Engineering Commons^™

Desirable Combinations Of Electrode And Flux For Submerged Arc Welding Of Low Carbon Steel, James A. Husmann

Graduate Research Papers

The major purpose of this study was to provide information about desirable combinations of welding electrode and appropriate fluxes for submerged arc welding of low carbon steel. Other purposes were to:

1. Test a variety of combinations of available submerged arc welding electrodes and fluxes in welding low carbon steel.

a. Prepare specimens for tensile tests.

b. Conduct tensile tests.

c. Calculate tensile strength, yield point, break point, percent of elongation, and percent reduction of area.

2. Determine the most desirable combinations of electrode and flux for companies presently using or planning to use submerged arc welding for low carbon …

A Computerized Manpower Reporting System For Staff Departments Of A Manufacturing Organization, Laurence C. Oliver

Graduate Research Papers

The purposes of this study were to develop and implement a computerized reporting system that would meet the following criteria:

1. Be capable of handling the reporting needs of the entire industrial engineering department.

2. Produce accurate reports.

3. Be simple to use and maintain.

4. Be flexible, so that new reports could be included.

5. Be adaptable to any industrial engineering or staff department.

Interaction Of A Two-Dimensional Transverse Jet With A Supersonic Mainstream, Gilbert Otto Kraemer

Mechanical & Aerospace Engineering Theses & Dissertations

A experimental investigation of the interaction of a twodimensional sonic jet injected transversely into a confined main flow has been conducted. The main flow consisted of air at a Mach number of 2.9. The effects of varying the jet parameters on the flow field were examined using surface pressure and composition data. Also, the downstream flow field was examined using static pressure, pitot pressure, and composition profile data. The jet parameters varied were gapwidth, jet static pressure, and injectant species of either helium or nitrogen. The values of the jet parameters used were 0.039, 0.056,and 0.109 cm for the gapwidth …

Application Of Least-Squares Method To The Determination Of Orthotropic Elastic And Photoelastic Constants, R. G. Chermahini

Mechanical & Aerospace Engineering Theses & Dissertations

A least-squares technique is developed in matrix form to determine orthotropic elastic and photoelastic constants. Orthotropic elastic constants are determined by mounting strain gages on a half-plane specimen which is subjected to a compressive concentrated force. Strain values corresponding to a 1000 lb load and coordinates of the points where the gages are located are used as input data to the governing equation of orthotropic elasticity for the model under consideration. Orthotropic photoelastic constants are determined using a transparent composite half-plane model which is subjected to a concentrated load. Photoelastic constants are determined using the coordinates of selected point on …

Calculation Of Potential Flow Past Non-Lifting Bodies At Angle Of Attack Using Axial And Surface Singularity Methods, Jin-Yea Shu

Mechanical & Aerospace Engineering Theses & Dissertations

Two different singularity methods have been utilized to calculate the potential flow past a three dimensional non-lifting body. Two separate FORTRAN computer programs have been developed to implement these theoretical models, which will in the future allow inclusion of the fuselage effect in a pair of existing subcritical wing design computer programs.

The first method uses higher order axial singularity distributions to model axisymmetric bodies of revolution in an either axial or inclined uniform potential flow. Use of inset of the singularity line away from the body for blunt noses, and cosine-type element distributions have been applied to obtain the …

Test 1444: Yanmar Ym336d And Ym336 Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1443: Yanmar Ym276d And Ym276 Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1442: Yanmar Ym226d And Ym226 Diesel 9-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1439: International 3488 Hydro Diesel Hydrostatic, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1438: International 3288 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

The Design, Construction, And Evaluation Of A Thermosiphon Solar Water Heater, James R. Coughlin, Mark R. Bender

Mechanical Engineering

The purpose of this senior project was to design, construct and evaluate a thermosiphon solar water heater. The project was to be used as a department demonstration of a passive solar water heating system. Overall maximum dimensions of the system needed to be maintained to insure the system's transportability through doors and corridors.

Crimp-Type Electrical Connectors, Ted Lai-Che Kuo

Dissertations

Three types of surface conditions (plain surface, plain surface with oxidation inhibitor, and toothed surface) and four types of environmental gases (air, nitrogen, hydrogen, and oxygen) were used to study the performance of electrical connectors installed on aluminum conductors. All of the connectors were placed insealed vessels which allowed the desired type of gas to flow at a steady rate. The connectors were then current cycled.

For the connections prepared with plain surfaces, the connectors deteriorated equally fast in air, nitrogen and hydrogen. Only the connectorsexposed to oxygen showed a higher deterioration rate than the others.

Connections prepared withhaving plain …

Test 1440: International 3688 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1441: International 5488 Diesel 18-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Investigation Of Blood Pressure Measurement Using A Hydraulic Occlusive Cuff, Kusha R. Bhattarai

Dissertations and Theses

This thesis presents an improved oscillotonometric system for the measurement of human blood pressure. The study included:

1. The design of a hydraulic occlusive cuff,

2. The investigation of the wave forms taken from the blood pressure measurements, and

3. The design of a mechanism for the simulation of human blood pressure pulse.

In this study, an experimental system consisting of a rigid shell occlusive cuff, a constant volume displacement pump, a transducer, and a chart recorder was designed and used for data collection.

Test 1437: John Deere 1250 Diesel 9-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1435: John Deere 8650 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1436: John Deere 8450 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1434: John Deere 8850 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Photovoltaic Cells: Common Power Source For Tomorrow?, Florida Solar Energy Center, Arthur Litka

FSEC Energy Research Center®

The word "photovoltaic" combines the scientific terms "photo", meaning light, and "voltaic", meaning voltage. Together, the terms mean voltage generated by light energy. Specially treated silicon, or another substance, is manufactured in such a way that when light strikes it electricity is produced. The cells have no moving parts, and they are durable. They are commonly called solar cells.

Test 1432: Ford 7610 And 7710 (16x4) Diesel 8 And 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1431: Ford 6610 And 6710 (16x8) Diesel 8 And 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1433: Ford 7710 And 7610 (16x8) Diesel 8 And 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1430: Ford 6610 And 6710 (16x4) Diesel 8 And 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Improved Finite Element Methodology For Integrated Thermal-Structural Analysis, Pramote Dechaumphai

Mechanical & Aerospace Engineering Theses & Dissertations

An integrated thermal-structural finite element approach for efficient coupling of thermal and structural analysis is presented. New thermal finite elements which yield exact nodal and element temperatures for one-dimensional linear steady-state heat transfer problems are developed. A nodeless variable formulation is used to establish improved thermal finite elements for one-dimensional nonlinear transient and two-dimensional linear transient heat transfer problems. The thermal finite elements provide detailed temperature distributions without using additional element nodes and permit a common discretization with lower order congruent structural finite elements. The accuracy of the integrated approach is evaluated by comparisons with analytical solutions and conventional finite …

Experimental Investigation Of A Direct Expansion Solar-Assisted Heat Pump, James Yau-Jwo Shen

Mechanical & Aerospace Engineering Theses & Dissertations

A direct expansion solar-assisted heat pump, which uses economical bare solar collectors as evaporator, is designed and operated. The experimental results indicate that marked improvement in thermal performance results if the collector/ evaporator temperature is maintained at o0c to 10°c above the ambient temperature. During the course of this investigation, the system thermal performance is determined under various ambient and operating conditions by measuring the incident solar energy flux, refrigerant flow rate, temperature and pressure at various locations in the system. The heat pump coefficient of thermal performance and solar collector efficiency ranging from 2.0 to 3.0 and 40% to …

Test 1429: Ford 5610 (16x8) Diesel 8 And 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1452: Steiger Couger Iii St-250 Diesel (S/N 104-00331 And Up) Also Steiger Couger Iv Cm-250 Diesel 20-Speeds, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Inversion To Obtain Aerosol Size Distributions From Measurements With A Differential Mobility Analyzer, Darryl J. Alofs, P. Balakumar

Mechanical and Aerospace Engineering Faculty Research & Creative Works

To Measure Size Distributions of Sub micrometer Aerosols with an Electrical Differential Mobility Analyzer (DMA) Requires an Inversion Procedure. the Knutson (1976) and the Hoppel (1978) Inversion Procedures Were Numerically Investigated for the Case of Log-Normal Aerosol Size Distributions. It Was Found that the Hoppel Procedure Converges to the Same Result as that Given by the Knutson Procedure. the Computational Range for Geometric Mean Diameter (Χ_g) Was 0.025-0.25 Μm, and for Geometric Standard Deviation (Σ_g) Was 1.1-2.4. the Inversion Error Was Found to Be Greater Than 10% in Certain "Forbidden Zones" of Χ_g and Σ …

Test 1422: Ford 3610 (8x2) Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …