Engineering Commons^™

Oxygen Permeation Through Cobalt-Containing Perovskites: Surface Oxygen Exchange Vs. Lattice Oxygen Diffusion, Kevin Huang, John B. Goodenough

Faculty Publications

The oxygen permeation fluxes from p′_O2 to pⁿ_O2 (p′_O2>pⁿ_O2) across cobalt-containing perovskite ceramic membranes La_1−xSr_xCoO_3−δ and SrCo_0.8Fe_0.2O_3−δ were measured by gas chromatography as functions of oxygen chemical potential gradient, temperature, thickness, and catalytic activity on the surface. Power indexes 0.5>n>0 for uncatalyzed La_1−xSr_xCoO_3−δ and 1>n>0.5 for SrCo_0.8Fe_0.2O_3−δ were obtained when J_O2 vs. p′ⁿ_O2−p'′ⁿ_{O2 …}

Overview Of Fuzzy Logic, Mohamed Trabia

Mechanical Engineering Faculty Presentations

The presentation includes a brief introduction to fuzzy logic and fuzzy logic controllers. These concepts are illustrated by an example of an autonomous vehicle controller.

Comparison Of Two Distributed Fuzzy Logic Controllers For Flexible-Link Manipulators, Linda Z. Shi, Mohamed Trabia

Mechanical Engineering Faculty Presentations

The paper suggests that fuzzy logic controllers present a computationally efficient and robust alternative to conventional controllers. The paper presents two possible structures for the distributed fuzzy logic controller of a single-link flexible manipulator. A linear quadratic regulator method is used to prove the effectiveness of fuzzy logic controllers.

Design Of Fuzzy Logic Controllers For Optimal Performance, Mohamed Trabia

Mechanical Engineering Faculty Presentations

While fuzzy logic controllers are generally robust, the performance of a system whose behavior is not well understood, or that has a large number of coupled inputs and outputs, may be less than optimal. In this paper, nonlinear programming techniques are used to improve the performance of a fuzzy logic controller for navigating an autonomous vehicle.

A Neural Network-Based Vision System For Automated Separation Of Onion From Clod Using Mechanical Harvester, Demian Morquin

Theses and Dissertations - UTB/UTPA

A neural network classifier for separating clods from onions during harvesting has been developed. The separator consists of a multi-layer feedforward network that maps textural features computed from gray-scale images of onions and clods into the correct object. Texture features were computed from co-occurrence matrices that specify the spatial relationship of pixel values in an image. The textural features selected for this application consist of homogeneity, contrast, variance, and energy. The network was trained using the back-propagation algorithm. Based on the textural features classification, the effect of changing the network configuration on separation effectiveness was investigated. Factors including network topology …

An Electronically Tunable Resonator For Noise Control, Charles Birdsong, Clark J. Radcliffe

Mechanical Engineering

Many engineering systems create unwanted noise that can be reduced by the careful application of engineering noise controls. When this noise travels down tubes and pipes, a tuned resonator can be used to muffle noise escaping from the tube. The classical examples are automobile exhaust and ventilation system noise. In these cases where a narrow frequency band of noise exists, a traditional engineering control consists of adding a tuned Helmholtz resonator to reduce unwanted tonal noise by reflecting it back to the source (Temkin, 1981). As long as the frequency of the unwanted noise falls within the tuned resonator frequency …

A New Portable, Pc Based, Usb Powered Dynamic Signal Analyzer, Charles Birdsong, George Ma, James Nieters, Justin Tang, Caine Yu

Mechanical Engineering

A new USB powered portable 4-channel real time Dynamic Signal Analyzer and its automotive applications are described. The design and architecture lend themselves to real time NVH measurements and analysis in the field, in-vehicle or on production lines. Built-in signal conditioning provides for direct sensor power while the embedded DSP provides for signal processing on-board. Performance and implementation of FFT, digital filters and order analyses are presented.

The Importance Of Site Surveys In Florida's Pv Buildings Program, Florida Solar Energy Center, Kevin Lynn

FSEC Energy Research Center®

One of the goals of the Florida PV Buildings Program is to ensure that only quality utility-interactive PV systems are installed in the state. One important component of the Program is the site survey. The purpose of the site survey is to inspect the potential location for PV system before beginning construction, ensuring it is a sensible place to install it. The purpose of this paper is to introduce the method used by this Program and to present some examples that will demonstrate why it is important.

Apr 2001, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Camp Creek Swap Meet Public Relations Get Fordson Running

A Comparative Analysis Of Studies On Heat Transfer And Fluid Flow In Microchannels, Choondal B. Sobhan, Suresh V. Garimella

CTRC Research Publications

The extremely high rates of heat transfer obtained by employing microchannels makes them an attractive alternative to conventional methods of heat dissipation, especially in applications related to the cooling of microelectronics. A compilation and analysis of the results from investigations on fluid flow and heat transfer in micro- and mini-channels and microtubes in the literature is presented in this review, with a special emphasis on quantitative experimental results and theoretical predictions. Anomalies and deviations from the behavior expected for conventional channels, both in terms of the frictional and heat transfer characteristics, are discussed.

Hide Glue Applicator, Chris Campo, Benjamin Carrasco, Elias Saliba

Mechanical Engineering

This study investigates the challenges inherent in applying hide glue in the crafting of violin and other stringed instruments. Hide glue, derived from animal collagen and protein, is essential for creating durable bonds that allow for necessary adjustments during fabrication. However, its meticulous heating and maintenance requirements pose logistical obstacles for luthiers lacking viable alternatives. To tackle this issue comprehensively, our project comprises several key components.

Initially, we conducted an in-depth analysis of the hide glue application process, delineating procedural steps and techniques to establish our design criteria and constraints. This foundational understanding formed the basis for further exploration. Additionally, …

Modeling Nonlinear Behavior In A Piezoelectric Actuator, Hanz Richter, Eduardo A. Misawa, D. A. Lucca, H. Lu

Mechanical Engineering Faculty Publications

A piezoelectric tube actuator is employed as a sample positioning device in Nanocut, a cutting instrument conceived to study the mechanics of nanometric cutting. Extension of functionality of the instrument as a nanometric machine tool motivates the search for an accurate model of the actuator for implementing feedback control. A simple nonlinear model describing longitudinal expansion of the piezoelectric tube actuator is presented in this paper. The model derivation is based on a non-formal analogy with nonlinear viscoelastic materials under uniaxial extension, for which the responses to a step input are similar to the piezoelectric tube. Suitability of the …

Study Of Automotive Hydromount Mechanism, Min Lu

Dissertations

The hydromount mechanism is studied. It was determined that the dynamic characteristics of the hydromounts are related to the rubber static stiffness, rubber damping coefficient, volumetric stiffness, and effectiveness of the oscillating fluid in the inertia track. At high frequencies the motion of the fluid in the inertia track diminishes so that its effect is negligible and may be ignored. It is also concluded that the rubber damping has a minimal effect on the hydromount dynamic properties and may be neglected. The maximum loss angle, which corresponds to the maximum damping coefficient of the hydromount, occurs near the inertia track …

Elastic Properties, Strength And Damage Tolerance Of Pultruded Composites, Mrinal Chandra Saha

Mechanical & Aerospace Engineering Theses & Dissertations

Pultruded composites are candidate materials for civil engineering infrastructural applications due their higher corrosion resistance and lower life cycle cost. Efficient use of materials like structural members requires thorough understanding of the mechanism that affects their response. The present investigation addresses the modeling and characterization of E-glass fiber/polyester resin matrix pultruded composites in the form of sheets of various thicknesses.

The elastic constants were measured using static, vibration and ultrasonic methods. Two types of piezoelectric crystals were used in ultrasonic measurements. Finally, the feasibility of using a single specimen, in the form of a circular disk, was shown in measuring …

A Substructuring Technique With Application To Spot Weld Placement Design, Yang Wang

Mechanical & Aerospace Engineering Theses & Dissertations

It is quite common in the industry to use various interface methods, such as welding, fasteners, bolts, adhesive bonding, etc., to join substructures together. The quality of the assembled structure is directly related to the type of the interface methods used in the manufacturing process. Thus, it is important to include the interface conditions as part of design variables in any design process. To this end, this work develops a reanalysis method that can efficiently analyze structures with variations on the interface conditions. This reanalysis method is based upon a new two-step substructuring technique. The first step performs substructural level …

Spice-Based Heat Transport Model For Non-Intrusive Thermal Diagnostic Applications, Michael Stelzer

Electrical & Computer Engineering Theses & Dissertations

Nondestructive material testing and diagnostics play an important role in reliability analysis, component wear-out testing, life-cycle estimates, and safety inspections. Of the several techniques available for nondestructive inspections, thermal analysis has been chosen to be the focus of this thesis research. An equivalence between the system of equations for the heat flow problem, and the variables of circuit theory suggests that an electrical model can be constructed to represent the actual thermal system. This electrical model is constructed based upon a finite difference discretization of the heat flow equation. Using these associations a basic one-dimensional electrical model has been constructed …

Development And Testing Of A Cfd-Based Optimization System For Axially Symmetric Rocket Nozzles, John-Paul Shebalin

Mechanical & Aerospace Engineering Theses & Dissertations

A software system has been developed to optimize rocket nozzle shapes for maximizing their performance. It has been established in the literature that one can use computer-based optimization with the parabolized Navier-Stokes equations to optimize the dimensions of low Reynolds number rocket nozzles-micronozzles. The Nozzle Optimization System described herein uses the full Navier-Stokes equations to optimize any axially symmetric rocket nozzle for which a converged solution can be obtained.

Four nozzles are optimized using this system-conical and contoured micronozzles and conical and contoured Space Transportation System(STS)-class nozzles. The optimum cone angle (O_cone) for the conical micronozzle was …

Reduced-Temperature Solid Oxide Fuel Cells Fabricated By Screen Printing, Changrong Xia, Fanglin Chen, Meilin Liu

Faculty Publications

Electrolyte films of samaria-doped ceria (SDC, Sm_0.2Ce_0.8O_1.9) are fabricated onto porous NiO-SDC substrates by a screen printing technique. A cathode layer, consisting of Sm_0.5Sr_0.5CoO₃ and 10 wt % SDC, is subsequently screen printed on the electrolyte to form a single cell, which is tested at temperatures from 400 to 600°C. When humidified (3% H₂O) hydrogen or methane is used  as fuel and stationary air as oxidant, the maximum power densities are 188 (or 78) and 397 (or 304) mW/cm² at 500 and 600°C, respectively. Impedance analysis …

Bistable Operation Of A Two-Section 1.3-Mm Inas Quantum Dot Laser—Absorption Saturation And The Quantum Confined Stark Effect, Xiaodong Huang, A. Stintz, Hua Li, Audra Rice, G. T. Liu, L.F. Lester, Julian Cheng, K.J. Malloy

Faculty Publications

Room temperature, continuous-wave bistability was observed in oxide-confined, two-section, 1.3- m quantum-dot (QD) lasers with an integrated intracavity quantum-dot saturable absorber. The origin of the hysteresis and bistability were shown to be due to the nonlinear saturation of the QD absorption and the electroabsorption induced by the quantum confined Stark effect.

Analysis Of Microdamage Evolution Histories In Composites, Yuris A. Dzenis, Jie Qian

Department of Engineering Mechanics: Faculty Publications

Evolution of microdamage in advanced composites was experimentally studied in this paper. A new method of acoustic emission (AE) analysis of histories of different damage mechanisms was formulated based on a combination of transient AE classification and multiparameter filtering. The capabilities of the method were illustrated on examples of damage evolution in several graphite/epoxy composites. Three characteristic AE waveforms with different frequency spectra were identified based on the transient analysis. Regions occupied by these waveforms in the amplitude–rise time parametric space were identified for the [0]₈ and [90]₁₆ unidirectional composites. Multiparameter filtering was applied to extract evolution histories …

Control And Characterization Of Line-Addressable Micromirror Arrays, Harris J. Hall

Theses and Dissertations

This research involved the design and implementation of a complete line-addressable control system for a 32x32 electrostatic piston-actuated micromirror array device. Line addressing reduces the number of control lines from N² to 2N making it possible to design larger arrays and arrays with smaller element sizes. The system utilizes the electromechanical bi-stability of individual elements to bold arbitrary bi-stable phase patterns. The control system applies pulse width modulated (PWM) signals to the rows and columns of the micromirror array. Three modes of operation were conceived and built into the system. The first was the traditional signal scheme which requires …

Effects Of Concentration And Temperature On The Coupled Heat And Mass Transport In Liquid Mixtures, Yaşar Demirel, Stanley I. Sandler

Papers in Thermal Mechanics

Using published experimental data on the thermal conductivity, mutual diffusivity, and heats of transport, the degree of coupling between heat and mass flows has been calculated for binary and ternary nonideal liquid mixtures. The binary mixtures consist of two types: the first is six systems of six-to-eight-carbon straight and branched chain alkanes in chloroform and in carbon tetrachloride; and the second is mixtures of carbon tetrachloride with benzene, toluene, 2-propanone, n-hexane, and 11-octane. The ternary mixture considered is toluene-chlorobenzene-bromobenzene. The published data are available at 35°C, 30°C, and 35°C and ambient pressure. Using the linear nonequilibi-ium thermodynainics (LNET) and the …

Smart Material Control System And Related Method, John A. Main, George C. Nelson

Mechanical Engineering Faculty Patents

A smart material control system and related method is disclosed for adaptively controlling the movement of an adaptive structure. The adaptive structure includes a smart material layer bonded to a conductive substrate in a bimorph configuration. A charge projector, such as an electron gun, is utilized to project charges onto the smart material layer of the adaptive structure. A voltage/charge source adaptively controls the potential of the conductive substrate. Depending on the placement of the projected charges and the adaptively controlled potential of the conductive substrate the displacement/curvature is precisely controlled. In an alternate embodiment, two smart material layers are …

Rate Effects On Mode-I Delamination Toughness Of A Graphite/Epoxy Laminated Composite, Xiangfa Wu, Yuris A. Dzenis

Department of Engineering Mechanics: Faculty Publications

Mechanical properties of composite materials made of high modulus fibers and relatively low modulus polymeric matrix, such as graphite/epoxy laminated composites, are sensitive to loading rate and temperature. Generally, at fixed loading rate, when temperature increases, the fracture toughness of polymers also increases; however, it will decrease with the increase of loading rate at constant testing temperature. Rate effects on fracture toughness are of critical to understand the fracture transition from ductile to brittle of some polymers. However, there have been fewer studies of rate effects on delamination toughness of laminates compared to that of pure polymers. In the present …

Numerical Stimulation Of Stress-Induced Crystallization Of Injection Molded Semicrystalline Thermoplastics, Jianxin Guo

Dissertations

Injection molded semicrystalline plastic products exhibit variable morphology along their thickness directions. The processing conditions have a significant effect on the crystallinity distribution in the final parts. However, because of the lack of sound theoretical models for stress-induced crystallization kinetics in thermoplastics, simulations of the injection molding process of semicrystalline plastics with the consideration of stress-induced crystallization have been scarce.

A stress-induced crystallization model for semicrystalline plastics is proposed based on the theory that stress induced orientation of polymer chains increase the melting temperature of the plastics, and hence, the supercooling which is the driving force for crystallization. By assuming …

Numerical Modeling And Optimization Of Waterjet Based Surface Decontamination, Konstantin Babets

Dissertations

The mission of this study is to investigate the high-pressure waterjet based surface decontamination. Our specific objective is to develop a practical procedure for selection of process conditions at given constraints and available knowledge. This investigation is expected to improve information processing in the course of material decontamination and assist in the implementation of the waterjet decontamination technology into practice. The development of a realistic procedure for processing of a chaotic and non-accurate information constitutes the main accomplishment of this study.

The research involved acquisition of representative information about removal of brittle, elastic and viscous deposits. As a result an …

Electro-Magnetic Control Of Cylinder Wake, Zhihua Chen

Dissertations

The objective of this dissertation is to develop open and closed-loop control algorithms for manipulating wake flows past a solid cylinder in an electrically low-conducting fluid (e.g. seawater). The intent is to avoid both vortex shedding and flow separation from the body. It is desired to reduce the mean drag significantly and prevent the lift from becoming non-zero at all times. This is achieved through the introduction of a Lorentz force in the azimuthal direction generated by an array of permanent magnets and electrodes located on the solid structure. The array of actuators offers the advantage of making the Lorentz …

Kinematic Synthesis Of Adjustable Spatial Four And Five-Bar Mechanisms For Finite And Multiply Separated Positions, Kevin Russell

Dissertations

Although spatial mechanisms are more general in structure than planar mechanisms, their applications are few due to the limited number of practical design tools and the complexity of those available. It is in fact the task of the future to develop effective, but practical design tools for spatial mechanisms.

This research presents several new methods for synthesizing adjustable spatial mechanisms. The first method involves the kinematic synthesis of spatial mechanisms for multiphase motion generation. Using this method, spatial four and five-bar mechanisms can be synthesized to achieve different phases of prescribed rigid body positions. The theory of this approach has …

Numerical Studies Of Newtonian And Viscoelastic Fluids, Felix J. Alcocer

Dissertations

The direct numerical simulation (DNS) approach is used to understand the flow behavior of Newtonian and viscoelastic fluids in porous materials, four-to-one contraction and the flow of a Newtonian fluid past an airfoil.

In simulations the viscoelastic fluid is modeled by the finitely extensible nonlinear elastic (FENE) dumbbell and Oldroyd-B models. The finite element method (FEM) is used to discretize the flow domain. The DNS results show that the permeability of a periodic porous medium depends on the wavelength used for arranging particles in the direction of flow. Specifically, it is shown that for a given particle size and porosity …

Jan 2001, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

New Personel Area rearrangement Missouri Valley Wrench Club