Engineering Commons^™

Utilization Of Biochar Coupled With Coal Combustion Products For Degraded Soil Amendment, Thidphavanh Sengsingkham

Chulalongkorn University Theses and Dissertations (Chula ETD)

Low Salinity Waterflooding (LSWF) has been intensively studied worldwide as it is a low-cost technique. By injecting water with very low salinity compared to formation water in the reservoir, the method changes equilibrium between rock surface, oil and surrounding water, causing wettability alteration through Multi-component Ion Exchange (MIE) mechanism. In this study, ammonium ion is added into low salinity water to facilitate the MIE mechanism in shaly-sandstones reservoir. Experiments are performed with shaly-sandstone rock as it contains both calcium and magnesium ions as part of clays and ammonium ion can express its potential by triggering MIE mechanism. Stirring test, spontaneous …

Hydrogeology And Water Management In The Arkwright Underground Coal Mine, Pittsburgh Seam, Northern West Virginia, Bryant D. Mountjoy

Graduate Theses, Dissertations, and Problem Reports (ETD)

Arkwright #1 is a closed underground mine in the Pittsburgh coal seam near Morgantown, West Virginia USA. Arkwright shares perimeter boundaries/barriers with three other closed Pittsburgh seam mines (Osage #3, Jordan #93, Federal #1) and is partially overlain by flooded Sewickley seam mines, 25 m above it. This mine is significant primarily because it manages and treats water diverted from nearly 20 other closed mines over a 600 square kilometer area. This study examines water levels, pump records, and mine maps to describe the hydrogeology of Arkwright Mine. After closure in 1995, Arkwright and the adjacent northern Osage mines began …

Exploring The Use Of A Time-Frequency Domain Technique For The Filtering Of Acoustic Emission/Microseismic Data, Charles Mborah, Maochen Ge, Zhigang Wang

Mining Engineering Faculty Research & Creative Works

The performance of acoustic emission/micro seismic (AE/MS) monitoring systems in mines is greatly impacted by background noise interference. Mine trucks/vehicles, fans, blasting and electrical spikes generate noise which negatively affect AE/MS signal quality. Using such datasets without filtering may lead to inaccurate determination of first arrivals and hence wrong source location. Also, data contaminated with noise makes manual identification and picking of the first arrivals impossible or difficult to achieve. This paper explored the use of stationary discrete wavelet transform as a filter to augment noise reduction on mine AE/MS data. The output of a test run on both noisy …

Shockwave Interaction With A Cylindrical Structure, Phillip R. Mulligan

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

An increased understanding of the shockwave interaction with a cylindrical structure is the foundation for developing a method to explosively seal a pipe similar to the Deepwater Horizon accident in the Gulf of Mexico. Shockwave interactions with a cylindrical structure have been a reoccurring focus of energetics research. Some of the most notable contributions of non-destructive tests are described in ``The Effects of Nuclear Weapons'' (Glasstone, 1962). The work presented by Glasstone examines shockwave interaction from a 20-megaton bomb with a cylindrical structure. However, the data is limited to a peak overpressure of less than 25 psi, requiring several miles …

Electrospinning: Polymer Nanofibre Adsorbent Applications For Metal Ion Removal, O. K. Pereao, C. Bode-Aluko, G. Ndayambaje, O. Fatoba, L. F. Petrik

Mining Engineering Faculty Research & Creative Works

In recent decades, electro spun nanofibers have been applied to different potential fields such as sensor devices, tissue engineering scaffolds, wound dressing, filtration, drug delivery, etc. and significant review papers have been published in these fields. However, the use of electro spun nanofibers in metal ion adsorption is emerging and comparatively innovative. Nanofiber materials hold great potential in advancing the growth of metallurgical technologies and progress for the separation of metallic ions from various sources. The Physico-chemical removal processes of adsorption use nanofibers due to their large surface area to volume ratio and the availability of a wide variety of …

Effect Of Explosive Charge Geometry On Shockwave Propagation, Catherine E. Johnson, Phillip R. Mulligan, Kelly Williams, Martin Langenderfer, Jeffrey Heniff

Mining Engineering Faculty Research & Creative Works

With advancements in the 3D printing of explosives, the understanding how the shape of an explosive charge influences the energy expansion and subsequently the focusing of energy is becoming increasingly more important. Theoretically, explosive charges could be printed to focus the energy on targets of interest or to synthesize nanomaterials. The first step to quantifying the energy expansion and shock wave convergences for a 3D printed charge is to examine simple geometries of traditional explosive charges (non-3D printed). Detonation of 15 PETN-based primasheet charges in the spherical, cubic, cylindrical, and tetrahedral configurations have been examined in this study. Qualitative data …

Crustal Thickness Beneath Libya And The Origin Of Partial Melt Beneath As Sawda Volcanic Province From Receiver Function Constraints, Awad A. Lemnifi, Abdelsalam Elshaafi, John Browning, Nassib Aouad, Saad K. El Ebaidi, Kelly K. Liu, Agust Gudmundsson

Mining Engineering Faculty Research & Creative Works

This study investigates crustal thickness and properties within the Libyan region. Results obtained from 15 seismic stations belonging to the Libyan Center for Remote Sensing and Space Science are reported, in addition to 3 seismic stations publically available, using receiver functions. The results show crustal thicknesses ranging from 24 km to 36 km (with uncertainties ranging between ±0.10 km and ±0.90 km). More specifically, crustal thickness ranges from 32 km to 36 km in the southern portion of the Libyan territory then becomes thinner, between 24 km and 30 km, in the coastal areas of Libya and thinnest, between 24 …

Time Effect Of Water Injection On The Mechanical Properties Of Coal And Its Application In Rockburst Prevention In Mining, Xiaofei Liu, Guang Xu, Chong Zhang, Biao Kong, Jifa Qian, Dong Zhu, Mingyao Wei

Mining Engineering Faculty Research & Creative Works

Coal seam water injection is widely used to prevent rockbursts in coal mines, and the duration of water injection is an important parameter related to the effectiveness of rockburst prevention, making it of practical importance to optimize the effective water injection duration. This paper presents the test results of the mechanical properties and pore structure of samples with different soaking time, obtained from a working face where rockburst occurred. Soaking time changes the mechanical properties of samples, and this time effect differs with the coal size (from centimeter to nanometer size). Results of numerical simulation and on-site tests in the …

Early Warning System For Shallow Landslides Using Rainfall Threshold And Slope Stability Analysis, Shruti Naidu, K. S. Sajinkumar, Thomas Oommen, V.J. Anuja, Rinu Samuel, C. Muraleedharan

Michigan Tech Publications, Part 1

A combined cluster and regression analysis were performed for the first time to identify rainfall threshold that triggers landslide events in Amboori, Kerala, India. Amboori is a tropical area that is highly vulnerable to landslides. The 2, 3, and 5-day antecedent rainfall data versus daily rainfall was clustered to identify a cluster of critical events that could potentially trigger landslides. Further, the cluster of critical events was utilized for regression analysis to develop the threshold equations. The 5-day antecedent (x-variable) vs. daily rainfall (y-variable) provided the best fit to the data with a threshold equation of …

Geopolitics Of Rare Earth Elements, Bert Chapman

Libraries Faculty and Staff Presentations

Rare earth elements (REE) contain unique chemical physical properties such as lanthamum, are found in small concentrations, need extensive precise properties to separate, and are critical components of modern technologies such as laser guidance systems, personal electronics such as IPhones, satellites, and military weapons systems as varied as Virginia-class fast attack submarines, DDG-51 Aegis destroyers, the F-35 Joint Strike Fighter, and precision guided munitions. The U.S. has some rare earth resources, but is heavily dependent on access to them from countries as varied as Afghanistan, Bolivia, and China. Losing access to these resources would have significant adverse economic, military, and …

Engineering Decision Making Under Uncertainties, Snehamoy Chatterjee

TechTalks

Uncertainty is an inherent component of any engineering problem. Uncertainty comes at different stages of an engineering project with different level of complexities. Decision making by neglecting uncertainty may leads to an incorrect solution for a project. Our research focuses on identification and quantification of different sources of uncertainness, and bringing uncertainties within the decision making framework. We are developing algorithms for uncertainty evaluation of spatial and temporal data by integrating multiple source and multiple scale data types, and stochastic optimization models to take into account multiple objectives and constraints. We are applying our research on mining, geology, and geo-hydrology …

Atmospheric Processes Affecting The Separation Of Volcanic Ash And So < Inf> 2 In Volcanic Eruptions: Inferences From The May 2011 Grímsvötn Eruption, Fred Prata, Mark Woodhouse, Herbert E. Huppert, Andrew Prata, Thor Thordarson, S. Carn

Michigan Tech Publications, Part 1

The separation of volcanic ash and sulfur dioxide (SO2) gas is sometimes observed during volcanic eruptions. The exact conditions under which separation occurs are not fully understood but the phenomenon is of importance because of the effects volcanic emissions have on aviation, on the environment, and on the earth's radiation balance. The eruption of Grímsvötn, a subglacial volcano under the Vatnajökull glacier in Iceland during 21-28 May 2011 produced one of the most spectacular examples of ash and SO2 separation, which led to errors in the forecasting of ash in the atmosphere over northern Europe. Satellite data from several sources …

Reference Data Set Of Volcanic Ash Physicochemical And Optical Properties, A. Vogel, S. Diplas, A. J. Durant, A. S. Azar, M. F. Sunding, William I. Rose, A. Sytchkova, C. Bonadonna, K. Krüger, A. Stohl

Department of Geological and Mining Engineering and Sciences Publications

Uncertainty in the physicochemical and optical properties of volcanic ash particles creates errors in the detection and modeling of volcanic ash clouds and in quantification of their potential impacts. In this study, we provide a data set that describes the physicochemical and optical properties of a representative selection of volcanic ash samples from nine different volcanic eruptions covering a wide range of silica contents (50–80 wt % SiO₂). We measured and calculated parameters describing the physical (size distribution, complex shape, and dense-rock equivalent mass density), chemical (bulk and surface composition), and optical (complex refractive index from ultraviolet to …

Degradation Of Bisphenol-A By Dielectric Barrier Discharge System: Influence Of Polyethylene Glycol Stabilized Nano Zero Valent Iron Particles, Jimoh O. Tijani, Massima E.S. Mouele, Ojo O. Fatoba, Omotola O. Babajide, Leslie F. Petrik

Mining Engineering Faculty Research & Creative Works

In this study we report the synthesis and catalytic properties of polyethylene glycol stabilized nano zero valent iron particles (PEG-nZVI) added to the dielectric barrier discharge (DBD) system to induce photo-Fenton process in the degradation of bisphenol A (BPA) in aqueous solution. The influence of operating parameters such as solution pH, initial concentration of the modelled pollutant and PEG-nZVI dosage on the extent of BPA degradation was investigated. The residual concentration of BPA and its intermediates were determined using high performance liquid chromatography (HPLC) and liquid chromatography mass spectrometry (LCMS). The high-resolution scanning electron microscope (HRSEM), x-ray diffraction (XRD), Brunauer-Emmett-Teller …

Dpm Dispersion Inside A Single Straight Entry Using Dynamic Mesh Model, Yi Zheng, Ying Li, Magesh Thiruvengadam, Hai Lan, Jerry C. Tien

Mining Engineering Faculty Research & Creative Works

Three-dimensional simulations of diesel particulate matter (DPM) distribution inside a single straight entry for the Load-Haul-Dump loader (LHD)-truck loading and truck hauling operations were conducted by using ANSYS FLUENT computational fluid dynamics software. The loading operation was performed for a fixed period of 3 min. The dynamic mesh technique in FLUENT was used to study the impact of truck motion on DPM distribution. The resultant DPM distributions are presented for the cases when the truck was driving upstream and downstream of the loading face. Interesting phenomena were revealed in the study including the piston effect, layering of DPM in the …

Effects Of Loading Rate On Gas Seepage And Temperature In Coal And Its Potential For Coal-Gas Disaster Early-Warning, Chong Zhang, Xiaofei Liu, Guang Xu, Xiaoran Wang

Mining Engineering Faculty Research & Creative Works

The seepage velocity and temperature externally manifest the changing structure, gas desorption and energy release that occurs in coal containing gas failure under loading. By using the system of coal containing gas failure under loading, this paper studies the law of seepage velocity and temperature under different loading rates and at 1.0 MPa confining pressure and 0.5 MPa gas pressure, and combined the on-site results of gas pressure and temperature. The results show that the stress directly affects the seepage velocity and temperature of coal containing gas, and the pressure and content of gas have the most sensitivity to mining …

Impact Of Coalbed Incidence Angle On Methane Enrichment Zone In Longwall Gob, Shengyong Hu, Ao Zhang, Guorui Feng, Shuwen Guan, Xiangqian Guo, Chao Li, Guang Xu

Mining Engineering Faculty Research & Creative Works

To control methane emissions in gob into longwall working faces, it is necessary to understand the distributions of methane enrichment zones (MEZ) around mined coal seams with different incidence angles. In this paper, FLAC^3D software is used to calculate the three-dimensional stress distributions in MEZ in gobs with coalbed incidence angles ranging from 0° to 50°. The results show that MEZ consistently exhibit a "hexagon" shape, and rotate in a clockwise direction as the coalbed angle increases. The MEZ range above the mined seam is larger than that below the mined seam. As the coalbed angle increases, the MEZ …

Degradation Of 2-Nitrophenol By Dielectric Barrier Discharge System: The Influence Of Carbon Doped Tio2 Photocatalyst Supported On Stainless Steel Mesh, J. O. Tijani, M. E.S. Mouele, T. C. Tottito, O. O. Fatoba, L. F. Petrik

Mining Engineering Faculty Research & Creative Works

This study investigated the degradation of 2-nitrophenol (2-NP) in aqueous solution by dielectric barrier discharge (DBD) system alone and its combination with supported TiO₂ photocatalysts. The TiO₂ photocatalyst supported on a stainless-steel mesh was synthesized using sol–gel solution of 8% polyacrylonitrile (PAN)/dimethylformamide/TiCl4 followed by pyrolysis in the furnace under N2 atmosphere at temperatures of 300, 350, or 400 °C for 3 h holding time. The supported catalysts were characterized for their morphologies, functional groups, crystallinity, surface areas and elemental chemical states by high resolution scanning electron microscope (HRSEM), Fourier transform infrared, X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) surface area, …

A Novel Applications Of Photogrammetry For Retaining Wall Assessment, Renee Oats, Rudiger Escobar-Wolf, Thomas Oommen

Michigan Tech Publications, Part 1

Retaining walls are critical geotechnical assets and their performance needs to be monitored in accordance to transportation asset management principles. Current practices for retaining wall monitoring consist mostly of qualitative approaches that provide limited engineering information or the methods include traditional geodetic surveying, which may provide high accuracy and reliability, but is costly and time-consuming. This study focuses on evaluating failure modes of a 2.43 m × 2.43 m retaining wall model using three-dimensional (3D) photogrammetry as a cost-effective quantitative alternative for retaining wall monitoring. As a remote sensing technique, photogrammetry integrates images collected from a camera and creates a …

Recovery Of Phosphate Minerals From Plant Tailings Using Direct Froth Flotation, Ashraf Alsafasfeh, Lana Z. Alagha

Mining Engineering Faculty Research & Creative Works

Wastes produced from the phosphate industry presents many challenges due to the high economic and environmental impacts involved with their disposal. However, the relative scarcity of high-grade phosphate ores has driven researchers to recover and recycle these valuable wastes (secondary sources). The goal of this study was to investigate the possibility of upgrading the P₂O₅ content in tailings produced from a phosphorous production plant using direct froth flotation. Characterization assays, including X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray fluorescence (XRF), and mineral liberation analysis (MLA), were first conducted to identify the mineralogical and morphological characteristics of …

Expanding Understanding Of Optical Variability In Lake Superior With A 4-Year Dataset, Colleen B. Mouw, Audrey B. Ciochetto, Brice Grunert, Angela W. Yu

Michigan Tech Publications, Part 1

Lake Superior is one of the largest freshwater lakes on our planet, but few optical observations have been made to allow for the development and validation of visible spectral satellite remote sensing products. The dataset described here focuses on coincidently observing inherent and apparent optical properties along with biogeochemical parameters. Specifically, we observe remote sensing reflectance, absorption, scattering, backscattering, attenuation, chlorophyll concentration, and suspended particulate matter over the ice-free months of 2013-2016. The dataset substantially increases the optical knowledge of the lake. In addition to visible spectral satellite algorithm development, the dataset is valuable for characterizing the variable light field, …

The Effect Of Conditioning On The Flotation Of Pyrrhotite In The Presence Of Chlorite, Yanfei Chen, Qing Shi, Qimeng Feng, Yiping Lu, Wencai Zhang

Mining Engineering Faculty Publications

The influence of conditioning on the flotation of pyrrhotite in the presence of chlorite was investigated through flotation tests, sedimentation tests, and X-ray photoelectron spectroscopy (XPS) analysis. The flotation results show that chlorite slimes dramatically impair the flotation of pyrrhotite. Sedimentation and flotation tests reveal that conditioning can effectively remove chlorite slimes from pyrrhotite surfaces, resulting in an enhanced flotation recovery of pyrrhotite. When mixed minerals were conditioned under the natural atmosphere, a faster conditioning speed and longer conditioning time decreased the flotation recovery of pyrrhotite. However, when mixed minerals were conditioned under a nitrogen atmosphere, a more intensive conditioning …

Comparing Distributed Acoustic Sensing To Three-Component Geophones In An Underground Mine, Nikolas Nesladek

Graduate Theses & Non-Theses

Geophones have become the industry standard for seismic data collection. However, a relatively new method is gaining popularity called Distributed Acoustic Sensing (DAS). DAS uses changes in backscattered light of a fiber-optic cable to detect strain from acoustic energy. The purpose of this project was to make a direct comparison between DAS and three component geophones, specifically in a mining setting. Experiments were done in the Underground Education Mining Center on the campus of Montana Tech. The sources used for this project were vertical sledgehammer shots, oriented shear sledgehammer shots, and blasting caps set off in both unstemmed and stemmed …

Synthesis, Characterization And Photocatalytic Activity Of Ag Metallic Particles Deposited Carbon-Doped Tio2 Nanocomposites Supported On Stainless Steel Mesh, J. O. Tijani, T. C. Totito, O. O. Fatoba, O. O. Babajide, L. F. Petrik

Mining Engineering Faculty Research & Creative Works

Abstract: In this present work, post deposition of metallic Ag nanoparticles on carbon-doped TiO₂ nanocomposites supported on stainless steel mesh was achieved via a combination of sol–gel and thermal evaporation techniques. Poly acrylonitrile dissolved in dimethyl formamide, and titanium tetra chloride was used as a carbon and titanium precursor, respectively. The photocatalytic activity of the prepared supported catalysts was evaluated by the degradation of an aqueous solution of methylene blue as a model pollutant under ultra-violet light irradiation. The prepared photocatalysts were characterized by several analytical techniques such as high resolution transmission electron microscopy, energy dispersive X-ray spectroscopy, Brunauer–Emmett–Teller …

Spatial Variability Of Co < Inf> 2 Uptake In Polygonal Tundra: Assessing Low-Frequency Disturbances In Eddy Covariance Flux Estimates, Norbert Pirk, Jakob Sievers, Jordan Mertes, Frans Jan W. Parmentier, Mikhail Mastepanov, Torben R. Christensen

Michigan Tech Publications, Part 1

The large spatial variability in Arctic tundra complicates the representative assessment of CO2 budgets. Accurate measurements of these heterogeneous landscapes are, however, essential to understanding their vulnerability to climate change. We surveyed a polygonal tundra lowland on Svalbard with an unmanned aerial vehicle (UAV) that mapped ice-wedge morphology to complement eddy covariance (EC) flux measurements of CO2. The analysis of spectral distributions showed that conventional EC methods do not accurately capture the turbulent CO2 exchange with a spatially heterogeneous surface that typically features small flux magnitudes. Nonlocal (low-frequency) flux contributions were especially pronounced during snowmelt and introduced a large bias …

Responsiveness Of Mining Community Acceptance Model To Key Parameter Changes, Mark Kofi Boateng, Kwame Awuah-Offei

Mining Engineering Faculty Research & Creative Works

The mining industry has difficulties predicting changes in the level of community acceptance of its projects over time. These changes are due to changes in the society and individual perceptions around these mines as a result of the mines' environmental and social impacts. Agent-based modeling can be used to facilitate better understanding of how community acceptance changes with changing mine environmental impacts. This work investigates the sensitivity of an agent-based model (ABM) for predicting changes in community acceptance of a mining project due to information diffusion to key input parameters. Specifically, this study investigates the responsiveness of the ABM to …

Surface-Modified Polyacrylonitrile Nanofibres As Supports, Chris Ademola Bode-Aluko, Omoniyi Pereao, Olanrewaju Fatoba, Leslie Petrik

Mining Engineering Faculty Research & Creative Works

Polyacrylonitrile nanofibers (PAN-nfs) are one of the most studied nanofibers because of their excellent characteristics, such as good mechanical strength, chemical resistance, and good thermal stability. Due to the easy dissolution in polar organic solvents, PAN-nfs are mostly produced via electrospinning technique. The electro spun PAN-nfs surfaces are relatively in-active and hydrophobic, and, therefore, hinder some potential applications; however, chemical surface modification reactions, such as amination, reduction, hydrolysis, and amidoximation, have been carried out on them. These reactions bring about functional groups, such as amine, hydroxyl, carboxylic, imine etc., to the surface PAN-nfs and invariably make their surfaces active and …

Flotation Behavior Of Complex Sulfide Ores In The Presence Of Biodegradable Polymeric Depressants, Muhammad Badar Hayat, Lana Z. Alagha, Syed Mohammad Sannan

Mining Engineering Faculty Research & Creative Works

In this study, chitosan polymer was tested as a potential selective green depressant of pyrite in the bulk flotation of galena (PbS) and chalcopyrite (CuFeS₂) from sphalerite (ZnS) and pyrite (FeS₂) using sodium isopropyl xanthate as a collector and 4-methyl-2-pentanol (MIBC) as a frother. Flotation tests were carried out in a D12-Denver flotation laboratory cell in the presence and absence of chitosan and/or sodium cyanide depressant which is commercially used as pyrite depressant in sulfide mineral flotation process. Flotation recoveries and concentrate grades (assay) were studied as a function of polymer concentration and flotation time. It …

Effect Of Single Dead End Entry Inclination On Dpm Plume Dispersion, Yi Zheng, Hai Lan, Magesh Thiruvengadam, Jerry C. Tien, Ying Li

Mining Engineering Faculty Research & Creative Works

Diesel particulate matter (DPM) is a by-product from operating diesel engines. Since diesel powers are one of the major sources of energy for mobile underground mining equipment, the adverse health effects of DPM are of a great concern. This paper used computational fluid dynamics (CFD) method to study the effect of entry inclination on DPM plume distribution in a dead-end entry. An upward mining face and a downward mining face were built with a truck and a loader in loading operation close to the face area. A species transport model with incorporated buoyancy effect was used to examine the DPM …

Tailings Dust Emissions, Emily Degner, Sam Horn, Zakary Galligan, Ryan Bernard, Julie Jameson, Josh Mueller, Natalie Tucker, Joe Griffin

Chemical Engineering Undergraduate Honors Theses

Fugitive dust emissions from the storage and handling of mine tailings presents environmental and safety concerns, which must be addressed to promote the land sustainability and the health and safety of individuals around a tailings storage facility (TSF). The investigated dust control methods were agglomeration, binder slurry injection, and topical spray.

The Dust Busters determined that pelletizing was the most practical method of agglomeration. In order to produce durable pellets from the mine tailings, which consist primarily of silica, a binder must be added. A variety of binders were considered including magnesium and calcium chloride, bentonite, barite, cement, vinyl polymers, …