Engineering Commons^™

Nanobubble Capillary Force Between Parallel Plates, Eric Bird, Zhi Liang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The Aggregation of Fine or Ultrafine Particles in Liquid Due to the Nanobubble (NB) Bridging Capillary Force is a Key Process for Many Industrial Applications. the Magnitude and Direction of the NB Capillary Force (NBCF) Are Directly Affected by the Geometry of the NB Gas Bridge between Two Adjoining Particles. Although the NBCF Can Be Accurately Measured using Experimental Techniques, It is Very Challenging to Monitor the Images of a NB Capillary Bridge in Nanoscale Spatial Resolution in NBCF Measuring Experiments. as a Result, the Capillary Force Model that Predicts the Dependence of the NBCF on the Geometry of the …

3d-Printed Gelatin-Alginate Hydrogel Dressings For Burn Wound Healing: A Comprehensive Study, Fateme Fayyazbakhsh, Michael J. Khayat, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Burn Wound Treatment is Still a Clinical Challenge Due to the Severity of Tissue Damage and Dehydration. among Various Wound Dressings, Hydrogel Materials Have Gained Significant Attention for Burn Wound Treatment in Clinical Practice Due to their Soothing and Moisturizing Activity. in This Study, 3D-Printed Dressings Were Fabricated using Clinically Relevant Hydrogels for Deep Partial-Thickness Burn (PTB) Wounds. Different Ratios of Gelatin and Alginate Mixture Were 3D-Printed and Examined in Terms of Rheological Behavior, Shear Thinning Behavior, Mechanical Properties, Degradation Rate, and Hydration Activity to Tune the Hydrogel Composition for Best Functionality. the Cell-Laden Dressings Were Bioprinted to Evaluate the …

Process Optimization For An Integrated Reverse Osmosis—Pressure Retarded Osmosis Pilot-Scale System Operated On Humboldt Bay, Ca, Galen O'Toole

Cal Poly Humboldt theses and projects

Pressure retarded osmosis (PRO) is an emerging osmotic power technology that could mitigate the major challenges faced by seawater reverse osmosis desalination (RO): brine disposal and high energy consumption. The primary focus of this paper is process optimization for a linked seawater reverse osmosis (RO) and pressure retarded osmosis (PRO) water purification system. PRO generates power by using osmosis to “pump” water through a membrane from low pressure and low concentration to high pressure and high concentration (RO brine). This commercial-scale pilot effort explores process optimization for pressure retarded osmosis as an industrial process rather than theoretical or experimental process. …

A Vacuum-Driven Distillation Technology Of Aqueous Solutions And Mixtures, Guo Guangyu

Dissertations

Distillation of aqueous solutions and aqueous mixtures has vast industrial applications, including desalination, wastewater treatment, and fruit juice concentration. Currently, two major distillation technologies are adopted in the industry, membrane separation and thermal distillation. However, both of them face certain inevitable drawbacks. Membrane separation has disadvantages as relying on high-grade energy, requiring membrane, fouling problem, narrow treatment range, limited scalability, and vibrating and noisy operating conditions. Traditional thermal distillation technologies can avoid above concerns but has other shortcomings, such as relatively low energy efficiency and yield rate, complicated and bulky system structure, and scaling problem.

This project proposes an innovative …

Electro-Chemo-Mechanics Of The Interfaces In 2d-3d Heterostructure Electrodes, Vidushi Sharma

Dissertations

Unique heterostructure electrodes comprising two-dimensional (2D) materials and bulk three dimensional (3D) high-performance active electrodes are recently synthesized and experimentally tested for their electrochemical performance in metal-ion batteries. Such electrodes exhibit long cycle life while they also retain high-capacity inherent to the active electrode. The role of 2D material is to provide a supportive mesh that allows buffer space for volume expansions upon ion intercalation in the active material and establishes a continuous electronic contact. Therefore, the binding strength between both materials is crucial for the success of such electrodes. Furthermore, battery cycles may bring about phase transformations in the …

Energy Planning Model Design For Forecasting The Final Energy Consumption Using Artificial Neural Networks, Haidy Eissa

Theses and Dissertations

“Energy Trilemma” has recently received an increasing concern among policy makers. The trilemma conceptual framework is based on three main dimensions: environmental sustainability, energy equity, and energy security. Energy security reflects a nation’s capability to meet current and future energy demand. Rational energy planning is thus a fundamental aspect to articulate energy policies. The energy system is huge and complex, accordingly in order to guarantee the availability of energy supply, it is necessary to implement strategies on the consumption side. Energy modeling is a tool that helps policy makers and researchers understand the fluctuations in the energy system. Over the …

Numerical Investigation On The Effect Of Spectral Radiative Heat Transfer Within An Ablative Material, Raghava S. C. Davuluri, Rui Fu, Kaveh A. Tagavi, Alexandre Martin

Mechanical Engineering Faculty Publications

The spectral radiative heat flux could impact the material response. In order to evaluate it, a coupling scheme between KATS - MR and P1 approximation model of radiation transfer equation (RTE) is constructed and used. A Band model is developed that divides the spectral domain into small bands of unequal widths. Two verification studies are conducted: one by comparing the simulation computed by the Band model with pure conduction results and the other by comparing with similar models of RTE. The comparative results from the verification studies indicate that the Band model is computationally efficient and can be used to …

Research Of Physical And Mechanical Properties Of Babbits Filled In Sliding Bearings, K G. Gaparov

Scientific-technical journal

The article presents the results of research of physical and mechanical properties of babbites prepared from scrap and wastes poured into sliding bearings. The development of the technology of recycling scrap and babbites waste is aimed at optimizing the parameters of the technology of cleaning and melting babbites for reuse of so-called secondary babbites.

Solution-Processed Flexible Broadband Zno Photodetector Modified By Ag Nanoparticles, N. P. Klochko, K. S. Klepikova, I. V. Khrypunova, V. R. Kopach, I. I. Tyukhov, S. I. Petrushenko, S. V. Dukarov, V. M. Sukhov, M. V. Kirichenko, A. L. Khrypunova

Faculty Research, Scholarly, and Creative Activity

In this work, we present flexible broadband photodetectors (PDs) fabricated by a deposition of nanostructured zinc oxide (ZnO) films on polyimide (PI) substrates by using cheap and scalable aqueous method Successive Ionic Layer Adsorption and Reaction (SILAR). In order to increase the long-wavelength absorption of the nanostructured ZnO layer, we created its intrinsic defects, including oxygen vacancies by post-treatment at 300 °C in vacuum and thus the light-sensitive material ZnO/PI was obtained. Then we applied silver nanoparticles (Ag NPs) from a silver sol onto a nanostructured ZnO film, which were visualized using SEM in the form of spheres up to …

Mathematical Model Of The Efficiency Of Investments Aimed In The Implementation Of Water-Saving Technologies

Irrigation and Melioration

In Uzbekistan, research work is being carried out aimed at improving the economic mechanisms for the introduction of water-saving technologies for irrigating agricultural crops. At the same time, the issues related to the analysis of the effectiveness of the use of water-saving technologies when irrigating cotton, the development of mathematical methods for assessing the effectiveness of investments, as well as their introduction into practice have not been sufficiently studied. This article provides a mathematical model of the efficiency of investments aimed at introducing water-saving technologies. The results of a numerical experiment of a mathematical model show that the introduction of …

Efficient Use Of Water Resources In The Basins Of Small Rivers, F. Gapparov, M.F. Gafforova

Irrigation and Melioration

The article provides a recommendation for the efficient use of water resources in the basins of small foothill rivers. The research was carried out on the example of the Govasay river basin located in the northern part of the Fergana Valley. The efficiency factor of the canal has been determined and a technical assessment has been given for the management of water resources in the river basin; the efficiency of the canal is 65-75%. A program for the operational management of water resources in The Govasay river basin and a GIS map of water consumers in the Govasay river basin …

Model Of Groundwater Level Control Using Horizontal Drainage, A. Arifjanov, M. Otaxonov, Z. Abdulkhaev

Irrigation and Melioration

The article describes the main factors affecting the rise in the level of groundwater in the city of Fergana and ways to eliminate them. Currently, in order to reduce the negative impact of rising groundwater levels on the environment, crops, buildings and structures, as well as underground utilities, it is proposed to design horizontal drainage in urban areas and a mathematical model has been developed for changing the groundwater level. For this, long-term data from observation wells were analyzed and the hydraulic parameters of horizontal drainage were selected taking into account the hydrogeology of the area. Taking into account the …

Results Of Proximate Analysis Of Energy Use Of Municipal Solid Waste, N.N. Abduganiev

Irrigation and Melioration

In the modern industrialized world, various raw materials are processed and used for human consumption. While some of the raw materials are converted into the desired product, the rest is thrown into the environment as waste. It is known that solid waste is a type of biomass that is formed in the course of human life. The article presents the results of a preliminary analysis of studies on the use of solid waste energy in the Urta-Chirchik district of the Tashkent region. Sorting results showed that the total volume of municipal solid waste in the district consists mainly of wood …

Shredding Of Cotton Stalks Under The Action Of Toothpicks In A Combined Unit, B. Khudayarov, U. Kuziev, B. Sarimsakov, М. Kholbutaev

Irrigation and Melioration

The article presents materials devoted to the justification of the parameters of the crown-wheel of the combined aggreagate. The technological process of work and the design of the working part, which is crushed by crushing cotton stalks, without breaking them, laying them on the movement of the unit, has been substantiated and developed. The optimal parameters of the crown-wheel and the tooth are determined by solving the regression equations that determine the optimal values of the vertical load on the teeth and its working quality. The results of theoretical and experimental research show that the amount of crushing of cotton …

Influence Of Electrophysical Methods On The Processes Of Root Formation Of Grapes, N.M. Markayev

Irrigation and Melioration

The article describes the possibilities of electrophysical processing before planting cuttings during vegetative cultivation of grape seedlings. The processes of root formation in cuttings using the electrophysical method in the article Acceleration of the process of root formation in cuttings of black raisins, treated at 71 V/m and an electric field strength of 15 hours, and an increase in the viability, quality, growth and survival of rooted seedlings up to 16.67-34% Presented the results of experiments on the increase and methods of electrotechnological processing of grape cuttings. The result of the study is the analysis and results of the processes …

Conditions, Criteria And Principles For Creating An Agri-Cultural Land Market In Uzbekistan, A.R. Nurnazarov

Irrigation and Melioration

The article analyzes the prerequisites for creating a market for agricultural land in the Republic of Uzbekistan, special attention is paid to land reform, land degradation (reduction of the bonitet score from 60 in 1991 to 50 or more at present, pasture degradation by 20-30%) and increase in economic from their use, the role of land rent in payments for land. 6 basic principles for creating a land market have been established and systematized, the relationship between X-rays and water in the irrigated farming zone, the role of the market in increasing the efficiency and effectiveness of the use of …

Economic Assessment Of The Effect Of Family Income On Students' Disciplines, Sh.A. Muratov

Irrigation and Melioration

The importance of higher education in scientific research, its role in poverty reduction and population growth has been studied theoretically. Also, when using the data of social surveys conducted by 538 respondents (students) studying in higher education institutions, they were awarded the Order of the logistics regulator in the economic assessment of the factors influencing the rate of mastery of disciplines. Factors influencing the acquisition of subjects by students: the main income of the family comes from non-farm (69,9 %), sex (52,2 %), studying at a higher education institution on a state grant (108,8 %), the student's course of study …

Innovative Rotor Casing And Leveling Apron For Combined Tillage Machine, A.A. Akhmetov, L.B. Muratov

Irrigation and Melioration

Investigations of the design of a combined machine equipped with an innovative casing and a leveler apron are presented, and the parameters of the leveler apron are substantiated. It was experimentally established that when the height of the drawing prism is exceeded by more than 200 mm, due to the falling of the crumbling part of the soil onto the rotor, the soil is thrown forward in the direction of the machine. Therefore, to eliminate soil waste, it is necessary either to reduce the height of the drag prism, or to increase the distance between the rotor and the leveling …

Ensuring The Uniformity Of Movement Of The Working Bodies Of The Machine For Processing Ridges In The Depth Of Travel, А. Tukhtakuziev, K.G. Abdulkhaev

Irrigation and Melioration

The article theoretically investigates the issue of identifying ways to ensure the deepening of the working bodies of the machine for processing ridges to a given processing depth and its required uniformity of stroke. The research results show that the deepening of the working bodies of the ridges processing machine to a given processing depth and its required uniformity is provided mainly due to the correct choice of the vertical distance from its reference plane to the lower connection points. The novelty of the conducted research lies in the fact that an analytical dependence has been obtained that allows us …

Develepment Of Land Market In Eastern European Countries And Experience For Uzbekistan, A.R. Nurnazarov

Irrigation and Melioration

The article examines the experience of the formation of the agricultural land market in Eastern European countries since the 90 s of the twentieth century, the problems and features of its devel-opment, the impact of the land market on the economies of countries. Particular attention is paid to the transformation of land ownership, methods of land privatization, land pricing, restrictions on land purchase, regulation of land relations in market conditions, issues of granting the right to pur-chase land to foreign individuals and legal entities, requirements for land owners for the presence of a special agricultural education or 3-5 years of …

The Developmet Of Competences Via Techniques For Enhancing Esp (English For Specific Purposes) Vocabulary Of Learners, G. Eshchanova

Irrigation and Melioration

In the article a recent trend in higher education is ESP (English for Specific Purposes) courses is discussed. These courses are designed around students’ needs based on their field of study. The goal is to strengthen students’ proficiency and help them to get ready to cope with everyday situations and deal with professionals in many fields such as: engineering, medicine, education and IT. There are many training sessions organized by international experts whose goal is to train local teachers to teach these courses successfully. In order to develop an ability to learn new vocabulary, for both general English and technical …

Development Of Girls’ Sports, A.R. Khodjanov, V.V. Mahmudov

Irrigation and Melioration

The article addresses current issues of higher education, taking into account its specifics. She has been providing appropriate advice on improving girls' physical well-being. The use of opportunities and qualities has an impact on the creation of comfortable conditions for female athletes. For girls involved in sports, the creation of impressive quality and possible conditions is considered. As a result, the girls-athletes of our institute took 2-3 places in the district and city qualifying rounds of chess, table tennis and won a ticket to the republican stage. At the republican stage, 2 female students of our team took 4th place …

The Imrovement Of Esp Teaching Via Methodical Provision At Technical Institution: Specializm-Oriented English Via Agriculture, G. Eshchanova, U. Nullaev

Irrigation and Melioration

In the given article the ways that ESP combines subject matter and English language teaching is discussed. This approach can be highly motivating for students because students are able to apply what they learn in their English classes to their main field of study, whether it be law, computing, business, tourism, etc. Being able to use the vocabulary and structures that they learn in a meaningful context reinforces what is taught and increases their motivation. Nevertheless, ESP concentrates more on language in context than on teaching grammar and language structures. Additionally, the ways of teaching English in ESL classes and …

Rapid Ac Electrokinetic Micromixer With Electrically Conductive Sidewalls, Fang Yang, Wei Zhao, Cuifang Kuang, Guiren Wang

Faculty Publications

We report a quasi T-channel electrokinetics-based micromixer with electrically conductive sidewalls, where the electric field is in the transverse direction of the flow and parallel to the conductivity gradient at the interface between two fluids to be mixed. Mixing results are first compared with another widely studied micromixer configuration, where electrodes are located at the inlet and outlet of the channel with electric field parallel to bulk flow direction but orthogonal to the conductivity gradient at the interface between the two fluids to be mixed. Faster mixing is achieved in the micromixer with conductive sidewalls. Effects of Re numbers, applied …

Evaluation Of The Thickness Of Vacuum Metal And Semiconductor Coatings Using Computer Programs, Bahrom Igamov, Ilkhom Bekpulatov, Aleksey Kamardin, Tulkun Kamilov, Ilhom Turapov, D Igamova

Technical science and innovation

Comparative studies of the thickness of coatings of such metals as Cu, Ag, Cr, Co, and also Mn4 Si7 on polished substrates made of Si, Si O2 / Si structure, ST - 50 glass ceramic, mica were carried out. The coatings were deposited in vacuum using thermal evaporation and magnetron sputtering. The thickness and uniformity of deposited coatings on rotating substrates are estimated by optical measurements and computer simulation. Mathematical models for the formation of coatings on flat substrates have been developed. The possibility of the optimal position of the substrate for the formation of functional coatings uniform in thickness …

Study Of The Thermodynamic Properties Absorbation Sulfur Storage Gas Of Zinc And Copper Industry, Berdiyarov Tilovkabulovich Berdiyarov Dr., Sh. T. Khojiev, S. T. Matkarimov, Sh. Munosibov

Technical science and innovation

The article considers the problems of utilization of industrial gases formed in the production of copper and ore containing sulfur anhydrides. Currently, the composition of process gases entering the gas purification department is approximately 6-7% SO₂, 0.2-0.3% SO₃ and other gases, until sulfuric acid is obtained from these gases, the sulfate is treated in a counter-scheme with 8% sulfate acid. The aim is to first reduce the temperature of the exhaust gases and second to avoid flying components such as as As, F, Se. As a result of the studies, the amount of SO₂ in the …

Analysis Of Multiple Degree-Of-Freedom Oscillatory Aquatic Propulsion, Seth Alan Brooks

Dissertations - ALL

Propulsive performance and flow field data were experimentally measured for a two degree-of-freedom fish platform. The fish platform was designed and constructed based on the yellowfin tuna (\textit{Thunnus albacares}) that is known to be both fast and efficient. This work extends the current understanding of oscillatory aquatic propulsion to a three-dimensional fish platform with full volume flow field data and propulsive performance. A parametric sweep of trailing-edge amplitude of the caudal fin ($A$), heave-to-pitch ratio ($h^*$), and phase offset between the two degrees-of-freedom ($\phi$) was used to explore a parameter space that encompasses and extends beyond the known biological domain. …

Exploiting Building Demand Flexibility Through Machine Learning For Building-To-Grid Integration, Hannah Charlene Fontenot

Dissertations - ALL

Demand flexibility – the ability to adjust a building's load profile across different timescales – is a key aspect of the ongoing effort to increase interconnectivity between buildings and the power grid. By harnessing their demand flexibility, buildings can provide significant benefits to the grid and bolster grid resilience and reliability. To facilitate the transition toward the "smart grid", new and intelligent control approaches are required that can seamlessly integrate building, occupant, and grid data and effectively control multiple building assets to provide grid services while maintaining occupants' required thermal comfort levels and reducing the building's overall energy consumption and …

Temperature-Immune Self-Referencing Fabry–Pérot Cavity Sensors, Hengky Chandrahalim, Jonathan W. Smith

AFIT Patents

A passive microscopic Fabry-Pérot Interferometer (FPI) sensor an optical fiber a three-dimensional microscopic optical structure formed on a cleaved tip of an optical fighter that reflects a light signal back through the optical fiber. The reflected light is altered by refractive index changes in the three-dimensional structure that is subject to at least one of: (i) thermal radiation; and (ii) volatile organic compounds.

Droplet-Based Fuel Property Measurements, Wanjun Dang

LSU Doctoral Dissertations

Ongoing work to find renewable biofuels to function as drop-in replacements or blending components with gasoline has identified a large number of fuel candidates. Given the vast number of potential biomass-derived fuel molecules and limited sample sizes, screening tools are required to down-select candidate fuels having desired physical properties to ensure good engine performance. This work investigates approaches for rapid screening of candidate fuels using micro-liter sample sizes targeting four properties -- surface tension, viscosity, heat of vaporization (HOV), and vapor pressure. Measurement techniques for fuel properties are developed based on unit phenomena for liquid fuel droplets including droplet oscillation …