Engineering Commons^™

Numerical Integration Strategy For Generating Root Migration Diagrams, Deepak H. Panduranga

Mechanical & Aerospace Engineering Theses & Dissertations

Evans root locus is a graphical method for analyzing or designing the stability and performance of a single channel closed-loop system. The method consists of plotting the locus of closed-loop characteristic equation roots in the complex plane as the loop gain parameter is varied over a wide range of values. Several methods for plotting the root locus graph exist and can be mainly classified into two types: analytical methods and numerical methods. The most common numerical method is based on polynomial factoring or root solving. A less common, alternative method for generating the root locus graph is based on numerical …

Afci Quarterly Input – Unlv July 1 Through September 30, 2005, Harry Reid Center For Environmental Studies. Nuclear Science And Technology Division

Transmutation Research Program Reports (TRP)

Quarterly report highlighting research projects, activities and objectives of the Transmutation Research Program at the Nuclear Science & Technology Division, Harry Reid Research Center.The University of Nevada, Las Vegas supports the AFCI through research and development of technologies for economic and environmentally sound refinement of spent nuclear fuel. The UNLV program has four components: infrastructure, international collaboration, student-based research, and management and program support.

Structured Object-Oriented Co-Analysis/Co-Design Of Hardware/Software For The Facts Powers System, Matt Ryan, Sojan Markose, Xiaoqing Frank Liu, Bruce M. Mcmillin

Computer Science Faculty Research & Creative Works

There are several approaches to the hardware/software design in embedded systems, ranging from the traditional sequential methods which focus on the determination of the hardware architecture prior to software design, to newer object-oriented approaches that attempt to apply software engineering methods to hardware design without a systematic process. This paper discusses a structured object-oriented methodology for the integrated co-analysis and co-design of hardware/software systems using an extended high order object-oriented modeling technique (HOOMT). This methodology offers a uniform method for hardware and software developers to jointly develop the specifications for and partitioning of the hardware and software components of a …

A Motion Planning Processor On Reconfigurable Hardware, Nuzhet Atay, Burchan Bayazit

All Computer Science and Engineering Research

Motion planning algorithms enable us to find feasible paths for moving objects. These algorithms utilize feasibility checks to differentiate valid paths from invalid ones. Unfortunately, the computationally expensive nature of such checks reduces the effectiveness of motion planning algorithms. However, by using hardware acceleration to speed up the feasibility checks, we can greatly enhance the performance of the motion planning algorithms. Of course, such acceleration is not limited to feasibility checks; other components of motion planning algorithms can also be accelerated using specially designed hardware. A Field Programmable Gate Array (FPGA) is a great platform to support such an acceleration. …

The Open Network Laboratory (A Resource For High Performance Networking Research), John Dehart, Fred Kuhns, Jyoti Parwatikar, Jonathan Turner, Ken Wong

All Computer Science and Engineering Research

The Open Network Laboratory (ONL) is a remotely accessible network testbed designed to enable network researchers to conduct experiments using high performance routers and applications. ONL™s Remote Laboratory Interface (RLI) allows users to easily configure a network topology, initialize and modify the routers™ routing tables, packet classification tables and queuing parameters. It also enables users to add software plugins to the embedded processors available at each of the routers™ ports, enabling the introduction of new functionality. The routers provide a large number of built-in counters to track various aspects of system usage, and the RLI software makes these available through …

The Effect Of Particles On Dynamic Recrystallization And Fabric Development Of Granular Ice During Creep, Min Song, Ian Baker, David M. Cole

Dartmouth Scholarship

The mechanical behavior and microstructural evolution of laboratory-prepared, particle-free fresh-water ice and ice with 1 wt.% (~0.43 vol.%) silt-sized particles were investigated under creep with a stress level of 1.45 MPa at −10°C. The particles were present both within the grains and along the grain boundaries. The creep rates of specimens with particles were always higher than those of particle-free ice. Dynamic recrystallization occurred for both sets of specimens, with new grains nucleating along grain boundaries in the early stages of creep. The ice with particles showed a higher nucleation rate. This resulted in a smaller average grain-size for the …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 22, Number 1, September 2005, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A ten page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Analysis Of Per Capita Expenditures Of Suburbanizing Communities In Maine, New England Environmental Finance Center

Economics and Finance

This study analyzes per capita expenditure trends among selected fast-growing Maine towns from 1970-2004. The ten communities studied are termed as “suburbanizing” towns. This term is used to describe towns that over the past 30-40 years have been in the process of transition from rural to suburban – in terms of their population and housing densities, their forms of government, and the services they provide, as well as other characteristics.1 Such towns are of particular interest because they have been absorbing a healthy percentage of the state’s population growth during this time period, often at the expense of Maine’s service …

Laser And Led Effects On The Proliferation Rate Of Periodontal Ligament Fibroblasts, Allen J. Job

Loma Linda University Electronic Theses, Dissertations & Projects

PURPOSE: To compare the effectiveness of a Gallium Aluminum Arsenide (GaAlAs) diode laser and a light emitting diode (LED) on periodontal ligament fibroblast cell proliferative rates.

METHODS and MATERIALS: PDLF obtained from freshly extracted permanent teeth were cultured under standard conditions until a subconfluent monolayer was present. The next section took 5 days to complete. On day 1, the initial cell concentration of 700 uL/cm² was plated on 96-well assay plates and placed in a CO₂ incubator at 37° C for 24 hours. On day 2, cell counts were first verified using hemocytometry then were irradiated using an …

Partial Adjustable Autonomy In Multi-Agent Environment And Its Application To Military Logistics, Hoong Chuin Lau, Lucas Agussurja, Ramesh Thangarajoo

Research Collection School Of Computing and Information Systems

In a rapidly changing environment, the behavior and decision-making power of agents may have to be adaptive with respect to a fluctuating autonomy. In this paper, a centralized fuzzy approach is proposed to sense changes in environmental conditions and translate them to changes in agent autonomy. A distributed coalition formation scheme is then applied to allow agents in the new autonomy to renegotiate to establish schedule consistency. The proposed framework is applied to a real-time logistics control of a military hazardous material storage facility under peace-to-war transition.

Solving Generalized Open Constraint Optimization Problem Using Two-Level Multi-Agent Framework, Hoong Chuin Lau, Lei Zhang, Chang Liu

Research Collection School Of Computing and Information Systems

The Open Constraint Optimization Problem (OCOP) refers to the COP where constraints and variable domains can change over time and agents' opinions have to be sought over a distributed network to form a solution. The openness of the problem has caused conventional approaches to COP such as branch-and-bound to fail to find optimal solutions. OCOP is a new problem and the approach to find an optimal solution (minimum total cost) introduced in [1] is based on an unrealistic assumption that agents are willing to report their options in nondecreasing order of cost. In this paper, we study a generalized OCOP …

Operator State Estimation For Adaptive Aiding In Uninhabited Combat Air Vehicles, Christopher A. Russell

Theses and Dissertations

This research demonstrated the first closed-loop implementation of adaptive automation using operator functional state in an operationally relevant environment. In the Uninhabited Combat Air Vehicle (UCAV) environment, operators can become cognitively overloaded and their performance may decrease during mission critical events. This research demonstrates an unprecedented closed-loop system, one that adaptively aids UCAV operators based on their cognitive functional state A series of experiments were conducted to 1) determine the best classifiers for estimating operator functional state, 2) determine if physiological measures can be used to develop multiple cognitive models based on information processing demands and task type, 3) determine …

Quantified Model Of Cobit For Corporate It Governance, M. Sibghatullah Siddiqui, Dr. Syed Jamal Hussain

International Conference on Information and Communication Technologies

Now organizations are more concerned about the appropriate IT governance. The growing dependency on IT due to the increasing volume of business process automation further challenges the role of Information System Auditor. IT Governance Institute has developed COBIT1 as a model for this purpose [1][2]. The model proposed in this research quantifies the COBIT by developing matrices for all four domains of COBIT; hence it provides a quantitative approach for better implementation of corporate IT governance through effective audit and control.

Poster Session A: A Multi-Priority Application Framework For Mobile Ad Hoc Networks, M. Ibrahim Channa, Ahsan Chaudhry, Kashif Sharif, Irum Memon

International Conference on Information and Communication Technologies

The fast spread of small wireless computers has enabled the design and deployment of wireless Ad Hoc networks. Typical applications proposed for such networks include both Real Time and Non-Real Time applications. We propose an architecture that provides a complete framework for Real Time applications and Best Effort traffic. The proposed architecture comprises of an Ad Hoc Routing Protocol for route setup and route repair, a Bandwidth Allocation and Reservation Scheme for Real Time traffic, and a MAC layer protocol that provides traffic differentiation. The Admission Control module is used to admit or reject a new Real Time flow request …

Surface And Sructure Investigations Of Membrane Electrode Assembly In Dmfc Lifetime Testing, Xuan Cheng, Cheng Peng, Meng-Di You, Jing Liu, Ying Zhang

Journal of Electrochemistry

The lifetime and performance of a direct methanol fuel cell (DMFC) were investigatedto understand the correlation between thestructure of catalysts/membrane and cell performanceversus time. The cell polarization and performance curves were obtained during the DMFC operation with the time. The catalysts and Nafion membrane of the membrane electrode assembly (MEA) from the lifetime test were comprehensively examined by XRD, HRTEM, FTIR and Raman spectroscope techniques. The results revealed that there was significant performance degradation during the first 200 hours operation; while the degradation was slowing down between 200 and 704 hours operation. The degradation became worse after 1002 h operation. …

Effect Of Chloride Ions On The Corrosion Behavior Of Reinforcing Steel In Simulated Concrete Pore Solutions, Yu Liu, Rong-Gui Du, Chang-Jian Lin

Journal of Electrochemistry

The potentiodynamic anodic polarization was used to study the corrosion behavior of the reinforcing steel in simulated concrete pore solutions with different pH and chloride ion concentrations. The effect of chloride ions on passivity breakdown of the steel was examined by measuring the breaking potentials of reinforcing steel, and the critical chloride concentrations for depassivation were found in simulated concrete pore solutions at pH 12.50 and pH 12.00.

Effects Of Aluminide And Platinum-Aluminide Coatings On The Hot Corrosion Behavior Of Mar-M247 Nickel-Based Superalloy, I.K. Lee, W.T. Tasi, J.T. Lee

Journal of Electrochemistry

This study is to investigate the high temperature hot corrosion behavior of aluminide coating and platinum-aluminide coating on Ni-base superalloy MAR-M247. On the platinum-aluminide, aluminide and the base metal, respectively, by the salt spraying method. The resistances to hot corrosion of platinum-aluminide coating, aluminide coating and the base metal were evaluated by the variations of weight gains. Aluminide and platinum-aluminide coating showed significanty beneficial effect on inhibiting the hot corrosion of MAR-M247. But that of the platinum-aluminide coating was even much better. The aluminide coating surface was composed of β-NiAl, and that of the platinum-aluminide coating was PtAl₂. …

The Research Of Nano-Sized Nio Anode Materials For Lithium Ion Batteries, Jun-Mei Yan, Jing Zhang, Yong Yang

Journal of Electrochemistry

The nano-sized NiO materials were synthesized by solid phase method and sol-gel method. The synthesis conditions were optimized by DSC and TG techniques. The sol-gel method was optimized by changing the solvent and regulating the solution's pH for preparing NiO material. The structure and morphology of the materials were also characterized by means of XRD and TEM techniques, and the electrochemical performances of the materials were studied by the galvanostatically charge and discharge experiments.

An Electrochemical Behavior Of Limn2O4 Electrode In Electrolyte Based On Room Temperature Ionic Liquid, Hong-He Zheng, Lei Shi, Shu-Yan Gao, Jian-Ji Wang

Journal of Electrochemistry

The electrochemical behavior of spinel LiMn₂O₄ electrode in ionic liquid electrolyte was investigated by using cyclic voltammetry, galvanostatic charge-discharge and ACimpedance techniques. The results reveal that the spinel LiMn₂O₄ can be effectively cycled in electrolyte based on the ionic liquid with discharge capacity of 108.2mAh/g and Coulombic efficiency of more than 90% in the first cycle at room temperature. Temperature and current density play an important role in the electrode performances. The activation energy for lithium ion transfer through interface between the electrode and the electrolyte was evaluated by AC impedance spectroscopy. The high …

Surface-Enhanced Raman Spectra Of Cytosine Adsorbed On A Roughened Gold Electrode, Yuan-Fei Wu, Jian-Feng Li, De-Yin Wu, Bin Ren, Zhong-Qun Tian

Journal of Electrochemistry

Cytosine adsorbed on a roughened gold electrode has been investigated by using electrochemical cyclic voltammetry and surface-enhanced Raman spectroscopy (SERS). The results indicate that cytosine was adsorbed on the Au electrode in a perpendicular orientation via the N3 position. As the maximum enhancement of ring breathing mode appears at negative potentials compared with other modes, both the electromagnetic enhancement and the charge transfer mechanism were considered to contribute to the SERS intensity. The binding interaction between cytosine and the gold electrode was weakened when the potential was negatively moved. The result also indicates that the SERS technique can be used …

Investigation, On The Accelerated Dissolution Of Metal Induced By Afm Tip Scratching And Suppressed By Inhibitors, Jun-E Qu, Xing-Peng Guo

Journal of Electrochemistry

The accelerated dissolution behavior of Cu-Ni alloy induced by AFM tip scratching and the inhibition effect of corrosion inhibitors were investigated. The results showedthat, with a tip loading of 750nN, continuous scan for 30 min in a contact mode on 4×4 μm² of copper-nickel alloy in 1.5mol/L NaCl and 0.01mol/L HCl could enhance the dissolution of the sample and produced pits on the scratched area. Adding inorganic inhibitors, sodium chromateand organic inhibitor dodecylamine, to the solution suppressed the dissolution of copper-nickel alloyinduced by tip scratching, respectively, by improving the surface passivationperformance of metal surface and forming adsorption films on …

Electrocatalytic Oxidation And Degration Of Active Red X-3b By Nanotubes Catalytic Electrodes, Yi Wen, Jian-Hui Fang, Wei-Min Cao, Li-Yi Shi

Journal of Electrochemistry

The catalytic splitting decomposition of carbon nanotubes isprocessed by dispersing with dilute nitric acid and thermal oxidation. Then well-proportionedphenolic resin is mixed in the carbon nanotubes. Then, the carbon nanotubesare made into electrodes by hot-press molding after the process of milling with high speed. The surface of the carbon nanotubes electrodes is analyzed by SEM. Active red X-3B simulated waster water is disposed by carbon nanotubes catalyticelectrode (anode) and stainless steel(cathode). The influencing factors of degradation by current density, concentrationof electrolyte, systemtemperature and pH are investigated. The experimental results indicated that acidiccondition is propitious tothe degradationreaction of organicdyestuff and wastewater …

Effect Of Sintering Temperatures On Synthesis Of Mgco0.4Mn1.6O4 Positive Materials In Magnesium Ion Battery, Xiu-Ling Gao, Li-Fang Jiao, Hua-Tang Yuan, Jian-Sheng Cao, Ming Zhao, Hai-Xia Li, Yong-Mei Wang

Journal of Electrochemistry

The cathode material MgCo_0.4Mn_1.6O₄ for magnesium ion battery was synthesized by sol-gel method. The TG-DTA and XRD analyses showed that the prepared samples has simple spinel structure. Effect of annealing temperature on electrochemical properties was researched. The result shows that the sample sintered at 700℃ has the best electrochemical properties.

Electrochemical Reduction Characteristics Of Nitrobenzene At The Copper Electrode, Jin-Hong Fan, Wen-Ying Xu, Ting-Yao Gao

Journal of Electrochemistry

The electrochemical reduction characteristics and transition steps of nitrobenzene aqueous solution at the copper electrode, as well as its reduction mechanism were extensively investigatedby using the techniques such as cyclic voltammetry (CV) and linear scan voltammetry (LSV). The results showed that the reduction peaks of nitrobenzene at the copper electrode were located at 0.58 V and 1.32 V or so (vs. SCE), both acidity and alkalinesolutionsfavoredthe reduction of nitrobenzene. The adsorption of compounds followed by the reduction process, which is controlled by the mass transfer step at higher nitrobenzene concentration. In addition, the higher anaerobic degree led to faster reduction …

Research Progresses In A Flow Redox Battery, Quan-Feng Dong, Hua-Min Zhang, Ming-Gang Jin, Ming-Sen Zheng, Ya-Ding Zhan, Shi-Gang Sun, Zu-Geng Lin

Journal of Electrochemistry

As a large scale electrochemical storage device, flow redox battery in which the active materials are flowing electrolytes is different from the common batteries employing solid or gas materials as an electrode. In this paper we introduced flow redox battery in brief, reviewed its development and actual state on (study). The main problem existed in the new device was discussed when viewed with its future developments.

Nafion Emulsion Method For Fuel Cell Membrane-Electrode-Assembly Preparation, Chao-Yang Xia, Lin Zhuang, Jun-Tao Lu

Journal of Electrochemistry

A Nafion emulsion method for fuel cell membrane-electrode-assembly (MEA) preparation was reported for the first time in this paper. 5 %(by mass) Nafion alcohol solution and non-polar solvent (e.g., cyclohexane) were ultrasonicallymixed to produce Nafion emulsion. The catalyst ink prepared using the thus-obtained Nafion emulsion can be directly cast onto Nafion membrane to make MEA. This method is simple in operation, and effectively preventsthe Nafion membrane swelling, hence is suitable for large-scale application. The MEA thus-prepared showed comparable catalyst efficiencywith respect to the popular transfer-method, and the preliminary performance in room-temperature H₂/O₂ fuel cell test was satisfying.

The Growth Of Aluminide-Layer During The Hot-Dipping Al-(Si) Coating Onto 430 Stainless Steels, Peng-Chicao Chen, Chaur-Jeng Wang, Yu-Chang Lin, Hsuan Ching

Journal of Electrochemistry

The 430 stainless steels have been hot dipped in the molten Al-6.5%Si melts from 680 to 800℃, respectively. The effects of the hot dipping temperature and time on the thickness of the internal alloy layer have been investigated. The activation energy of the growth kinetic of aluminized layer was also calculated. The results showed that the thickness of aluminized layer increased with increasing dipping time and temperature. Besides, the growth kinetic of aluminized layer obeys parabolic rate law. The FeAl₃ and Fe₂Al₅ were formed by the inward diffusion, and the interface of intermetallic layer will be …

The Application Of Astm C1202-93 On Evaluating The Performance Of Anti-Corrosion Of Concrete, Yuan-Chen Yuan, Tsung-Yueh Tu, Chao-Lung Hwang

Journal of Electrochemistry

The test of chloride ion penetration based on the standards of ASTM C1202-93 is applied to evaluate the anti-corrosion performance of concrete in this research. Concrete specimens were produced according to ACI 318-89 mixture proportioning design and the Desenfied Mixture Design Algorithm (DMDA) and were measured the 6-hour coulombs at the age of 91 days. Results show that w/b is not the factor influencing chloride penetration of ACI concrete, as the ion penetration of ACI specimens is all higher than 2 000 Coulombs and can even be poorer than 10 000 Coulombs. With a proper amount of pozzolanic material, the …

Cyclic Voltammetry And Surface Enhanced Raman Spectroscopy Of Dissociative Adsorption Of Ethanol On Pt-Ru Electrodes, Bin Zhang, Hai-Hui Zhou, Zu-Biao Wen, Qi-Ling Zhong, Peng Huang, Xiong-Yuan Yang, Bin Ren, Tian

Journal of Electrochemistry

The behaviors of dissociative adsorption of ethanol on roughened platinum-ruthenium electrode with high activity of SERS were studied by using cyclic voltammetry and in-situ surface enhanced Raman spectroscopy, surface enhanced Raman spectra of dissociative adsorption of ethanol on Pt electrode in acid was obtained for the first time. It is shown that the Pt-Ru could lower the over-potential of CO oxidation when compared to Pt electrode. The results show that the ethanol in acid medium can be self-dissociated at Pt-Ru electrode to produce CO, which discourage the further oxidation of ethanol, some information of Pt-C and Pt-C-Pt stretching vibration from …

Adsorption Of Polyaspartic Acid From Sulphur Acid Solution On Carbon Steel And Its Corrosion Inhibition, Rong-Jing Cui, Ning Gu, Chun-Mei Li

Journal of Electrochemistry

The role of Polyaspartic acid in the corrosion inhibition of 45# carbon steel in sulphuric acid solution has been investigated by polarization curve andelectrochemical impedance spectroscopy (EIS). The influences of the concentration and the temperature of PASP on the corrosion inhibition efficiency were determined. The results indicated that the PASP as the corrosion inhibitor mainly inhibitated the anode; within the experiment temperature, the inhibitor efficiency decreased with the raising of the temperature and PASP had a good inhibiting performance at 10℃, the corrosion inhibition efficiency of PASP for carbon steel increased with the increase of the concentration of PASP when …