Engineering Commons^™

Building For Safety: Design Considerations For Refuge Areas In Tall Buildings From Quality Management Perspective, Enass. A. Salama, Heba. M. Gaber, Ahmed. M. Selim

Journal of Engineering Research

New El Alamein City is one of the largest urban projects in Egypt, and the largest project on the north coast. Tall buildings (super high-rise buildings) are considered the prevailing trend by architectural designers to obtain the maximum view of the Mediterranean Sea. The provision of safety evacuation in emergencies for these buildings’ occupants is a crucial challenge from the Quality management point of view. In contrast, there are no sufficient architectural design guidelines for the tall buildings provided by the Egyptian code for protecting buildings from fire, especially the design of the refuge areas. This study aims to investigate …

Effect Of Organic Compounds Additives For Biodiesel Fuel Blends On Diesel Engine Vibrations And Noise Characteristics, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi Prof. Dr. Eng., E. A. El Shenawy Prof. Dr., Mahmoud Soliman Eng.

Journal of Engineering Research

The extensive consumption of petroleum fuel directly correlates with both hazardous exhaust emissions affecting human health and contributing to global warming. Initially, biodiesel fuels were proposed as a viable alternative to address these issues. This perspective finds support in numerous published studies that highlight how the significant catalytic effect of nanoparticles allows for their integration into biodiesel blends, resulting in improved combustion characteristics, reduced exhaust emissions, and enhanced performance. This study investigates the impact of additives on biodiesel fuel properties and its effects on engine performance metrics such as brake power, brake thermal efficiency, exhaust gas concentration, engine vibration, and …

Investigation Into The Impact Of Ammonia Hydroxide On Performance And Emissions In Compression Ignition Engines Utilizing Diesel/Biodiesel Blends, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Mohammed Osama Elsamadony Dr. Eng., Abdallah Salem Abdalhadi

Journal of Engineering Research

In recent times, there has been a surge in scientific endeavors aimed at combating global warming. Various methods have been employed to address this issue, including the substitution of fossil fuels with more environmentally sustainable alternatives and the combination of different fuel types. This can be achieved through the integration of innovative injection systems and the simultaneous combustion of alternative fuels alongside fossil fuels, or by modifying fuel injection systems such as in the PCCI, RCCI, or HCCI systems. In a particular research investigation, a blend of ammonia hydroxide and diesel, with volume percentages of 7.5% and 92.5% respectively, was …

Enhancing Diesel Engine Performance By Directly Injecting Blends Of Ammonium Hydroxide And Including Liquid Petroleum Gas As A Partially Premixed Charge, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Mohammed Osama Elsamadony Dr. Eng., Abdallah Salem Abdalhadi

Journal of Engineering Research

Recently, scientists have made significant strides in addressing or mitigating environmental issues. Researchers have adopted various approaches to tackle these issues, such as replacing fossil fuels with more environmentally friendly alternatives or blending multiple fuel types. This can be achieved by either integrating these two trends through the use of new injection systems and simultaneous combustion of alternative fuels with fossil fuels or by modifying fuel injection systems, exemplified by the PCCI, RCCI, or HCCI systems. Consequently, these methods have proven effective in reducing environmental pollutants, enhancing thermal efficiency, and decreasing specific fuel consumption. In this study, ammonia hydroxide and …

Experimental Investigation On Combustion And Emission Characteristics Of Co-Combustion Of Pulverized Biomass With Diesel Fuel In An Industrial Burner, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Ahmed Abou El-Yazied Prof. Dr., Saad El-Malla Dr. Eng.

Journal of Engineering Research

This study presents the combustion and emission results obtained from a laboratory furnace equipped with a 35 kW industrial burner that utilizes co-combustion of pulverized biomass and diesel fuel. The experiment compared the co-combustion of pulverized biomass and diesel fuel with diesel fuel alone. Three different loading ratios of pulverized biomass from residual beet samples were used. Temperatures were measured at various positions inside the furnace to analyze combustion performance. It was observed that increasing the biomass loading ratios led to higher flame temperatures and improved combustion compared to diesel fuel alone. The concentrations of pollutants such as Co, HC, …

Cfd Study On Two-Phase Flow Patterns In A Pipe With 90º Elbow In Different Operating Conditions, Hagar Alm-Eldin Bastawissi, Mohammed Ahmed Khafagy, E. A. El Shenawy Prof. Dr., Ahmed M. Salem Dr

Journal of Engineering Research

Recently, CFD has offered a technological solution for modelling multi-phase flow in which we can make endless simulations with reduced expenses and effort in high accuracy results; we shall also mention that experimental studies have limitations for safety considerations when experimenting with flow in high temperature or pressure values or medium nature as in nuclear or chemical flows.In this paper, we used the ANSYS FLUENT CFD program to simulate the two-phase flow in a pipe to study the effect of attaching a 90-degree elbow fitting to the piping system, seeking to find out the change in the pattern and resulting …

تقنيات الاضاءة الصناعية وتأثيرها فى الفراغ السكنى على السلوك الانسانى, Samah Kamal Elfeky, Walaa Ahmad Nour, Lobna Abdelfatah Agha

Journal of Engineering Research

* Lighting is considered of main items in daily life begining from natural Lighting to industrial lighting. with all of it's different shapes . it is considerdone of the most important data that point Blank spaces and works to show architectural spaces, aesthetic values through being sharp and weak, ensure borders show texture or hide Features, suggest wideness, narrowness of space as the most beautiful design don't see beautiful without good lighting which designed carefully.Due to diversity of human activities, architictums spaces and it is wideness. Increased dependence on industrial Lighting to strengthen Job of performance, beauty of internal, external …

The Influence Of Green Building Design On Tourists' Intention To Stay In Eco-Friendly Hotels: A Study On Perceptions And Preferences, Enas Al Sayed Salama Dr., Gehad Nasr Abdelsalam Dr.

Journal of Engineering Research

Green building design involves integrating sustainable and environmentally friendly practices into the construction and operation of buildings, including hotels, with the goal of minimizing the adverse impact on the environment. This paper delves into the pivotal role of green building design and eco-service provision within the context of green hotels. The aim is to investigate the interconnections among tourists' environmental concerns, their perceived significance of green building design, and their intention to choose green hotels.

To enhance the understanding of tourist behavior and its implications for tourism in Egypt, a questionnaire was administered in Sharm El Sheikh, a prominent Egyptian …

Experimental Study Of Bent Glass Curtain Walls., Sarah Said Abd El Kariem, Moustafa El Shami, Mahmoud El Nagar

Journal of Engineering Research

A Bent Laminated Glass is commonly used in the residential and commercial structures, its methodology is not present in the curves and tables at the ASTM E1300. Therefore, it has become a need for architects to use basis for this type of glass. To the best of authors ‘knowledge, no one study the bent laminated glass in details. A variety of safety glass that has lately gained popularity in the construction sector is modern laminated glass. Given that it offers a safe failover capability, it is perfect for the automotive industry. Double-lite glass is produced using two or more …

Market Analysis And Bidding Strategy Of Hybrid Renewable Energy Systems Considering Emissions, Fatma Elzahraa, Mohamed Elnemr, Samir Dawoud

Journal of Engineering Research

The competition in the electricity markets makes it difficult to choose a suitable strategy for maximizing profit while reducing harmful emissions. To have an adequate energy price for consumers while minimizing the harmful emissions to the atmosphere and maximizing profits of all participants in the electricity market needs an aggressive bidding strategy. Developing these bidding strategies with the integration of renewable energy (RE) in the electricity market became important. This research studies various bidding strategies for maximizing profits in the deregulated energy market since participants are keen on developing bidding strategies considering emissions. These bidding strategies will consider the integration …

Effects Of Fuel Equivalence Ratio And Swirl Vane Angles On Premixed Burner Turbulent Flame Combustion Characteristics, Medhat Elkelawy Prof. Dr. Eng., E. A. El Shenawy Prof. Dr., Hagar Alm-Eldin Bastawissi Prof. Dr. Eng., Ibrahim Ali Mousa Eng., Mohamed M. Abdel-Raouf Ibrahim Dr. Eng.

Journal of Engineering Research

A turbulent flow field has a major effect on the premixed flame structure and temperature distribution that specifically determines the effectiveness of the burned fuel and the amounts of produced emissions. However, the premixed flame tangential and axial velocity distribution through the flame length help to predict the combustion and emissions attributes of the burned fuel. In this regard, an experimental and analytical investigation on premixed turbulent burners at different equivalence fuel-air ratios with different swirl vane angles has been achieved in the present work to assess the combustion performance and emissions characteristics. A theoretical methodology was carried out to …

Enhancing The Performance Of Conventional Solar Still Using The Nano-Doped Paint (Ndp) Coating, Hagar Alm-Eldin Bastawissi Prof.Dr, Nermin Elgendy Engineer, Ayman R. El-Tohamy

Journal of Engineering Research

Nations are throughout the entire globe continuously confronting the problem of potable water shortage. Recently, it has been thought that using solar energy to desalinate brackish water offers a practical answer to the world's water crises. The output of these stills, is meager, and academics haven't done much to boost it in any way. Solar distillers have been proposed as an efficient method to produce potable water. In recent years, saltwater has produced drinking water by various ways. The efficiency of a solar distiller is significantly influenced by various factors, most important factor of them is the absorber surface. In …

Engine Performance And Emissions Improvement Study On Direct Injection Of Diesel/Ammonia Dual Fuel By Adding Cng As Partially Premixed Charge, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi Prof. Dr., Mohammed Osama Elsamadony Dr. Eng., Abdallah Salem Abdalhadi Eng.

Journal of Engineering Research

Researchers have recently moved on in their studies to find a solution to prevent or reduce this problem. There have been directions taken by researchers to solve the problem, including, replacing fossil fuels with environmentally friendly types or by combining two or more types of fuel. This is by modifying fuel injection systems as appears in the PCCI, RCCI, or HCCI systems, or working to integrate the two trends by using new injection systems and burning alternative fuels with fossil fuels. Therefore, the trend has good results on the specific consumption of fuel, raising thermal efficiency, and working to reduce …

Experimental Study On The Impact Of Secondary Air Injection And Different Swirl Van Angles On Premixed Turbulent Flame Propagation And Emission Behaviors, Medhat Elkelawy Prof. Dr. Eng., E. A. El Shenawy Prof. Dr., Hagar Alm-Eldin Bastawissi Prof. Dr. Eng., Ibrahim Ali Mousa Eng., Mohamed M. Abdel-Raouf Ibrahim Dr. Eng.

Journal of Engineering Research

The objective of the present paper is to investigate experimentally the flame characteristics utilizing different secondary air inlet direction for different primary air swirl numbers and equivalence fuel-air ratios. In this study, an experimental test rig was carried out to investigate the flame temperature and emission behavior with flame length at the equivalence fuel-air ratios taken0.96, 0.80, 0.70, and 0.60, and swirl vane angles were varied as 20, 30, 45, and 60° to generate different swirl numbers of 0.26, 0.416, 0.71 and 1.23, respectively. In addition to the introduction of secondary air in test combustor, whereas the primary air and …

The Effect Of An Existing Tunnel And A Newly Excavated Tunnel On Ground Loss Beneath Sand Slope-3d Numerical Study, Ashraf Nazir, Ahmed Nasr, Asmaa Saeed

Journal of Engineering Research

Abstract- Most researchers perform their numerical models for tunnels by modeling perfectly horizontal ground surfaces above the tunnels. The prediction of surface settlement of a sandy slope due to the interaction mechanism between the slope and the tunnels is one of the critical problems in urban areas. As a result, in this work, a numerical analysis using PLAXIS 3D TUNNEL has been performed to investigate the effect of tunnel excavation on the deformation of a shallow sandy slope, and empirically by the Herzog method. The study also assesses the influence of parameters on slope deformation that have not been …

Levofloxacin Incorporated Extracellular Matrix Nanoparticles For Pulmonary Cystic Fibrosis Infections, Raahi Patel

Theses and Dissertations

Cystic fibrosis (CF) is a progressive genetic disorder that affects around 40,000 people in the United States. CF is characterized by a mutation in the CFTR protein that causes dysregulated ion transport across epithelial cells, producing viscous mucus in the lung that increases bacterial invasion, causing persistent infections and subsequent inflammation. Pseudomonas aeruginosa and Staphylococcus aureus are two of the most common infections in CF patients that are resistant to antibiotics. One antibiotic approved to treat these infections is levofloxacin (LVX) that functions to inhibit bacterial replication, but can be further developed into tailorable particles. Nanoparticles are an emerging inhaled …

Unveiling Pain: Wearables For Objective Pain Measurement, Hanqing Tang

Masters Theses

">">Pain perception is a subjective experience that differs significantly among individuals, often leading to inconsistencies in assessment and management. A critical issue within this context is the gender bias in pain evaluation, which contributes to unequal treatment and perpetuates gender inequality within the healthcare system. This thesis presents an in-depth investigation of the problem and proposes the development of a wearable device for objective pain assessment. Physiological parameters — Electrocardiography (ECG) can be collected from cardiac sound signals auscultated by fabrics via nanometre-scale vibrations. Machine learning methods can accurately classify heart rate and acute pain intensity of participants. …

Preparing Homogenous Composites Of Collagen And Cellulose Nanocrystals For Tissue Engineering Research, Zachary Stanley

Biological and Agricultural Engineering Undergraduate Honors Theses

Advancements in medicine and our understanding of stem cells have led to a greater emphasis on further developing research focused on tissue engineering. This research has led to the rise of both two-dimensional and three-dimensional scaffolds that can be utilized to repair bone, skin, vascular, and potentially even nervous tissue. One of the prominent compounds used in modern scaffolds is collagen-based hydrogels due to their low antigenicity and ability to provide structure to cells. There is potential to further improve upon this three-dimensional scaffold by incorporating cellulose nanocrystals (CNCs) into a composite hydrogel with collagen. The addition would increase the …

Coulomb Blockade-Mediated Field Emission Sources Using Ultra-Nanocrystalline Diamond, Jevin Jensen

Graduate Research Theses & Dissertations

Coulomb Blockade effects in field emission provide interesting means of achieving brighter electron sources for numerous applications, ranging from vacuum electronics to the next generation of electron beam technology. Microelectronics cleanroom methods are presented in this thesis for production of field emission sources moderated by the Coulomb Blockade. The use of common processes is an essential step toward widespread experimentation with Coulomb Blockade-mediated field emission apparatuses. The main feature to be explored is the use of nano-diamond films for their potential applicability for this desired outcome. Ultra-Nanocrystalline Diamond is used in two different ways to achieve this, both as a …

Interactions Of Carboxylated Nanodiamonds With Mouse Macrophages Cell Line And Primary Cells, Maisoun Bani-Hani, Stephen J. Beebe, Michael W. Stacey, Christopher Osgood

Bioelectrics Publications

Nanodiamonds (ND) have attracted significant interest for their use in several biomedical applications. These applications can be very useful if the safety and compatibility of ND are proven. We assessed the effects of ND (100 nm, Carboxylated) on primary macrophages and a macrophage-like cell line and found that these particles are not toxic to these cells at lower concentrations but may interfere with cell functions and differentiation. Internalization of ND by these cells in a time- and dose-dependent manner was mostly via phagocytosis and clathrin-dependent endocytosis and localized to the cytoplasm but not into the nucleus. No significant induction of …

Effect Of Decorating Super Paramagnetic Iron Oxide Nanoparticles With Silver Nanoparticles On Their Magneto-Photo Thermal Heating Efficiency, Anthony Joseph Afful

All Graduate Theses, Dissertations, and Other Capstone Projects

Cancer treatment is rather dangerous to the body, often involving many secondary effects, including nausea, hair loss, and weight fluctuations. The search for non-invasive, highly efficient, and targetable treatments ameliorates these issues. Super paramagnetic iron oxide nanoparticles (SPIONS) have been used for other medical purposes such as magnetic resonance imaging contrast agent and is being extensively studied as a potential candidate for many cancer therapeutic and diagnostic approaches due to its biocompatibility and superior magnetic properties. When subjected to an external alternating magnetic field SPIONS generate heat mainly due to the friction of the SPIONS against the fluid it is …

Frontiers In The Self-Assembly Of Charged Macromolecules, Khatcher O. Margossian

Doctoral Dissertations

The self-assembly of charged macromolecules forms the basis of all life on earth. From the synthesis and replication of nucleic acids, to the association of DNA to chromatin, to the targeting of RNA to various cellular compartments, to the astonishingly consistent folding of proteins, all life depends on the physics of the organization and dynamics of charged polymers. In this dissertation, I address several of the newest challenges in the assembly of these types of materials. First, I describe the exciting new physics of the complexation between polyzwitterions and polyelectrolytes. These materials open new questions and possibilities within the context …

Producing And Measuring Oscillatory Shear In A Novel Microfluidic Chip, Sanaz Lordfard, Daniel Lorusso, Tamie L. Poepping, Hristo N Nikolov, Kayla Soon, Stephen Sims, Jeffrey Dixon, David Holdsworth

Undergraduate Student Research Internships Conference

Purpose: To demonstrate the effectiveness of a novel microfluidic device mimicking oscillatory blood flow, allowing cell biologists to examine how endothelial cells respond to a range of oscillatory shear stress levels.

Methods: The microfluidic chip consists of a circular-shaped reservoir, leading to a rectangular channel that is examined under a microscope. The plunger is connected to a speaker system and oscilloscope, allowing the plunger to apply a range of frequencies (5-60Hz) and voltages (5-10 V, leading to a variety in oscillation amplitudes) to the reservoir region. 1.1 um fluorescent particles diluted in distilled water were used for tracking. Processing was …

Biomedical Applications Of Lanthanide Nanomaterials, For Imaging, Sensing And Therapy, Qize Zhang, Stephen O'Brien, Jan Grimm

Publications and Research

The application of nanomaterials made of rare earth elements within biomedical sciences continues to make significant progress. The rare earth elements, also called the lanthanides, play an essential role in modern life through materials and electronics. As we learn more about their utility, function, and underlying physics, we can contemplate extending their applications to biomedicine. This particularly applies to diagnosis and radiation therapy due to their relatively unique features, such as an ultra-wide Stokes shift in the luminescence, variable magnetism and potentially tunable properties, due to the library of lanthanides available and their multivalent oxidation state chemistry. The ability to …

A Highly Conductive, Flexible, And 3d-Printable Carbon Nanotube-Elastomer Ink For Additive Bio-Manufacturing, Andy Shar, Phillip Glass, Daeha Joung Ph.D.

Undergraduate Research Posters

The synthesis of a highly conductive, flexible, 3D-printable, and biocompatible ink has been of great interest in the field of bio-based additive manufacturing. Various applications include ultra-sensitive, microscale tactile sensors, patient-customizable scaffolds for cardiac and nerve tissue regeneration, and flexible electrocardiogram (ECG) electrodes. Here, a novel elastomeric carbon nanocomposite is presented consisting of amino-functionalized carbon nanotubes (CNT-NH₂) homogenously dispersed in a one-part room-temperature vulcanizing (RTV) silicone matrix. The use of acetone as a swelling solvent aids in electrical percolation through the elastomer matrix. CNT-NH₂ ratios can be tuned to fit various needs; higher tensile strength is favored …

Characterization Of Nanoparticles Using Inductively-Coupled Plasma Mass Spectrometry, Jabez D. Campbell

MSU Graduate Theses

Nanomaterials are a relatively new class of materials that have many applications which span a wide host of fields from medical products to consumer products. The possible compositions and forms of nanomaterials are just as varied as the applications. Therefore, a versatile characterization method is needed for researchers and regulators alike to ensure nanomaterials are properly used. Single Particle Inductively Coupled Plasma Mass Spectrometry (SP-ICP-MS) is a functional method that could fill the characterization need in the nanomaterial research field. Using data from both SP-ICP-MS tests and data from literature established characterization methods, the viability of making SP-ICP-MS the standard …

Multifunctional Programmable Self-Assembled Nanoparticles In Nanomedicine, Yoshie Sakamaki

Graduate Theses and Dissertations

Developing methodologies to control the architecture of nanoparticles (NPs) at the atomic level prevents their inhomogeneity and leads to a variety of expected functions. Rationally designed nanoparticles can either be programmed or crystallized structures into pre-determined structures achieving tunable particle pore size and physiochemistry. In this dissertation, two broad classes of multifunctional nanoparticles are developed, metal-organic frameworks and DNA-NP aggregates.

Metal-organic frameworks are a novel class of highly porous crystalline materials built from organic linkers and metal cluster-based secondary building units. However, applications in bioremediation have not been developed very well especially in applications regarding drug delivery systems (DDS). The …

Synergistic Anticancer Response Of Curcumin And Piperine Loaded Lignin-G-P (Nipam-Co-Dmaema) Gold Nanogels Against Glioblastoma Multiforme, Xinyi Zhao, Bilal Javad, Daxing Cui, James Curtin, Furong Tian

Articles

Glioblastoma multiforme (GBM) is the most aggressive and commonly diag- 11 nosed brain cancer and presents a strong resistance to routine chemotherapeutic drugs. 12 The present study involves the synthesis of Lignin-g- p (NIPAM-co-DMAEMA) gold 13 nanogel, loaded with curcumin and piperine to treat GBM. The application has three 14 functions: (1) overcome the limitations of biodistribution, (2) enhance the toxicity of an- 15 ticancer drugs against GBM, (3) identify the uptake pathway. Atom transfer radical 16 polymerization was used to synthesize the Lignin-g-PNIPAM network, crosslinked with 17 the gold nanoparticles (GNPs) to self-assemble into nanogels. The size distribution and …

Molecular Dynamics Simulations Of Self-Assemblies In Nature And Nanotechnology, Phu Khanh Tang

Dissertations, Theses, and Capstone Projects

Nature usually divides complex systems into smaller building blocks specializing in a few tasks since one entity cannot achieve everything. Therefore, self-assembly is a robust tool exploited by Nature to build hierarchical systems that accomplish unique functions. The cell membrane distinguishes itself as an example of Nature’s self-assembly, defining and protecting the cell. By mimicking Nature’s designs using synthetically designed self-assemblies, researchers with advanced nanotechnological comprehension can manipulate these synthetic self-assemblies to improve many aspects of modern medicine and materials science. Understanding the competing underlying molecular interactions in self-assembly is always of interest to the academic scientific community and industry. …

Impact Of Angiogenic And Osteogenic Factors In The Presence Of Biodegradable Piezoelectric Films, Jayla Millender

University Scholar Projects

One of the most common causes of bone graft rejection is lack of a vascular network connecting the graft to the existing native tissue – allowing for nutrient flow. Under current grafting techniques, the existing blood vessel network in the patient slowly invades the implant in order to supply the injured site with its necessary nutrients. The purpose of this research is to determine if a synthetic bone graft with a stable microvascular network can be developed in vitro. I hypothesize that the use of indirect angiogenic factors such as sonic hedgehog homolog and hypoxia-inducible factor-1 in combination with the …