Engineering Commons^™

Design Of A Semi-Continuous Bio-Oil Upgradation Process Using Iron/Bone-Char Catalysts, Kelli Thomas

Graduate Theses & Non-Theses

• 07Bio-oil is a pyrolysis byproduct that consists of heavily oxygenated organic fractions with low caloric values. There are very few industrial-sized facilities that can process bio-oil into useful hydrocarbons comparable to petroleum products. With the increase in biochar production for remediation efforts and forest clean-up, there is a demand for portable, small-scale refineries that do not require extensive process and safety equipment to convert byproducts into usable fuels. Refining bio-oil via atmospheric hydrodeoxygenation (HDO), the removal of the oxygenated functional groups under an unpressurized hydrogenated atmosphere, results in the upgradation of the heavy hydrocarbons within the bio-oil. This process is …

Mechanical Characterization Of Polymer Composites Embedded With Aramid Nanofiber, Evan Griffiths

Graduate Theses & Non-Theses

Self-healing materials are repairable and extend product lifetimes but are limited in application due to their mechanical properties such as low yield strength. Here, the mechanical properties of an elastomeric polymer composite containing aramid nanofiber are examined. These studies provided an economically feasible foundation to understand the doping concentration and resultant mechanical properties that would result should aramid nanofibers be used to reinforce a self-healing polymer that requires complex synthesis methods and expensive reactants. The elastomeric polymer used was polycaprolactone containing various weight percent aramid nanofiber. Quasi-static mechanical testing of these samples was performed following ASTM standardized tests for tension, …

Boiling Crisis Is A Consequence Of Thermal Runaway In The Substrate Due To Degradation Of Nucleate Boiling Heat Transfer, Manohar Bongarala, Justin A. Weibel, Suresh V. Garimella

CTRC Research Publications

Chaotic bubble interactions during vigorous boiling have foiled attempts at an accurate mechanistic understanding of this important industrial transport process. Prediction of the boiling crisis (dryout) that occurs due to the spontaneous merger of bubbles into an insulating vapor film at critical heat flux remains an unsolved challenge. This work diagnoses the dryout process using synchronized high-resolution spatiotemporal heat flux and phase data, obtained via through-substrate infrared and visual inspection. We examine prevailing theories for the boiling crisis and provide evidence to rule out all but one. The boiling crisis is found to be a consequence of a peak in …

The Shoulder Effect In The Stagnation Zone For Temperature-Controlled Jet Impingement Transition Boiling Of Submerged Dielectric Fluid, Tyler P. Stamps, Justin A. Weibel

CTRC Research Publications

Two-phase jet impingement is capable of high heat transfer coefficients and high boiling critical heat flux (CHF) limits, making it a suitable technology for electronics immersion cooling applications. Previous studies have focused on the heat-flux-controlled nucleate boiling performance of an impingement jet up to the CHF. Exploration of other boiling regimes that occur under temperature-controlled surfaces is of equal fundamental importance. It has been shown for free jets that a high and consistent heat flux can be dissipated over a wide range of surface superheats in the transition boiling regime when the surface is temperature-controlled. This so-called “shoulder effect”, or …

Development And 3d Printing Of Glass Fiber And Carbon Fiber Reinforced Shape Memory Polymer Composites For Structural Applications., Krishna Sai Aparna Munjuluri

Electronic Theses and Dissertations

This study aims at the development of shape memory polymer composites with two types of reinforcements, milled glass fibers, and chopped carbon fibers, for potential structural applications in aircraft and automotive industries. Glass fiber-SMP composites were made at fiber loading wt.% of 0%, 5%, 10%, and 20%. In contrast, carbon fiber-SMP composites were made at fiber loading wt.% of 0%, 5%, 10% and 15%. The feedstocks were extruded into filaments and characterized by their physical, rheological, chemical properties and morphologies. Fused Filament Fabrication 3D printing was used to manufacture specimens for mechanical testing of hardness and flexural properties. The findings …

Natural Fiber Reinforced Composites For Sustainable Additive Manufacturing., Athira Nair Surendran

Electronic Theses and Dissertations

Carbon fiber is widely known for its exceptional strength, making it a sought-after material in composite manufacturing, especially with thermosets and thermoplastics. Its major applications span aerospace, wind turbines, sports equipment, automotive interior and exterior parts, robotics and medical equipment. Recently, carbon fiber filament manufacturing has gained attention due to the availability of desktop 3D printers and the versatility and customizability that comes with the realm of 3D printing. Commercial carbon fiber production, primarily from polyacrylonitrile (PAN), is energy-intensive and derived from crude oil, contributing to significant environmental impacts and poor recyclability. Alternatively, lignocellulosic natural fibers present a possible sustainable …

Development And Processing Of Shape Memory Polymer Composites (Smpcs) For Application In Structural Robotics And Robotic Sensors., Kavish Sudan

Electronic Theses and Dissertations

Shape Memory Polymers (SMPs) have attracted significant attention since their introduction in the 1980s due to their remarkable ability to regain their original shape from a temporarily deformed state when exposed to an external stimulus, typically heat. This shape memory effect, driven by thermal transitions such as the glass transition temperature (T_g) or melting temperature (T_m), has made SMPs highly attractive for applications in soft robotics, aerospace, and biomedical devices. However, SMPs face challenges such as limited mechanical strength, thermal stability, and electrical conductivity, which hinder their broader adoption in advanced applications. To address these challenges, …

Synergistic Strategies In Hybrid Mxed Matrix 3d Printing Of Thermoplastics & Thermosets: Design, Manufacturing, And Materials Development., Saleh Akram Khanjar

Electronic Theses and Dissertations

Composite manufacturing and mixed matrix structures have been produced using traditional manufacturing processes for various industrial applications due to their high mechanical properties to material weight and cost ratio. However implementation of composite and mixed matrix manufacturing with advanced manufacturing such as additive manufacturing is limited due to the hardware limitations of current 3d printing technologies and materials available for 3D printing applications. This work has developed and investigated a new hybrid 3D printing manufacturing process utilizing a variety of material systems (thermoplastic – thermoset, thermoplastic – thermoplastic, thermoset – thermoset, thermoplastic – thermoplastic – thermoset). This study developed thermoplastic …

Heat Treatment Post-Processing For The Improved Mechanical Properties Of Scalmalloy® Processed Via Directed Energy Deposition, Rachel Boillat-Newport, Sriram Praneeth Isanaka, Frank Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

As high-strength aluminum alloys present several processability issues with additive manufacturing (AM), Scalmalloy®, an Al-Mg-Sc-Zr-based alloy, has been developed. This alloy is age-hardenable, allowing it to precipitate out a strengthening precipitate phase, Al3(Sc,Zr). The manufacturer recommends a single-stage aging treatment at 325 °C for 4 h; however, the majority of the literature studies utilize a powder bed processing known as selective laser melting (SLM) over powder-fed processing directed energy deposition (DED). This study addresses the lack of information on heat treatments for DED fabrication by exploring the application of artificial aging temperatures of 300–400 °C for 2, 4, and 6 …

Investigating Near-Field Radiative Heat Transfer With Titanium Carbide Mxenes And Slanted Columnar Thin Films, Sean Luke Murray

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This work investigates the mechanisms to manipulate and control the magnitudes of Near-Field Radiative Heat Transfer (NFRHT) using two-dimensional materials and nanostructured surfaces. NFRHT occurs when the geometrical features of the radiating objects or the separation distance between interacting bodies are comparable to or lower than the characteristic thermal radiation wavelength. NFRHT magnitudes surpass the blackbody limit by several orders of magnitude due to phenomena such as photon tunneling and new modes of energy transfer, like surface polaritons. Therefore, it is crucial to understand how material properties and surface nanostructures affect NFRHT.

The first part of this work examines the …

Review Of Fourth-Order Predictive Modeling And Illustrative Application To A Nuclear Reactor Benchmark. I. Typical High-Order Sensitivity And Uncertainty Analysis, Dan Gabriel Cacuci, Ruixian Fang

Faculty Publications

This work (in two parts) will review the recently developed predictive modeling methodology called “4th-BERRU-PM” and its applicability to nuclear energy systems as exemplified by an illustrative application to the Polyethylene-Reflected Plutonium (acronym: PERP) OECD/NEA reactor physics benchmark. The acronym 4th-BERRU-PM designates the “Fourth-Order Best-Estimate Results with Reduced Uncertainties Predictive Modeling” methodology, which uses the Maximum Entropy (MaxEnt) principle to incorporate fourth-order experimental and computational information, including fourth (and higher) order sensitivities of computed model responses to model parameters, while yielding best-estimate results with reduced uncertainties for the first fourth-order moments (mean values, covariance, skewness, and kurtosis) of the optimally …

Understanding The Microstructure And Tribological Performance Of Cocrfeni-Based High Entropy Alloys, Ali Azarmi

All Theses

Due to their higher wear resistance compared to conventional alloys, high entropy alloys (HEAs) are now being considered as candidates for parts undergoing sliding contact during their lifetimes. While the engineering field has built some knowledge related to the performance of selected high entropy alloys, such as the CoCrFeNi alloy, more research is needed to determine if (how) expansions from four to five principal alloying elements alter the performance compared to the initial alloy. In this study, we started this research effort by investigating the relative performance of CoCrFeNiMn and CoCrFeNiTi with respect to CoCrFeNi. The two primary alloying elements …

Predicting The Ductility Of Tungsten Based Bcc Refractory High Entropy Alloys: A Computational Science Driven Study, Akshay Korpe

All Theses

Bcc refractory high entropy alloys (HEAs) are a relatively new category of metallic alloys that promise excellent irradiation resistance and strength retention at high temperatures but exhibit brittle behavior at room temperatures limiting their formability. Understanding the deformation mechanisms and predicting their ductility at room temperature is a topic of interest in contemporary research.

In this work, multiple independent ductility criteria for quantifying the ductility of these HEAs were studied, calculated and compared using Density Functional Theory (DFT) calculations and continuum mechanics frameworks. These ductility parameters were calculated for various W-Ta-Cr-V alloys and the trends were analyzed for each criteria …

Developing An Assessment Tool For Ideation Effectiveness: A Survey-Based Approach For The Shah’S Method Of Design Space Exploration, Venkat Jaya Deep Jakka

All Theses

The research is focused on creativity in engineering design. The goal is to understand if creativity in engineering design can be assessed using a less resource-intensive approach, specifically a survey, compared to design exercises. The survey builds on the metrics established by Shah and colleagues. The four metrics are Novelty, Quality, Variety and Quantity. The metrics are measured with the help of a design activity that is deployed to the participants. These metrics have been used in comparative analysis to assess treatments such as new design methods and personality types. However, the downside of the metrics is that they require …

Experimental And Computational Investigation Of Green Laser Propagation Through Turbulent Medium In A Water Tank, Richard Owusu Adansi

Open Access Theses & Dissertations

Turbulence medium poses significant challenges to the propagation of laser beams, impacting applications such as free-space optical communication, remote sensing, and laser weapons systems. Therefore, comprehending and mitigating turbulence effects are vital for enhancing the performance of these systems. Analysis of a strong turbulence impact on electromagnetic wave propagation requires extensive knowledge of the Earth's atmospheric and Oceanic phenomena and Maxwell's electromagnetic theory of light as a propagating wave of electric and magnetic fields. Optical systems' propagation often encounters Strong Turbulence, causing interference and diffraction. Nonetheless, light propagation through randomly fluctuating media has been an exciting and active area of …

Reactive Processing Of Hf-Nb-Ti-Ta Melts Into A B4c/C Packed Bed, Laura Leticia Sandoval

Open Access Theses & Dissertations

The reactivity of liquid Hf-Nb-Ti-Ta alloy in B4C/C packed bed to form boride-carbide precipitates for ultra-high temperature ceramics was investigated at 2800 K. The objectives were to predict the thermodynamic phases formed and verify them with microstructural characterization. A pseudo-isopiestic technique was used to significantly lower the oxygen potential as the liquid Hf alloy infused and reacted into a B4C packed bed within a graphite enclosure. The technique had a low temperature region (at 1300 K) to control the oxygen potential with a Y-Al/Y2O3-Al2O3/carbide mixture as a liquid Hf alloy at 2800 K and reacted with B4C/C. In addition, any …

Dynamic Model Of An Overhead Crane, Leonard Ruesga

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this thesis a novel spatial model of an overhead crane was developed. The model includes: bridge, trolley, driving and follower wheels for the bridge and trolley, drum, cable, and the payload. The model accounts for the winding/unwinding of the cable around the drum as the payload is raised/lowered. The cable and the payload were considered as rigid bodies with uniformly distributed mass. First, the kinematic equations of the model were developed by using constraint equations. Second, the dynamic equations were derived through use of Newton’s Laws. Developing the rotational dynamic equations required the determination of the angular momentum vectors …

Utilizing Bayesian Optimization In Technoeconomic Analyses For Integrated Energy Systems, Anthoney Griffith

All Graduate Theses and Dissertations, Fall 2023 to Present

Technoeconomic analysis is a key element in the study of integrated energy systems. The goal of this analysis is the sizing of technologies resulting in the best economic outcome for the system. The evaluation of this system involves sizing the components and simulating the resulting market to determine an outcome. This simulation incorporates multiple possible values of uncertain parameters like grid price and wind generation. This problem is currently approached with the gradient descent optimization method. An alternative approach, Bayesian optimization, sees success on simple problems of a similar nature to technoeconomic analyses. These results motivate applying Bayesian optimization as …

Development Of A High-Throughput Methodology For Vibration-Based Fatigue Tests, Brandon Alexander Furman

All Graduate Theses and Dissertations, Fall 2023 to Present

Global efforts towards the development of additively manufactured materials, biomaterials, metamaterials, self-healing materials, and composites have reached a staggering pace. With new materials being developed on a near-daily basis, it is more important than ever to be able to quickly and precisely quantify their mechanical performance. However, one of the most important mechanical properties, fatigue life, is notoriously time consuming to measure. Consequently, fatigue parameters are often calculated based on small sample sizes, resulting in high uncertainty of the measured parameters. In this dissertation a high-throughput approach to fatigue measurements is developed. This technique allows for multiple samples to accumulate …

Understanding Ion Rejection Mechanism Of Freeze Desalination By Molecular Dynamics Simulation, Mahbuba Jannat

All Graduate Theses and Dissertations, Fall 2023 to Present

This study explores a method called freeze desalination, which uses the natural process of ice formation to remove salt from water at lower than freezing temperature of water, which is 235K (Freezing temperature of this water model is 249K), making it safe for potable water. Unlike traditional methods, freeze desalination can be more efficient and environmentally friendly, but how it rejects salt at the molecular level is not very clear to understand. Using molecular dynamics simulation, this research aims to uncover the details of this process. We focused on understanding how water molecules interact with salt ions during freezing. Our …

Dynamic Modeling Of A Nuclear Integrated Energy System With Thermal Energy Storage And Hydrogen Production, Seth J. Dana

All Graduate Theses and Dissertations, Fall 2023 to Present

Historically, nuclear reactors have used water for cooling and moderating the nuclear reaction within the core. Advanced generation IV nuclear reactors currently under development are designed with different coolants which enable operation at higher temperatures. A higher operating temperature makes nuclear power suitable for co-located hydrogen production via high temperature electrolysis. Natrium, an advanced reactor design by TerraPower and GE Hitachi, combines a sodium fast reactor with molten salt thermal energy storage. The work presented in this thesis models and analyzes three Natrium systems which integrate hydrogen production with the Natrium nuclear power plant. The first two configurations focus on …

Trade-Offs In Lighting For Dic Strain Measurements In Vibration-Based Fatigue Testing, Jacob R. Rigby

All Graduate Theses and Dissertations, Fall 2023 to Present

Vibration based fatigue testing offers a fast and efficient method for determining the breaking point of a material. This method often uses a device, called a strain gage, to measure the deformation of a test sample at a single spot on the test sample. However, these strain gages often break before testing is complete. To overcome this premature break, a laser vibrometer is often used to measure the amount of movement or the speed of the test sample throughout the vibration test. The deformation measured by the strain gage is compared against the amount of movement or velocity of the …

Rapid Prediction Of Buoyancy-Driven Exchange Flows At The Great Salt Lake: Ml Models And A 1d Shallow Water Approach, Eric M. Larsen

All Graduate Theses and Dissertations, Fall 2023 to Present

The Great Salt Lake in Utah, USA, is a hypersaline terminal lake divided in to northern and southern arms by the Union Pacific Railroad causeway since the 1950's. This separation has caused a difference in density and water surface elevation between lake arms. These differences result in a buoyancy-driven exchange flow occurring through an engineered breach in the causeway. Traditionally, modeling the flow through the breach has been done by numerically solving the 1D steady shallow water equations, and using computational fluid dynamics (CFD). The CFD models yield high accuracy results, but require substantial computing resources. This research proposes the …

Synthesis Of Silica-Encapsulated Myristic Acid Phase-Change-Assisted Nanocapsules For Thermal Management Applications, Muhammad Ghufran, David Huitink

Mechanical Engineering Faculty Publications and Presentations

Myristic acid-based silica (MA/SiO₂) nano-encapsulated phase change materials (NePCMs) were synthesized by the sol–gel process. Five different samples of the MA/SiO₂ nanocapsules were prepared by varying the mass of the myristic acid. The nanocapsules were characterized by Fourier transform infrared spectrophotometer (FTIR), X-Ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), energy dispersive X-ray (EDX), and dynamic light scattering (DLS). These characterization techniques confirmed the successful encapsulation of the myristic acid inside the silica shell. The maximum latent heat was found to be 114.46 J/g for the sample which was prepared with 25 g myristic …

Modeling, Simulation, And Experimental Testing Of A Single-Legged Hopper, John Anthony Bennett

Master's Theses

Legged robots are well-suited for navigating unstructured terrain due to their ability to perform agile dynamic motions. Building on the efforts of Cal Poly's Legged Robotics Group, this project focuses on achieving stable forward hopping with a single legged robot.

A comprehensive model of leg hopping is formulated, with leg dynamics during flight and stance phases derived using Euler-Lagrange equations. During the stance phase, a spring-mass system models the leg-ground interaction. The touchdown and lift-off conditions are formulated mathematically, and state mappings between phases are determined via momentum conservation. A two-phase hybrid controller is designed, incorporating trajectory planning during flight …

Ultrashort Pulsed Laser Treatment Is Effective At Sterilizing Metal Surfaces For Planetary Protection, Kaleb Mcquillan

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

To prevent forward contamination from microbes aboard spacecraft intended for exploration of solar system bodies there is a need for effective sterilization methods. However, current techniques are both time-consuming and expensive. For example, dry heat sterilization requires removal from the assembly site and several days of treatment. Furthermore, some components such as optics and electronics are not compatible with current sterilization techniques. In this thesis, a novel femtosecond laser surface processing technique for the rapid sterilization of spacecraft hardware is reported. Femtosecond lasers produce extremely high photon fluxes (10²⁹ photons/s*cm², ~0.03 J/cm²) in extremely short …

Natural Language Processing For Automated Sysml Diagram Generation, Joshua Andre Ontiveros

Theses and Dissertations

This thesis explores the applications of natural language processing (NLP) techniques in model-based system engineering (MBSE) to help generate System Modeling Language (SysML) diagrams. MBSE is a method that aids in enhancing traditional engineering practices by modeling to help improve understanding and communication in systems development. SysML, one of the modeling languages for MBSE, helps represent a system's architecture, behavior, and information flow. Translating systems requirements and specifications into SysML models can be time-consuming and can lead to errors when created manually. Automating the creation of SysML diagrams from textual descriptions with the help of NLP techniques can aid in …

Advancements In Aerial Vehicle Platforms: A Guide For Design, Validation, And Implementation Of 3d Printed Drones, Alan Salvador Urteaga

Theses and Dissertations

Additive manufacturing methods have revolutionized the way products are designed and developed through a product's entire design life cycle. This is in part correlated with the nature of additive manufacturing methods that differentiate them from traditional methods. Some of the benefits of additive manufacturing methods include customizability, rapid prototyping, the production of complex design geometry, and embedded assembly manufacturing. Unmanned aerial vehicles have been on the rise for various military, commercial, or personal applications. The focus of this study is to provide detailed instructions on how to engineer a viable drone design that is impact-resistant, modular, and customizable. This study …

In Situ Shear Exfoliation Of Layered Materials And Fabrication Of Multifunctional Composites, Md Abdur Rahman Bin Abdus Salam

Theses and Dissertations

To harness the extraordinary properties of 2D nanomaterials across a range of applications, including but not limited to device fabrication (such as sensors and transistors), energy storage and conversion systems (like batteries and solar cells), as well as biomedical applications (such as drug delivery and tissue engineering), it is imperative to achieve proper synthesis to single-layer form from bulk material, ensuring defect-free synthesis. Recognizing the criticality of defect-free synthesis and high yield for nanocomposite production, our focus centered on developing a facile, contamination-free, single-step, in situ shear exfoliation process for bulk materials (such as graphene, hBN, coal) within elastomers, which …

Feature Extraction From Vibration Signature Acquired From Railroad Bearing Onboard Condition Monitoring Sensor Modules, Kevin Quaye

Theses and Dissertations

The University Transportation Center for Railway Safety (UTCRS) has designed an onboard monitoring system that tracks vibration waveforms over time, to obtain a direct and more accurate indicator of bearing health. The data collected by these sensors is used for vibrational analyses of the bearings. The speed of the bearing is a fundamental parameter needed to carry out the analysis. GPS data can be used to determine bearing speed if available; however, due to size, cost and power constraints GPS is typically not available at the sensor location. This means that analysis must be delayed until the data is uploaded …