Engineering Commons^™

Japanese R&D On Large-Scale Co2 Capture, Takahisa Yokoyama

Separations Technology VI: New Perspectives on Very Large-Scale Operations

The Special Report on Carbon dioxide Capture and Storage was recently accepted by IPCC (1). In the context of optimization and integration of CO2 capture and sequestration, CO2 capture is a particularly important step. This paper presents a broad overview of key issues of CO2 capture technologies in the Japanese R&D, focusing on their application to large-scale power plants.

Lean Energy Analysis: Identifying, Discovering And Tracking Energy Savings Potential, J. Kelly Kissock, John Seryak

Mechanical and Aerospace Engineering Faculty Publications

Energy in manufacturing facilities is used for direct production of goods, space conditioning, and general facility support such as lighting. This paper presents a methodology, called lean energy analysis, LEA, for graphically and statistically analyzing plant energy use in terms of these major end uses.

The LEA methodology uses as few as 60 easily obtainable data points. Multivariable change-point models of electricity and natural gas use as functions of outdoor air temperature and production data are developed. The statistical models are used to subdivide plant energy use into facility, space-conditioning and production-related components.

These breakdowns suggest the savings potential from …

Work Flow Policy And Within-Worker And Between-Workers Variability In Performance, Kenneth Howard Doerr, Tali Freed, Terence R. Mitchell, Chester A. Schriesheim, Xiaohua Zhou

Industrial and Manufacturing Engineering

Work flow policies are shown to induce a change in average between-workers variability (worker heterogeneity) and within-worker variability in performance times. In a laboratory experiment, the authors measured the levels of worker heterogeneity and within-worker variability under an individual performance condition, a work sharing condition, and a fixed assignment condition. The work sharing policy increased the levels of worker heterogeneity and worker variability, whereas the fixed assignment policy decreased them. These effects, along with work flow policy main effects on mean performance times and variability are examined. This article represents an initial step in understanding effects that may be important …

Ole Miss Engineer 2004

Ole Miss Engineer

No abstract provided.

Layer-By-Layer Nanoassembly Combined With Microfabrication Techniques For Microelectronics And Microelectromechanical Systems, Jingshi Shi

Doctoral Dissertations

The objective of this work is to investigate the combination of layer-by-layer self-assembly with microfabrication technology and its applications in microelectronics and MEMS.

One can assemble, on a standard silicon wafer, needed multilayers containing different nanoparticles and polymers and then apply various micromanufacturing techniques to form microdevices with nanostructured elements.

Alternate layer-by-layer self-assembly of linear polyions and colloidal silica at elevated temperatures have been firstly studied by QCM and SEM. LbL self-assembly and photolithography were combined to fabricate an indium resistor. The RTA method was employed in the fabrication. Hot-embossing technique as a reasonably fast and moderately expensive technique was …

The Non-Destructive And Nano-Microstructural Characterization Of Thermal-Barrier Coatings, Y. H. Sohn, B. Jayaraj, S. Laxman, B. Franke, J. W. Byeon, Anette M. Karlsson

Mechanical Engineering Faculty Publications

The durability of thermal barrier coatings (TBCs) plays an important role in the service reliability and maintainability of hot-section components in advanced turbine engines for aerospace and utility applications. Photostimulated luminescence spectroscopy (PSLS) and electrochemical impedance spectroscopy (EIS) are being concurrently developed as complimentary nondestructive evaluation (NDE) techniques for quality control and liferemain assessment of TBCs. This paper discusses recent achievements in understanding the residual stress, phase constituents, and electrochemical resistance (or capacitance) of TBC constituents—with an emphasis on the thermally grown oxide. Results from NDE by PSLS and EIS are correlated to the nano- and microstructural development of TBCs.

Multi-D Cfd Modeling Of Free-Piston Stirling Convertor At Nasa Grc, Scott D. Wilson, Rodger W. Dyson, Roy C. Tew, Mounir B. Ibrahim

Mechanical Engineering Faculty Publications

A high efficiency Stirling Radioisotope Generator (SRG) is being developed for possible use in long duration space science missions. NASA s advanced technology goals for next generation Stirling convertors include increasing the Carnot efficiency and percent of Carnot efficiency. To help achieve these goals, a multidimensional Computational Fluid Dynamics (CFD) code is being developed to numerically model unsteady fluid flow and heat transfer phenomena of the oscillating working gas inside Stirling convertors. Simulations of the Stirling convertors for the SRG will help characterize the thermodynamic losses resulting from fluid flow and heat transfer between the working gas and solid walls. …

Sagittal Plane Biomechanics Cannot Injure The Acl During Sidestep Cutting, Scott G. Mclean, Xuemei Huang, Anne Su, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

Background. Knee joint sagittal plane forces are a proposed mechanism of anterior cruciate ligament injury during sport movements such as sidestep cutting. Ligament force magnitudes for these movements however, remain unknown. The need to examine injury-causing events suggests elucidation via model-based investigations is possible. Using this approach, the current study determined whether sagittal plane knee loading during sidestep cutting could in isolation injure the anterior cruciate ligament.

Methods. Experiments were performed on subject-specific forward dynamic musculoskeletal models, generated from data obtained from 10 male and 10 female athletes. Models were optimized to simulate subject-specific cutting movements. Random perturbations …

2004 (Fall) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the fall of 2004.

Science For Stewardship: Multidisciplinary Research On Uss Arizona, Matthew A. Russell, Larry E. Murphy, Donald L. Johnson, Timothy J. Foecke, Pamela J. Morris, Raphy Mitchell

Department of Mechanical and Materials Engineering: Faculty Publications

The National Park Service’s Submerged Resources Center and USS Arizona Memorial are conducting and coordinating research directed at understanding the nature and rate of natural processes affecting the deterioration of the USS Arizona in Pearl Harbor, Hawaii. The USS Arizona Preservation Project is designed to be multi-year, interdisciplinary and cumulative, with each element contributing to developing an overall management strategy designed to minimize environmental hazard from fuel oil release and provide the basic research required to make informed management decisions for long-term preservation. The primary project focus is toward acquiring requisite data for understanding the complex corrosion and deterioration processes …

Admittance Selection For Force-Guided Assembly Of Polygonal Parts Despite Friction, Shuguang Huang, Joseph M. Schimmels

Mechanical Engineering Faculty Research and Publications

An important issue in the development of force guidance assembly strategies is the specification of an appropriate admittance control law. This paper identifies conditions to be satisfied when selecting the appropriate admittance to achieve force-guided assembly of polygonal parts for multipoint contact with friction. These conditions restrict the admittance behavior for each of the various one-point and two-point contact cases and ensure that the motion that results from contact reduces part misalignment for each case. We show that, for bounded friction and part misalignments, if the identified conditions are satisfied for a finite number of contact configurations and friction coefficients, …

In-Drift Natural Convection And Condensation, Stephen W. Webb, Phillip Rogers, John Del Mar, Darrell Svalstad, Cliff Howard, Ernest Hardin, Bechtel Saic Company, Llc

Publications (YM)

The Yucca Mountain repository configuration consists of waste packages stored inside of underground tunnels, or drifts. The waste packages generate heat due to radioactive decay, and moisture flows into and out of the drifts in liquid and vapor form. Heat and mass transfer within the drifts, including interaction with the surrounding rock, are potentially important processes for the performance of the repository. The present report documents models for in-drift heat and mass transfer during the post-closure period. Pre-closure, or ventilated, conditions are documented in a separate report (BSC 2004 [DIRS 169862]).

Distal Placement Of An End-To-Side Bypass Graft Anastomosis A 3-D Computational Study, John Robert Di Cicco

Mechanical & Aerospace Engineering Theses & Dissertations

A three-dimensional computational fluid dynamics study of blood flow through stenotic arteries has been conducted. Flow phenomena, such as separation regions and turbulence, can be found distal to an arterial stenosis. Frequently, a bypass graft using an end-to-side technique is attached to a stenotic artery to restore adequate blood flow. However, a significant percentage of these grafts fail after thirty postoperative days due to intimal hyperplasia development around the distal anastomosis. Moreover, aberrant wall shear rates have been implicated as a factor in the development of intimal hyperplasia. Thus, the present study examines whether placement of the distal end of …

Modal Analysis And Validation Of A Gasoline Fuel Injector Using Ansys And Laser Vibrometer, Ravi Kiran Kothamasa

Mechanical & Aerospace Engineering Theses & Dissertations

In the present day market it has been demonstrated that quality and speed make a product successful. An automobile has hundreds of components, which work in synchronization to make the automobile run smoothly. The fuel injector is one of the key components of an automobile. The primary functions of a fuel injector are: to deliver measured quantity of fuel to the engine, to atomize fuel for efficient combustion process, to deliver measured or atomized quantity of fuel to the desired target within manifold/head, and to shut off the fuel supply when no fuel is required. When this fuel injector is …

Effects Of Initial Seated Position On Whiplash In Low Speed Rear-End Impacts Comparison And Study Using The Tno Rear Impact Dummy (Trid) Model, Manjunath P. Venkataramana

Mechanical & Aerospace Engineering Theses & Dissertations

Despite numerous investigations devoted to its scrutiny, injury causing mechanism associated with rear-end impact collision producing injury such as Whiplash Associated Disorder (WAD) has remained a mystery. Several criteria have been proposed to predict the injury causing mechanism, but none have been universally accepted. The challenge lies in determining a set of testing procedures representative of real-world collisions, wherein the results obtained are not only the same as human testing, but remain consistent with various subjects and impact conditions. It is hypothesized that one of the most important considerations is the effect of initial seated position (ISP).

This thesis can …

An Algorithm For Locating Fundamental Frequency (F0) Markers In Speech, Princy Dikshit

Electrical & Computer Engineering Theses & Dissertations

Speech has been the principal form of human communication since it began to evolve at least one hundred thousand years ago. Speech is produced by vibrations of the vocal cords. The rate of vibration of the cords is called fundamental frequency (F0) or pitch. The objective of this thesis is to locate pitch period cycles on a cycle-by-cycle basis. The complexity in identifying pitch cycles stems from the highly irregular nature of human speech. Dynamic programming is used to combine two sources of information for pitch period marking. One source of information is the "local" information corresponding to the location …

Effects Of Track Irregularities On Dynamic Responses Of A Moving Maglev Train, Aravind M. Hanasoge

Mechanical & Aerospace Engineering Theses & Dissertations

The Maglev project at Old Dominion University is a collaboration between Old Dominion, American Maglev Technology (AMT), Lockheed Martin, other industry participants and the federal and state governments. This project began at the Norfolk campus in 2002. Under this project, researchers are aiming for a demonstrable engineering prototype that will operate smoothly at speeds of 40 - 45 miles per hour along the 3400 feet long track.

During testing, the vehicle is found to vibrate violently when operated on the ground. Furthermore, the vehicle failed to levitate when operated on the elevated track. As part of the investigation to determine …

Developing A Sensing System For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic: Quarterly Progress Report (July 1 – Sept. 30, 2004), Yingtao Jiang, Bingmei Fu

Transmutation Sciences Materials (TRP)

Dr. Jiang Ma and Mr. Xiaolong Wu worked in LANL between July 1 and Sept. 15 to conduct the experiment. Test of the corrosion of different materials in LBE was performed. The influence of the process of gas introduction to the LBE was studied. Data analysis work was performed based on accumulated data. In the same time, progress has been made in the simulation for transport in oxygen mixing, and one paper was presented in a conference. Another paper was composed and submitted to IEEE International Symposium of Circuits and Systems for the track Chemical Sensors. Preparation of a paper …

High Temperature Heat Exchanger Project: Quarterly Progress Report July 1, 2004 Through September 30, 2004, Anthony Hechanova

Publications (NSTD)

UNLV hosted a meeting on NHI Materials and Heat Exchanger Design on Monday, May 17. Paul Pickard (Sandia National Lab) and Bill Corwin (Oak Ridge National Lab) facilitated the meeting. The purpose of the meeting was to summarize the hydrogen materials and heat exchanger requirements and priorities for UNLV staff and their collaborators to support the research proposal solicitation for the UNLV Research Foundation HTHX program. Attendance was heavier than anticipated and required a change of venue to accommodate the crowd of over 30.

Solvent And Method For Extraction Of Triglyceride Rich Oil, Shubhender Kapila, Paul Ki-Souk Nam, V. J. Flanigan

Chemistry Faculty Research & Creative Works

The present invention relates to a solvent for use in extracting oil from an oil bearing material, such as soybeans, with the solvent resulting in the selective extraction of a triglyceride rich oil, which contains 95% or greater triglycerides and non-polar constituents, with the solvent comprised of a hydrocarbon, preferably hexane, and a fluorocarbon, so that the solvent has a viscosity less than 2.6 centipoise and a polarity of less than 0.1. The present invention also relates to a method of using the solvent to extract the triglyceride rich oil, with the method including preferably extracting the oil at a …

The Benefit Of Using Simulation To Improve The Implementation Of Lean Manufacturing Case Study: Quick Changeovers To Allow Level Loading Of The Assembly Line, Jack J. Mcclellan

Theses and Dissertations

In today's competitive manufacturing environment, companies are constantly looking for ways to improve. Because of this, many companies are striving to become "lean" by implementing lean manufacturing, which is a difficult process. To aid in the implementation of lean manufacturing, simulation was used to reduce the trial-and-error period of lean manufacturing and find to optimum approach to implement the lean manufacturing principle. In this research, a case study of implementing level loading of the production schedule for BullFrog International, L.C. will be examined. To make it possible to implement level loading, the thermo-former machine at the beginning of the operations …

A Review Of Setup Practices And Procedures For Creating Ieee 802.11 Wireless Community Networks, Jae M. Theobald

Theses and Dissertations

IEEE 802.11 wireless networking equipment has made it possible to bridge the last mile for new broadband internet service providers. Inexpensive wireless networking equipment and high gain antennas enable high speed internet delivery at a fraction of the cost of installing or upgrading land lines for cable or DSL services. Based on this research, a guide of general practices and procedures is proposed for designing, installing, and maintaining a reliable wireless community area network. Included tests have provided performance results for several types of wireless antennas (including wire grid parabolic dishes, Yagi and Vagi styles, and echo backfire), wireless bridges, …

Numerical Simulations In Electro-Osmotic Flow, Joseph S. Tenny

Theses and Dissertations

The developing flow field in a parallel plate microchannel, induced by wall motion, has been modeled numerically. This type of flow simulates the physical driving mechanism that exists in electro-osmotically generated flow with large channel diameter-to-Debye length ratios (Z). The physics of the flow field were compared between the moving wall model (MWM) and electro-osmotic flow (EOF) at Reynolds numbers of 1 and 1800, and Z > 2500. Also, Z-values between 50 and 500 were studied to investigate the accuracy of the MWM. Results show that for Z-values greater than 100 the MWM shows good agreement with EOF.

The dynamics of …

An Open Architecture For Versatile Machine And Actuator Control, Michael Scott Baxter

Theses and Dissertations

Automatic control technology increases usability, reliability and productivity in manufacturing, transportation, and climate control. There are many additional areas of modern life that could benefit through automatic control; however, current automation components are too expensive or aren't sufficiently flexible. For example, the cost of current commercial motion control components precludes their use in an average home. This thesis describes an automatic control methodology that is low cost and is flexible enough for a wide variety of control applications. Typical applications could include:

- Home lighting, security and appliances

- Commercial building heating, ventilation and air conditioning

- Industrial machine tool …

Performance And Applications Of Gossamer Wind (Tm) Solar Powered Ceiling Fans, Florida Solar Energy Center, M. Lubliner

FSEC Energy Research Center®

Ceiling fans provide a cooling breeze, reduce temperature stratification and improve thermal comfort. Ceiling fans save energy in homes by improving thermal comfort, which results in changes to the thermostat set-point or reduced use of air conditioning.

Initial Experiments In The Cooperative Control Of Unmanned Air Vehicles, Derek R. Nelson, Timothy W. Mclain, Reed S. Christiansen, Randal W. Beard, David Johansen

Faculty Publications

This paper addresses cooperative control for a team of unmanned air vehicles (UAVs). Specifically, a team of three small UAVs is controlled to perform a cooperative timing mission. Starting at loiter locations distributed around the periphery of a 2 km square battle area, the UAVs cooperatively plan paths to arrive at a target at the center of the battle area in sequence at 10 sec intervals. Cooperative path planning is performed using the methodology of coordination variables and coordination functions. Coordination and waypoint path planning are centralized on a ground station computer. Experiments have been performed using BYU’s fleet of …

Electrostatic Radio Frequency (Rf) Microelectromechanical Systems (Mems) Switches With Metal Alloy Electric Contacts, Ronald A. Coutu Jr.

Theses and Dissertations

RF MEMS switches are paramount in importance for improving current and enabling future USAF RF systems. Electrostatic micro-switches are ideal for RF applications because of their superior performance and low power consumption. The primary failure mechanisms for micro-switches with gold contacts are becoming stuck closed and increased contact resistance with increasing switch cycles. This dissertation reports on the design, fabrication, and testing of micro-switches with sputtered bi-metallic (i.e., gold (Au)-on-Au-(6.3at%)platinum (Pt)), binary alloy (i.e., Au-(3.7at%)palladium (Pd) and Au-(6.3at%)Pt), and ternary alloy (i.e., Au-(5at%)Pt-(0.5at%)copper (Cu)) contact metals. Performance was evaluated, in-part, using measured contact resistance and lifetime results. The micro-switches with …

A Tightly-Coupled Ins/Gps Integration Using A Mems Imu, Jonathan M. Neu

Theses and Dissertations

Micro-Electro-Mechanical Systems (MEMS) technology holds great promise for future navigation systems because of the reduced size and cost of MEMS inertial sensors relative to conventional devices. Current MEMS devices are much less accurate than standard inertial sensors, but they can still be useful. In this thesis, data was recorded from an inexpensive MEMS inertial measurement unit and integrated with GPS measurements using a tightly-coupled Kalman filter. The overall goal of this research is to investigate the usefulness of MEMS sensors for a small, real-time, low-cost INS/GPS integration. A golf cart was used to collect dynamic data, along with a commercial …

Membrane Laminar Wet Electrostatic Precipitator, Hajrudin Pasic, M. Khairul Alam, David J. Bayless

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A laminar flow, wet electrostatic precipitator (ESP) with planar collecting electrodes preferably made of membranes, such as a woven silica fiber. The collecting electrodes are spaced close to planar discharge electrodes to promote laminar flow (Re<2300). Charging electrodes are positioned upstream of the wet ESP to charge the particulate entering the wet ESP to promote collection. The wet ESP is preferably downstream from a conventional turbulent dry ESP for collecting a substantial portion of the larger particulate in the gas stream prior to the gas stream entering the wet ESP.

Photovoltaics: Disaster And Energy Security Applications, Florida Solar Energy Center, William Young

FSEC Energy Research Center®

The modernization of our lives with the use of electronic devices has contributed to a steadily increasing dependence on electric power. The degree of importance of electricity is temporarily highlighted with any type of power outage, whether caused by an accident, a natural disaster or a terrorist attack. A disaster can leave many people without adequate medical services, potable water, electrical service and communications.

There is a value in applying photovoltaics (solar electric) to create disaster-resistant buildings and communities, which is to reduce losses and improve quality of life. Photovoltaics provide a viable source of electric power for energy security …