Engineering Commons^™

Optimization Of Bio-Briquettes Production From Cassava Stems Co-Blended With Sisal Bole Bagasse Using Response Surface Methodology, Agnes Nshoma Msobi, Neema O. Msuya, Kando Khalifa Janga

Tanzania Journal of Science

This research aimed at producing bio-briquettes from cassava stems and sisal bole bagasse as an alternative source of cooking energy. A Response Surface Methodology (RSM) with Face - Centered Central Composite Design (FCCCD) featured a multi-objective optimization of the effect of the production parameters, focusing on maximizing char yield and Higher Heating Value (HHV) of the produced briquette while minimizing carbonization temperature and residence time. The findings showed that bio-briquettes produced at the lowest temperature (250 ℃) and residence time (30 min) and the blending ratio of 75% by 25% had the highest char yield of 76.92% and HHV of …

Load Profile Analysis And Forecasting For Rural Mini Grids In Uganda, Prossy Mutesi, Santos L. Kihwele, Emmanuel S. Matee

Tanzania Journal of Science

Accurate load forecasting is essential for the reliable and cost-effective operation of rural mini grids, where constrained generation capacity and high penetration of renewable energy resources require well-informed operational decisions. This study examines electricity demand characteristics and forecasting performance for the Buzaami and Ssenyondo mini grids in Uganda, with particular focus on diurnal load profiles, peak demand behavior, and seasonal variability. 2022 operational data show extended peak demand from early morning to late evening, driven by socio-economic activities that strain resource scheduling and reliability management. To address these challenges, the study evaluates and compares Long Short-Term Memory (LSTM) networks, fuzzy …

The Effect Of Mwcnt-Oil Impregnation Of Sintered Components On Their Wear And Corrosion Resistance, Maha Khaled Abdelfadeel

Theses and Dissertations

Powder Metallurgy (PM) offers an advantageous route for manufacturing complex and near net-shape components. Their inherent interconnected porosity that promotes the action of self lubrication compromises their structural integrity by creating pathways for corrosion and excessive wear. This research investigates the efficacy of Multi-Walled Carbon Nanotubes (MWCNTs) as a nano additive within the impregnating base oil (SN-150 base oil). An experimental matrix was designed to evaluate the influence of MWCNTs with different concentrations of 0.05, 0.1, and 0.2 wt.% and ultrasonic dispersion with varying sonication times of 30 and 60 minutes on the tribological and electrochemical performance of sintered steel …

Ontology-Based Decision Support System For Improving Aquaculture Management, Thuy Thi Thu Pham, Phuong Thi Can, Nga Thi Thanh Ha

Journal of Marine Science and Technology–Taiwan

Early detection of shrimp diseases is vital for reducing losses and ensuring sustainable aquaculture. In this study, a novel ontology-driven framework for shrimp disease diagnosis that integrates environmental knowledge with machine learning-based image analysis is proposed. An ontology was constructed from a structured dataset of environmental parameters and farm conditions related to shrimp diseases, which formally represents concepts such as farm characteristics, environmental factors, symptoms, and disease types. Two public shrimp image datasets were subsequently used to train convolutional neural networks (ResNet50 and MobileNetV2) for automated disease classification. The predicted disease labels and confidence scores were mapped onto the ontology. …

Case Study On Operational Performance Improvement By Turbocharger Nozzle-Ring Modification In Shipboard Generators, Jong-Hun Im, Mukyeong Kang, Sang-Deuk Lee

Journal of Marine Science and Technology–Taiwan

Owing to increasingly stringent emission regulations imposed by the International Maritime Organization and rising fuel prices, the demand for enhanced energy efficiency and emission control in marine power systems is increasing. This study presents a case study in which the performance of an aging auxiliary generator is restored by modifying the turbocharger nozzle ring. The vessel, a 12-year-old crude-oil tanker, experienced repeated operational issues with its No. 3 generator. This included elevated exhaust gas temperatures, reduced intake air pressure, and frequent turbocharger surges. To address these challenges, the nozzle-ring blade angle was reduced by approximately 2° using spare components, while …

Towards Sustainable Marine Education: Assessing High School Students’ Understanding Of Conservation Concepts, Cheng-Chieh Chang, Tsuyoshi Sasaki, Ya-Yin Liao, Ling-Ya Hung, Liang-Ting Tsai

Journal of Marine Science and Technology–Taiwan

This study assesses the concepts of marine resource conservation and sustainability among Taiwanese high school students by developing a Chinese version of the Marine Resources Conservation and Sustainability Scale. Grounded in the cognitive, socio-emotional, and behavioral learning objectives outlined in UNESCO’s Education for Sustainable Development Goals (ESDGs), the scale targets students aged 16 to 18 to examine gender differences in marine knowledge and conservation concepts. The scale comprises 31 items across four dimensions: the first section evaluates marine knowledge, while the remaining dimensions utilize a four-point Likert scale to assess cognitive, socio-emotional, and behavioral learning objectives, respectively. The results indicate …

Dynamic Governance Of Transboundary Fisheries Through Deep Learning And High-Frequency Vessel Tracking Data For Climate-Resilient Management: An Application To The East China Sea, Qin Lin, Yaqing Shu, Manel Grifoll, Hongxiang Feng

Journal of Marine Science and Technology–Taiwan

Transboundary fisheries governance is increasingly challenged by jurisdictional conflicts, regulatory asymmetries, and climate-induced stock shifts in fish stocks, especially in contested regions like the East China Sea (ECS). This study capitalizes on China’s high-frequency BeiDou Navigation Satellite System (BDS) data (June 2021–May 2022) to pioneer a CNN-BiLSTM deep learning model to dynamically identify fishing hotspots and evaluate policy effectiveness. By integrating vessel trajectories, environmental variables, and regulatory events, we examine spatiotemporal patterns of fishing effort relative to seasonal bans, extreme weather, and quota systems. Key findings reveal: (1) post-moratorium (September–December) concentration of fishing intensity, peaking in November; (2) significant weather-driven …

Lock Scheduling Decisions And Strategy Optimization Under Operation Interruption Scenarios, Junhe Li, Qiang Zhang, Junpeng Jiang, Jiangchao Bao

Journal of Marine Science and Technology–Taiwan

Locks are critical nodes in inland waterway transportation systems that concentrate vessel traffic between upstream and downstream reaches, making their operations highly sensitive to hydrological conditions. Therefore, disruptions caused by droughts, floods, or routine maintenance can easily trigger congestion. To address this issue, this study systematically examines the interrelationships among the number of ships awaiting passage, scheduling strategies, the trade-off between lock chamber utilization and ship waiting time, the influence of ship entry sequences on user satisfaction, and the combined effects of these factors on overall lock scheduling performance. Based on these analyses, an integrated decision-making model for two-stage ship …

Corrosion Protection Assessment Of Offshore Wind Turbine Substructures Using Beasy Cp Simulation Analysis, Chuan-Yang Wan, Hung-Hua Sheu, Sheng-Yu Wang, Yao-Ming Wang, Wei-De Chen, Ming-Yuan Lin, Hung-Bin Lee

Journal of Marine Science and Technology–Taiwan

This study investigates the corrosion protection assessment of offshore wind turbine substructures established in the waters off Keelung, Taiwan. First, a cathodic protection system for the monopile foundation is designed and established. The Boundary Element Method (BEM) is applied using the BEASY simulation software to develop a 3D geometric model for cathodic protection. In the steel monopile simulation analysis, the exposed marine environment is set based on the sea conditions of the Keelung small boat marina, including parameters such as salinity, resistance, and polarization curves, to establish an effective cathodic protection system for underwater structures. By simulating these parameters, a …

Face-To-Face Versus Distance Education In Competence-Based Maritime Education And Training, Clara Borén, Marcella Castells-Sanabra, Manel Grifoll

Journal of Marine Science and Technology–Taiwan

The COVID-19 pandemic created significant challenges for higher education, with universities being shut down and face-to-face teaching and assessment shifting to an online format. This presented an opportunity to focus on the continuity of learning through distance education, especially in the maritime context, due to the on-board training requirements, and even though five years have passed, this shift has reshaped the education landscape, proving that remote learning has come to stay.

At the Barcelona School of Nautical Studies, we have developed a weather routing software in the framework of distance education and teaching innovation. We conducted a teaching trial alternatively …

A Bibliometric And Visualization Analysis Of Global Giant Clam Research, Chia-Hsiang Chen, Chih-Hsien Chang

Journal of Marine Science and Technology–Taiwan

In this study, bibliometric analysis and visualization tools were used to investigate the academic network and knowledge structure surrounding global giant clam research. A total of 551 relevant publications from the Web of Science database, published from 1900 to 2024, were analyzed. The findings indicate that research on giant clams has experienced considerable growth since 2012, peaking in publication output in 2021. Sixty-six countries were represented in the study sample, with the United States, Australia, China, Singapore, and Japan being the most represented ones. Notably, the rate of international collaboration was only 29%, highlighting a need for additional integrated cross-border …

Adaptive Design Strategies For A Dual-Shaft Pvc Shredder, Gavin Balderas

University Honors Theses

This capstone project involved the design and development of a mid-size plastic shredder, created to process strong, ductile PVC sheets up to ½" thick. This application falls between the capabilities of consumer grade plastic shredders and heavy-duty industrial machines. Over 400 million tons of plastic produced annually and less than 10% of it is recycled; there is an ever-growing need for plastic recycling accessibility and infrastructure. This project aimed to create a compact dual-shaft shredder that can shred thick PVC sheets while being powered by a 120V outlet. Research into blade geometry and orientations aided an iterative design process driven …

Rapid-Prototyping Nanofabrication: Lcd-Based Projection Lithography And Physical Vapor Deposition, Sabeel Saleem Mohammmed

University Honors Theses

The semiconductor industry's continued growth, driven in large part by demand for artificial intelligence hardware, has highlighted the need for greater workforce development in regions adjacent to major fabrication centers like Oregon's Silicon Forest. This capstone project lays the groundwork for a small scale and student led semiconductor fabrication lab at Portland State University by demonstrating two of the core steps in chip manufacturing: photolithography and thin film deposition. Rather than relying on conventional fixed reticles, this work explores a unique, low cost approach to patterning that uses an ultraviolet-compatible liquid crystal display (LCD) as a programmable reticle, allowing arbitrary …

Scalable Flat In-Plane-Motion Mechanical Springs (Sfims) Force Vs Displacement Data, Jared Hunter, Larry L. Howell

ScholarsArchive Data

Force versus displacement data is captured in CSV files for five configurations of Scalable, Flat, In-Plane Motion Mechanical Springs (SFIMS). The five configurations are the Folded Beam Suspension, the Chevron, the Interlaced Chevron, the Canted Triple Folded Beam Suspension, and a Variable Stiffness SFIMS.

Moisture-Induced Degradation And Mechanical Durability Of Mineral-Filled Polylactide (Pla) Composites, Barbara Szaraniec, Aleksandra Ptaszkowska, Alicja Rapacz-Kmita

Journal of Sustainable Construction Materials and Technologies

This study investigates the influence of mineral fillers on the hydrolytic stability and mechanical durability of polylactide (PLA) composites under accelerated aqueous ageing conditions. Composites containing halloysite nanotubes (HNT) and bentonite-based fillers (BM, BS, BSP) at 2 wt.% were prepared using a powder-coating and injection moulding approach. Accelerated hydrolytic degradation was conducted at 50 °C for up to six weeks. The degradation behaviour was evaluated through mass variation, water absorption, incubation medium analysis (pH and electrical conductivity), mechanical testing, surface observations, and contact angle measurements. The results revealed a clear filler-dependent response. Bentonite-filled composites exhibited increased water absorption and accelerated …

Comparative Analysis Of Leaflet Materials, Stent Materials, And Stent Cell Density For Bileaflet Transcatheter Mitral Valve Design, Joseph Chibuike Nwokeafor, Joshua D. Hofmeister, Breandan B. Yeats, Lakshmi Prasad Dasi, Charanjit S. Rihal, Juan A. Crestanello, Leigh Griffiths, Mohamad A. Alkhouli, Hoda Hatoum

Michigan Tech Publications

Background: The biomechanical performance of bileaflet transcatheter mitral valves (TMVs) depends on complex interactions between leaflet material behavior and stent design. However, the contributions of leaflet materials and constitutive models, stent materials, and stent geometry to valve function and durability remain poorly understood. Methods: A parametric finite element study was conducted using a CAD model of a bileaflet TMV subjected to physiological pressure loading. Five leaflet material models were evaluated: 3 glutaraldehyde-fixed tissues—bovine pericardium (BP; FBP1, FBP2) and porcine pericardium (PP; FPP)—and 2 unfixed tissues—bovine (UBP) and porcine pericardium (UPP). BP was modeled as a linear elastic (FBP1) and Ogden …

Applications Of Geosynthetics In Tunnels Construction: A Sustainable Approach To Carbon Footprint Reduction, Ibraheem Rais, Abdullah H. Alsabhan, Md. Rehan Sadique, Shamshad Alam

Journal of Sustainable Construction Materials and Technologies

The use of geosynthetics has transformed tunnelling practices by enhancing structural integrity, durability, and environmental sustainability. This review adopts a systematic literature review design, covering publications from 2000 to 2025 sourced from Scopus, Web of Science, ScienceDirect, and Google Scholar. The selected studies were screened based on relevance, quality, and focus on tunnelling applications, then thematically analyzed into four domains: geosynthetic types, applications, sustainability, and performance evaluation. This review focuses on the applications of various geosynthetics, including geotextiles, geogrids, geocomposites, geocells, and geomembranes, in tunnelling projects. These materials play crucial roles in reinforcing tunnel walls and slopes, improving load distribution, …

A Provable Semi-Infinite Programming Approach For Solving Constrained Dynamic Games, Tyler C. Gardner, Matthew W. Harris, Logan Lancaster

Mechanical and Aerospace Engineering Student Publications and Presentations

Many engineering problems must account for the non-cooperative decisions and actions of multiple players. These problems can be modeled within a game-theoretic framework. The approach herein is to model such problems as mathematical games, convert them to semi-infinite programs, and utilize a semi-infinite program solver whose output is provably an ϵ-optimal Nash equilibrium. The approach is successfully benchmarked on two low-dimensional problems. Two types of higher-dimensional linear quadratic dynamic games are then investigated: ones where each player’s problem is convex and ones where at least one player’s problem is nonconvex. Within each type, variations based on information structure, control …

Mars Rover Wheels And Drive, Presley S. Sacavitch, Ryan W. Trevena, Dylan A. Mack, Daniel Hudak

Mechanical Engineering

Cal Poly’s Poly1Rover team, advised by Professor Rich Murray, aims to deploy four student-designed mini-Mars rovers, each equipped with a sample-tube retrieval claw, before 2030. However, the wheels of Poly1Rover’s current 6th generation rover are not ready for deployment to Mars, as they do not utilize space-grade materials, are not optimized for manufacturability, and lack sufficient spoke compliance to absorb landing and high-impact loads. This project will be developed by a team of Mechanical Engineering students at California Polytechnic State University, San Luis Obispo (Cal Poly): Daniel Hudak, Dylan Mack, Presley Sacavitch, and Ryan Trevena. Next Intent is providing funding …

Formula Sae Planetary Gearbox Characterization Dynamometer, Trevor Marco Toma, Thomas Welden Pierce, Ethan Liu

Mechanical Engineering

This report outlines a custom hub motor dynamometer requested by the Cal Poly Racing FSAE team. The need for this testing platform is to characterize an existing Formula SAE planetary gearbox for a proposed 4WD powertrain. Hub motors, compact electric machines integrated directly into each outboard wheel, offer significant advantages in efficiency, traction, and chassis packaging compared to conventional RWD drivetrains. By mapping torque capacity, efficiency, lubrication method effectiveness, and fatigue life, the team can validate gearbox design and performance.

This senior project group designed and built a dynamometer according to these specifications which will allow for successful testing to …

Table Tennis Training Instrument (Ping Pongers), Derick Alvarado, Peter Sandberg, Andrew Wong

Mechanical Engineering Senior Theses

Table Tennis is an extremely popular sport worldwide, boasting an extensive market. However, it is a sport that generally requires other people to both play and practice with. The goal of this project was to create a machine that would serve table tennis balls for the purpose of individual practice. The machine was meant to fill the niche that other machines of the same type filled by allowing individuals to practice on their own without the assistance of another player or a coach. The main goal of the project was to offer a market competitive device, sharing the same basic …

Nodal Elimination For E3 Hemp Mitigation: A Physics-Informed Graph Theory Approach, Connor A. Lehman, Rush Robinett, Quinnlin R. Lehman, David G. Wilson, Wayne Weaver

Michigan Tech Publications

This paper presents a comparison of methods to determine the minimum number of placement locations for neutral blocking, global linear quadratic regulator (G-LQR), and local linear quadratic regulator (L-LQR) controllers throughout a power grid to prevent transformer saturation during the onset of an E3 high-altitude electromagnetic pulse (HEMP) disturbance. Different device placement configurations yield different efficacies in E3 HEMP mitigation. The first placement method discussed is a genetic algorithm (GA), which serves as a baseline optimizer test case. The scaling and run time of the GA depend on the complexity of the objective function and often times becomes intractable as …

A Comparative Study Of Model Predictive Control And The Stanley Method For Vehicle Path Tracking Applications, Noah S. Fitzgerald

Master's Theses

This thesis compares a model predictive controller (MPC) and a lateral Stanley controller for vehicle path-tracking applications under simulation-based and perception-driven operating conditions. Both controllers were evaluated in simulation using a nonlinear dynamic bicycle model executing single and double lane change maneuvers. Following simulation-based evaluation, both controllers were implemented on hardware within a perception-driven steering-control pipeline. This pipeline utilized recorded sensor data from the MXcarkit 1/8^th-scale autonomous vehicle platform, incorporating lane instance segmentation and homography-based roadway estimation.

Under idealized simulation conditions, the MPC demonstrated improved trajectory-tracking performance during aggressive maneuvers while requiring greater steering activity and computational effort …

Integrating Sustainability Into Engineering Education, Riley R. Moller

Master's Theses

Engineering decisions shape lasting technology that affects environmental integrity, public safety, economic stability, and social equity. As global challenges such as climate change, infrastructure vulnerability, and rapid technological advancement intensify, the responsibilities placed on engineers continue to expand. Sustainability provides a framework for addressing these interconnected pressures through systems-based design and long-term thinking. Yet, sustainability education within engineering programs remains unevenly integrated, often positioned as elective or peripheral rather than as a foundational component of professional preparation.

Prior research shows that sustainability is most frequently addressed through stand-alone courses rather than embedded across required curricula, reflecting disciplinary structures that prioritize …

Improving The Reliability And Performance Of A Supersonic Indraft Tube Wind Tunnel, Christian J. Kaml

Master's Theses

Access to supersonic testing is increasing in demand, and wind tunnels remain one of the safest and most cost-effective methods for gathering high-speed flow data. Despite being more economical than alternative options, supersonic wind tunnel facilities often require substantial investment to construct, operate, and maintain.

The novel indraft tube tunnel architecture was conceived as a high-speed flow testbed that incorporates features of both Ludwieg tubes and indraft wind tunnels to maintain costs low enough to be accessible even to small universities. This design was first developed and tested in 2018 at California Polytechnic State University, featuring a cost per test …

A Novel Hexagonal-Zigzag Cellular Infill Structure For Additive Manufacturing, Md. Saidur R Roney, Amm Nazmul Ahsan, Prosenjit Barua

Manufacturing & Industrial Engineering Faculty Publications

The rigidity of the Additively Manufactured objects can be tailored by manipulating the infill lattice type and density. In this research, an island type novel infill structure termed as Hexagonal-Zigzag pattern is introduced, and its mechanical performance is investigated. In this pattern, the zigzag raster reflects the repeating hexagonal shaped cell constituting the parallel-oriented islands and 90° rotation of the pattern in each layer distributes the island span along both transverse and longitudinal directions of the printing contour. A mathematical model is established to illustrate the effect of the infill parameters on hexagon unit cell size and relative infill density. …

Rehab Mechanics, Sierra Spierling, Nicole Garcia, Joel Gonzalez, Diana Garcia-Becerra, Mia Kwan

Mechanical Engineering Senior Theses

Stroke survivors often struggle to regain grip strength and hand mobility due to limited access to physical therapy, lack of progress tracking during independent rehabilitation sessions, and reduced motivation from slow or unmeasured progress. There is a need for more effective rehabilitation approaches, as current at-home strengthening tools do not provide quantitative feedback or adjustable resistance, and clinical devices are expensive. This makes it challenging for patients and their physical therapists to guide recovery and monitor improvement effectively. To address these obstacles, we developed a low-cost, customizable grip-strengthening device that tracks patient progress and assists in regaining strength and mobility …

Bowl-O-Matic, Nathan Lin, Luis Torres, Jill Worthington, Aiden Foote

Mechanical Engineering

Adaptive physical education presents the unique challenge of accommodating individuals with diverse physical and cognitive abilities. Instructors and program designers must often integrate specialized equipment, fixtures, or features to ensure activities remain safe, inclusive, and user-friendly. Beyond accessibility, adaptive physical education highlights the importance of empowerment— enabling every participant to experience personal growth, confidence, and connection through movement. Friday Club, a local San Luis Obispo program supported by Cal Poly’s Kinesiology Department, embodies these values by providing adaptive physical activities that promote health and well-being for individuals with varying abilities. One of the most popular and regularly held activities is …

Cosmetic Clamper, Daniel Peter Gates, Bruno Roberto Martinez, Samantha Remy, Zachary Joseph Roeber

Mechanical Engineering

Cosmetic Clamper Mechanical Engineering Senior Project was a senior project at California Polytechnic State University, San Luis Obispo in the College of Engineering, Mechanical Engineering Department. The project ran from September 2025 to June 2026. The project developed the Cosmetic Clamper device, an accessibility product designed to help individuals with unilateral upper extremity motor deficits open, use, and close cosmetic containers independently.

Me3329 Modular Phonograph Gearbox, Garrett Andrik Leighton, Preston Robert Hupe, Gavin Carter Ebner, Andrew Renato Reyes

Mechanical Engineering

The Mechanical Engineering Department at California Polytechnic State University, San Luis Obispo (Cal Poly), seeks to develop a laboratory tool allowing students to reinforce concepts of gears for Mechanical Systems Design (ME329). Some current laboratories do not provide students with hands-on interaction, and the department lacks equipment and documentation to support a standardized lab. With ME329 expanding from ten to fifteen weeks, there is an opportunity to create a physical gearbox design lab allowing students to reinforce lecture material in engaging ways, while standardizing student learning. This senior project is presented and sponsored by Professor Alan Zhang. It will be …