Engineering Commons^™

Bbt Acoustic Alternative Top Bracing Cadd Data Set-Norev-2022jun28, Bill Hemphill

STEM Guitar Project’s BBT Acoustic Kit

This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are
(a) a one-piece base for the standard kit's (Martin-style) bracing,
(b) 277 Ladder-style bracing, and
(c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.

The CADD data set for each of the three (3) top bracing designs includes …

Thermal Analysis Of The Temperature Gradient Across Pintle Injector Face, Zoe Brand

Discovery Day - Prescott

Proper analysis of the temperature gradient across the pintle injector face is a complicated surface to acquire a reading from. Complications arise from the extreme temperatures seen on the combustion side mixed with the ambient temperatures seen on the fuel side of the injector. The orientation of temperature sensor placement is critical to mitigate hot spots and not disrupt the thermal flow through the injector face. The installment of the temperature sensors is also a critical issue since a new medium would need to be added to keep the sensor in place. The goal of this research is to figure …

Effects Of Equivalence Ratio During Shutdown Of A Rocket Engine On Hardware Longevity, Benjamin Black

Discovery Day - Prescott

During the shutdown or purge period after firing of a rocket engine it is critical to understand what equivalence ratios are desirable and implement a shutdown sequence so that the hardware is subjected to the lowest thermal and mechanical loading. Furthermore, it is essential that hazards to the test technicians caused by this method be minimized. The initial study was conducted into combustion mechanics, to understand how the reactants would ideally behave at varying equivalence ratios and in both pre-mixed and diffusion flame combustion. Using this foundation an analytical model for a Propane-Oxygen flame was created and tested using a …

Predicting Lattice Vibrational Frequencies Using Deep Graph Neural Networks, Nghia Nguyen, Steph-Yves V. Louis, Lai Wei, Kamal Choudhary, Ming Hu, Jianjun Hu

Faculty Publications

Lattice vibrational frequencies are related to many important materials properties such as thermal and electrical conductivity as well as superconductivity. However, computational calculation of vibrational frequencies using density functional theory methods is computationally too demanding for large number of samples in materials screening. Here we propose a deep graph neural network based algorithm for predicting crystal vibrational frequencies from crystal structures. Our algorithm addresses the variable dimension of vibrational frequency spectrum using the zero padding scheme. Benchmark studies on two data sets with 15,000 mixed-structure and 35,552 rhombohedra samples show that the aggregated R2 scores of the prediction reach …

Tip Driven Rotor System, Kevin Allyas

Discovery Day - Prescott

The Tip-Driven Rotor System (TDRS) Project is a product designed for KRyanCreative, LLC (KRC), as the basis of a Levitated Annular Rotor System (LARS) for commercial and tactical military vertical takeoff and landing (VTOL) vehicles. Conceptually, this design will greatly increase power density and lift capacity over conventional shaft-centric helicopters. The design also enables variable rotational velocity control that can greatly expand the VTOL flight envelope. The LARS innovatively leverages electromagnetism and superconductive levitation in the transfer of energy from vehicle source to aerodynamic lifting surface. The benefits of LARS include: the reduction of wing tip vortices due to a …

Open Innovation Trends, Issues And Policy Suggestions In Manufacturing Industry, Rongping Mu, Jingjing Guo, Jin Kang, Shuang Ma, Kangwei Chi

Bulletin of Chinese Academy of Sciences (Chinese Version)

At present, the new technology revolution and industrial transformation are accelerately reshaping the international industrial division of labor. It is urgent to adhere to the basic principles of "open cooperation, green and low carbon, value co-creation, and codevelopment", promote open innovation and cooperation in key areas of the manufacturing industry, and improve the open innovation and development capability in the manufacturing industry. This study first summarizes the open innovation trends of global manufacturing industries. Second, it analyzes major countries' policies in promoting open innovation in the manufacturing industry. Third, the current situation and problems of China's manufacturing open innovation is …

4d Printing Of Smart Hydrogel Scaffold To Program Neural Stem Cell Differentiation, Omar Khater

USF Tampa Graduate Theses and Dissertations

Injuries like Traumatic brain injuries (TBI) and Spinal cord injuries (CSI) areconsidered one of the biggest challenges in the medical sector as there is no specific treatment for these injuries and the medical intervention on these injuries is restricted to reducing the pain and removing the damaged human parts. One of the helpful and most effective treatment methods for these injuries involve neural tissue regeneration in the area of the injury. The main issue when trying to treat such injuries is that neural tissues are often unable to regenerate by themselves and require outer human intervention to differentiate. Biomedical scaffolds …

High-Throughput Computational Evaluation Of Lattice Thermal Conductivity Using An Optimized Slack Model, Guangzhao Qin, An Huang, Yinqiao Liu, Huimin Wang, Zhenzhen Qin, Xue Jiang, Jijun Zhao, Jianjun Hu, Ming Hu

Faculty Publications

High-throughput computational screening of materials with targeted thermal conductivity (κ) plays an important role in promoting the advancement of material design and enormous applications. The Slack model has been widely applied for the fast evaluation of κ with minimal time and resources, showing the potential capability of high-throughput screening of κ. However, after examining the Slack model on a large set of 353 materials, a huge discrepancy is found between the predicted κ and the correspondingly measured κ in experiments for some materials in addition to the generally overestimated κ by the Slack model. Thus, it is …

Impact Of Ultrathin Coating Layer On Lithium-Ion Intercalation Into Particles For Lithium-Ion Batteries, Yufang He, Hiep Pham, Xinhua Liang, Jonghyun Park

Chemical and Biochemical Engineering Faculty Research & Creative Works

Ultrathin film coatings on battery materials via atomic layer deposition (ALD) have been demonstrated as an efficient technology for battery performance enhancement. However, the fundamental understanding on lithium intercalation into active materials through the interface between the coating and active materials is unclear, which makes it difficult to optimize ALD coating strategies. Further, like most active materials, a coating layer can undergo volume change during the intercalation process, which can produce detrimental structural changes and mechanical failure of the layer. In this work, first-principles calculations are conducted to reveal the behavior of a coating layer on an active material particle …

Expanded-Range Venturi Flow Meter: Development And Testing Of A 3d-Printed Flow Meter And Solid-State Valve Concept, Joseph M. Pomo

Mechanical Engineering ETDs

In this thesis, I document the design, testing and performance of a novel Expanded-Range Venturi Flow Meter (ERVFM) concept. The ERVFM combines two, parallel-configured Venturi Flow Meters (VFM) with a Solid-State Selector Valve (SSSV). The goal was to create a reliable, high-turndown ratio flow meter which directs the fluid to either Venturi tube using the inherent pressure drop of the SSSV, and without moving parts. I constructed a pumped-fluid loop test-setup and quantified the ERVFM’s performance through pressure loss and mass flow rate measurements. In addition, I used python to develop models to assist in prototype design and data-processing. My …

Fiesta And Shock-Driven Flows, Brian E. Romero

Mechanical Engineering ETDs

In this study, the interaction of a shock with various gas and particle interfaces is analyzed through simulations using a new, GPU capable, multi-species flow solver, FIESTA (Fast, Interface Evolution, Shocks, and Transport in the Atmosphere), de- veloped for this research. The cases studied include the interaction between a shock and i) a two-dimensional (2D), circular cloud of a dense gas; ii) a 2D curtain of a dense gas; iii) a three-dimensional (3D) cylinder of a dense gas, and iv) a 3D curtain of solid particles.

In simulations of a 2D gas curtain and a 3D gas column, the curtain …

Machine Learning Approach For Classifying Power Outage In Secondary Electric Distribution Network, Stephan Mgaya, Hellen Maziku

Tanzania Journal of Engineering and Technology (TJET)

Power outage is the problem that hinders social and economic development especially for developing countries like Tanzania. Frequent power outages damage electric equipment, and negatively affect the industrial production process. Power outages cannot be completely eradicated due to uncontrolled cause like natural calamities but technical challenges can be managed and hence reducing power outages. The existing manual methods used to locate power outage like customer calls is inefficient and time consuming. On the other hand, modern method like the Advanced Metering Infrastructure (AMI) still faces a challenge in effectively classifying power line outage due to the nature of imbalanced datasets. …

Big Data Analytics Framework For Effective Higher Education Institutions, George Matto

Tanzania Journal of Engineering and Technology (TJET)

There has been an increased dependency on Information and Communication Technologies (ICTs) in undertaking various activities in Higher Education Institutions (HEIs) ecosystems. Because of that, huge volumes of data have increasingly been generated. There have been, for instance, considerable amounts of data generated through electronic platforms involved in students’ admission and registration process, students’ academic records management, teaching and learning data, curriculum related data, and several other administrative data. Analysis of data generated from these platforms stands to give students, lecturers, HEIs Management, policy makers and implementers, and other stakeholders useful insights that would help in improving HEIs’ effectiveness. Unfortunately, …

An Iot Based Worker Safety Helmet Using Cloud Computing Technology, Yuthriya Iddi Khamis, Mahmoud Alawi, Waheed Muhammad Sanya

Tanzania Journal of Engineering and Technology (TJET)

Miner safety and security is a major challenge around the world due to the exposure to toxic gases that are frequently released in underground mines. Miners' health is adversely affected primarily by toxic gases, which endanger the workers' lives. Furthermore, human sensory abilities do not detect these dangerous gases. As a result, this paper proposes a safety monitoring system that includes a temperature sensor, humidity sensor, and gas sensors to detect harmful gases and alert miners to those harmful gases using the smart helmet they wear. These gases are transmitted to the control station via the cloud using Internet of …

A Study Of Technology And Equipment For The Mineral Flotation Based On The Interfacial Micro/Nano Bubble Group, S Yang, S T. Matkarimov, D O. Yavkochiva, N S. Yuldasheva

Technical science and innovation

The purpose of this project is to strengthen the slurry mixing efficiency and improve the separation effect, reveal the heterogeneous bubble nucleation mechanism model on the mineral surface, clarify the merger mechanism of micro-nano bubbles at the adjacent interface and the evolution law of bubble groups, explore the hydrophobic coupling and regulation mechanism between micro-nano bubbles at the interface and the mineral surface, and open up a new path for the formation of efficient and environmental friendly flotation slurry mixing means.

Froth flotation is an important method for the beneficiation of copper ores, while the traditional stirring is limited in …

The Research Of The Influence Of The Composition Of Components On The Mechanical Properties Of Structural Polymer Wear-Resistant Materials From Thermosets, J H. Nafasov, U A. Ziyamukhamedova, G B. Miradullaeva

Technical science and innovation

This article presents the research results of effect of the composite material composition based on a thermos reactive binder using the Angren kaolin filler brand AKT-10. The composition possibilities optimizing and the composite material properties are considered for using in the lever brake system of railway transport using as modifying additives – soot containing waste from the Uz-Kor Gas Chemical production enterprise. The mechanical properties of composite materials were researched in order to use them for the manufacture of the “bushing” part used in the suspension of brake lever transmission of the railcar side frame.

Use Of Power-To-Gas Technology With An Excess Of Electricity In The Network, N A. Abdivakhidova

Technical science and innovation

Electricity-to-gas conversion is a key area of interest for decarbonizing and increasing the flexibility of energy systems, as it can both absorb renewable electricity during periods of excess supply and provide backup energy during periods of excess demand. By combining the power-to-gas conversion with the natural gas network, the inherent flexibility of the line package can be exploited and some of the power variability can be transferred to the gas network. Also, as long as the gas injected into the gas grid is low-carbon, such as hydrogen from renewables to gas, then the overall greenhouse gas emissions from the gas …

Classification Of Special Vehicles On The Basis Of Commodity Nomenklature Of Foreign Economic Activity, K M. Karimkulov, U R. Khamroev, G R. Khamroev

Technical science and innovation

This article classifies the types of special vehicles as a commodity due to various technical changes in the technical and specific parameters of special vehicles, insufficient accuracy of attachment and parameters of additional vehicles. detected.As a result of the growing demand for special vehicles, the attachment of additional parts (exterior and interior design changes) by manufacturing plants has led to the classification of this vehicle into another category.As a result of the analysis, we can see in the analysis that from January 1, 2019 to 2022, a total of 11 others (others) CN FEA on 8704 commodity groups imported 8364 …

Octopus-Inspired Adhesive Skins For Intelligent And Rapidly Switchable Underwater Adhesion, Sean T. Frey, A. B. M. Tahidul Haque, Ravi Tutika, Elizabeth V. Krotz, Chanhong Lee, Cole B. Haverkamp, Eric J. Markvicka, Michael D. Bartlett

Department of Mechanical and Materials Engineering: Faculty Publications

The octopus couples controllable adhesives with intricately embedded sensing, processing, and control to manipulate underwater objects. Current synthetic adhesive–based manipulators are typically manually operated without sensing or control and can be slow to activate and release adhesion, which limits system-level manipulation. Here, we couple switchable, octopus-inspired adhesives with embedded sensing, processing, and control for robust underwater manipulation. Adhesion strength is switched over 450× from the ON to OFF state in <50 ms over many cycles with an actively controlled membrane. Systematic design of adhesive geometry enables adherence to nonideal surfaces with low preload and independent control of adhesive strength and adhesive toughness for strong and reliable attachment and easy release. Our bio-inspired nervous system detects objects and autonomously triggers the switchable adhesives. This is implemented into a wearable glove where an array of adhesives and sensors creates a biomimetic adhesive skin to manipulate diverse underwater objects.

Optimised Adjoint Sensitivity Analysis Using Adjoint Guided Mesh Adaptivity Applied To Neutron Detector Response Calculations, Andrew G. Buchan, Dan Gabriel Cacuci, Steven Dargaville, Christopher C. Pain

Faculty Publications

This article presents a new approach for the efficient calculation of sensitivities in radiation dose estimates, subject to imprecisely known nuclear material cross-section data. The method is a combined application of adjoint-based models to perform, simultaneously, both the sensitivity calculation together with optimal adaptive mesh refinement. Adjoint-based sensitivity methods are known for their efficiency since they enable sensitivities of all parameters to be formed through only two solutions to the problem. However, the efficient solutions can also be obtained by their computation on optimal meshes, here guided by goal-based adjoint approaches. It is shown that both mesh adaptivity and sensitivity …

Statistical Shape Model (Ssm) Of Infant Femurs And The Relationship With Severity Of Hip Dysplasia, Tamara Chambers, Penny Atkins, Victor Huayamave, Andrew Anderson, Charles Price

PanaSoMM

The objective is to assess the morphology of infant femurs using a statistical shape model (SSM). The Ortolani collection is used in this study and consists of untreated infant cadaveric specimens with both healthy and dysplastic hips. Computed Tomography (CT) scans of 4 of the 14 specimens in the collection were taken at the University of Padua. Manual and semi-automatic segmentation techniques were used to reconstruct the 2D slices of femurs and generate 3D surface models. The SSM model of the infant femurs will be developed using an open-source software called ShapeWorks developed by the University of Utah. The SSM …

Introducing Modeling To First-Year Engineering Students For Effective Implementation In The Engineering Design Process, Carolina Barriento, Juan F. Granizo

PanaSoMM

Introducing Modeling to First-Year Engineering Students for Effective Implementation in the Engineering Design Process

Carolina Barriento and Juan Francisco Granizo

Embry-Riddle Aeronautical University

Abstract

Modeling and Simulation are fundamental skills for all engineering students [1]. However, students are usually introduced to these concepts during their junior or even as late as their senior year. Our research aims at familiarizing students with Modeling and Simulation tools in their first year of engineering studies. We consider the fact that proper learning involves using long-term memory (in contrast with working memory) and this is accomplished by the gradual introduction and practice of the …

A Pilot Study On The Nanoscale Properties Of Bone Tissue Near Lacunae In Fracturing Women, Wen Qian, Roman Schmidt, Joseph A. Turner, Sue P. Bare, Joan M. Lappe, Robert R. Recker, Mohammed P. Akhter

Department of Mechanical and Materials Engineering: Faculty Publications

The goal of this study is to investigate the causes of osteoporosis-related skeletal fragility in postmenopausal women. We hypothesize that bone fragility in these individuals is largely due to mineral, and/or intrinsic material properties in the osteocyte lacunar/peri-lacunar regions of bone tissue. Innovative measurements with nanoscale resolution, including scanning electron microscope (SEM), an atomic force microscope that is integrated with infrared spectroscopy (AFM-IR), and nanoindentation, were used to characterize osteocyte lacunar and peri-lacunar properties in bone biopsies from fracturing (Cases) and matched (Age, BMD), non-fracturing (Controls) postmenopausal healthy women. In the peri-lacunar space, the nanoindentation results show that the modulus …

Control And Planning For Mobile Manipulators Used In Large Scale Manufacturing Processes, Joshua T. Nguyen

LSU Master's Theses

Sanding operations in industry is one of the few manufacturing tasks that has yet to achieve automation. Sanding tasks require skilled operators that have developed a sense of when a work piece is sufficiently sanded. In order to achieve automation in sanding with robotic systems, this developed sense, or intelligence, that human operators have needs to be understood and implemented in order to achieve, at the minimum, the same quality of work. The system will also need to have the equivalent reach of a human operator and not be constrained to a single, small workspace. This thesis developed solutions for …

Investigating The Performance Of A Novel Multi-Element Airfoil Concept Using Numerical Analysis, Ahmed Elbaz

Mechanical Engineering

Separation control is one of the trending topics recently for Vertical Axis Wind Turbine (VAWT) applications, flow separation that occur on the suction side of an airfoil is a major limitation for VAWTs starting and power coefficient; passive control of flow separation has been attracting wind energy research community recently. The principle objective of this paper is to investigate the effect of the multi-element airfoil on the aerodynamic characteristics at wide range of angles of attack at a Reynolds number of 140,000. The multi element airfoil modification has been implemented by replacing the baseline airfoil with two airfoil members within …

Predictive Thermal Modeling And Characterization Of Ultrasonic Consolidation Process For Thermoplastic Composites, Madeline Kirby

LSU Master's Theses

Ultrasonic consolidation (USC) of thermoplastic composites (TPCs) is a highly attractive and promising method to manufacture high-performance composites. This work focuses on USC of dry carbon fiber (CF) fabrics with high-temperature polyphenylene sulfide (PPS) films. Experimental trials to assess feasibility of the process are time-consuming. Consequently, a predictive thermal model would facilitate process parameters selection to reduce expensive trial-and-error approaches. This paper presents a 2D finite element model of samples under consolidation, incorporating equations for viscoelastic heating, matrix phase change, and material properties. Theoretical temperature profiles for nodes of interest were compared to the corresponding experimental temperature curves for various …

A Comparative Study On Representativeness And Stochastic Efficacy Of Miniature Tensile Specimen Testing, Sreekar Karnati, Sriram Praneeth Isanaka, Yunlu Zhang, Frank W. Liou, Jason L. Schulthess

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this article, a miniature dog bone tensile coupon design was tested against the existing ASTM standard specimen design. Specimens were prepared from commercially sourced austenitic stainless steel 304 alloy, and a defect-ridden additively manufactured 304L alloy was studied. By utilizing a tensile specimen design that is 1/230th volume of the smallest ASTM E8-04 (2016), Standard Test Methods for Tension Testing of Metallic Materials, dog bone specimen, coupled to a digital image correlation (DIC) setup, case studies were performed to compare tensile property measurements and strain field evolution. Whereas yield strength measurements were observed to be similar, post-yield, the ultimate …

Tunable Passive Shock And Vibration Isolators For Rotational Isolation, Chase B. Lemaire

LSU Master's Theses

Shock and vibration isolation are a critical need in helmets, which are widely used to protect athletes, workers, soldiers, and astronauts. Passive vibration isolation systems are a good option when mass and volume should be minimized and when the experienced loadings can be predicted. However, it is frequently challenging to find materials and structures which exhibit the optimal vibration and impact isolation properties for an application. As a case study illustrating a novel design paradigm for rotational shock absorption, a family of optimal solutions for the physical properties of American football helmets is presented. Lumped parameter Simulink models simulate a …

Microfluidic Device For Localized Electroporation, Justin Brooks, Arian Jaberi, Ruiguo Yang

Department of Mechanical and Materials Engineering: Faculty Publications

Electroporation is a common method of transfection due to its relatively low risk and high transfection efficiency. The most common method of electroporation is bulk electroporation which is easily performed on large quantities of cells yet results in variable levels of viability and transfection efficiency across the population. Localized electroporation is an alternative that can be administered on a similar scale but results in much more consistent with higher quality transfection and higher cell viability. This paper discusses the creation and use of a simple and cost-effective device using porous membrane for performing localized electroporation.

Phase Space Analysis Of Nonlinear Wave Propagation In A Bistable Mechanical Metamaterial With A Defect, Mohammed A. Mohammed, Piyush Grover

Department of Mechanical and Materials Engineering: Faculty Publications

We study the dynamics of solitary waves traveling in a one-dimensional chain of bistable elements in the presence of a local inhomogeneity (`defect'). Numerical simulations reveal that depending upon its initial speed, an incoming solitary wave can get transmitted, captured or reflected upon interaction with the defect. The dynamics are dominated by energy exchange between the wave and a breather mode localized at the defect. We derive a reduced-order two degree of freedom Hamiltonian model for wave-breather interaction, and analyze it using dynamical systems techniques. Lobe dynamics analysis reveals the fine structure of phase space that leads to the complicated …