Engineering Commons^™

University Of Texas At Tyler Catalog, 2006 - 2008, University Of Texas At Tyler

Catalogs

No abstract provided.

Test 1871: John Deere 5203 Diesel 9-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1890: John Deere 8530 Ivt, Nebraska Tractor Test Lab, John Deere

Nebraska Tractor Tests

No abstract provided.

Test 1874: John Deere 8430 Ivt, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1881: Mccormick Xtx 200/Mtx 185 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1882: Mccormick Xtx 215 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1872: John Deere 5303 Diesel 9-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1886: John Deere 8230t Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1888: John Deere 8330t Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Sliver: A Bpel Workflow Process Execution Engine For Mobile Devices, Gregory Hackmann, Mart Haitjema, Christopher Gill, Catalin-Gruia Roman

All Computer Science and Engineering Research

The Business Process Execution Language (BPEL) has become the dominant means for expressing traditional business processes as workflows. The widespread deployment of mobile devices like PDAs and mobile phones has created a vast computational and communication resource for these workflows to exploit. However, BPEL so far has been deployed only on relatively heavyweight server platforms such as Apache Tomcat, leaving the potential created by these lower-end devices untapped. This paper presents Sliver, a BPEL workflow process execution engine that supports a wide variety of devices ranging from mobile phones to desktop PCs. We discuss the design decisions that allow Sliver …

A Theory Of Load Adjustments And Its Implications For Congestion Control, Sergey Gorinsky, Manfred Georg, Maxim Podlesny, Christoph Jechlitschek

All Computer Science and Engineering Research

Multiplicative Increase (MI), Additive Increase (AI), and Multiplicative Decrease (MD) are linear adjustments used extensively in networking. However, their properties are not fully understood. We analyze responsiveness (time for the total load to reach the target load), smoothness (maximal size of the total load oscillations after reaching the target load), fairing speed (speed of convergence to equal individual loads) and scalabilities of MAIMD algorithms, which generalize AIMD algorithms via optional inclusion of MI. We prove that an MAIMD can provide faster asymptotic fairing than a less smooth AIMD. Furthermore, we discover that loads under a specific MAIMD converge from any …

Supporting Collaborative Behavior In Manets Using Workflows, Rohan Sen, Gregory Hackmann, Mart Haitjema, Gruia-Catalin Roman, Gill

All Computer Science and Engineering Research

Groupware activities provide a powerful representation for many collaborative tasks. Today, the technologies that support typical groupware applications often assume a stable wired network infrastructure. The potential for collaboration in scenarios that lack this fixed infrastructure remains largely untapped. Such scenarios include activities on construction sites, wilderness exploration, disaster recovery, and rapid intervention teams. Communication in these scenarios can be supported using wireless ad hoc networks, an emerging technology whose full potential is yet to be understood and realized. In this paper, we consider the fundamental technical issues that need to be addressed in order to introduce groupware concepts into …

Virtualization For A Network Processor Runtime System, Brandon Heller, Jonathan Turner, John Dehart, Patrick Crowley

All Computer Science and Engineering Research

The continuing ossification of the Internet is slowing the pace of network innovation. Network diversification presents one solution to this problem, by virtualizing the network at multiple layers. Diversified networks consist of a shared physical substrate, virtual routers (metarouters), and virtual links (metalinks). Virtualizing routers enables smooth and incremental upgrades to new network services. Our current priority for a diversified router prototype is to enable reserved slices of the network for researchers to perform repeatable, high-speed network experiments. General-purpose processors have well established techniques for virtualization, but do not scale efficiently to multi-gigabit speeds. To achieve these speeds, we employ …

Dynamic Resource Management In A Static Network Operating System, Kevin Klues, Vlado Handziski, David Culler, David Gay, Phillip Levis Levis, Chenyang Lu, Adam Wolisz

All Computer Science and Engineering Research

We present novel approaches to managing three key resources in an event-driven sensornet OS: memory, energy, and peripherals. We describe the factors that necessitate using these new approaches rather than existing ones. A combination of static allocation and compile-time virtualization isolates resources from one another, while dynamic management provides the flexibility and sharing needed to minimize worst-case overheads. We evaluate the effectiveness and efficiency of these management policies in comparison to those of TinyOS 1.x, SOS, MOS, and Contiki. We show that by making memory, energy, and peripherals first-class abstractions, an OS can quickly, efficiently, and accurately adjust itself to …

Addressing Cheating And Workload Characterization In Online Games, Christopher Chambers

Dissertations and Theses

The Internet has enabled the popular pastime of playing video games to grow rapidly by connecting game players in disparate locations. However, with popularity have come the two challenges of hosting a large number of users and detecting cheating among users. For reasons of control, security, and ease of development, the most popular system for hosting on-line games is the client server architecture. This is also the most expensive and least scalable architecture for the game publisher, which drives hosting costs upwards with the success of the game. In addition to the expense of hosting, as a particular game grows …

Fundamental And Applied Experimental Investigations Of Corrosion Of Steel By Lbe Under Controlled Conditions: Kinetics, Chemistry Morphology, And Surface Preparation, John Farley, Allen L. Johnson, Dale L. Perry

Transmutation Sciences Materials (TRP)

Advanced nuclear processes such as the transmutation of nuclear waste, fast reactors, liquid-metal-cooled reactors, and spallation neutron sources require advanced materials systems to contain them. The required structural materials must be stable in the presence of nonmoderating coolants. A prime candidate for such a coolant is Lead Bismuth Eutectic (LBE). Materials in these systems must be able to tolerate high neutron fluxes, high temperatures, and chemical corrosion. Unfortunately, LBE corrodes stainless steel.

The corrosive behaviors of structural materials in LBE are not well understood. The Russians have over 80 reactor-years experience with LBE coolant in their Alpha-class submarine reactors. The …

Theoretical Modeling Of Protective Oxide Layer Growth In Non-Isothermal Lead Alloy Coolant Systems, Yitung Chen, Jinsuo Zhang, Huajun Chen, Jichun Li

Transmutation Sciences Materials (TRP)

The goal of this research project is to provide a basic understanding of the protective oxide layer behaviors and to develop oxide layer growth models of steels in non-isothermal lead alloys (lead or lead-bismuth eutectic) coolant systems. Precise studies and simulations of all hydrodynamics with thermal conditions encountered in practical coolant loop systems by use of different flowing conditions in the laboratory are difficult and expensive, if not impossible. Therefore it is important and necessary to develop theoretical models to predict the protective oxide layer behaviors at the design stage of a practical lead-alloy coolant system, to properly interpret and …

Investigating The Male-Driven Evolution Hypothesis Using Human AluRepeat Elements, Sridhar Ramachandran

Browse all Theses and Dissertations

Thousands of copies of short interspersed repeats (SINEs) are scattered essentially ran-domly through the human genome. Although copies of each repeat subfamily are identical at the time of their insertion, they become subject to individual substitutions after insertion. As the relative time of insertion is known for many of these repeats, such "junk DNA" can be used to provide a sizeable number of time-series data points for studying substitution effects in a variety of genomic contexts. This dissertation specifically discusses the usefulness of the Alufamily of SINE repeats towards addressing open problems in genomics, population genetics, and biology in …

Experimental Techniques For Nonlinear Material Characterization: A Nonlinear Spectrometer Using A White-Light Continuum Z-Scan, Mihaela Balu

Electronic Theses and Dissertations

The main goal of this dissertation is to introduce and demonstrate a new method for the rapid determination of the nonlinear absorption spectra and the dispersion of the nonlinear refraction of optical materials in the visible and near IR spectral regions. However, conventional methods like, white-light continuum pump-probe and Z-scan techniques were used to measure the peak 2PA cross-sections for a number of commercially available photoinitiators. In the new method mentioned above, a high energy, broadband femtosecond white-light continuum is used to replace the single wavelength source conventionally used in a Z-scan experiment. In a Z-scan experiment, the transmittance of …

Analysis Of Aircraft Arrival Delay And Airport On-Time Performance, Yuqiong Bai

Electronic Theses and Dissertations

While existing grid environments cater to specific needs of a particular user community, we need to go beyond them and consider general-purpose large-scale distributed systems consisting of large collections of heterogeneous computers and communication systems shared by a large user population with very diverse requirements. Coordination, matchmaking, and resource allocation are among the essential functions of large-scale distributed systems. Although deterministic approaches for coordination, matchmaking, and resource allocation have been well studied, they are not suitable for large-scale distributed systems due to the large-scale, the autonomy, and the dynamics of the systems. We have to seek for nondeterministic solutions for …

Advances And Applications Of Dezert-Smarandache Theory (Dsmt) For Information Fusion (Collected Works), Vol. 2, Florentin Smarandache, Jean Dezert

Branch Mathematics and Statistics Faculty and Staff Publications

This second volume dedicated to Dezert-Smarandache Theory (DSmT) in Information Fusion brings in new fusion quantitative rules (such as the PCR1-6, where PCR5 for two sources does the most mathematically exact redistribution of conflicting masses to the non-empty sets in the fusion literature), qualitative fusion rules, and the Belief Conditioning Rule (BCR) which is different from the classical conditioning rule used by the fusion community working with the Mathematical Theory of Evidence.

Other fusion rules are constructed based on T-norm and T-conorm (hence using fuzzy logic and fuzzy set in information fusion), or more general fusion rules based on N-norm …

Radiation Studies Of The Tin-Doped Microscopic Droplet Laser Plasma Light Source Specific To Euv Lithography, Chiew-Seng Koay

Electronic Theses and Dissertations

Extreme ultraviolet lithography(EUVL) is being developed worldwide as the next generation technology to be inserted in ~ 2009 for the mass production of IC chips with feature sizes <35 nm. One major challenge to its implementation is the development of a 13.5 nm EUV source of radiation that meets the requirements of current roadmap designs of the source of illumination in commercial EUVL scanners. The light source must be debris-free, in a free-space environment with the imaging EUV optics that must provide sufficient, narrow spectral band EUV power to print 100 wafers/hr. To meet this need, extensive studies on emission from a laser plasma source utilizing tin-doped droplet target was conducted. Presented in this work, are the many optical techniques such as spectroscopy, radiometry, and imaging, that were employed to characterize and optimize emission from the laser plasma source State of the art EUV spectrographs were employed to observe the source's spectrum under various laser irradiation conditions. Comparing the experimental spectra to those from theory, has allowed the determination of the Sn ion stages responsible for emitting into the useful EUV bandwidth. Experimental results were compared to spectral simulations obtained using Collisional-Radiative Equilibrium (CRE) model, as well. Moreover, extensive measurements surveying source emission from 2 nm to 30 nm, which is the region of the electromagnetic spectrum defined as EUV, was accomplished. Absolutely calibrated metrology was employed with the Flying Circus instrument from which the source's conversion efficiency (CE)--from laser to the useful EUV energy--was characterized under various laser irradiation conditions. Hydrodynamic simulations of the plasma expansion together with the CRE model predicted the condition at which optimum conversion could be attained. The condition was demonstrated experimentally, with the highest CE to be slightly above 2%, which is the highest value among all EUV source contenders. In addition to laser intensity, the CE was found to depend on the laser wavelength. For better understanding, this observation is compared to results from simulations. Through a novel approach in imaging, the size of the plasma was characterized by recording images of the plasma within a narrow band, around 13.5 nm. The size, approximately 100 ìm, is safely within the etendue limit set by the optical elements in the EUV scanner. Finally, the notion of irradiating the target with multiple laser beams was explored for the possibility of improving the source's conversion efficiency.

Fast Response Liquid Crystal Devices, Yung-Hsun Wu

Electronic Theses and Dissertations

Liquid crystal (LC) has been widely used for displays, spatial light modulators, variable optical attenuators (VOAs) and other tunable photonic devices. The response time of these devices is mainly determined by the employed liquid crystal material. How to obtain fast response for the LC devices is a fundamentally important and technically challenging task. In this dissertation, we investigate several methods to improve liquid crystal response time, for examples, using dual-frequency liquid crystals, polymer stabilized liquid crystals, and sheared polymer network liquid crystals. We discover a new class of material, denoted as sheared polymer network liquid crystal (SPNLC) which exhibits a …

Integrated Wavelength Stabilization Of Broad Area Semiconductor Lasers Using A Dual Grating Reflector, Jason O'Daniel

Electronic Theses and Dissertations

A new fully integrated wavelength stabilization scheme based on grating-coupled surface-emitting lasers is explored. This wavelength stabilization scheme relies on two gratings. The first grating is fabricated on the p-side of the semiconductor laser in close proximity to the laser waveguide such that it couples light out of the guided mode of the waveguide into a propagating mode in the substrate; this grating is known as the grating coupler. The second grating is fabricated on the n-side of the substrate such that for the stabilization wavelength, this second grating operates in the Littrow condition and is known as the feedback …

Polarization-Independent Liquid Crystal Devices, Yi-Hsin Lin

Electronic Theses and Dissertations

Liquid crystal (LC) devices can be operated as amplitude modulators and phase modulators. LC amplitude modulation is commonly used in liquid crystal display (LCD) while phase-only modulation is useful for laser beam steering, tunable grating, prism, lens, and other photonic devices. Most LC devices are polarization dependent and require at least one polarizer. As a result, the optical efficiency is low. To enhance display brightness, a power hungry backlight has to be used leading to a high power consumption and short battery life. In a LC phase modulator, the polarization dependent property complicates the laser beam steering system. It is …

Propagation Effect In Inhomogeneous Media, Including Media With Light-Induced And Fixed Gratings, Chang-Ching Tsai

Electronic Theses and Dissertations

Optical waves propagation in various types of volume gratings, materials with constant impendence and optical fibers are studied. Instability of cross–phase modulation and of Energy transfer via GRON-type (Grating-type Orientational Nonlinearity in Liquid Crystal) Stimulated Scattering is numerically observed. Two diffractive optical elements made of volume gratings are suggested and analyzed. A transmission hologram based on the analogy with Stimulated Raman Adiabatic Passage (STIRAP) in nonlinear optics is proposed. This transmission hologram demonstrates high diffraction efficiency and low sensitivity to polarization and hologram strength. The other is a reflection hologram with two crossed-gratings. It features good angular selectivity in comparison …

All-Semiconductor High Power Mode-Locked Laser System, Kyungbum Kim

Electronic Theses and Dissertations

All-optical synchronization and its application in advanced optical communications have been investigated in this dissertation. Dynamics of all-optical timing synchronization (clock recovery) using multi-section gain-coupled distributed-feedback (MS-GC DFB) lasers are discussed. A record speed of 180-GHz timing synchronization has been demonstrated using this device. An all-optical carrier synchronization (phase and polarization recovery) scheme from PSK (phase shift keying) data is proposed and demonstrated for the first time. As an application of all-optical synchronization, the characterization of advanced modulation formats using a linear optical sampling technique was studied. The full characterization of 10-Gb/s RZ-BPSK (return-to-zero binary PSK) data has been demonstrated. …

On The Use Of Variable Coherence In Inverse Scattering Problems, Erwan Baleine

Electronic Theses and Dissertations

Even though most of the properties of optical fields, such as wavelength, polarization, wavefront curvature or angular spectrum, have been commonly manipulated in a variety of remote sensing procedures, controlling the degree of coherence of light did not find wide applications until recently. Since the emergence of optical coherence tomography, a growing number of scattering techniques have relied on temporal coherence gating which provides efficient target selectivity in a way achieved only by bulky short pulse measurements. The spatial counterpart of temporal coherence, however, has barely been exploited in sensing applications. This dissertation examines, in different scattering regimes, a variety …

Applications Of Linear And Nonlinear Optical Effects In Liquid Crystals, Hakob Sarkissian

Electronic Theses and Dissertations

Liquid crystals have been a major subject of research for the past decades. Aside from the variety of structures they can form, they exhibit a vast range of optical phenomena. Many of these phenomena found applications in technology and became an essential part of it. In this dissertation thesis we continue the line to propose a number of new applications of optical effects in liquid crystals and develop their theoretical framework. One such application is the possibility of beam combining using Orientational Stimulated Scattering in a nematic liquid crystal cell. Our numerical study of the OSS process shows that normally …

Image-Based Material Editing, Erum Khan

Electronic Theses and Dissertations

Photo editing software allows digital images to be blurred, warped or re-colored at the touch of a button. However, it is not currently possible to change the material appearance of an object except by painstakingly painting over the appropriate pixels. Here we present a set of methods for automatically replacing one material with another, completely different material, starting with only a single high dynamic range image, and an alpha matte specifying the object. Our approach exploits the fact that human vision is surprisingly tolerant of certain (sometimes enormous) physical inaccuracies. Thus, it may be possible to produce a visually compelling …