Engineering Commons^™

A Study Of Size Of Diamonds In Diamond Drilling, Robert J. M. Miller

Masters Theses

" ''A Study of Size of Diamonds in Diamond Drilling' is the research problem which will be discussed in this treatise.

The author's interest in the effect of size of diamonds was created by Mr. R. D. Longyear of the E. J. Longyear Company of Minneapolis, Minnesota. Mr. Longyear, when asked for suggestions for a research problem concerning diamond drilling suggested, among other things, that there was a need for further work on the factor of size of stones. After extensive reading and reviewing, the author learned that many investigators had recognized changes in results attributable to changes in size …

A Comparison Of The Real Price And Market Price Of Some Common Metals, Kon-Hock Khaw

Masters Theses

"A number of complex factors influence the fluctuation of the price of a metal. In this investigation, the writer is concerned with the influence of the purchasing power of the dollar and, therefore the difference between the value (real price) and market price of nine metals. That is, this is a study of metal prices and their corresponding values. No attempt is made to analyze the supply and demand of the past or the future, except as they are expressed by their function -- price.

To aid in the comparison, a set of index numbers for metals is compiled and …

Shaped Charges: Their Mechanism And Applications In Mining, Pranlal Girdharlal Sheth

Doctoral Dissertations

"A shaped charge, confined or unconfined, is a unit of explosive material with a cavity or hollow at the base. It behaves differently than an ordinary charge, and, when detonated, has been found to produce curious effects of concentrating the force of the explosive on an area opposite the cavity"--Introduction, page 1.

Magma 1951, Associated Students Of The Montana State School Of Mines.

Magma 1948-1997

No abstract provided.

The Use Of Oil-Base Drilling Fluids, William Wesley Collins

Masters Theses

"Within the past few years the development of oil-base drilling fluids has become one of the more important contributions to drilling and production technology. The use or these new muds has increased as the benefits obtained have become more widely known and appreciated. Major problems in the petroleum industry have been, for many years, the contamination or drilling muds by salt water; control of mud when drilling through anhydrite, gypsum, or salt deposits; control of heaving or swelling shale; and water or mud blocking or the producing horizons. The development or oil-base drilling fluids is a direct contribution or engineers …

The Relationship Of Regional Structural Geology To The Ore Deposits In The Southeastern Missouri Mining District, Jack Alexander James

Doctoral Dissertations

"The lead deposits in the Southeastern Missouri mining district have been examined by numerous geologists and mining engineers since the original discovery about 1720. A list of the men who have reported on them includes some of the outstanding students of ore deposits.

The regional geology in the mining district either was unknown or only vaguely known when most of the early examinations were made, and the discussions of the structural geology are restricted in scope owing to the lack of detailed information. The reports based on these examinations, although excellent for their time, are incomplete in view of the …

Recovering Oil From An Unconsolidated Sand By Means Of Combustion, David K. Anderson

Masters Theses

"For many years, there has been talk expressing great concern about the oil reserves in the United States. Every four or five years, articles are published stating that we are running out of oil and our proved reserves, to date, are only adequate, at our present rate of consumption, for about 20 years. While this is true, it does not leave us with the complete picture. The industry in the past 20 years has never had more than a 20 year reserve. It must be said, however, that it is becoming more difficult with each passing year to find oil …

Stress Analysis Of Thin Bedded Mine Roofs Subjected To Evenly Distributed Lateral Load And Supported By Barrier Pillars, Sahap Sakip Aybat

Masters Theses

“Theoretical stress analysis in mine structures begins with the assumption that the structural elements are homogeneous, isotropic and perfectly elastic. It is this writers belief that stresses in a mine roof supported by barrier pillars may be compared to those stresses which may be found in a thin plate supported and restrained in the manner similar to such a mine roof. Therefore the stress and moment equations developed for plates are herein applied to mine roofs of limited thickness.

A thin roof bed which is stressed with evenly distributed lateral load and supported with barrier pillars will be regarded as …

Uses And Advantages Of Short Period Delay Blasting Systems In Mining And Quarrying, Irving C. Falk

Masters Theses

"One of the most recent developments in blasting practice is that of applying the principle of short period delay electric blasting. In this type of electric blasting, instead or having all holes fire at one time, each hole or group of holes is a shot in itself. To provide a short period delay, of a few thousandths of a second, between each hole or group of holes, either millisecond (split-second) delay electric blasting caps or a suitable delayed action blasting switch may be used.

Short period delay electric blasting systems were originally developed for use by quarries in or near …

Well Interference In The South Silica Field, Langdon B. Taylor

Masters Theses

"During World War II the Federal Government restricted oil-field drilling in the United States in order to conserve steel. The wartime regulations required 40-acre spacing in most areas. At the close of the war, the Federal drilling restrictions were lifted, and control of oil-well spacing reverted to the several state regulatory bodies. Each of these state agencies was then confronted with this problem: should 40-acre spacing be continued or should pre-war 10- and 20-acre spacing patterns be re-established?

The regulatory authority in Kansas, the State Corporation Commission, ordered an investigation in January, 1946, for the purpose of developing information upon …

Increased Stripper Well Recovery By Means Of High Voltage Electrical Heating, John Curtin Schratwieser

Masters Theses

"The purpose of this work is to investigate the possibility of using high voltage electrical heating to obtain increased stripper well production.

A substantial portion of the oil produced in the United States is obtained from stripper wells. These wells reach their economic limit when they can no longer produce sufficient oil to justify the cost of operation. In the majority of cases, however, there is still a high percentage of oil in the sand. If a production stimulus of sufficient magnitude is introduced into the formation, oil, otherwise nonproducible, may be recovered. It is the writer’s thesis that high …

A Method Of Mining The Kumtepe Lignite Deposit Of Turkey, Hilmi Dokuzoglu

Masters Theses

"The Agacle lignite deposit, as a potential source of fuel, near Istanbul, Turkey has been used in this study to apply the principles of strip mining operations. The details of the deposit upon which this thesis is predicated will be presented later in this paper.

The fuel requirement of the city of Istanbul with a population of nearly a million is considerably greater then can easily be met. Some of the fuel needs are accommodated by electrical energy by producer gas, by bituminous coal brought from Zonguldak (about 200 miles from the city), by charcoal, and by fuel wood. During …

The Underground Electrocarbonization And Gasification Of Mineral Fuels, Erich Sarapuu

Doctoral Dissertations

"The development of underground gasification methods for recovering mineral fuels is comparatively recent and several methods have been evolved for treating the various source materials. The problem of recovering solid and liquid fuels by underground gasification in gaseous form was primarily approached by means of opening underground entries which created the required fire-drift for starting the gasification in place.

Increasing knowledge of the whole problem of gasification in situ led to the evolution of new improvements in the underground gasification technique and, in the course of progressive research the preparations required for starting the gasification were accomplished from the surface. …

An Experimental Evaluation Of Explosives In Blasting Limestone And Granite, Harve Preston Nelson

Doctoral Dissertations

"The purpose of this study was the evaluation of military and commercial explosives. A standardized index of effectiveness was used as the basis of comparison.

Testing was conducted at the Experimental Mine of Missouri School of Mines and Metallurgy at Rolla, Missouri, and at Graniteville, Missouri. At the school mine, 16 drift rounds, 8 slab rounds and 70 quarry tests were made in the dolomitic limestone. This rock, known locally as the Quarry Ledge of the Jefferson City formation, is of Ordovician Age"--Abstract, page ii.

Experimental Studies Of The Effect Of Moisture On Strength Of Mine Roof-Shales, Rolf W. Roley

Professional Degree Theses

"The mining and production of coal by underground mining operations has long been recognized as one of this nation's most hazardous industries. Tabulated data from the State of Illinois, for example, reveal that in that State between 1882 and 1945 there have been 7,789 men killed in coal mining accidents of one form or another. Further inspection of the data indicates that 3,711 of these men were killed underground by falls of roof or rock….

As previously stated, this experiment was designed to determine whether or not any appreciable change in strength as measured by Transverse Breakage would result from …

Effects Of A Reverse Order Of Firing Using Millisecond Delay Electric Blasting Caps In A Quarry Operation, Reginald John Jones

Masters Theses

"Evidence of the steady increase in the production of quarries is a reflection of the improved blasting practices that are being used. New explosives, the new millisecond electrical blasting caps and the endless experimentation carried on by both manufacturer and operator continue to aid or better the old methods of quarry blasting. In many instances the better results were obtained from practices hitherto unknown or at least unused. This report describes the results obtained from comparing quarry rounds shot in the accepted firing order and those shot in the reverse order of firing. The purpose of the report is to …

Principles And Practices Controlling The Use Of Earthmoving Equipment, Woodrow John Latvala

Masters Theses

"The purpose of this study is to show how the efficiency in earthmoving projects can be increased by the application of engineering principles. Efficiency can be increased by choosing equipment to fit the given set of conditions; and, having chosen the equipment, operate it at its maximum efficiency. In order to choose the right equipment it is necessary to study the conditions under which the equipment must operate. It is then necessary to study the machine in order to ascertain its adaptability to the existing conditions"--Introduction, page 1.

Efficiency Studies Of The Effect Of Moisture On The Power Consumption Of Mine Scrapers, Georges J. Vigier

Masters Theses

"Many years of practice have resulted in the standardization of several types of scrapers which are now commonly manufactured for use in mining. Although experience has brought out much information on scraping operations, no systematic studies of the efficiency of mine scrapers have been carried out before the experimental works done in the last few years at Missouri School of Mines and Metallurgy. "Purpose of Problem": The purpose of this present study is to consider the effect which moisture in the muck has on the efficiency as regards power consumption and amount of material scraped, of different types of mine …

A Study Of Mine Scraper Efficiency On Materials Of Different Specific Gravities, Kermit Guy Rowley

Masters Theses

"The purpose of this study is to determine the effect that the specific gravity of the material scraped has on the power consumption and the efficiency of the common types of mine scrapers. As scraper weight, rope speed, and moisture content of the muck are important factors affecting the power consumption and efficiency, these variables are the ones considered for each type scraper. Two materials of different specific gravities are used in the study with an equal number of tests run on each material"--Introduction, Purpose of Problem, page 2.

A Study Of The Efficiency Of Split-Second Delay Electric Blasting Caps In Underground Limestone Mining, John B. H. Fitzwilliam

Masters Theses

"The introduction of electric blasting caps have delay intervals of the order of one-half to one second proved of advantage in many aspects of underground mining, particularly development work. Their use spread, until they now supersede fuse-and-cap firing wherever possible. Split-second delay electric blasting caps are a comparatively recent development from conventional delay caps. They have been found of practicable use in quarrying operations, and have been applied in many phases of underground mining. While evidence, to show that short-delay firing in quarrying is more efficient than instantaneous firing, is becoming increasingly conclusive, it remains to be proved that split-second …

A Comparative Study Of Some Rock Drill Bits, Charles Roger Knopp

Masters Theses

"The detachable single-use rick-drill bit has attracted considerable attention in the mining industry of the United States during the past few years. While this type of bit has been used for some time in other countries, it has been only recently that these bits have been manufactured in the United States. It was decided to test this type of bit and make a comparative study of a single-use bit and a widely used detachable rock-drill bit"--Introduction, page 1.

Effect Of Unionism On Cost Of Coal, Subrahmanya Padmanabhan

Masters Theses

"Coal is not only the base of our civilization and a key to our continued high standard of living but it is also playing a leading part in the recovery of Europe and other backward nations of the world. Our dependency upon coal as a basic source of energy is growing greater and greater every day. Some day atomic power may be our principal source of energy but the list of technical obstacles that block the way for widespread and commercial use of atomic energy is a long one. Unlike its competitors, such as petroleum and natural gas, the reserves …

Rockbursts, Christian Maurice Colson

Masters Theses

"This paper does not pretend to originality; it is an attempt to bring to light the causes and the mechanism of rockbursts, as exposed in the literature. Furthermore, an endeavor has been made to give a comprehensive picture of the prediction, prevention, and control methods of rockbursts. Briefly, what has been done in the field of rockbursts, and what remains open to investigation is submitted to the reader. The choice of rockbursts as a thesis subject appears to be justified by the geologic interest of the question. Detailed geologic observations, and particularly the recording of all the structural features which …

Effects Of Higher Speed Explosives In Drift Rounds, Harve Preston Nelson

Masters Theses

"There is much still to be learned of what takes place in the actual explosive zone of a rock blast. Many factors, both known and unknown, have individual and collective effects. A program is now in progress by the Mining Department of Missouri School of Mines and Metallurgy for developing and preserving information about some of the factors affecting the use of explosives. Some work has been done. More is now being completed by Messrs. R. J. Jones and J. B. H. Fitz-William. Present plans call for continuing the research and gathering data on this subject which is so important …

Safety And Health In Mining, John Philip Lacke

Masters Theses

"The mining industry has long been criticised severely because of its high rate of accident occurrence. Statistics, which, however, are not strictly comparable show that the accident-frequency rate in all mining is currently about three times and the accident severity rate is about seven times as great as the average for general industrial work in the United States. Figures such as these are by no means comforting to mining men. They constitute a challenge to the industry that cannot be ignored.

It must be remembered that any type of mining is more hazardous than most or the other major occupations. …

Grouting And Freezing Unconsolidated And Water-Bearing Strata, Robert Walter Heins

Masters Theses

"The process of grouting has undergone many changes in recent years. A definition must, therefore, be inclusive. "Grouting" is the process of injecting, under pressure, into soil and rock through boreholes or other openings, any solution or suspension containing materials that harden, stiffen, or swell in void spaces to produce a solid or semi-solid impermeable mass. Various cements, chemicals, asphalts and clays are the materials used in the grouting process. The use of tailings is also considered a type of grouting, since some hardening or stiffening takes place. Cement grout relies on chemical reaction to bring about setting or hardening …

Magma 1949, Associated Students Of The Montana State School Of Mines.

Magma 1948-1997

No abstract provided.

Study Of Oil Well Squeeze Cementing Operations, Arthur Wellesley Walker

Professional Degree Theses

"A study of the literature and field operations indicates conclusively that squeeze cementing operations are performed almost exclusively as corrective measures in completing or working-over wells. The most common use is to correct for faulty cement operations during original well completions. Careful study of field operations indicate that in most cases formations are broken-down at pressures far less than that required to lift the overburden, and that large quantities of drilling mud and cement may be pumped into the well (and formations) at pressures less than that of the overburden. Analyses of the forces indicate that the formations will be …

Caving Procedure At The Crestmore Limestone Mine Of The Riverside Cement Company, Riverside County, Calif., Randall Helt Wightman

Professional Degree Theses

"The following paper describes current mining practices of the Riverside Cement Company at its Crestmore Mine, Riverside, California. For a number of years the Riverside Cement Company obtained its raw materials by surface quarry operations, but after these deposits were exhausted for equipment available at that time, the Company started underground mining. Mine workings were begun in 1927 to 1930 for the recovery of limestone by block-caving methods"--Introduction, page 1.

A Study Of The Power Consumption Of Mine Scrapers, Stanley Francis Johnsen

Masters Theses

"Since scrapers were first employed in underground mining work, numerous changes in scraper design have transpired until now there are several common types of scrapers in use in mines over the world. The proved models of scrapers have been developed over a period of more than fifty years. Although specific scrapers have been tested to determine the amount of power consumed, no literature could be found concerning the relative power consumption of the different types of scrapers when operated under identical conditions. Purpose of Problem - The purpose of this study is to determine the relative efficiency of different types …