Engineering Commons^™

The Influence Of Caprock On Blast Fragmentation Distribution, Matthew Kurtis Coy

Doctoral Dissertations

"This dissertation describes the development of a small-scale model of a caprock-laden quarry blast and discusses the results from that testing. The purpose of this testing was to provide insight into the reasons for poor caprock breakage during blasting.

Small-scale test blocks were poured using a weak mortar mix to represent a limestone formation at a small scale. A cold joint was created in the upper portion of the test specimens to represent the bedding plane that separates caprock and substrate layers in a caprock-laden limestone bench. The scale-model test blocks were blasted using detonating cord. The primary configuration for …

Fiber Bragg Grating Sensors For Mainstream Industrial Processes, Gary Allwood, Graham Wild, Steven Hinkley

Research outputs 2014 to 2021

This paper reviews fiber Bragg grating sensing technology with respect to its use in mainstream industrial process applications. A review of the various types of sensors that have been developed for industries such as power generation, water treatment and services, mining, and the oil and gas sector has been performed. A market overview is reported as well as a discussion of some of the factors limiting their penetration into these markets. Furthermore, the author’s make recommendations for future work that would potentially provide significant opportunity for the advancement of fiber Bragg grating sensor networks in these mainstream industries.

Modeling Dynamic Community Acceptance Of Mining Using Agent-Based Modeling, Mark Kofi Boateng

Doctoral Dissertations

"This research attempts to provide fundamental understanding into the relationship between perceived sustainability of mineral projects and community acceptance. The main objective is to apply agent-based modeling (ABM) and discrete choice modeling to understand changes in community acceptance over time due to changes in community demographics and perceptions. This objective focuses on: 1) formulating agent utility functions for ABM, based on discrete choice theory; 2) applying ABM to account for the effect of information diffusion on community acceptance; and 3) explaining the relationship between initial conditions, topology, and rate of interactions, on one hand, and community acceptance on the other …

Pillar Design For St. Peter Sandstone Formation, Francis Anohomah Arthur

Doctoral Dissertations

"Silica sands produced primarily from St. Peter Sandstone are used for hydraulic fracturing in the petroleum industry, glassmaking, chemicals, ceramics, filtration and the foundry industry in the US. The recent high demand for silica sands for hydraulic fracturing has triggered increased production and commissioning of new silica sand mines to support natural gas production from shale and tight gas deposits in the US. Most mines use surface mining methods to extract St. Peter Sandstone. The room and pillar mining method has been successfully used for St. Peter Sandstone mining in a few US locations, however, no one has proposed a …

Coal Combustion Products Utilization For Soil Amendment, Tran Thi Anh Tuyet

Chulalongkorn University Theses and Dissertations (Chula ETD)

Nowadays, coal has a crucial role in generating energy all over the world. As a result, the consumption of coal creates a huge amount of coal combustion products, including bottom ash and fly ash. The coal ash has the potential characteristics to become a resource material in agriculture such as its texture, water holding capacity, bulk density, pH etc., and contains almost all the essential plant nutrients. However, most of the coal ash created is dumped into the landfill, which is a contributing factor in the environmental degradation. This study wants to use coal ash in agriculture as a way …

Time Series Pattern Discovery Techniques For Well-To-Well Log Correlation, Chanchai Apiwatsakulchai

Chulalongkorn University Theses and Dissertations (Chula ETD)

Well log data is one of the most abundant data sources for subsurface characterization since almost all drilled wells are logged. Subsurface characterization requires correlated well log information. Processes to help perform well-to-well log correlation have been developed in this study based on the two approaches: pattern matching and pattern discovery. Pattern matching focuses on finding a known pattern of interest in uncorrelated wells. The use of Euclidean, Hamming, and Levenshtein distances in similarity measurement, Piecewise Aggregate Approximation (PAA), and Symbolic Aggregate approXimation (SAX) data representation helps create reduced-resolution while maintains the main characteristics of the signals. Multi-resolution analysis provides …

Quantitating Active Photosystem Ii Reaction Center Content From Fluorescence Induction Transients, Cole D. Murphy, Guangyan Ni, Gang Li, Audrey Barnett, Kui Xu, Jessica Grant-Burt, Justin D. Liefer, David J. Suggett, Douglas A. Campbell

Michigan Tech Publications, Part 1

Photosystem II (PSII) is a pigment-protein complex that photochemically extracts electrons from water, generating the reductant that supports biological productivity in all biomes. Estimating the content of active PSII reaction centers in a liquid sample is a key input for estimating aquatic photosynthesis rates, as well as for analyzing phytoplankton stress responses. Established procedures for PSII content quantification based on oxygen evolution are slow, imprecise and require dense cell suspensions, and are thus inapplicable to many laboratory or field studies. A new approach uses baseline chlorophyll fluorescence emission divided by the effective absorbance cross section for PSII photochemistry, with both …

Electromagnetic Signal Feedback Control For Proximity Detection Systems, Adam K. Smith

Dissertations, Master's Theses and Master's Reports

Coal is the most abundant fossil fuel in the United States and remains an essential source of energy. While more than half of coal production comes from surface mining, nearly twice as many workers are employed by underground operations.

One of the key pieces of equipment used in underground coal mining is the continuous mining machine. These large and powerful machines are operated in confined spaces by remote control. Since 1984, 40 mine workers in the U. S. have been killed when struck or pinned by a continuous mining machine. It is estimated that a majority of these accidents could …

A Novel Method For Sensorless Speed Detection Of Brushed Dc Motors, Ernesto Vazquez-Sanchez, Joseph Sottile, Jaime Gomez-Gil

Mining Engineering Faculty Publications

Many motor applications require accurate speed measurement. For brushed dc motors, speed can be measured with conventional observers or sensorless observers. Sensorless observers have the advantage of not requiring any external devices to be attached to the motor. Instead, voltage and/or current are measured and used to estimate the speed. The sensorless observers are usually divided into two groups: those based on the dynamic model, and those based on the ripple component. This paper proposes a method that measures the current of brushed dc motors and analyses the position of its spectral components. From these spectral components, the method estimates …

Explosion Testing Of A Polycarbonate Safe Haven Wall, Kyle A. Perry, Rex A. Meyr

Mining Engineering Faculty Research & Creative Works

The MINER Act of 2006 was enacted by MSHA following the major mining accidents and required every underground coal mine to install refuge areas to help prevent future fatalities of trapped miners in the event of a disaster where the miners cannot escape. A polycarbonate safe haven wall for use in underground coal mines as component of a complete system was designed and modeled using finite element modeling in ANSYS Explicit Dynamics to withstand the MSHA required 15 psi (103.4 kPa) blast loading spanning 200 milliseconds. The successful design was constructed at a uniform height in both half-width scale and …

Haul Truck Tires Recycling, Omkar Bhave

Chemical Engineering Undergraduate Honors Theses

The disposal of large Off-the-Road (OTR) tires is an increasingly important concern. These tires can weigh up to 8,450 pounds with an overall diameter and width of approximately 140.7 inches and 45.1 inches respectively. OTR tires are used for mining vehicles such as haul trucks, wheel loaders, backhoes, graders, and trenchers.[1] These new tires cost between $38,000 and $50,000 each, depending on multiple factors including oil prices and the cyclical nature of the industry. Haul trucks contain six tires per vehicle, and mines replace these tires around every 9-12 months.[2] Statistics regarding discarded OTR tires are not provided by the …

Ignimbrites To Batholiths, Chad Deering

TechTalks

Ignimbrites sample large magma reservoirs in the Earth’s upper crust, sometimes digging deep enough to link the volcanic realm with the plutonic world. Integrating textural, petrological, geochemical, and geochronological information on such deposits with geophysical signals suggest incremental growth and evolution of subvolcanic magma bodies that are dominated by high crystallinity mush zones, but sometimes remain sufficiently liquid to erupt. The eruptible upper portions are either extracted melt from the mush and constitute only a small volumetric fraction of the vertically extensive mushy batholithic magma body. The high-flux, ignimbrite flare-up phases are typically preceded by waxing magmatism that prime the …

Eveleth, Minnesota: A Portrait Of My Home Town, Judith I. Luna

Graduate Theses and Dissertations

This 30-minute documentary film provides snapshots of the small northeastern iron mining town of Eveleth, Minnesota, on the Mesabi Iron Range. It uses a two-pronged approach: 1) a first-person return to the town by the filmmaker almost 50 years after graduating from high school to see how the town may have changed, 2) a look at some historical and cultural factors which made the town what it was when the filmmaker was growing up and what continues to animate the town in the face of iron mining’s decline and rebirth. The latter include the immigrant experience and influence as the …

Diversity And Impacts Of Mining On The Non-Volant Small Mammal Communities Of Two Vegetation Types In The Brazilian Amazon, Natália Carneiro Ardente, Átilla Colombo Ferreguetti, Donald Gettinger, Pricila Leal, Ana Cristina Mendes-Oliveira, Fernanda Martins-Hatano, Helena Godoy Bergallo

Harold W. Manter Laboratory of Parasitology: Faculty Publications

The CarajaÂs National Forest contains some of the largest iron ore deposits in the world. The majority of the minerals are found below a plant community known as Savana Metalo fila, or ªCangaº, which represents only 3% of the landscape within the CarajaÂs National Forest (CNF). The aim of our study was to understand the diversity of community of non-volant small mammals in the two predominant vegetation types: Ombrophilous Forest and Canga, and to examine how mining impacts these communities. Sampling was conducted from January 2010 to August 2011 in 11 sampling sites divided by the total area of Canga …

Improving Global Detection Of Volcanic Eruptions Using The Ozone Monitoring Instrument (Omi), Verity Flower, Thomas Oommen, Simon Carn

Michigan Tech Publications, Part 1

Volcanic eruptions pose an ever-present threat to human populations around the globe, but many active volcanoes remain poorly monitored. In regions where ground-based monitoring is present the effects of volcanic eruptions can be moderated through observational alerts to both local populations and service providers, such as air traffic control. However, in regions where volcano monitoring is limited satellite-based remote sensing provides a global data source that can be utilised to provide near-real-time identification of volcanic activity. This paper details a volcanic plume detection method capable of identifying smaller eruptions than is currently feasible, which could potentially be incorporated into automated …

Utilizing Vegetation Indices As A Proxy To Characterize The Stability Of A Railway Embankment In A Permafrost Region, Priscilla Addison, Pasi T. Lautala, Thomas Oommen

Michigan Tech Publications, Part 1

Degrading permafrost conditions around the world are posing stability issues for infrastructure constructed on them. Railway lines have exceptionally low tolerances for differential settlements associated with permafrost degradation due to the potential for train derailments. Railway owners with tracks in permafrost regions therefore make it a priority to identify potential settlement locations so that proper maintenance or embankment stabilization measures can be applied to ensure smooth and safe operations. The extensive discontinuous permafrost zone along the Hudson Bay Railway (HBR) in Northern Manitoba, Canada, has been experiencing accelerated deterioration, resulting in differential settlements that necessitate continuous annual maintenance to avoid …

Global Ocean Particulate Organic Carbon Flux Merged With Satellite Parameters, Colleen B. Mouw, Audrey Barnett, Galen A. Mckinley, Lucas Gloege, Darren Pilcher

Michigan Tech Publications, Part 1

Particulate organic carbon (POC) flux estimated from POC concentration observations from sediment traps and 234 Th are compiled across the global ocean. The compilation includes six time series locations: CARIACO, K2, OSP, BATS, OFP, and HOT. Efficiency of the biological pump of carbon to the deep ocean depends largely on biologically mediated export of carbon from the surface ocean and its remineralization with depth; thus biologically related parameters able to be estimated from satellite observations were merged at the POC observation sites. Satellite parameters include net primary production, percent microplankton, sea surface temperature, photosynthetically active radiation, diffuse attenuation coefficient at …

Weights And Balances: Integrating Models For Prevention And Response To Southern California Offshore Oil Spills, Carmen Watts Clayton, Amoret Bunn

STAR Program Research Presentations

Licensing offshore oil and gas reserves in the United States waters are overseen by the U.S. Department of the Interior’s Bureau of Safety and Enforcement (BSEE). The licensing application includes planning for any worst-case oil spill scenario between BSEE and the applicant based on lessons learned from historic offshore spills such as the Deepwater Horizon (2010), Exxon Valdez (1989), and the Union Oil Platform Blowout (1969). The process for planning to respond to oil spills involves coordination with multiple agencies, trustees, and stakeholders to ensure that oil spill responses consider multiple factors, including ecologically sensitive species, commercial transportation and fisheries, …

A Protocol For Reclaiming In-Pit Tailings Ponds To Exceed Federal And State Regulations, John Seifert

Graduate Theses & Non-Theses

The goal of the protocol for reclaiming in-pit tailings ponds to exceed federal and state regulations was to develop a series of steps that can be followed to design, operate, and reclaim a tailings disposal pond that will develop into grazing land with a wetland for open pit sand mines in warm dry climates. By incorporating a wetland into the reclamation design, the post mining land use gives back to both the wildlife as a source of water as well as providing for a diverse range of post mining land use including but not limited to livestock grazing and ranch …

The Impact Of Satellite Sensor Viewing Geometry On Time-Series Analysis Of Volcanic Emissions, Verity Flower, Simon A. Carn, Robert Wright

Michigan Tech Publications, Part 1

Time-series analysis techniques are being increasingly used to process satellite observations of volcanic gas emissions and heat flux, with the aim of identifying cyclic behaviour that could inform hazard assessment or elucidate volcanic processes. However, it can be difficult to distinguish cyclic variations due to geophysical processes from those that are artefacts of the observation technique. Here, we conduct a comprehensive investigation into the origin of cyclicity in volcanic observations by analysing daily, global satellite measurements of volcanic SO2 loading by the Ozone Monitoring Instrument (OMI) and thermal infrared anomalies detected by the Moderate Resolution Imaging Spectroradiometer (MODIS). We use …

A Global Catalogue Of Large So < Inf> 2 Sources And Emissions Derived From The Ozone Monitoring Instrument, Vitali E. Fioletov, Chris A. Mclinden, Nickolay Krotkov, Can Li, Joanna Joiner, Nicolas Theys, S. Carn, Mike D. Moran

Michigan Tech Publications, Part 1

Sulfur dioxide (SO2) measurements from the Ozone Monitoring Instrument (OMI) satellite sensor processed with the new principal component analysis (PCA) algorithm were used to detect large point emission sources or clusters of sources. The total of 491 continuously emitting point sources releasing from about 30 kt yr-1 to more than 4000 kt yr-1 of SO2 per year have been identified and grouped by country and by primary source origin: volcanoes (76 sources); power plants (297); smelters (53); and sources related to the oil and gas industry (65). The sources were identified using different methods, including through OMI measurements themselves applied …

Modeling Of Geometric Change Influence On Blast-Wave Propagation In Underground Airways Using A 2d-Transient Euler Scheme, Liang Wang, Sisi Que, Jerry C. Tien, Nassib Aouad

Mining Engineering Faculty Research & Creative Works

The impact of methane explosions on mining operations can never be over-emphasized. The safety of miners could be threatened and local ventilation facilities are likely to be damaged by the flame and overpressure induced by a methane explosion event, making it essential to understand the destructiveness and influence range of a specific explosion. In this paper, the attenuation effect of geometric changes, most commonly bends, obstacles, and branches, present in the way of blast-wave propagation and the capability of the selected numerical model were studied. Although some relevant experimental research has been provided, quantitative analysis is insufficient. This paper investigates …

Post-Liquefaction Residual Strength Assessment Of The Las Palmas, Chile Tailings Failure, Tristan Reyes Gebhart

Master's Theses

Assessment of post-liquefaction residual strength is needed for the development of empirically-based, predictive correlations for earthquake engineering design. Previous practice commonly assigned negligible strengths to liquefied materials for engineering analysis, producing overly-conservative designs. Increasingly available case history data, and improved analytical tools have allowed for more accurate and less overly-conservative estimation of soil residual strength, improving empirical predictive models. This study provides a new case history to the limited suite of (approximately 30) liquefaction failure case histories available for post-liquefaction in-situ strength predictive correlations.

This case history documents the Las Palmas gold mine tailings dam failure, resulting from seismic-induced liquefaction …

The Lagging State Of Renewable Energy In Kentucky, John Evans

Mahurin Honors College Capstone Experience/Thesis Projects

It is evident that Kentucky's energy landscape is characterized primarily by coal and, to a lesser degree, natural gas and oil. It seems there's almost no room for renewable energy sources in Kentucky’s energy sector despite plentiful evidence of global climate change caused largely by carbon dioxide emissions from fossil fuels. Other states are paving the way in the renewable energy industry by investing in solar, wind and geothermal energy among other forms while Kentucky continues to sit back seemingly content with utilizing energy practices that are several decades old. In this project, I will be addressing reasons for the …

Stochastic Modeling And Dem Simulation Of Granular Media Subsidence Due To Underground Activity, Rodrigo Borela Valente

Open Access Theses

Many communities around the world have been established in areas of ongoing, as well as ceased, underground mining activity. Ground movements induced by ore extraction methods and the collapse of abandoned cavities have long been recognized as a hazard to surface structures. A number of approaches have been proposed for the prediction of subsidence in underground mining regions, and their integration to Geographic Information Systems (GIS) can produce a powerful risk management tool. Nevertheless, this application is often limited by either a lack of generality or excessive computational cost of the methods available.

In this work, the stochastic subsidence model …

Adjusting Particle-Size Distributions To Account For Aggregation In Tephra-Deposit Model Forecasts, Larry G. Mastin, Alexa R. Van Eaton, Adam J. Durant

Michigan Tech Publications, Part 1

Volcanic ash transport and dispersion (VATD) models are used to forecast tephra deposition during volcanic eruptions. Model accuracy is limited by the fact that fine-ash aggregates (clumps into clusters), thus altering patterns of deposition. In most models this is accounted for by ad hoc changes to model input, representing fine ash as aggregates with density ρagg, and a log-normal size distribution with median μagg and standard deviation σagg. Optimal values may vary between eruptions. To test the variance, we used the Ash3d tephra model to simulate four deposits: 18 May 1980 Mount St. Helens; 16-17 September 1992 Crater Peak (Mount …

Eliciting Drivers Of Community Perceptions Of Mining Projects Through Effective Community Engagement, Liang Wang, Kwame Awuah-Offei, Sisi Que, Wei Yang

Mining Engineering Faculty Research & Creative Works

Sustainable mining has received much attention in recent years as a consequence of the negative impacts of mining and public awareness. The aim of this paper is to provide mining companies guidance on improving the sustainability of their sites through effective community engagement based on recent advances in the literature. It begins with a review of the literature on sustainable development and its relationship to stakeholder engagement. It then uses the literature to determine the dominant factors that affect community perceptions of mining projects. These factors are classified into five categories: environmental, economic, social, governance and demographic factors. Then, we …

A Life Cycle Assessment Of A Uranium Mine In Namibia, Janine Lambert

USF Tampa Graduate Theses and Dissertations

Uranium mining and nuclear power is a controversial topic as of late, especially in light of the recent Fukushima event. Although the actual use of nuclear fuel has minimal environmental impact, its issues come at the very beginning and end of the fuel’s life cycle in both the mining and fuel disposal process. This paper focuses on a life cycle analysis (LCA) of uranium mine in the desert nation of Namibia in Southern Africa. The goal of this LCA is to evaluate the environmental effects of uranium mining. The LCA focuses on water and energy embodiment such that they can …

Developing The Greatest Blue Economy: Water Productivity, Fresh Water Depletion, And Virtual Water Trade In The Great Lakes Basin, A. L. Mayer, Stanley Mubako, Benjamin L. Ruddell

Michigan Tech Publications, Part 1

The Great Lakes basin hosts the world's most abundant surface fresh water reserve. Historically an industrial and natural resource powerhouse, the region has suffered economic stagnation in recent decades. Meanwhile, growing water resource scarcity around the world is creating pressure on water-intensive human activities. This situation creates the potential for the Great Lakes region to sustainably utilize its relative water wealth for economic benefit. We combine economic production and trade datasets with water consumption data and models of surface water depletion in the region. We find that, on average, the current economy does not create significant impacts on surface waters, …

Haul Truck Tires Recycling, Jessica N. Lizarazu

Chemical Engineering Undergraduate Honors Theses

The disposal of large Off-the-Road (OTR) tires is an increasingly important concern. These tires can weigh up to 8,450 pounds with an overall diameter and width of approximately 140.7 inches and 45.1 inches respectively. OTR tires are used for mining vehicles such as haul trucks, wheel loaders, backhoes, graders, and trenchers. These new tires cost between $38,000 and $50,000 each, depending on multiple factors including oil prices and the cyclical nature of the industry. Haul trucks contain six tires per vehicle, and mines replace these tires around every 9-12 months. Statistics regarding discarded OTR tires are not provided by the …