Business With Java, I, Robert Rea

Computer Science & Engineering Syllabi

CS 208 is the first of a two quarter sequence in programming for business students. It is required for Management Information Science majors. The courses are designed to help students achieve an intermediate-level of programming in Java. This course assumes students have never written a program before.

Ceg 702: Advanced Computer Communications, Daniel C. Lee

Computer Science & Engineering Syllabi

The general objective of this graduate-level course on advanced computer communication and networking technologies is to develop students' abilities to (1) conduct research in the area of computer networks and (2) innovate network technologies. This objective will be achieved through a reading/lecture/discussion component and a project component. In particular, we will read papers on various aspects of advanced computer networking, e.g., routing, admission control, congestion/flow control, queuing theory, link scheduling, internetworking, wireless technologies, quality of service, and peer-to-peer networks. We will also learn how to apply (mathematical) optimization to networking.

Cs 340: Programming Language Workshop In Java, Ronald F. Taylor

Computer Science & Engineering Syllabi

This course is designed as a self-study in Java. You are expected to work independently to learn the Java language and solve a set of programming problems assigned to you using latest Java SDK available at http://fuva.stm.com. There are no exams. We officially meet only once in a quarter. However, I will be available in the posted office hours for clarifications and general discussion of the programming assignments. Do not expect support in debugging badly documented code.

Ceg 720: Computer Architecture I, Soon M. Chung

Computer Science & Engineering Syllabi

Review of sequential computer architecture and study of parallel computers. Topics include memory hierarchy, reduced instruction set computer, pipeline processing, multiprocessing, various parallel computers, interconnection networks, and fault-tolerant computing. 3 hours lecture and 2 hours lab.