Engineering Commons^™

Simulations Of A Modified Micro-Scale Electrophoretron, Nada Elmajdoub

LSU Master's Theses

This paper presents theoretical analysis and numerical simulations of a modified micro-scale electrophoretron adapted for cycling reaction applications (PCR, LDR...). The electrophoretron consists of a closed-loop microchannel. If one part of the length of the channel has an electroosmotic mobility of an opposite sign than the remaining part, a continuous cyclic motion of the fluid can be sustained if a potential difference is applied on two electrodes strategically placed along the channel. Conservation of mass leads to the formation of a pressure gradient and a related hydrodynamic flow. Under appropriate combination of design parameters, the combined Electroosmotic -hydrodynamic flow contributes …

Modeling Fabrication And Characterization Of A Bio-Micro Thermoelectric Device For Highly Localized Temperature Control, Aparna Prabhakar

LSU Master's Theses

There is an ever expanding interaction between the fields of micro-electromechanical systems (MEMS) and biology to develop devices to monitor, control and act on living systems. Particularly in the field of cryobiology, there is a need to monitor and control temperature at the cellular level. An important step towards achieving this aim is to fabricate an array of microscale thermoelectric actuators. As a first step for towards achieving such localized control of temperatures in cells and tissues, an array of individually addressable micro-thermoelectric coolers (µTECs) were modeled, characterized, and fabricated. Prefabrication experimentation and modeling were carried out to understand the …

Modeling Of Fiber Reinforced Polymer Confined Concrete Cylinders, Indrani V. Volety

LSU Master's Theses

Fiber Reinforced Polymer (FRP) confined concrete columns have been developed for new construction and rebuilding of concrete piers/piles in engineering structures. Design of these FRP confined concrete columns requires an accurate estimate of the performance enhancement due to the confinement mechanism. Therefore, the key is to develop a confinement model, a model that relates the confined concrete strength with the unconfined concrete strength and the confining pressure provided by the FRP. Due to its closed-form expression and ease of application, design-oriented confinement models predominate in designing FRP confined concrete columns. Design oriented models are directly based on the interpretation of …

Mesoscale Simulation Of Grain Boundary Diffusion Creep In The Presence Of Grain Growth, Lucian Zigoneanu

LSU Master's Theses

Grain-boundary (GB) diffusion creep (Coble creep) is the dominant deformation mechanism for the fine-grained materials under low stress and at elevated temperature. During creep deformation the grains become elongated in the tensile direction because of atoms diffusion along GBs from places in compression to those in tension. Consequently, the GB diffusion rate depends on the normal stress gradient along the boundaries. It is widely accepted that the GB migration generally plays two important roles during Coble creep: one leading to the decrease of the creep rate due to the increase of the grain size by GB migration mediated grain growth …

Design And Test Of A Displacement Workspace Mapping Station For Articular Joints, Michael Daly Guillet

LSU Master's Theses

In 2003, 267,000 Americans received total knee replacements prohibiting high impact athletics for the remainder of a patient’s life. A better understanding of the movement and constraint of the knee is necessary to provide more realistic motion of or possibly eliminate the need for joint prosthetics. Fixed Orientation Displacement Workspaces (FODW) can be applied to study the relationship of the passive constraint system and six (6) degree of freedom (DOF) movement of the human knee. A FODW consists of the volume of possible positions the tibia/fibula can occupy relative to a fixed femur without changing the relative orientation of the …

Integrated Solar Energy And Absorption Cooling Model For Hvac (Heating, Ventilating, And Air Conditioning) Applications In Buildings, Sharizal Shaik Ahmedullah

Dissertations, Master's Theses and Master's Reports - Open

The demands in production and associate costs at power generation through non renewable resources are increasing at an alarming rate. Solar energy is one of the renewable resource that has the potential to minimize this increase. Utilization of solar energy have been concentrated mainly on heating application. The use of solar energy in cooling systems in building would benefit greatly achieving the goal of non-renewable energy minimization.

The approaches of solar energy heating system research done by initiation such as University of Wisconsin at Madison and building heat flow model research conducted by Oklahoma State University can be used to …

The Girl Scout Climbing Wall Multidisciplinary Service-Learning Project, Margaret Pinnell, Corinne M. Daprano, Gabrielle Williamson

Mechanical and Aerospace Engineering Faculty Publications

The Girl Scout Wall (GS Wall) project was implemented in two classes at the University of Dayton (UD): a Mechanical and Aerospace Engineering (MAE) course, and a Health and Sports Science (HSS) course, and Sport Facility Management. The MAE course, Introduction to Materials, is a three-credit, third-year required course where students learn about the basic structure and properties of materials as well as the principles of material selection. The Sport Facility Management course is a three-semester hour, required HSS course where students are introduced to the processes of planning, constructing, equipping, maintaining, and managing sport facilities.

Comparison Of Combustion Sources And Measurement Techniques For Particulates Emitted From Engines And A Power Plant, Matthew F. Chandler

Masters Theses

"Sub-micron particulates emitted from various combustion sources have serious negative impacts on human health and the environment. It is essential to accurately characterize the physical properties of these particulates including size, shape, structure, and chemical composition in order to monitor, regulate, and model the various transport, toxic, optical, chemical, and deposition properties which dictate their harmful effects. This study consists of two related investigations involving the application of diagnostics methods to characterization and comparison of combustion generated particulate emissions from various sources. The first investigation includes the measurement of particulates emitted from a compression-ignition (diesel) engine using two independent measurement …

Emission Cross Sections For Neutral Xenon Impacted By Xe+ And Xe2+, Jason D. Sommerville

Dissertations, Master's Theses and Master's Reports - Open

Ion impact emission cross sections for eleven transitions from the 5p⁵6p configuration to the 5p⁵6s configuration of neutral xenon occurring in the spectral region between 700 nm and 1000 nm have been measured experimentally. Collisions between both singly- and doublyionized xenon and neutral xenon have been studied. These cross sections are of primary use in the development of a spectrographic diagnostic for Hall effect thruster plasma. A detailed discussion of the experimental methods and the subsequent data reduction is included. The results are presented and the importance of these data for spectrographic emission models of Hall …

Heat/Mass Transfer In Rotating, Smooth, High Aspect-Ratio (4:1) Coolant Channels With Curved Walls, Eashwar Sethuraman

LSU Master's Theses

The thesis presents an experimental study of heat/mass transfer coefficient in 4:1 aspect ratio smooth channels with non-uniform cross-sections. Curved leading and trailing edges are studied, for two curvatures of 9.06 m-1 (0.23 in-1) and 15.11 m-1 (0.384 in-1) and for two different curvature configurations. One configuration has curved walls with curvature corresponding to the blade profile (positive curvature on both leading and trailing walls), and the other configuration has leading and trailing walls that curve inwards into the coolant passage (negative curvature on the leading surface and positive curvature on the trailing surface). The experiments are conducted in a …

A Constitutive Model Of The Human Vocal Fold Cover For Fundamental Frequency Regulation, Kai Zhang, Thomas Siegmund, Roger W. Chan

School of Mechanical Engineering Faculty Publications

No abstract provided.

System Identification Of A Pasteurisation Process: A Comparison Of Direct And Indirect Methods, Niel Canty

Theses

The primary focus of this research is to identify a linear model for a direct steam injection (DSI) pasteurisation process which is a component of a large-scale pilot evaporation process widely used in the dairy industry. The pasteurisation process has been identified as a key component of the evaporation process. The author believes that no previously published work has focused on identifying models for a DSI pasteurisation process which makes this work an original contribution to the area. The pasteurisation process can be modelled as a single-input, single-output (SISO) process with a measurable disturbance. Thus two transfer functions were required …

Test 1883: Agco Lt75a Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1873: John Deere 8430 16 Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1880: Mccormick Xtx 185/Mccormick Mtx 165 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1876: Challenger Mt 645b Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1878: Challenger Mt 665b Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1870: John Deere 5103 Diesel 9-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1884: John Deere 8130 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1885: John Deere 8230 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1887: John Deere 8330 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 559: Massey Ferguson 5470 Dyna 4 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Modeling And Fabrication Of A Microthermocouple Array, Adam Cygan

LSU Master's Theses

Cryobiology is the study of how living cells and tissues respond to freezing and exposure to subzero temperatures. Studies in this field are aimed toward improving methods of cryosurgery as well as the storage of cells and tissues. For example, one area of research is to link the biophysical cellular dehydration and intracellular ice formation in cells during tissue freezing to cell viability and mechanical properties after thawing. There is currently a method for measuring dehydration in cells as part of a tissue, but not an adequate method for measuring intracellular ice formation in tissues. A prototype device that would …

Investigation Into The Behavior Of Bolted Joints, Steven M. Page

Browse all Theses and Dissertations

Models to capture the physics of jointed structures have been proposed for over 40 years. These models approximate the behavior of the joint under carefully developed operating conditions. When these conditions change, the model has to be changed. Recent developments in numeric codes like finite elements have created interest in incorporating joint models into the design process but joint models need to represent the joined structure over a broader operating range. This work investigates the dynamic response of a structure with a joint. Isolation of a few dominant effects may give way to a model able to capture a broader …

Computational Study Of Ring-Cusp Magnet Configurations That Provide Maximum Electron Confinement, Taiwo A. Ogunjobi

Browse all Theses and Dissertations

Enhancing the confinement of primary electrons within the plasma in a discharge chamber of an ion thruster improves plasma ionization and consequently the thruster's performance. This work computationally calculates the location, position, and orientation of the permanent magnets that provide a ring-cusp magnetic field that maximizes electron confinement in an axi-symmetric cylindrical aluminum-wall discharge chamber. Small samarium cobalt magnets are circumferentially arranged in a ring around the front, side, or back wall of the chamber. The generated ring-cusp magnetic field for any specified magnet configuration is calculated using MAXWELL2D, a two dimensional electromagnetic field simulation computer code. For various magnet …

Multi-Attribute Optimization Based On Conjoint Analysis, Hemanth K. Amarchinta

Browse all Theses and Dissertations

Over the last thirty years, there were tremendous advances in multidisciplinary design optimization in reducing computational cost, developing algorithms for efficient sensitivity analysis in reaching an optimum. Most of these efforts assumed a single objective (attribute) function and a multitude of constraints. Very little work has been done in including the designer's preferences as part of the optimization scheme and in addressing the ability to handle multiple attributes simultaneously. This need to develop a systematic method for including designer's preferences is the main focus of this research work. The concept of modeling preferences among multi-attribute alternatives is prevalent in consumer …

Using In-Situ Error Tracking For Mode Selection In Proper Orthogonal Decomposition Reduced Order Modelling, Michael Richard Maddux

Browse all Theses and Dissertations

Proper Orthogonal Decomposition (POD) provides a method of analyzing data and/or creating a Reduced Order Model (ROM). In this thesis, POD is used to create a ROM comprised of basis functions onto which the governing equations of a Computational Fluid Dynamics (CFD) problem are projected via Galerkin's method. The model is of reduced order since the basis functions span a space smaller than the space from which they were created. A full order simulation called the training period is conducted first to obtain data to be used for creating the ROM using POD. The dominant characteristics are extracted from the …

Robustness And Control Of A Magnetically Levitated Transportation System, Grzegorz Oleszczuk

Mechanical & Aerospace Engineering Theses & Dissertations

Electromagnetic suspension of Magnetic Levitation Vehicles (Maglev) has been studied for many years as an alternative to wheel-on rail transportation systems. In this work, design and implementation of control systems for a Maglev laboratory experiment and a Maglev vehicle under development at Old Dominion University are described. Both plants are modeled and simulated with consideration of issues associated with system non-linearity, structural flexibility and electromagnetic force modeling. Discussion concerning different control strategies, namely centralized and decentralized approaches are compared and contrasted in this work. Different types of electromagnetic non-linearities are considered and described to establish a convenient method for modeling …

Processing And Characterization Of High Performance Structural Nanocomposites, Dennis C. Working

Mechanical & Aerospace Engineering Theses & Dissertations

Carbon nanotubes are considered to be a revolutionary material breakthrough due to their unique combination of properties. While many applications for SWCNTs have been projected, realization of these potential uses have been hampered by the high cost of limited supplies of high quality SWCNTs and the difficulty in the development of a suitable processing method that does not damage the filler thus diminishing the desirable properties of this material. In spite of these technical challenges, their potential to enable the fabrication of multifunctional materials is being investigated in earnest. The goal of this thesis is to investigate the feasibility of …

E(Fg)2: A New Fixed-Grid Shape Optimization Method, Florin Bobaru Ph.D., Srinivas Rachakonda

Department of Engineering Mechanics: Faculty Publications

We propose a shape optimization method over a fixed grid. Nodes at the intersection with the fixed grid lines track the domain’s boundary. These “floating” boundary nodes are the only ones that can move/appear/disappear in the optimization process. The element-free Galerkin (EFG) method, used for the analysis problem, provides a simple way to create these nodes. The fixed grid (FG) defines integration cells for EFG method. We project the physical domain onto the FG and numerical integration is performed over partially cut cells. The integration procedure converges quadratically. The performance of the method is shown with examples from shape optimization …