Engineering Commons^™

Analysis Of Class-Based Storage Strategies For The Mobile Shelf-Based Order Pick System, Shobhit Nigam, Debjit Roy, Rene De Koster, Ivo J.B.F. Adan

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Mobile Shelf-based Order Pick (MSOP) systems are gaining significant in- terest for e-commerce fulfillment due to their rapid deployment capability and dynamic organization of storage pods based on item demand profiles. In this research, we model the MSOP system with class-based storage strategies and alternate pod storage policies using multi-class closed queuing networks. We observe that though closest-open location pod storage policy do not allow to efficiently use the storage spaces in comparison to random location pod storage policy in an aisle, it increases the system throughput for all item classes.

Risk Minimization Of Disjunctive Temporal Problem With Uncertainty, Hoong Chuin Lau, Tuan Anh Hoang

Research Collection School Of Computing and Information Systems

The Disjunctive Temporal Problem with Uncertainty (DTPU) is a fundamental problem that expresses temporal reasoning with both disjunctive constraints and contingency. A recent work (Peintner et al, 2007) develops a complete algorithm for determining Strong Controlla- bility of a DTPU. Such a notion that guarantees 100% confidence of execution may be too conservative in practice. In this paper, following the idea of (Tsamardinos 2002), we are interested to find a schedule that minimizes the risk (i.e. probability of failure) of executing a DTPU. We present a problem decomposition scheme that enables us to compute the probability of failure efficiently, followed …

Introduction To Special Issue Of Journal Of Defense Modeling And Simulation: Novel Approaches To Defense And Military Modeling And Simulation, Scott D. Snyder, James M. Taylor Jr

Peter Kiewit Institute: Faculty Publications

Developing solutions to complex problems in government and industry is a daunting task that often requires tremendous investment in time and resources to solve. Modeling and simulation (M&S) has incredible potential to streamline development and cut costs by conducting virtual experiments that give insight into performance under various test conditions. As many program managers in the federal acquisition process can attest, realistic testing of live equipment in an operational environment can be some of the most expensive parts of a development program. M&S can provide insight into mission success of yetto- bedesigned systems without the need to actually build and …

Simple Multi-Attribute Rating Technique For Renewable Energy Deployment Decisions (Smart Redd), James M. Taylor Jr, Betty Love

Peter Kiewit Institute: Faculty Publications

In the effort to provide electrical power service and the sustaining fuel required to run generators at forward-deployed bases in Afghanistan and Iraq over more than 10 years, the US military spent billions of dollars and a paid a heavy toll in terms of human casualties. The green energy linear program for optimizing deployments (GELPOD) proof-of-concept model showed that a linear program could be used to optimize combat deployment of energy generation systems to minimize cost and casualties. Results indicated that reduction in both cost and casualties for renewable energy sources was highly dependent on fuel cost and deployment length. …

Modular Design Of Physical Internet Transport, Handling And Packaging Containers, Benoit Montreuil, Eric Ballot, William Tremblay

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

This paper proposes a three‐tier characterization of Physical Internet containers into transport, handling and packaging containers. It first provides an overview of goods encapsulation in the Physical Internet and of the generic characteristics of Physical Internet containers. Then it proceeds with an analysis of the current goods encapsulation practices. This leads to the introduction of the three tiers, with explicit description and analysis of containers of each tier. The paper provides a synthesis of the proposed transformation of goods encapsulation and highlights key research and innovation opportunities and challenges for both industry and academia.

Robust Truckload Relay Network Design Under Demand Uncertainty, Hector A. Vergara, Zahra Mokhtari

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

This research addresses the issue of incorporating demand uncertainty in the strategic design of relay networks for truckload transportation. An existing composite variable mathematical model for the design of hybrid relay networks is extended by developing its robust counterpart. The proposed approach considers uncertainty in the number of truckloads to be dispatched between a pair of nodes in the network which is characterized by a symmetric interval around the expected demand value. A two-step heuristic approach is used to solve the robust model. Several numerical experiments are carried out to study the differences between the solutions obtained with the robust …

Optimal Dredge Fleet Scheduling Within Environmental Work Windows, Heather Nachtmann, Kenneth N. Mitchell, Chase Rainwater, Ridvan Gedik, Edward A. Pohl

Mechanical and Industrial Engineering Faculty Publications

The U. S. Army Corps of Engineers oversees dredging in hundreds of navigation projects annually, through its fleet of government equipment and through individual contracts with private industry. The research presented here sought to examine the decision to allocate dredge resources to projects systemwide under necessary constraints. These constraints included environmental restrictions on when dredging could take place in response to the migration patterns of turtles, birds, fish, and other wildlife; dredge equipment resource availability; and varying equipment productivity rates that affected project completion times. The paper discusses problem definition and model formulation of optimal dredge fleet scheduling within environmental …

Autonomous Capabilities For Small Unmanned Aerial Systems Conducting Radiological Response: Findings From A High-Fidelity Discovery Experiment, Brittany Duncan, Robin Murphy

School of Computing: Faculty Publications

This article presents a preliminary work domain theory and identifies autonomous vehicle, navigational, and mission capabilities and challenges for small unmanned aerial systems (SUASs) responding to a radiological disaster. Radiological events are representative of applications that involve flying at low altitudes and close proximities to structures. To more formally understand the guidance and control demands, the environment in which the SUAS has to function, and the expected missions, tasks, and strategies to respond to an incident, a discovery experiment was performed in 2013. The experiment placed a radiological source emitting at 10 times background radiation in the simulated collapse of …

Simulating Real-World Work Experience In Engineering Capstone Courses, Thomas H. Deagostino, Vukica M. Jovanovic, M. Brian Thomas

Engineering Technology Faculty Publications

Experiential learning and cooperative education provide students with the necessary tools to succeed in the workplace by simulating their future working environment. Various studies have shown that many graduates have gaps related to their so called "soft skills", which are related to teamwork, time management, working under pressure and tight deadlines. The main purpose of the inclusion of the industry expert in senior design discussions is to provide meaningful feedback through a competitive led by industry practitioners. In this simulation, the senior engineering students take on the role of actual engineering job functions, on a demanding, continuous basis for the …

A Comparative Analysis Of Spatial Visualization Ability And Drafting Models For Industrial And Technology Education Students, Petros Katsioloudis, Vukica Jovanović, Mildred Jones

Engineering Technology Faculty Publications

The article presents the comparative study on the drafting models and spatial visualization ability of industrial and technology education students in the U.S. It discusses how the study was conducted which examined the issue based on technical drawings and with regards to the impacts of model types. The results reportedly revealed three-dimensional models are effective for promoting learning, however more studies have to be conducted.

Enhancing Agility Of Supply Chains Using Stochastic, Discrete Event And Physical Simulation Models, Alok K. Verma

Engineering Technology Faculty Publications

Managing supply chains in today’s distributed manufacturing environment has become more complex. To remain competitive in today’s global marketplace, organizations must streamline their supply chains. The practice of coordinating the design, procurement, flow of goods, services, information and finances, from raw material flows to parts supplier to manufacturer to distributor to retailer and finally to consumer requires synchronized planning and execution. Efficient and effective supply chain management assists an organization in getting the right goods and services to the place needed at the right time, in the proper quantity and at acceptable cost. Managing this process involves developing and overseeing …

Positioning Automated Guided Vehicles In A General Guide-Path Layout, Abraham Mendoza, Jose A. Ventura

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

The locations of dwell points for idle vehicles in an automated guided vehicle (AGV) system determine the response times for pick-up requests and thus affect the performance of automated manufacturing systems. In this study, we address the problem of optimally locating dwell points for multiple AGVs in general guide-path layouts with the objective of minimizing the maximum response time in the system. We propose a mixed integer linear programming (MILP) formulation for the problem. We also develop a generic genetic algorithm (GA) to find near optimal solutions. The MILP model and GA procedure are illustrated using a two-dimensional grid layout …

Throughput Analysis Of S/R Shuttle Systems, Georg Kartnig, Jörg Oser

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Shuttle systems are used in high performance automated storage/retrieval unit load systems. Each storage level is serviced by one transfer car travelling in dual command operation. One buffer slot is located at both ends of each level. This decouples horizontal travel from vertical input/output moves, which in this case requires two independent vertical reciprocating lifts at each end of the aisle. Other systems work with only one lift used in lower throughput applications. The content of this paper is treated in the following sections starting with a problem definition and a literature survey. This is followed by a detailed functional …

Modeling And Optimization Of Radio Frequency Identification Networks For Inventory Management, Atipong Suriya, Jose D. Porter

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Stock loss and out-of-stocks are outcomes of poorly designed inventory management systems and can lead to significant revenue losses. Inventory management systems (IMSs) based on radio frequency identification (RFID) have the potential to minimize these losses if they are properly designed and deployed. However, the placement of RFID readers to support IMSs is often done on a trial and error basis which is time consuming and results in less than optimal coverage. A methodology to find the optimal location and number of RFID readers in a warehouse facility to ensure a desired level of radio frequency signal coverage was developed …

Integrate Vehicle Routing And Truck Sequencing In Cross-Docking Operations, Ching-Jung Ting, Ting-Don Chen

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Cross-docking is a an important logistics strategy in which freight is unloaded from inbound vehicles and directly loaded into outbound vehicles, with little or no storage in between. This study considers a crossdocking system which combines the vehicle routing problem with crossdocking (VRPCD) for both inbound and outbound operations and truck sequencing problem at docks. The objective is to minimize the logistics center operation costs and transportation costs. We first formulated the integrated problem with a mixed integer programming model. Since VRPCD and sequencing problems are NP-hard, the integrated problem is also an NP-hard problem. We propose an ant colony …

Data Model And Software Tools For Modeling Picking Operations, Jeffrey S. Smith

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Presenter will provide.

Variation In Lifting Behavior During A Highly Repetitive Manual Material Task, Steven A. Lavender

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Presenters will provide.

A Two-Level Stochastic Model To Estimate Vessel Throughput Time, Debjit Roy, Vibhuti Dhingra, Rene De Koster

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

A good estimate of the vessel sojourn time is essential for better planning and scheduling Of container terminal resources,such as berth scheduling,quay crane(qc)assignment And scheduling,and fleet size planning. However,estimating the expected vessel so journ Time is a complex exercise because the time is dependent on several terminal operating Parameters such as the size of the vessel,the number of containers to be loaded and Unloaded,and the through put of the qcs. The through put of the qcs in turn depends On the type and number of transport vehicles,number of stack blocks,the topology of The vehicle travel path,the layout of the terminal,and …

Comparison Of Alternative Configurations For Dense Warehousing Systems, Kevin R. Gue, G. Don Taylor

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

In heavily constrained environments requiring very high density storage, traditional aisle-based warehousing may not provide viable options. One feasible manifestation of high density storage systems is the ‘puzzle-based’ system, in which unit loads are moved through the system via manipulation of empty (escort) locations to retrieve desired items. Another option would be the use of movable concentric rings, with escorts being utilized to enable lateral movements of unit loads between the rings. In this paper, the authors present analytical results to compare retrieval time performance for these two types of high density storage systems for randomly demanded items under various …

Development Of A Heuristics For A Criteria Based Planning Of Pallet Storage Systems, Detlef Spee, Michael Schmidt, Steffen Schieweck

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Reproducible and quantitative reasoning as the foundation for high-quality planning processes evolves to be key to achieve high quality of speed for logistical processes. This article strives to fulfill this demand by developing a coherent heuristics for the planning of pallet storage systems. The heuristics uses quantitative approaches provided by the available literature. In case of nonexistent sources, the missing components are developed and integrated. To be applicable in an industrial environment, the comparison and assessment of the created implementation alternatives is mainly monetary based. The heuristics follows a modular structure to achieve adaptability and extensibility. It explicitly does not …

Characterization Of The Relationship Between Firms And Universities And Innovation Performance: The Case Of Colombian Firms, Fredy Gomez, Tugrul U. Daim, Jorge Robledo

Engineering and Technology Management Faculty Publications and Presentations

Within the National Innovation System, universities play a key role as the main source of knowledge that supports national productivity and as a system that seeks to improve the competitiveness of firms competitiveness and to find answers concerning market needs in today’s fast-changing and globalized economy. Innovation, as a source of competitiveness, is normally supported by a firm’s technological capabilities: internal R&D, external collaborative agreements, and relationships with universities. This study uses a cluster analysis to identify three clusters that represent respectively those firms that interact closely with universities for technology development (which include R&D projects) and technological learning activities, …

Injury Prevention With Physical Therapy, Karen Kott, Margaret F. Lemaster

Rehabilitation Sciences Faculty Publications

(First paragraph) Ergonomics is the study of human performance (positioning and movement) and workplace design, such as equipment, ambience, and placement. The purpose of ergonomics is to maximize productivity by increasing safety, improving work quality, reducing operator fatigue and discomfort, and decreasing the risk of work -related musculoskeletal disorders (MSDs).^1-3

Data Mining Based Hybridization Of Meta-Raps, Fatemah Al-Duoli, Ghaith Rabadi

Engineering Management & Systems Engineering Faculty Publications

Though metaheuristics have been frequently employed to improve the performance of data mining algorithms, the opposite is not true. This paper discusses the process of employing a data mining algorithm to improve the performance of a metaheuristic algorithm. The targeted algorithms to be hybridized are the Meta-heuristic for Randomized Priority Search (Meta-RaPS) and an algorithm used to create an Inductive Decision Tree. This hybridization focuses on using a decision tree to perform on-line tuning of the parameters in Meta-RaPS. The process makes use of the information collected during the iterative construction and improvement phases Meta-RaPS performs. The data mining algorithm …

Where Are The People? The Human Viewpoint Approach For Architecting And Acquisition, Holly A. H. Handley, Beverly G. Knapp, Defense Acquisition Univ Ft Belvoir Va

Engineering Management & Systems Engineering Faculty Publications

The U.S. Department of Defense Architecture Framework (DoDAF) provides a standard framework for transforming systems concepts into a consistent set of products containing the elements and relationships required to represent a complex operational system. However, without a human perspective, the current DoDAF does not account for the human performance aspects needed to calculate the human contribution to system effectiveness and cost. The Human Viewpoint gives systems engineers additional tools to integrate human considerations into systems development by facilitating identification and collection of human-focused data. It provides a way to include Human Systems Integration (HSI) constructs into mainstream acquisition and systems …

A Heuristic For The Analysis Of Truncated Standard Normal Distribution Assemblies, John Walter Ralls, Cesar Ariel Pinto, Shannon R. Bowling, Resit Unal, Charles B. Daniels, S. Long (Ed.), E.H. Ng (Ed.), C. Downing (Ed.)

Engineering Management & Systems Engineering Faculty Publications

The analysis of data sets and process conditions commonly assume the use of standard normal distributions and truncated standard normal distributions (TSND). The use of these distributions has application to various engineering disciplines along with numerous other industries (e.g., financial industries, medical fields, management, etc.). For engineering managers, the use of truncated standard normal distributions has particular relevance when evaluating process conditions commonly associated with assembly tolerances, manufacturing, and associated measures of quality. This article summarizes a heuristic approach for the analysis of assembly-level truncated standard normal distributions and associated research from a recent dissertation (Ralls, 2014). This article provides …

Human System Engineering Applications From Distracted Driving Simulations, Holly A.H. Handley, Cansu Kandemir, S. Long (Ed.), E.-H. Ng (Ed.), C. Downing (Ed.)

Engineering Management & Systems Engineering Faculty Publications

Most of the studies to explore the impact of distracted driving have been descriptive in nature; i.e. the research is conducted in naturalistic settings to evaluate the performance of the driver with and without distracters. However simulation models can also be used that predict the workload for driving tasks. Using concepts from process modeling, baseline models of driving tasks can be created for different driving sequences that include the associated fine motor, visual and cognitive human resources. These models can then be used to evaluate incidents of workload overload caused by different distracters, from both the internal and external vehicle …

Employee-Task Assignments For Organization Modeling: A Review Of Models And Applications, Cansu Kandemir, Holly A. H. Handley, S. Long (Ed.), E.-H. Ng (Ed.), C. Downing (Ed.)

Engineering Management & Systems Engineering Faculty Publications

In this study, we present a review of task assignment problems in organizations, an area that has become more important as tasks become more complex and personnel skills become more specialized. The challenge is to design task assignments that meet all requirements and result in the best organizational performance. The consequences of poor design include failed tasks, reduced efficiency, and inability to meet deadlines. Moreover, inequity of workload between employees can cause lack of job satisfaction, loss of motivation and also boredom.

In general, work processes in organizations consist of different tasks, which require different expertise. Personnel usually have various …

Systems Theory As The Foundation For Understanding Systems, Kevin Macg. Adams, Peggy T. Hester, Joseph M. Bradley, Thomas J. Meyers, Charles B. Keating

Engineering Management & Systems Engineering Faculty Publications

As currently used, systems theory is lacking a universally agreed upon definition. The purpose of this paper is to offer a resolution by articulating a formal definition of systems theory. This definition is presented as a unified group of specific propositions which are brought together by way of an axiom set to form a system construct: systems theory. This construct affords systems practitioners and theoreticians with a prescriptive set of axioms by which a system must operate; conversely, any set of entities identified as a system may be characterized by this set of axioms. Given its multidisciplinary theoretical foundation and …

Strategic Decision Support System Using Heuristic Algorithm For Practical Outlet Zones Allocation To Dealers In A Beer Supply Distribution Network, Michelle Lee Fong Cheong

Research Collection School Of Computing and Information Systems

We consider a two-echelon beer supply distribution network with the brewer replenishing the dealers and the dealers serving the outlet zones directly, for multiple product types. The allocation of the outlet zones to the dealers will determine the quantity of products the brewer replenishes each dealer, which will in turn impact the total warehousing and transportation costs. The non-linear optimization model formulated is difficult to solve to optimality, and the model itself does not include practical business considerations in the distribution business. A heuristics algorithm is designed and easily implemented using spreadsheets with Visual Basic programming to effectively and efficiently …