Engineering Commons^™

Quantification Of Ultraprecision Surface Morphology Using An Algebraic Graph Theoretic Approach, Prahalad Rao, Satish T. S. Bukkapatnam, Zhenyu (James) Kong, Omer F. Beyca, Kenneth Case, Ranga Komanduri

Department of Mechanical and Materials Engineering: Faculty Publications

Assessment of progressive, nano-scale variation of surface morphology during ultraprecision manufacturing processes, such as fine-abrasive polishing of semiconductor wafers, is a challenging proposition owing to limitations with traditional surface quantifiers. We present an algebraic graph theoretic approach that uses graph topological invariants for quantification of ultraprecision surface morphology. The graph theoretic approach captures heterogeneous multi-scaled aspects of surface morphology from optical micrographs, and is therefore valuable for in situ real-time assessment of surface quality. Extensive experimental investigations with specular finished (Sa ~ 5 nm) blanket copper wafers from a chemical mechanical planarization (CMP) process suggest that the proposed method was …

Evaluation Of Peritoneal Microbubble Oxygenation Therapy In A Rabbit Model Of Hypoxemia, Nathan D. Legband, Jameel A. Feshitan, Mark A. Borden, Benjamin S. Terry

Department of Mechanical and Materials Engineering: Faculty Publications

Alternative extrapulmonary oxygenation technologies are needed to treat patients suffering from severe hypoxemia refractory to mechanical ventilation. We previously demonstrated that peritoneal microbubble oxygenation (PMO), in which phospholipid-coated oxygen microbubbles (OMBs) are delivered into the peritoneal cavity, can successfully oxygenate rats suffering from a right pneumothorax. This study addressed the need to scale up the procedure to a larger animal with a splanchnic cardiac output similar to humans. Our results show that PMO therapy can double the survival time of rabbits experiencing complete tracheal occlusion from6.6 ± 0.6 min for the saline controls to 12.2 ± 3.0 min for the …

Enhanced Pool-Boiling Heat Transfer And Critical Heat Flux On Femtosecond Laser Processed Stainless Steel Surfaces, Cory M. Kruse, Troy Anderson, Chris Wilson, Craig Zuhlke, Dennis Alexander, George Gogos, Sidy Ndao

Department of Mechanical and Materials Engineering: Faculty Publications

In this paper, we present an experimental investigation of pool boiling heat transfer on multiscale (micro/nano) functionalized metallic surfaces. Heat transfer enhancement in metallic surfaces is very important for large scale high heat flux applications like in the nuclear power industry. The multiscale structures were fabricated via a femtosecond laser surface process (FLSP) technique, which forms self-organized mound-like microstructures covered by layers of nanoparticles. Using a pool boiling experimental setup with deionized water as the working fluid, both the heat transfer coefficients and critical heat flux were investigated. A polished reference sample was found to have a critical heat flux …

Torque Testing System: Flowserve Corporation, Taylor Catlin, David Reese, Bodin Rojanachaichanin, Kyle Stangland

Mechanical Engineering

Flowserve Corporation provides products and customer support to companies in the process industry for the design, testing, and manufacturing of mechanical seals. This includes, but is not limited to, companies concerned with power generation, fossil fuels, water resources, and chemical processing. In industries where fluid transportation is leveraged, mechanical seals have been utilized in pumps to increase performance. A mechanical seal is a design feature in pumps that seal the impeller housing and allow for little to no leakage. This technology is cutting edge and a considerable amount of research pertaining to the advantageous effects of specialized surface features is …

Stress-Limiting Test Structures For Rapid Low-Cost Strength And Stiffness Assessment, Andrew Katz, Craig P. Lusk, Nathan B. Crane

Faculty Publications

Purpose: Evaluate the use of a simple printed geometry to estimate mechanical properties (elastic modulus, yield strength) with inexpensive test equipment.

Design Methodology/Approach: Test geometry is presented that enables controlled strains with manual deformation and repeatable measurement of vibrational frequencies. This is tested with multiple FDM machines to assess measurement accuracy and repeatability. Printing orientation and some printing parameters are varied to assess the measurement sensitivity.

Findings: The test methods show good correlation with manufacturer material specifications in the X-Y plane and reported elastic strain limits. It is also sensitive to printing orientation and printing parameters.

Research Limitations/Implications: Further work …

Nanoindentation Of A Zinc Metal Soap Mixture For Use In A Laser Printer, George A. Nimick

Theses and Dissertations--Chemical and Materials Engineering

At the start of this project, the possible choices of metal soaps had already been narrowed to include some of the zinc soaps used in this project. These zinc soaps are mixtures of zinc stearate and zinc palmitate of varying ratios purchased from a supplier. Zinc soap was chosen as result of its common use in various industries as a lubricant and mold release, which implied potential benefits in an electrophotographic printing system. These potential benefits include, but are not limited to, a more efficient transfer from a photoconductive drum and protection of the drum from mechanical and chemical degradation. …

Influence Of Spatial Variations Of Railroad Track Stiffness And Material Inclusions On Fatigue Life, Celestin Nkundineza

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Railroad transportation is very important for economic growth and effective maintenance is one critical factor for its economic sustainability. The high repetitive forces from a moving railcar induce cyclic stresses that lead to rail bending and potential deterioration due to fatigue crack initiation and propagation. Previous research for prediction of fatigue life has been done under the assumptions of a uniform track bed and a homogeneous rail. However the spatial variation of the track stiffness is expected to increase the maximum stresses in the rail and, therefore, accelerate the fatigue process. The research described in this dissertation is focused on …

Generation And Delivery Of Charged Aerosols To Infant Airways, Landon T. Holbrook

Theses and Dissertations

The administration of pharmaceutical aerosols to infants on mechanical ventilation needs to be improved by increasing the efficiency of delivery devices and creating better ways of evaluating potential therapies. Aerosolized medicines such as surfactants have been administered to ventilated infants with mixed results, but studies have shown improvement in respiratory function with a much lower dose than with liquid instillation through an endotracheal tube (ETT). An aerosolized medicine must be transported through the ventilation tubing and deposit in the lungs to have the desired therapeutic response.

This work has taken a systematic approach to (i) develop new devices for the …

A Study To Evaluate Non-Uniform Phase Maps In Shape Memory Alloys Using Finite Element Method, Naren Motte

Theses and Dissertations

The unique thermo-mechanical behavior of Shape Memory Alloys (SMAs), such as their ability to recover the original shape upon heating or being able to tolerate large deformations without undergoing plastic transformations, makes them a good choice for actuators.

This work studies their application in the aerospace and defense industries where SMA components can serve as release mechanisms for gates of enclosures that have to be deployed remotely. This work provides a novel approach in evaluating the stress and heat induced change of phase in a SMA, in terms of the transformation strain tensor. In particular, the FEA tool

ANSYS has …

A Planar Pseudo-Rigid-Body Model For Cantilevers Experiencing Combined Endpoint Forces And Uniformly Distributed Loads Acting In Parallel, Philip James Logan

USF Tampa Graduate Theses and Dissertations

This dissertation describes the development and effectiveness of a mathematical model used to predict the behavior of cantilever beams whose loading conditions include parallel combinations of evenly distributed loads and endpoint forces. The large deflection of cantilever beams has been widely studied. A number of models and mathematical techniques have been utilized in predicting the endpoint path coordinates and load-deflection relationships of such beams. The Pseudo-Rigid-Body Model (PRBM) is one such method which replaces the elastic beam with rigid links of a parameterized pivot location and torsional spring stiffness. In this paper, the PRBM method is extended to include cases …

Electrowetting Force And Velocity Dependence On Fluid Surface Energy, Qi Ni, Daniel E. Capecci, Nathan B. Crane

Faculty Publications

Electrowetting on Dielectric is a phenomenon in which the shape and apparent contact angle of a droplet changes when an electric field is applied across the droplet interface. If the field is asymmetric with respect to the droplet, then a net force can be applied to the droplet. In this work, we have measured the electrowetting force by confining the droplet shape beneath a glass plate and measuring the force on the plate. The force was measured as a function of voltage for a range of fluids with different surface energy. Measured forces show excellent agreement with predictions based on …

Laparoscopic Devices And Methods Of Using, M. Susan Hallbeck, Jakeb Riggle, Adam De Laveaga, Jake Kaufman

Department of Mechanical and Materials Engineering: Faculty Publications

A number of improvements to laparoscopic devices are described herein, primarily to improve the ergonomic functionality of the devices. For example, an articulating rod system is described, a gripping mechanism is described, and an end effector is described

Cruise Ship Preliminary Design: The Influence Of Design Features On Profitability, Justin Epstein

LSU New Orleans Theses and Dissertations

This thesis provides a means to estimate the physical and performance characteristics of a preliminary cruise ship design. The techniques utilized to estimate these characteristics are showcased in the user-friendly interface known as the Cruise Ship Analysis Tool (CSAT). Using the CSAT, the implications that design feature decisions in the preliminary design stage have on a cruise ship’s profitability is analyzed. Then, the most profitable design feature assemblage among a finite number of varying design feature combinations is estimated and compared among cruise ship designs with different passenger carrying capacities. Profitability is analyzed using the measure of merit (MOM) known …

Evaluation Of The Mass Transfer Effect Of The Stalk Contraction–Relaxation Cycle Of Vorticella Convallaria, Jiazhong Zhou

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Vorticella convallaria is a genus of protozoa living in fresh water. It has a bell-shaped zooid equipped with adoral ciliary bands and a contractile stalk tethering the zooid to a substrate. Vorticella is regarded as a biological spring because its contractile stalk can pull the zooid towards the substrate at a remarkably high speed and then relaxes to its extended state much more slowly. However, reasons for Vorticella’s stalk contraction are still unknown. It is presumed that the flow field induced by the contraction-relaxation cycle of Vorticella would augment mass transfer effect near the substrate. We investigated this hypothesis …

Farmbot, James Cruz, Scott Herrington, Bryan Rodriguez

Mechanical Engineering

The purpose of this project was to develop the hardware for the current Farmbot to perform its primary functions, and to create a template for a system that would be adaptable for future users and developers. The scope of the project included creating a universal tool mount, a seeding system, and a watering and nutrient mixing system. This project was brought to the students by sponsor Rory Aronson, the creator of Farmbot. The Cal Poly Farmbot team was able to go through an extensive brainstorming and iterative process for each part, where testing was able to be incorporated immediately due …

Mhttu Implementation Final Project Report, Angelica Ramirez, Julian Samayoa, Matt Keeble

Mechanical Engineering

Lawrence Livermore National Laboratory has invested considerable effort in developing fireproof high-efficiency particulate air (HEPA) filters. Due to the nature of LLNL’s research, the air leaving its lab facilities must be filtered before it is released into the atmosphere; thus, each laboratory is equipped with large banks of HEPA filters through which all internal air is exhausted. Over the years, however, fires have erupted in the labs and entire banks of HEPA filters have been destroyed, resulting in repairs and crucial downtime that prove costly.

Engineers and scientists alike have been seeking a permanent solution to this problem, and one …

Compression Tester Shop Press, Colby Johnson, Brett Russon, Taylor Vandenhoek

Mechanical Engineering

A piece of machinery designed to carry out compression and bending tests on building materials constructed by the Center for Vocational Building Technologies (CVBT) in Isarn, Thailand.

Aeroponic/Hydroponic Growth Module, Sean Marrs, Joshua Moreno

Mechanical Engineering

No abstract provided.

Two-Dimensional Scalar Differential Equations For Transversely Varying Thickness Modes In Piezoelectric Plates And Applications In Acoustic Wave Resonator Sensors, Huijing He

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Generalizations are made for three types of well-known and widely used twodimensional scalar differential equations in the literature describing transversely varying thickness modes in piezoelectric plate resonators. They are for singly-rotated quartz plates, doubly-rotated quartz plates, and plates of crystals of class 6mm with the c-axis along the plate thickness, respectively. The purpose of the generalizations is to include the effects of surface mechanical loads such as mass layers or fluids for resonator -based acoustic wave sensor applications. Surface acoustic impedance is introduced to take into account various surface loads in a general manner for time-harmonic motions. Both unelectroded and …

Experiment And Simulation Of The Acoustic Signature Of Fatigued-Cracked Gears In A Two-Stage Gearbox, Matthew James Ostiguy

Master's Theses

This thesis focuses on the development of a health monitoring system for gearbox transmissions. This was accomplished by developing and understanding a two-stage gearbox computer model that emulates an actual gearbox test rig. The computer model contains actual gearbox geometry, flexible shafts, bearings, gear contact forces, input motor torque, output brake torque, and realistic gearbox imbalance. The gear contact force of each gear stage and the input bearing translational acceleration were the main outputs compared between a healthy gearbox and damaged gearbox computer model. The damage of focus was a fatigue crack on the input pinion gear. A sideband energy …

Modular And Cooperative Medical Devices And Related Systems And Methods, Shane M. Farritor, Mark Rentschler, Amy Lehman

Department of Mechanical and Materials Engineering: Faculty Publications

The various embodiments disclosed herein relate to modular medical devices, including various devices with detachable modular components and various devices with pivotally attached modular components. Additional embodiments relate to procedures in which various of the devices are used cooperatively. Certain embodiments of the medical devices are robotic in vivo devices.

Workspace Analysis Of A Linear Delta Robot: Calculating The Inscribed Radius, Michael Louis Pauly

Graduate Theses - Mechanical Engineering

One of the most important traits of a robotic manipulator is its work envelope, the space in which the robot can position its end effector. Parallel manipulators, while generally faster, are restricted by smaller work envelopes [1]. As such, understanding the parameters defining a physical robot’s work envelope is essential to the optimal design, selection, and use of robotic parallel manipulators. A Linear Delta Robot (LDR) is a type of parallel manipulator in which three prismatic joints move separate arms which connect to a single triangular end plate [2]. In this study, general inverse kinematics were derived for a linear …

Host-Guest Interaction Dictated Selective Adsorption And Fluorescence Quenching Of A Luminescent Lightweight Metal-Organic Framework Toward Liquid Explosives, Dan Liu, Xiaojuan Liu, Yongxin Liu, Yang Yu, Fanglin Chen, Cheng Wang

Faculty Publications

In this article, we report the successful preparation of a Mg-based luminescent MIL-53 metal–organic framework (MOF), namely [Mg2(BDC)2(BPNO)]·2DMF (1) (BDC = 1,4-benzene dicarboxylate, BPNO = 4,4’- dipyridyl-N,N’-dioxide, DMF = N,N-dimethylformamide) in a mixed solvent containing a 2 : 3 volume ratio of DMF and ethanol (EtOH) under solvothermal conditions. Desolvated compound 1a can be used as an absorbent for selective adsorption and separation of liquid explosives, including nitroaromatic (nitrobenzene (NB)) and nitroaliphatic (nitromethane (NM) and nitroethane (NE)) compounds, through single crystal-to-single crystal (SC–SC) transformations. As one of the weakly luminescent MOFs, the luminescence of compound 1a could be quenched by …

Team Nathan Suspension, Frankie J. Wiggins, Alex D. Seitz, Justin P. Bautista

Mechanical Engineering

Nathan Cooper is an 8-year old boy with Spinal Muscular Atrophy (SMA). SMA has affected Nathan’s muscle development and requires him to use the Standing Dani™ mobility device. The Standing Dani is a motorized standing wheelchair, or Wheelstand. Nathan controls and uses it to get around. Though the Standing Dani performs well for most functions, it has some distinct issues. The primary issue that this project addresses is its lack of suspension and the discomfort that Nathan feels as a result. After talking with our client, we developed several specifications generally related to geometry, safety, vehicle dynamics, and reliability. Many …

A Study Of Shock Analysis Using The Finite Element Method Verified With Euler-Bernoulli Beam Theory; Mechanical Effects Due To Pulse Width Variation Of Shock Inputs; And Evaluation Of Shock Response Of A Mixed Flow Fan, David Jonathan Gonzalez Campos

Master's Theses

A Study Of Shock Analysis Using The Finite Element Method Verified With Euler-Bernoulli Beam Theory; Mechanical Effects Due To Pulse Width Variation Of Shock Inputs; And Evaluation Of Shock Response Of A Mixed Flow Fan

David Jonathan González Campos

For many engineers that use finite element analysis or FEA, it is very important to know how to properly model and obtain accurate solutions for complicated loading conditions such as shock loading. Transient acceleration loads, such as shocks, are not as common as static loads. Analyzing these types of problems is less understood, which is the basis for this study. FEA …

Agricultural Industry Advanced Vehicle Technology: Benchmark Study For Reduction In Petroleum Use, Roger M. Hoy, Rodney Rohrer, Adam Liska, Joe D. Luck, Loren Isom, Deepak R. Keshwani

Adam Liska Papers

Diesel use on farms in the United States has remained relatively constant since 1985, decreasing slightly in 2009, which may be attributed to price increases and the economic recession. During this time, the United States’ harvested area also has remained relatively constant at roughly 300 million acres. In 2010, farm diesel use was 5.4% of the total United States diesel use. Crops accounting for an estimated 65% of United States farm diesel use include corn, soybean, wheat, hay, and alfalfa, respectively, based on harvested crop area and a recent analysis of estimated fuel use by crop. Diesel use in these …

Porphyrin Interaction With Dna-Based Carbon Nanotubes And Regeneration For Light Harvesting, Sawyer E. Morgan, Hanyu Zhang, Jong Hyun Choi

The Summer Undergraduate Research Fellowship (SURF) Symposium

Limitations to current solar cells include the high cost of pure silicon and poor current transfer within cells. An emerging alternative is single-walled carbon nanotubes (SWCNTs), which when combined with DNA and porphyrin chromophores can generate a current when absorbing light. We sought to find a chromophore and conditions that would promote bonding to the SWCNTs and improve light harvesting, while being able to regenerate on the film after being damaged. This was experimentally tested by first making SWCNT films on conducting glass slides. These were then functionalized in solutions of chromophore and spectra were measured to determine the bonding …

Development Of Combined Dual-Pump Vibrational And Pure-Rotational Coherent Anti-Stokes Raman Scattering (Dpvcars And Prcars) System, Shenli Yuan, Aman Satija, Robert Lucht

The Summer Undergraduate Research Fellowship (SURF) Symposium

Coherent anti-Stokes Raman scattering (CARS) [1,2] is a spatially-resolved, time-resolved spectroscopic technique for quantitative measurements in reacting flows [3 – 6]. This work demonstrates a combination of N₂/O₂/CO₂ dual-pump vibrational coherent anti-Stokes Raman scattering (DPVCARS) system and two-beam pure-rotational coherent anti-Stokes Raman scattering (PRCARS) system. It is based on the previous development of combined VCARS and PRCARS system which was used to obtain temperature measurements in non-premixed H₂-air flames. The new combined system will be used to measure the temperature profiles and major species concentrations such as N₂/O₂/CO_{2 …}

Increased Span Length For The Mgs Long-Span Guardrail System, Nicholas A. Weiland

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Long-span guardrail systems have been recognized as an effective means of shielding low-fill culverts while minimizing construction efforts and limiting culvert damage and repair. The current MGS long-span design provided the capability to span unsupported lengths up to 25 ft (7.6 m) without the use of nested guardrail. The excellent performance of the MGS long-span system in full-scale crash tests suggested that longer span lengths may be possible with the current design.

A detailed analysis of the MGS long-span guardrail system was performed using the finite element software program LS-DYNA^®. It was shown that the MGS long-span design …

Adaptive Kayak Seating: The Tide Rider 360, Irvin Camacho, Grant Petersen, Audrey Riddle, Andrea Voigt

Mechanical Engineering

The Adaptive Paddling Program at California Polytechnic State University has sponsored the construction of an adaptive kayak seat, the Tide Rider 360, to provide paddlers with disabilities sufficient trunk support while out on the water. In particular, this design focused on providing the least restrictive environment for all users while still providing sufficient lateral, neck, back, and hip support. This seat is intended for use in the quarterly Adaptive Paddling Program to allow people with disabilities to experience the joys of kayaking in the most comfortable and supportive environment possible.

The following report details the background research, design development, manufacturing, …