Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Physical Sciences and Mathematics

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 301 - 330 of 40850

Full-Text Articles in Engineering

Anomaly Management In Unmanned Aerial Vehicles: A Systematic Literature Review, Ivan Tan Wei Han, Christopher M. Poskitt, Lingxiao Jiang, Lwin Khin Shar Jul 2026

Anomaly Management In Unmanned Aerial Vehicles: A Systematic Literature Review, Ivan Tan Wei Han, Christopher M. Poskitt, Lingxiao Jiang, Lwin Khin Shar

Research Collection School Of Computing and Information Systems

Unmanned Aerial Vehicles (UAVs) are increasingly deployed in safety-critical applications such as logistics, surveillance, disaster response, and urban air mobility. While their autonomy enables powerful capabilities, it also introduces vulnerabilities due to hardware faults, software defects, communication failures, and adversarial interference. This survey presents a comprehensive review of research studies closely related to UAV anomalies published between 2015 and 2025, covering 111 papers from academic and industrial sources. We introduce a unified five-pillar taxonomy—anomaly generation, prevention, detection, recovery, and analysis—that organizes existing work across the full anomaly management lifecycle. In contrast to prior surveys that focus primarily on detection algorithms, …

Go to article

Hsv-1 Us3 Hijacks Conserved Actin Regulatory Complexes To Drive F-Actin Remodeling, Md Imran Hossain, Md Arifuzzaman, Md Mehedi Hasan, Seung Jong Park, Leila Rahimian, Ojasvi Dutta, Vladimir Chouljenko, Harikrishnan Mohan, Reza Ghavimi, Konstantin G. Kousoulas Jul 2026

Hsv-1 Us3 Hijacks Conserved Actin Regulatory Complexes To Drive F-Actin Remodeling, Md Imran Hossain, Md Arifuzzaman, Md Mehedi Hasan, Seung Jong Park, Leila Rahimian, Ojasvi Dutta, Vladimir Chouljenko, Harikrishnan Mohan, Reza Ghavimi, Konstantin G. Kousoulas

Computer Science Faculty Research & Creative Works

The herpes simplex virus 1 (HSV-1) US3 is a multifunctional serine/threonine kinase that promotes HSV-1 replication and spread. But its role and the mechanisms by which US3 regulates actin cytoskeletal remodeling remain poorly defined. We combined flow cytometry, confocal microscopy, immunoprecipitation-mass spectrometry (IP-MS), protein complex mapping, and machine learning to characterize US3-mediated F-actin dynamics. Flow cytometry and confocal microscopy showed that wild-type HSV-1 induces significant F-actin remodeling, while the ΔUS3 mutant displays F-actin levels comparable to uninfected cells, identifying US3 as a key regulator. IP-MS identified 47 high-confidence US3 interactors enriched in conserved actin regulatory complexes, including Arp2/3 nucleation machinery, …

Go to article

Optimize Optical Properties Of Cdte Solar Cell For Pv Applications, Mabrouk Hassan Arhoma Jun 2026

Optimize Optical Properties Of Cdte Solar Cell For Pv Applications, Mabrouk Hassan Arhoma

BAU Journal - Science and Technology

In order to to develop thin film heterojunction solar cells, CdTe is one of the most promising absorber materials cells. Electrodeposition CdTe materials solar cell are being focused by Several key researchers. This is due to its direct energy band gap and its high absorption coefficient and the best efficiency obtained for a small-area. In this work CdTe films were electrochemically deposited from aqueous solutions. Different preparative parameters such as growth voltage and heat treatment conditions were optimized. The CdTe layers were deposited at 655, 665, 675, 685 and 695 mV vs SCE. Material characterization were carried out using optical …

Go to article

The Role Of Zinc Precursor Concentration In Modulating The Structural, Optical, And Electrical Properties Of Sol-Gel Derived Czts Thin Films, Justine John Tibaijuka Jun 2026

The Role Of Zinc Precursor Concentration In Modulating The Structural, Optical, And Electrical Properties Of Sol-Gel Derived Czts Thin Films, Justine John Tibaijuka

Tanzania Journal of Science

This study reports on CZTS thin films fabricated by sol–gel spin coating using zinc acetate dihydrate, copper acetate dihydrate, tin chloride, and thiourea dissolved in methanol with monoethylamine as a stabilizer. The films were annealed rapidly at 540 °C by using an RTP furnace. Results show the significant influence of zinc concentration on films’ properties with band gap evolution between 1.46 and 1.7 eV, along with high absorption coefficients exceeding 10⁴ cm⁻¹ in the visible range. Structurally, the films evolved from poorly crystalline at low Zn content to well- crystallized, (112)-oriented kesterite near stoichiometry. However, excessive Zn caused slight degradation …

Go to article

Numerical Method For Strongly Variable-Density Flows At Low Mach Number: Flame-Sheet Regularisation And A Mass-Flux Immersed Boundary Method, Matheus P. Severino, Fernando F. Fachini, Elmer M. Gennaro, Daniel Rodríguez, Leandro F. Souza Jun 2026

Numerical Method For Strongly Variable-Density Flows At Low Mach Number: Flame-Sheet Regularisation And A Mass-Flux Immersed Boundary Method, Matheus P. Severino, Fernando F. Fachini, Elmer M. Gennaro, Daniel Rodríguez, Leandro F. Souza

Mathematical Modelling and Numerical Simulation with Applications

A low-Mach-number flow, in the laminar regime, has intrinsically two characteristic spatial scales for a given time scale, or two characteristic temporal scales for a given spatial scale, and these dual scales are very different due to the disparity between the flow and acoustic speed. Therefore, low-Mach-number flows impose mathematical and computational challenges in their description. Standard numerical methods for compressible flows, which are typically designed for problems with a single dominant spatial and temporal scale, require alternative approaches, such as preconditioning techniques or solvers tailored for low-Mach-number equations. The present work introduces a simplified fluid dynamics model for flows …

Go to article

An Interactive Multi-Objective Programming Approach For Optimizing Fully Trapezoidal Spherical Fuzzy Linear Programming Problem With Application, Sultan S. Alodhaibi, Hissah Ibrahim Almuzini, Hamiden Abd El-Wahed Khalifa Jun 2026

An Interactive Multi-Objective Programming Approach For Optimizing Fully Trapezoidal Spherical Fuzzy Linear Programming Problem With Application, Sultan S. Alodhaibi, Hissah Ibrahim Almuzini, Hamiden Abd El-Wahed Khalifa

Neutrosophic Systems with Applications

In this paper, a linear programming framework with completely uncertain parameters is investigated by employing trapezoidal spherical fuzzy numbers (TrSFNs). The proposed formulation incorporates a spherical fuzzy (SF) decision environment in which the optimization process simultaneously maximizes the degree of positive membership while minimizing the corresponding neutral and negative membership degrees. By utilizing the concept of the α -cut associated with TrSFNs, the original fully fuzzy linear programming problem is transformed into an interval-valued linear programming model with confidence levels. To rank and compare the resulting interval objective values, an interval ordering approach based on the decision maker's preferences—considering the …

Go to article

Interval-Valued Neutrosophic Dombi Bonferroni Mean Aggregation Operators In Medical Diagnosis And Sustainable Energy, Maryam Faisal, Muhammad Nadeem, Muhammad Kamran Jun 2026

Interval-Valued Neutrosophic Dombi Bonferroni Mean Aggregation Operators In Medical Diagnosis And Sustainable Energy, Maryam Faisal, Muhammad Nadeem, Muhammad Kamran

Neutrosophic Systems with Applications

Medical diagnosis is one of the most difficult fields in which decisions must be made due to the fact that medical information often has characteristics of uncertainty, incompleteness, imprecision and even contradiction. Traditional aggregation and decision-making methods are often not well suited to such complexities, and may result in less reliable diagnostic outcomes. In order to overcome these drawbacks, the authors propose a new approach using a novel representation of Interval-Valued Neutrosophic Sets (IVNSs), the Dombi operational laws, and Bonferroni Mean (BM) aggregation operators. The proposed framework is specifically aimed at coping with uncertainty, indeterminacy and falsity all at once …

Go to article

Exploiting Uncertainty Of Computational Methodology In Optimizing User Interface In Human-Computer Interaction, Nada Mohamed, Alshaimaa A. Tantawy Jun 2026

Exploiting Uncertainty Of Computational Methodology In Optimizing User Interface In Human-Computer Interaction, Nada Mohamed, Alshaimaa A. Tantawy

Neutrosophic Systems with Applications

Human-computer interaction (HCI) evaluation and optimization of user interfaces (UIs) constitute a complex multi-criteria decision-making challenge, marked by conflicting evaluation dimensions, subjective expert judgments, and inherent uncertainty in user experience assessment. Traditional evaluation approaches, such as heuristic expert reviews and user satisfaction surveys, rely on sharp, binary classifications that fail to capture the gradual and overlapping nature of human cognitive and affective states. This limitation necessitates a more robust uncertainty-aware methodology that can model the true complexity of HCI evaluation. This paper proposes a hybrid mathematical model that integrates various Multi-Criteria Decision Making (MCDM) techniques of Entropy, and Simple Additive …

Go to article

Generative Endurance Logic: An Axiomatic Framework For Reasoning About Outcome-Generating Objects Under Constraints, Hafiz Burhan Ul Haq, Muhammad Nauman Irshad Jun 2026

Generative Endurance Logic: An Axiomatic Framework For Reasoning About Outcome-Generating Objects Under Constraints, Hafiz Burhan Ul Haq, Muhammad Nauman Irshad

Neutrosophic Systems with Applications

This paper introduces Generative Endurance Logic (GEL), a formal framework for studying objects through the outcomes they can produce. In many cases, an object cannot be judged only by a fixed truth value, score, or utility value. A rule, model, action, or strategy may behave well in one situation but fail when the context changes or when small perturbations occur. GEL addresses this issue by treating each object as a generator of outcomes. Each object a is linked to a generation map Ga:X×Ω→Y, where X is the context space, Ω is the …

Go to article

Recursive Neutrosophic Superhypergraphs With Illustrative Applications, Takaaki Fujita, Ajoy Kanti Das, Suman Das, Sankar Prasad Mondal, Volkan Duran Jun 2026

Recursive Neutrosophic Superhypergraphs With Illustrative Applications, Takaaki Fujita, Ajoy Kanti Das, Suman Das, Sankar Prasad Mondal, Volkan Duran

Neutrosophic Systems with Applications

Finite hypergraphs generalize ordinary graphs by permitting each hyperedge to join any nonempty set of vertices, and thus provide a natural model for truly multiway interactions. To represent hierarchical and multi-layer structure, SuperHyperGraphs iterate the powerset operation so that set-valued entities created at one level can be treated as vertices at higher levels. Independently, recursive hypergraphs allow edge recursion: an edge may contain not only vertices but also lower-level edges, yielding nested (and possibly self-referential) incidence controlled by a specified recursion depth. In this work we introduce and axiomatize Recursive Neutrosophic SuperHyperGraphs, a unified framework that combines vertex …

Go to article

Li+/Na+ Hybrid Ion Conduction Mechanism In The Superionic Conductor Li3–XNaXZr2Si2Po12, Yi-Hong Wu, Xia Xie, Lei Zhu, Mu-Ran Yu, Guo-Tai Zhang, Jun-Chao Chen, Shu-Ying Sun, You-Wei Wang, Wei-Ping Tang Jun 2026

Li+/Na+ Hybrid Ion Conduction Mechanism In The Superionic Conductor Li3–XNaXZr2Si2Po12, Yi-Hong Wu, Xia Xie, Lei Zhu, Mu-Ran Yu, Guo-Tai Zhang, Jun-Chao Chen, Shu-Ying Sun, You-Wei Wang, Wei-Ping Tang

Journal of Electrochemistry

Hybrid ion conductors that transport multiple ionic conductive species provide a useful platform for understanding how mixed-ion transport governs ionic conductivity within a single phase. However, the controlled introduction of multiple mobile ions into solid-state electrolytes and a mechanistic understanding of their migration within the framework remain challenging. Herein, a skeleton-retained Li+↔Na+ cationic exchange was used to simultaneously induce Li+ and Na+ cations into the NASICON-type framework of Li3–xNaxZr2Si2PO12 (0 < x < 3). We show that the interpenetration of NaO6 and NaO8 coordination polyhedra significantly influences the ionic conductivity of hybrid ion conductors. Computational …

Go to article

Distribution And Transport Of Lithium Ions At Interfaces Between Graphite And Carboxymethyl Celluloses, Zi-Jun Huang, Zhen-Ying Zheng, Hua-Wei Cao, Jian Wang, Qing-Feng Zhang, Sheng-Li Chen Jun 2026

Distribution And Transport Of Lithium Ions At Interfaces Between Graphite And Carboxymethyl Celluloses, Zi-Jun Huang, Zhen-Ying Zheng, Hua-Wei Cao, Jian Wang, Qing-Feng Zhang, Sheng-Li Chen

Journal of Electrochemistry

Carboxymethyl cellulose (CMC) is a water-processable binder widely used for graphite anodes. However, a microscopic understanding of why the identity of CMC counterions (Li+/Na+/K+) strongly affects electrode performance remains limited. Here, molecular dynamics (MD) simulations are used to track Li+ transport accessibility across electrolyte/CMC/graphite three-phase interfaces, comparing pure CMC-Li, CMC-Na, CMC-K, and mixed-counterion CMC binders. We find that CMC-Li sustains a continuous Li+ transport pathway from the electrolyte through the binder phase toward graphite. In contrast, in CMC-Na and CMC-K, Na+/K+ ions preferentially enrich at the graphite/binder interface, forming …

Go to article

Distinct Co2 Electroreduction Behaviors Over Planar And Non-Planar Cobalt Molecular Catalysts, Ru Jia, Cheng-Biao Zhu, Zi-Mo Zhang, Tuo Wang, Kai-Cong Yang, Guang-Zhe Wang, Yang Hu, Ting-Ting Zhang, Zhen-Wei Wei, Li Xiao, Gong-Wei Wang, Lin Zhuang Jun 2026

Distinct Co2 Electroreduction Behaviors Over Planar And Non-Planar Cobalt Molecular Catalysts, Ru Jia, Cheng-Biao Zhu, Zi-Mo Zhang, Tuo Wang, Kai-Cong Yang, Guang-Zhe Wang, Yang Hu, Ting-Ting Zhang, Zhen-Wei Wei, Li Xiao, Gong-Wei Wang, Lin Zhuang

Journal of Electrochemistry

Molecular catalysts serve as ideal platforms for studying electrocatalytic reaction mechanisms. While current research mainly focuses on modulating central metals or surrounding ligands, the influence of molecular spatial configuration remains largely unexplored. Herein, we synthesized two cobalt complexes with similar ligand environments but distinct spatial geometries, a planar cobalt hexaazamacrocyclic complex (CoHAM) and a non-planar acyclic Co(phen)2Cl2, and evaluated their performance in CO2 reduction reaction (CO2RR). The planar CoHAM exhibited dramatically superior CO2RR performance compared to the non-planar Co(phen)2Cl2. Through a series of combined analyses using in-situ …

Go to article

On The Use Of Lorawan For Smart Fishing Applications In The Blue Economy Sector, Eva Shayo Jun 2026

On The Use Of Lorawan For Smart Fishing Applications In The Blue Economy Sector, Eva Shayo

Tanzania Journal of Engineering and Technology (TJET)

The growth of digital technology is expected to transform small-scale fishery sectors, where a need for robust, low-cost, long-range communication networks becomes critical. There exist several technologies that are used in the fishery sector but they are never affordable to small scale fisheries. This study evaluates the feasibility of using low cost Long Range Wide Area Network (LoRaWAN) technology specifically tailored for smart fishing environments to small scale fishery sector. Using simulation, we assess the performance of the key performance metrics including probability of success and energy efficiency under varying device densities and time. During evaluation, we considered end devices …

Go to article

Physicochemical Properties And Chemical Compositions Of Cashew Nut Shell Liquid Extracted With Carbon Dioxide–Expanded Hexane, Neema Msuya, Joseph Yn Philip, Frank Jacob, Kando K. Janga Jun 2026

Physicochemical Properties And Chemical Compositions Of Cashew Nut Shell Liquid Extracted With Carbon Dioxide–Expanded Hexane, Neema Msuya, Joseph Yn Philip, Frank Jacob, Kando K. Janga

Tanzania Journal of Engineering and Technology (TJET)

Cashew nut shell liquid (CNSL) is a mixture of phenolic compounds that can effectively replace commercially available phenols in various applications. This study investigated the physicochemical properties and chemical composition of CNSL extracted using CO2–expanded hexane (CXH) and compared to the traditional Soxhlet extraction method. Steamed cashew nut shells (sCNS) were used in both cases.  The CXH was carried under varying CO2-mole fractions (0.468-0.892) and temperatures (20-36 °C) whereas Soxhlet extraction was performed at atmospheric pressure and hexane boiling point. Response Surface Methodology (RSM) with Central Composite Face-Centred Design (CCFD) was employed to evaluate the effect …

Go to article

The Impact Of Gender Sensitization On Requirements Elicitation: A Controlled Experiment, Ruthbertha Kateule, Salome Maro, Leonard Peter Binamungu Jun 2026

The Impact Of Gender Sensitization On Requirements Elicitation: A Controlled Experiment, Ruthbertha Kateule, Salome Maro, Leonard Peter Binamungu

Tanzania Journal of Engineering and Technology (TJET)

Previous studies in software engineering have reported the importance of considering gender aspects in various software engineering activities, including requirements engineering, however, to the best of our knowledge, no work has investigated the impact of gender sensitisation on eliciting gender inclusive software requirements. The objective of this study was to understand the impact of gender sensitisation on software requirements elicitation. We conducted a controlled experiment using 40 undergraduate students from three different computing programs at the University of Dar es Salaam. The 40 participants were divided into 9 groups with both males and females. The participants were asked to elicit …

Go to article

Enhancing Community Engagement Through ‘Nitunze Kilombero’ Mobile App: Case Of Climate Land Use And Cover Management For Kilombero Basin, Ghanima Chanzi, Subira Munishi Jun 2026

Enhancing Community Engagement Through ‘Nitunze Kilombero’ Mobile App: Case Of Climate Land Use And Cover Management For Kilombero Basin, Ghanima Chanzi, Subira Munishi

Tanzania Journal of Engineering and Technology (TJET)

The Kilombero Basin in southeastern Tanzania faces significant challenges due to rapid land use and land cover (LULC) changes driven by climate change, population growth, and unsustainable farming practices. This study assessed the role of community engagement and digital reporting through the 'NITUNZE KILOMBERO', mobile application in supporting water resources management in the basin. The App facilitates real-time reporting of environmental issues, provides educational resources, and enables collaboration between local communities and authorities. A mixed-methods approach, including household surveys and key informant interviews, was employed to assess the app's effectiveness. Results indicate high community awareness of LULC impacts, with 85% …

Go to article

Study On Deformation Characteristics Of Kaolin Under Dry-Wet And Freeze-Thaw Cycles, Yang Shang, Xiao Dingyuan Jun 2026

Study On Deformation Characteristics Of Kaolin Under Dry-Wet And Freeze-Thaw Cycles, Yang Shang, Xiao Dingyuan

Journal of China & Foreign Highway

In seasonally frozen areas, surface soil is subjected to prolonged and drastic fluctuations in temperature and humidity, causing excessive deformation and resulting in engineering issues such as subgrade settlement and building deformation. The deformation characteristics of kaolin in seasonally frozen areas under the combined influence of freeze-thaw and dry-wet cycles were studied. Through a self-designed experimental setup, experiments with interleaved dry-wet and freeze-thaw cycles were conducted on compacted specimens, and wetting-freezing-thawing-drying cycle experiments were performed to explore the swelling-shrinkage deformation characteristics of kaolin under the combined action of different freeze-thaw and dry-wet cycles. The results indicate that intermittent freeze-thaw cycles …

Go to article

Influence Of Geocell Technical Parameters On Bearing Characteristics Of Highway Subgrades In Oasis Areas, Zhu Chunsheng, Shu Xingyu, Lu Huiyu, Yang Xiaohua Jun 2026

Influence Of Geocell Technical Parameters On Bearing Characteristics Of Highway Subgrades In Oasis Areas, Zhu Chunsheng, Shu Xingyu, Lu Huiyu, Yang Xiaohua

Journal of China & Foreign Highway

To study the effects of technical parameters, such as geocell specifications and laying types, on the bearing capacity and deformation of highway subgrades in oasis flood irrigation areas, the shear properties of plain soil and geocell-reinforced layers with different specifications were studied through large-scale direct shear tests. Based on indoor compression tests and field load tests, numerical simulation parameters, such as the deformation modulus of different foundation soil layers, were calibrated. A numerical model of the geocell-reinforced highway subgrade was established using, and the effects of geocell specifications and laying types on the vertical settlement of the subgrade, the displacement …

Go to article

Study On Effects Of Phase Change Materials On Thermal Erosion Resistance Of Airport Pavement, Li Ping, Li Yunlong, Zheng Zhipeng, Wang Zhijian, Yi Chengxi Jun 2026

Study On Effects Of Phase Change Materials On Thermal Erosion Resistance Of Airport Pavement, Li Ping, Li Yunlong, Zheng Zhipeng, Wang Zhijian, Yi Chengxi

Journal of China & Foreign Highway

To investigate the effect of phase change materials (PCMs ) on improving the thermal erosion resistance of airport pavements and to provide recommendations for selecting optimal PCMs to obtain airport pavements with longer service lives, three PCMs, PCM-G- 98 (A), LB- 2 (B), and TH-HC- 120 (C), were purchased based on literature summaries and market research. Based on microscopic test results and the actual preparation conditions of modified asphalt, PCMs A and B were selected. Subsequently, based on a self-made high-content SBS modified asphalt (S), four groups of composite modified asphalts (S-A- 5, S-A- 10, S-B- 5, and S-B- 10) …

Go to article

Study On Influence Of Elastic Modulus Of Fiber On Compaction Characteristics Of Asphalt Mixtures, Zou Zexi, Luo Kaiyan, Lin Zhiming, Qiu Xiang, Lu Xudong, Yao Xiaoyang, Wang Yaolong Jun 2026

Study On Influence Of Elastic Modulus Of Fiber On Compaction Characteristics Of Asphalt Mixtures, Zou Zexi, Luo Kaiyan, Lin Zhiming, Qiu Xiang, Lu Xudong, Yao Xiaoyang, Wang Yaolong

Journal of China & Foreign Highway

To investigate the influence mechanism of fiber incorporation on the compaction characteristics of asphalt mixtures, six types of typical road fibers (polyester fiber, polyacrylonitrile fiber, aramid fiber, basalt fiber, polypropylene fiber, and polyvinyl alcohol fiber) were selected in this paper, and gyratory compaction tests were conducted based on AC- 20 graded mixtures. The compaction coefficient (a larger compaction coefficient indicates easier compaction) was used as the core evaluation index. The results indicate that the elastic modulus of the fiber is the key influencing factor. When the fiber modulus is 50% lower than the aggregate modulus (such as polyester fiber and …

Go to article

Angularity Evaluation Of Coarse Aggregates Based On Local Feature Extraction Of Point Clouds, Ma Quanzhuo, Feng Ponan, Feng Zezhong, Lei Mingyu, Wang Zhenfeng, Li Jiange Jun 2026

Angularity Evaluation Of Coarse Aggregates Based On Local Feature Extraction Of Point Clouds, Ma Quanzhuo, Feng Ponan, Feng Zezhong, Lei Mingyu, Wang Zhenfeng, Li Jiange

Journal of China & Foreign Highway

The morphological characteristics of coarse aggregates significantly affect the mechanical properties of asphalt mixtures and thus directly influence their road performance and durability. This paper aims to innovatively propose an evaluation method for the angularity of coarse aggregates. A three-dimensional (3D) scanner was used to acquire the surface profile information of coarse aggregates, and local angularity features were extracted through point cloud data analysis. Subsequently, a comprehensive 3D angularity evaluation index for coarse aggregates (A3D) was proposed by combining local normal vectors and curvature characteristics. The results indicate that A3D can be more accurately and independently used for angularity evaluation. …

Go to article

Optimization Design And Experimental Study On Strength Of Ternary Industrial Solid Waste Mixtures, Yang Shu, Ai Yi, Sheng Shanwang, Li Chuangmin Jun 2026

Optimization Design And Experimental Study On Strength Of Ternary Industrial Solid Waste Mixtures, Yang Shu, Ai Yi, Sheng Shanwang, Li Chuangmin

Journal of China & Foreign Highway

This paper aims to explore whether fly ash, lithium slag, and slag powder (ternary industrial solid wastes) can effectively replace cement as cementitious materials for interlocking large-particle crushed stone bases. A uniform design table U9(94) was used to design the test scheme for the mixing ratios of ternary industrial solid waste mixtures; the correlation between the mortar strength and the ternary industrial solid waste mixtures was analyzed by Pearson correlation; with the help of the mathematical statistical software SPSS 26.0, mathematical models for the flexural strength and compressive strength of the ternary industrial solid waste mixture mortar specimens were established. …

Go to article

Calculation Of Tensile Force For Cable-Stayed Buckling Bracket Combined With Temporary Tie Rod Structure Of V-Shaped Pier, Zhao Xiaolu, Yang Guang, Liu Junle, Qiu Zhiwei, Meng Lingxin, Peng Weibing Jun 2026

Calculation Of Tensile Force For Cable-Stayed Buckling Bracket Combined With Temporary Tie Rod Structure Of V-Shaped Pier, Zhao Xiaolu, Yang Guang, Liu Junle, Qiu Zhiwei, Meng Lingxin, Peng Weibing

Journal of China & Foreign Highway

To solve the problem of excessive tensile stress of the cross-section during the cantilever casting process of high piers with inclined legs, a determination method of tensile force based on the linear programming theory and unstressed state control was proposed. Based on the internal force equilibrium method and the principle of influence matrix, the method optimized the tensile force with “stress control as the primary and alignment control as the auxiliary”. The unstressed state control method was adopted for forward iteration, and the effect of tangential displacement between segments was considered to verify the alignment of the inclined legs. Finally, …

Go to article

Analysis Of Influence Of Cable Clamp Slippage On Internal Force And Alignment Of Main Cable, Zhu Kun, Liao Dinghui, Hu Chengze, Shen Heshun, Cao Hongyou Jun 2026

Analysis Of Influence Of Cable Clamp Slippage On Internal Force And Alignment Of Main Cable, Zhu Kun, Liao Dinghui, Hu Chengze, Shen Heshun, Cao Hongyou

Journal of China & Foreign Highway

To investigate the influence of cable clamp slippage on alignment and internal force of the main cable, a theoretical analysis method based on node coordinates of the main cable after cable clamp slippage was proposed in this paper. Based on segmented catenary theory, the influence of hanger inclination caused by hanger slippage on the horizontal force of the main cable was considered. The segmental cable element of the main cable was equivalently expressed as expressions of hanger tension and unstressed length. With total unstressed length kept constant as a control condition, the horizontal force of the main cable was iteratively …

Go to article

Study On Structural Design And Load Transfer Performance Of 6-Hole Flat Anchor Plate, Liao Yuanyuan, Ling Lihua, Wu Qibin, Cheng Bin, Dai Dongming Jun 2026

Study On Structural Design And Load Transfer Performance Of 6-Hole Flat Anchor Plate, Liao Yuanyuan, Ling Lihua, Wu Qibin, Cheng Bin, Dai Dongming

Journal of China & Foreign Highway

For negative bending moment prestressed tendons in simply supported-to-structurally-continuous bridges, the flat anchorage method of flange plate is more reasonable, but its widespread application is limited due to the anchoring capacity restrictions of flat anchor plates. To improve the anchoring capacity of a single anchorage zone, reduce the number of prestressed ducts, save concrete, and improve construction efficiency, a novel 6-hole flat anchor plate was developed, designed, and manufactured in this paper. By combining finite element analysis and experimental methods, a finite element analysis model of the concrete load transfer specimen beneath the novel 6-hole flat anchor plate was established, …

Go to article

Analysis Of Shear Bearing Mechanism And Influencing Factors Of Mcl-Shaped Composite Dowel Connector, Zeng Zhuo, Zhou Baicheng, Cheng Xianjie, Cao Zhengxing, Gao Rongxiong, Wang Zichao Jun 2026

Analysis Of Shear Bearing Mechanism And Influencing Factors Of Mcl-Shaped Composite Dowel Connector, Zeng Zhuo, Zhou Baicheng, Cheng Xianjie, Cao Zhengxing, Gao Rongxiong, Wang Zichao

Journal of China & Foreign Highway

To investigate the bearing mechanism of modified clothoid (MCL)-shaped composite dowel shear connectors and the influence laws of various factors on their shear bearing capacity, the stress states and failure modes of the steel dowel, concrete dowel, and transverse through-reinforcement that constitute the MCL-shaped shear connector were deeply analyzed in this paper based on an experimentally validated finite element model. Furthermore, the influence laws of transverse through-reinforcement, steel dowel thickness, and concrete strength on the shear bearing capacity of the MCL-shaped composite dowel were explored. The research results indicate that the bearing process of the MCL-shaped composite dowel exhibits elastic, …

Go to article

Research On Improving Bearing Capacity Of Full-Scale Prestressed Concrete Small Box Girders, Huang Jianyun, Gao Linli, Liu Zufeng, Ma Jinku, Ma Ming, Wang Xiaoguang Jun 2026

Research On Improving Bearing Capacity Of Full-Scale Prestressed Concrete Small Box Girders, Huang Jianyun, Gao Linli, Liu Zufeng, Ma Jinku, Ma Ming, Wang Xiaoguang

Journal of China & Foreign Highway

To solve the problems of lacking comparative research on the improvement effects of different reinforcement methods when formulating reinforcement schemes for prestressed concrete small box girders and that existing bearing capacity improvement tests mostly focus on scale models with insufficient reliability of results, full-scale model tests and numerical simulation analysis of five 30 m span prestressed concrete small box girders with different joint reinforcement measures were conducted in this paper. Finite element models for two single reinforcement measures were established, and the improvement effects of different reinforcement methods on the bearing capacity of prestressed concrete small box girders were studied. …

Go to article

Key Construction Technologies For Single-Tower Rotating-Cable Suspension Bridges With Steel Truss Girders In Mountainous Regions, Gao Shuangjian, Zhang Weichao, Fu Lihong, Zhu Shuo Jun 2026

Key Construction Technologies For Single-Tower Rotating-Cable Suspension Bridges With Steel Truss Girders In Mountainous Regions, Gao Shuangjian, Zhang Weichao, Fu Lihong, Zhu Shuo

Journal of China & Foreign Highway

Given the problems of narrow construction sites, difficult construction organization, and high safety and quality risks faced in the construction of bridges in steep canyon regions of mountainous areas, this paper carried out research on key technologies for bridge construction in mountainous areas based on the Yellow River Three Gorges Bridge of the Jiyuan‒Xin’an Expressway. For the excavation of deep and large anchorage foundation pits in mountainous areas, a technical scheme of “loosening controlled blasting combined mainly with mechanical excavation and supplemented by manual excavation” was adopted. As this project is a single-tower single-span ground-anchored rotating-cable suspension bridge, the technologies …

Go to article

Mix Proportion Design Of Tunnel Shotcrete Based On Diorite Manufactured Sand, Song Funing, Wang Zegang, Liu Naifei, Song Zhanping Jun 2026

Mix Proportion Design Of Tunnel Shotcrete Based On Diorite Manufactured Sand, Song Funing, Wang Zegang, Liu Naifei, Song Zhanping

Journal of China & Foreign Highway

Tunnel construction produces a large amount of waste slag, which cannot be effectively utilized due to various factors. By using tunnel slag to prepare manufactured sand to replace natural sand, resources can be saved; costs can be reduced, and the environment can be protected. Based on the Xi’an‒Shiyan high-speed railway project, the physical and mechanical properties of diorite along the tunnel were tested; the physical properties and concrete performance of manufactured sand and natural sand were comparatively studied, and the effects of water-binder ratio and sand ratio on the performance of shotcrete were analyzed by designing multiple sets of mix …

Go to article

First Prev Next Last