Engineering Commons^™

Test 1769: White 6410, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1769: Agco Lt70 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1769: Agco Allis 8745 Diesel (Cummins Engine), Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Midcourse Guidance Law With Neural Networks, Dongchen Han, S. N. Balakrishnan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A neural network-based synthesis of an optimal midcourse guidance law is presented in this study. We use a set of two-neural networks; the first network called 'a critic' outputs the Lagrange's multipliers arising in an optimal control formulation and second network called 'an action network' outputs the optimal guidance/control. In this so-called 'adaptive critic' approach, the inputs to the networks are the current values of the states. This approach needs no external training. System equations, optimality conditions and the costate equations are used in conjunction with the network outputs to provide the targets for the neural networks. When the critic …

Carryover For Hypersonic '+' And 'X' Configuration Delta Fin Missiles, Harlan F. Nelson

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The Zonal Euler Solver code (ZEUS) is used to predict hypersonic missile flow fields and to determine the carryover factors for the effect of the body on wing lift, Kw(B), and for the effect of the wing on body lift, KB(w). Results are presented for Mach 4, 6, 8, and 10 at an angle of attack of 2 deg. The missile has a conical nose and a cylindrical fuselage with a 1-degree flair angle. Both 'x' and '+' fin configurations are considered. Results are given for 20 and 30 deg semi vertex angles as a function of fur span to …

Editorial, Ahmed Noor, Victor Birman

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Robust Adaptive Critic Based Neurocontrollers For Systems With Input Uncertainties, S. N. Balakrishnan, Zhongwu Huang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A two-neural network approach to solving optimal control problems is described in this study. This approach called the adaptive critic method consists of two neural networks: one is called the supervisor or critic, and the other is called an action network or controller. The inputs to both these networks are the current states of the system to be controlled. Each network is trained through an output of the other network and the conditions for optimal control. When their outputs are mutually consistent, the controller network output is optimal. The optimality is limited to the underlying model. Hence, we develop a …

Electroanalysis Using Differential Pulse Methods And Stripping Techniques., Enda Howard

Masters

Application of a differential pulse waveform to a microelectrode or a rotating disk electrode results in a peaked response for amperometric redox reactions. Based on these observations models were proposed and tested for these methods. Simulations of the models were carried out by inputting the relevant equations into Microsoft Excel. The microelectrode study revealed a good correlation between one model and the numerical derivative of the current following a linear sweep potential waveform. Experimentally the derivative can be obtained numerically following a linear sweep. The alternative differential pulse waveform requires more sophisticated equipment and the response can be affected by …

The Development Of Design And Test Methodologies For Hovercraft, John Cronin

Theses

This project is concerned with the development of design and test methodologies for hovercraft.

Full-scale hovercraft field-testing is to be achieved through the dedicated re-design and re-construction of the ABl11Crossbow hovercraft. The Crossbow hovercraft is an experimental craft, which was built in England in the early seventies. The Crossbows re-design focuses on the production of a versatile craft, which is capable of modification to produce a variety of different operating conditions. The re-design and re-construction comprises several distinct areas. An improved and adjustable lift and thrust system is designed. The design and manufacture of a new more stable and versatile …

Effects Of Foot Orthoses On Skeletal Motion During Running, A. Stacoff, C. Reinschmidt, B. M. Nigg, Antonie J. Van Den Bogert, A. Lundberg, J. Denoth, E. Stüssi

Mechanical Engineering Faculty Publications

Objective. To quantify the effects of medial foot orthoses on skeletal movements of the calcaneus and tibia during the stance phase in running.

Design. Kinematic effects of medial foot orthoses (anterior, posterior, no support) were tested using skeletal (and shoe) markers at the calcaneus and tibia.

Background. Previous studies using shoe and skin markers concluded that medially placed orthoses control/reduce foot eversion and tibial rotation. However, it is currently unknown if such orthoses also affect skeletal motion at the lower extremities.

Methods. Intracortical Hofman pins with reflective marker triads were inserted under standard local anesthetic into the calcaneus …

Modeling The Effect Of Plasticizer On The Viscoelastic Response Of Crosslinked Polymers Using The Tube-Junction Model, P. P. Simon, Harry J. Ploehn

Faculty Publications

Plasticizers modify the mechanical properties of polymericmaterials. The effects of plasticizers on glass transition temperatures can be most clearly observed in isochronal temperature sweep profiles of viscoelastic dynamic moduli. However, no simple mathematical models of plasticization are available to those who wish to design and employ plasticized materials in specific applications. We extend a phenomenological, molecular-level model (known as the tube–junction model) for crosslinked polymers to describe the effect of plasticizers on dynamic moduli. We show that the increase in free volume fraction due to the presence of the plasticizer can account for the shift in the glass transition in …

Technology In Engineering Education: What Do The Faculty Know (And Want) Anyway?, John C. Chen, Michael Ellis, Jason Lockhart, Sameer Hamoush, Catherine E. Brawner

Mechanical Engineering

We have conducted a survey of engineering faculty at the eight SUCCEED coalition universities to identify the training needs and present levels of experience with various technologies. The results of that survey are presented in this paper.

The most surprising finding from the survey is that, despite the wide differences in the Coalition’s colleges of engineering (in size, student demographics, and research-teaching emphasis, for example), the survey results are similar for all campuses. This is important in that it implies that the survey results may be widely applicable to other universities, even given the disparate state of technology integration and …

Nebraska Summary: S357 Case-Ih Mx90c, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Matrix Structural Analysis, 2nd Edition, William Mcguire, Richard H. Gallagher, Ronald D. Ziemian

Faculty Books

The aims of the first edition of Matrix Structural Analysis were to place proper emphasis on the methods of matrix structural analysis used in practice and to lay the groundwork for more advanced subject matter. This extensively revised Second Edition accounts for changes in practice that have taken place in the intervening twenty years. It incorporates advances in the science and art of analysis that are suitable for application now, and will be of increasing importance in the years ahead. It is written to meet the needs of both the present and the coming generation of structural engineers.

KEY FEATURES …

Study Of Human Head Impact: Brain Tissue Constitutive Models., Toru Aida

Graduate Theses, Dissertations, and Problem Reports (ETD)

Finite element (FE) models of the human head have been used extensively to assess engineering response parameters (pressure, shear strain, etc.) that constitute the basis of various injury criteria including the Head Injury Criterion (HIC). There is a wide range of brain material properties reported in the literature, and linear elastic models are frequently used for the brain tissue which is viscoelastic in nature. The uncertainty around the properties of brain tissue affects the perceived importance of those response parameters under consideration. In this research, the effect on head injury criteria of five reported viscoelastic brain models and their linear …

Piezoceramic Actuator Placement For Acoustic Control Of Panels, Jeffrey S. Bevan

Mechanical & Aerospace Engineering Theses & Dissertations

Optimum placement of multiple traditional piezoceramic actuators is determined for active structural acoustic control of flat panels. The structural acoustic response is determined using acoustic radiation filters and structural surface vibration characteristics. Linear Quadratic Regulator (LQR) control is utilized to determine the optimum state feedback gain for active structural acoustic control. The optimum actuator location is determined by minimizing the structural acoustic radiated noise using a modified genetic algorithm. Experimental tests are conducted and compared to analytical results.

Anisotropic piezoceramic actuators exhibit enhanced performance when compared to traditional isotropic piezoceramic actuators. As a result of the inherent isotropy, these advanced …

Effects Of Ventilation On Human Thermal Comfort In Rooms, Ahmed F. Alfahaid

Mechanical & Aerospace Engineering Theses & Dissertations

Nowadays, the majority of people spend up to 90% of their time indoors; as a result, the maintenance of optimal indoor climate conditions has become important for their overall health and comfort. The main goal of this study is to predict numerically the flow and temperature patterns and the human thermal comfort conditions in an indoor environment using displacement ventilation.

A Computational Fluid Dynamics (CFD) code has been used to analyze thermal comfort conditions for a fullscale ventilated room. Unstructured grids have been used to discretize the numerical domain. Before undertaking a detailed investigation, the code was validated by comparing …

Nebraska Summary 334: Agco Dt180 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1930: Case Ih Mx 80c Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1783: Case Ih Stx 375/New Holland Tj 375 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1918: New Holland Tm125 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1920: New Holland Tm150 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Tests 1948 & 1949: New Holland Tn 65 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1942: Buhler Versatile 2360 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1770: John Deere 5105 Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1774: John Deere 8210t Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1775: John Deere 8310 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1779: Agco Allis 8775 Diesel 32-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary: S343 New Holland Tm125, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S351 New Holland 9684, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …