Engineering Commons^™

Green Shipping Corridors In West Africa : Overcoming Barriers And Unlocking Opportunities For Maritime Decarbonization, Bismark Owoahene Acheampong

World Maritime University Dissertations

No abstract provided.

An Analysis Of The Legal And Policy Challenges For Developing Countries In Implementing The Imo’S 2023 Ghg Strategy : A Case Study Of South Africa And Indonesia, Mduduzi Godson Qwabe

World Maritime University Dissertations

No abstract provided.

Preparedness And Response To Oil And Biofuel Spills : A Case Study Of The Western Indian Ocean, Soifoine Abdillah

World Maritime University Dissertations

No abstract provided.

Techno-Economic Analysis Of Hybrid Pv-Wind-Diesel Generator Swarm Grid For Rural Electrification In Tanzania, Ibrahim Mwammenywa

Tanzania Journal of Engineering and Technology (TJET)

Remote, rural, and off-grid communities, particularly in Sub-Saharan Africa (SSA), face significant challenges in securing reliable and affordable electricity. While solutions such as solar home systems (SHSs) and diesel generators (DGs) have been adopted by some individuals, their deployment is often not optimized to meet the full load demand. This study addresses this challenge by proposing a hybrid swarm grid (HSG) design that integrates photovoltaic (PV), wind energy, and diesel generators (DGs). Utilizing MATLAB/Simulink and HOMER, the HSG is modeled and optimized for a typical SSA village, incorporating real-world variables such as load demand profiles, solar irradiance, and wind patterns. …

Adoption Of Agrivoltaics In Developing Countries: A Review On Challenges, Opportunities And Future Prospects, Abdi J. Athumani, Pater Makolo

Tanzania Journal of Engineering and Technology (TJET)

This paper provides a review of agrivoltaics technology and how it has been applicable in developing countries, including African countries. Agrivoltaics, the integration of agricultural production with photovoltaic energy generation, offers promising solutions to water- energy-food nexus in developing countries. This technology offers the dual benefit of increasing agricultural productivity while generating clean energy, which is very important for regions facing frequent electricity shortages and declining agricultural yields due to climate change. However, despite its potential, the adoption of agrivoltaics in developing nations remains limited in comparison to developed countries due to financial, technical and policy constraints. This paper explores …

Impact Of Non-Uniform Surface Temperature On The Apparent Radiative Properties Of Cavity Receivers, Ehsan Mofidipour, Matthew R. Jones, Brian D. Iverson

Faculty Publications

Radiative surface properties play a critical role in the design, analysis and optimization of solar–thermal systems. Cavity receivers increase the efficiency of solar–thermal energy systems through the cavity effect. The cavity effect refers to increased absorption of radiation due to multiple reflections within a cavity. Apparent radiative surface properties of a cavity characterize the effective interactions of radiation passing through an imaginary surface covering the cavity aperture. In this study, we investigate the extent to which the apparent emissivity of a cavity with a non-uniform surface temperature profile may be estimated using an isothermal enclosure model. A cylindrical cavity was …

Incorporating Industry-Standard Technical Writing Into A Materials Testing Laboratory, Caleb Levi Head

Theses and Dissertations

The fluid analysis and materials testing laboratories are crucial for engineering students to learn experimental procedures and data interpretation. Engineers spend a significant portion of their workday on report writing, yet many feel their undergraduate education did not adequately prepare them for this task. At the University of Arkansas at Little Rock, students were given an industry-influenced lab report template to expand their knowledge of the necessary information required in technical writing, thereby teaching and improving their technical writing skills actively. These reports were evaluated qualitatively and quantitatively against previous submissions over two semesters in the mechanical engineering fluids and …

Solar Absorption Cooling Systems – A Case Study In Egypt, Hesham Safwat, Iman El-Mahallawi

Mechanical Engineering

Climate change with Egypt’s increasingly hot weather and plans towards energy transition, addressing an approach for clean HVAC (Heating, Ventilation, and Air Condition) solutions is becoming requisite. This paper examines the potential of utilizing solar absorption cooling systems in institutional buildings by presenting a case study of a proposed solar absorption cooling system for a library building with an area of 4402 m2, located at the British University in Egypt. The proposed solution is to replace 30% of the existing conventional air conditioning units with a hot-water driven single-effect absorption chiller powered by solar thermal vacuum tube solar collectors, coupled …

Identification Of Barriers And Drivers In The Adoption Of Sustainable Construction Practices In The Turkish Construction Industry: Exploratory Factor Analysis, Tülay Çivici, Mustafa Serhan Ünlütürk

Journal of Sustainable Construction Materials and Technologies

Although the importance of sustainability in the construction industry has been emphasised by many researchers and endorsed by many authorities, it is clear that the practices in the industry still need to be improved. The primary issue for adopting sustainable practices in the construction industry is identifying the barriers and drivers. For this reason, the study analysed the literature to identify the critical barriers and incentives for adopting sustainable practices in the construction industry. In light of the information from the literature, the necessary barriers and motivators in adopting sustainable practices in the construction industry were determined, and a questionnaire …

Strategies For Overcoming Product Certification Challenges Faced By Food Manufacturing Small And Medium Enterprises In Tanzania, Peresi M. Bulemo

Tanzania Journal of Engineering and Technology (TJET)

Small and Medium-sized Enterprises (SMEs) in Tanzania face significant regulatory challenges within bureaucratic, costly, and centralized environments. These challenges contribute to an increase in unregistered enterprises and substandard products in the market. This study aimed to address the challenges SMEs encounter in obtaining product certification to improve their product quality and market competitiveness. A mixed-methods approach was employed, combining qualitative and quantitative research through surveys, interviews, and document analysis, with respondents from the Tanzania Bureau of Standards (TBS), Small Industries Development Organization (SIDO), and SMEs in the food manufacturing sector. Data analysis was conducted using SPSS and JASP. Findings revealed …

Prospects Of Clean Cooking Energy In Africa - Transition Pathways And Implications, Joseph H. Kihedu Dr.

Tanzania Journal of Engineering and Technology (TJET)

Despite abundant renewable energy resources, African countries still suffer from energy poverty, particularly in cooking. Up to 2022, about 74% of the African population had no access to clean cooking energy. With focus to Sub-Saharan African population, 90% has no access to clean cooking energy which decrease by 7% when kerosene is included. Traditional cooking, which involves the use of charcoal and firewood, is associated with health problems, environmental degradation, socioeconomic issues, and gender inequality. Transitioning to clean cooking energy not only promises significant health benefits but also offers opportunities for sustainable economic development and environmental preservation. In this study, …

Towards Metrology 4.0 In Developing Countries’ Manufacturing Industries, Jailos Nzumile

Tanzania Journal of Engineering and Technology (TJET)

A systematic literature review was conducted to unveil the status of the digital transformation of metrology in developing countries, as they are lagging in utilising fourth industrial revolution (IR4.0) technologies to transform manufacturing industries. A PRISMA technique was employed using various keywords to identify, screen, and select the relevant literature. Forty publications were selected for the review, mainly discussing IR 4.0 technologies in metrological operations. The results indicate that the digital transformation of metrology has yet to be initiated in developing countries. However, the employment of IR4.0 technologies in advancing metrological operations in manufacturing industries is mostly discussed in the …

Fuzzy Logic-Based Decision Support System For Adoption Of Industry 4.0 Predictive Maintenance By Manufacturing Industries, Fred E. Peter

Tanzania Journal of Engineering and Technology (TJET)

In the context of Industry 4.0, predictive maintenance enhances operational efficiency by optimizing processes, minimizing downtime, and improving cost-effectiveness. However, implementing predictive maintenance requires a systematic approach due to its complexity. This study collected expert input from 15 food and beverage manufacturing industries located in Dar es Salaam, Tanzania, using a purposive sampling technique. Six representatives were selected from each industry, and their opinions were analyzed using MATLAB 7.6 through a fuzzy logic inference system. The analysis focused on key factors influencing Industry 4.0 technology adoption for predictive maintenance, including adoption intention (strategic decision, equipment data, perceived benefit) and perceived …

Potential Use Of Pump As Turbine Coupled To Self-Excited Induction Generator For Micro-Hydro Cooking And Cooling Applications, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

Clean cooking and efficient cooling in developing countries have recently become areas of great focus. Further, the environmental impact of flooding in high-capacity hydroelectric plants has become a major concern. As a result, there is growing emphasis on developing sustainable and decentralized energy solutions, focusing on the potential of micro-hydro systems, especially in rural and remote areas. Although there are several alternative energy generation methods, their application is not straightforward. One of the latest technologies under research is using pumps as turbines coupled to an induction generator. This paper explores through a rigorous experimental approach the possibility of using a …

Fuzzy-Ahp Based Decision Support System For The Selection Of Optimal Maintenance Strategy For Meter Gauge Railway Infrastructure: A Review, Hamisi J. Maulid

Tanzania Journal of Engineering and Technology (TJET)

There are many uncertainties and complexities associated with maintaining Meter Gauge Railway (MGR) infrastructure, which calls for a methodical approach to decision-making. The development and application of a fuzzy-AHP-based decision support system (DSS) to select the optimal maintenance strategy for the MGR are presented in this study. The review covers research from 2013 to 2023 and focusses on the use of Multi-Criteria Decision Making (MCDM) and Fuzzy Analytic Hierarchy Process (Fuzzy-AHP) techniques in railway infrastructure maintenance. To manage the inherent uncertainties and subjective judgements involved in maintenance decision-making, the Fuzzy-AHP methodology combines fuzzy logic with the Analytic Hierarchy Process (AHP). …

The Impacts Of Renewable Energy Sources: A Review On Grid Inertia And Frequency Regulation, Sospeter Gabriel

Tanzania Journal of Engineering and Technology (TJET)

The power system is gradually transitioning into low inertia due to integrating substantial intermittency quantity of converter-based renewable energy sources, such as wind and photovoltaic power, into the current power grid network. This integration presents significant inertia and frequency control challenges to the network as a result of a decrease in the percentage of synchronous generators. Moreover, faster frequency deviations are posed by the mismatch between the supply and demand during contingencies, which creates difficulties in preserving the frequency stability of the power system. This research explores the impacts of renewable energy sources (RESs) on grid inertia and frequency management …

Calibration Of Measurement Tools In The Experimental Test Rig For Hydropower Performance Evaluation, Ombeni J. Mdee

Tanzania Journal of Engineering and Technology (TJET)

The demonstration of a typical hydropower plant requires the development of a test rig with the installation of tools to measure the performance parameters. The measurement tools require a calibration process to improve the quality of recorded data. This study involved the calibration of traditional and automated measurement tools connected to the hydropower test rig through an Arduino microprocessor. The automated measurement tools included a pressure transducer, flow meter, digital tachometer, and torque transducer, while traditional measurement tools, including a pressure gauge, concrete water tank, contact tachometer, and force lever arm balance, were connected in the same test rig during …

Review On Gas-To-Liquids Conversion Technology: Lessons From Case Studies And Potential Strategies For Implementation In Tanzania, Joseph H. Kihedu

Tanzania Journal of Engineering and Technology (TJET)

This review paper explores the transformative potential of Gas-to- Liquids (GTL) technology for harnessing Tanzania's vast natural gas resources. With significant discoveries of natural gas reserves totalling up to 57 Tcf in fields such as Songosongo, Mnazi Bay, Block 1, 2, 3 and 4. Tanzania is positioned to leverage GTL technology to convert these resources into high-value liquid fuels like gasoline, diesel and naphtha. Review of GTL process, its products and applications has been done. By analysing successful GTL projects globally and drawing lessons applicable to Tanzania, this paper provides strategic recommendations for policymakers and stakeholders to foster GTL development. …

Root Cause Analysis Of Performance Degradation For An Xyz Thermal Power Plant In Tanzania, Simon I. Marandu

Tanzania Journal of Engineering and Technology (TJET)

Thermal power plants in Tanzania have been experiencing performance degradation, typically arising from component and subsystem failures, which contribute to power system instability and unreliability. This paper presents a case study of the root causes of performance degradation of an XYZ thermal power plant. The study was conducted by reviewing plant documentations, including maintenance and operational data logbooks, and by standardising the approach through the adoption of ISO 14224:2016 for maintenance and reliability data exchange. Data evaluation was carried out using principal component analysis and scree plot analytical techniques to enhance the depth and accuracy of root cause identification. Additionally, …

Investigation The Effect Of Integrating Solar Desalination Systems With Firefighting Networks For Coastal Cities, Ramy Elramy, Mohamed Mahgoub, Mohamed Abdelgaied, Ayman Refat Abd Elbar

Journal of Engineering Research

This study investigates integrating solar desalination systems with seawater-based firefighting networks as a sustainable solution for coastal cities facing freshwater scarcity. This study evaluates technical feasibility, economic impact, and operational performance by comparing conventional seawater firefighting infrastructure with systems utilizing desalinated water produced via solar energy. The methodology includes a detailed component and cost analysis of both systems, supported by experimental pump performance tests using varying salt concentrations and seawater. Results indicate that desalinated water systems offer significant economic savings—approximately 48.82%—due to reduced corrosion, lower maintenance demands, and improved pump efficiency. Experimental findings also show that increased salinity accelerates cavitation …

Kinetic, Wind-Driven Metal Sculpture, Irene Songhee Han, Aiden Brown Largay, Madeline Vang Xiong

Mechanical Engineering

The Interdisciplinary Senior Design Team “Flying Flora” from Cal Poly’s College of Engineering has been tasked with designing and building a wind-driven dynamic metal sculpture for the San Luis Obispo Botanical Garden. The botanical garden wants to fill a large, centrally located vacant space with a kinetic sculpture to attract and welcome visitors. The final design, as approved by the garden’s directors, features a large metal California poppy below a stained-glass and metal butterfly. The flower rotates smoothly in typical wind conditions, drawing the attention of visitors to the sculpture. The butterfly is stationary, positioned at an angle from the …

Air To Water Capture In Support Of Un Sustainable Development Goals, Jordan Macconnell, Michael Tiscareño, Ari Dennis, Baxter Mercy

Mechanical Engineering

This senior project explored the use of thermoelectric cooling for atmospheric water capture. The system was designed to cool aluminum condensing surfaces below the dew point using Peltier modules, with forced convection heat sinks on the hot side. The purpose of this system was to gather reliable amounts of water for various water-scarce areas around the world to help meet the UN's sixth Sustainable Development Goal.

The final design of this project consisted of a 1.5 x 1.5 x 2 foot frame made of acrylic panels and insulation. Within the frame, the thermoelectric system was constructed using Peltier modules with …

A Critical Realist Erp Implementation In Zimbabwean Mining Industry Organisations, Jairos Mukwenha

Tanzania Journal of Engineering and Technology (TJET)

This research uses a critical realist framework to examine the factors influencing the success of enterprise resource planning (ERP) system implementation in Zimbabwean mining industry organisations. From the perspective of critical realism, the mining industry in Zimbabwe faces a complex interplay of opportunities and obstacles while implementing ERP systems. The deployment of ERP in mining firms is critically examined in this paper, emphasising how these systems might improve operational efficiency while considering Zimbabwe's particular socioeconomic circumstances. By exploring underlying structures, mechanisms, and outcomes, the research aims to identify critical challenges and opportunities and develop practical recommendations for improving ERP adoption …

Clustering Mini-Grids To Enhance Power Systems Reliability In Distributed Generation, Santos Kihwele

Tanzania Journal of Engineering and Technology (TJET)

This study investigates the effectiveness of clustering mini-grids as a method to improve the reliability and operational stability of distributed generation systems in remote areas, particularly where renewable energy sources are predominant. As renewable resources like solar and wind are increasingly integrated into mini-grids, these systems face various challenges, particularly in maintaining stable voltage and frequency across interconnected networks. Such issues are compounded by the intermittent nature of renewable energy sources and the lack of extensive communication infrastructure in rural or resource-constrained settings. To address these control challenges, this study applies droop control techniques to two mini-grids in Uganda, utilizing …

Factors Affecting Adoption Of Industry 4.0 Predictive Maintenance By Manufacturing Industries: Tanzania Food And Beverage Manufacturing Industries, Fred E. Peter

Tanzania Journal of Engineering and Technology (TJET)

Industry 4.0 has increasingly become a focal point of scholarly inquiry. Nonetheless, there remains a noticeable lack of comprehensive research on the diverse and systematic factors that influence the adoption of Industry 4.0 Predictive Maintenance (PdM 4.0) in manufacturing sectors within developing regions, particularly in East Africa. This study seeks to bridge this research gap by investigating the key determinants affecting the actual implementation of PdM 4.0 in Tanzania’s food and beverage manufacturing industries. To achieve this objective, a mixed-methods research design was adopted, combining both qualitative and quantitative approaches. Qualitative data were obtained through in-depth interviews with ten industry …

How Can The Adoption Of Biodegradable Packaging In The Beverage Industry Specifically Contribute To Reducing Single-Use Plastic Waste, And What Regulatory Or Cost-Related Challenges Hinder Its Widespread Implementation In Developing Countries?, Rebecca Aba Gaisie

2025 Awards for Excellence in Student Research and Creative Activity - Documents

This research investigates the potential of biodegradable packaging to reduce single-use plastic waste in the beverage industry and explores the regulatory and cost-related barriers to its adoption in developing countries. The beverage sector is a major contributor to global plastic pollution, and biodegradable alternatives offer a promising path toward sustainability. Using a mixed-methods approach, this study combines qualitative interviews with industry experts and case studies of businesses implementing biodegradable solutions, alongside quantitative survey data from 100 manufacturers and 200 consumers across Africa, Asia, and Latin America. Findings reveal that while biodegradable packaging significantly reduces plastic waste and appeals to environmentally …

Rotating Burlap For Improved Solar Still Performance: An Experimental Investigation, Alsaied Khalil, Mohamed Abdelgaied, Amir Nasr

Journal of Engineering Research

This experimental study investigates the performance of a modified solar still that utilizes a rotating burlap cloth to enhance water evaporation and productivity. Conducted in Tanta, Egypt within a hot desert climate, the system was designed with a 31° angle to maximize solar energy absorption. A 12V DC motor was employed to maintain continuous rotation of the burlap, ensuring consistent contact with the water surface and promoting enhanced evaporation. The modified system achieved a peak water temperature of 89.4°C, resulting in a total water output of 1.547 liters per day, which translates to 4.56 liters per square meter per day—an …

Conference Report Of Wmu Maritime Affairs Conference 2025 : Transforming A Maritime Future : Digitalization And Decarbonization, World Maritime University

Conference Papers

No abstract provided.

Integrating Medical Plastic Waste Pyrolysis And Circular Economy For Environmental Sustainability, Attia Attia, Mohamed Bassyouni Prof., Reem Nasser Eng., Moataz El-Bagoury Eng., Islam Shaker Eng., Yasser Elhenawy Prof., Dina Aboelela Dr.

Biochemical Engineering

A critical assessment of pyrolysis technologies and reactor designs was discussed, highlighting various reactor configurations. This study explored the influence of catalysts, temperature, heating rate, and residence time on the pyrolysis process, and addressed their effects on product distribution and composition. Safety considerations and strategies for mitigating the potential environmental impacts of pyrolysis were presented. Comparative analyses of the environmental impacts of traditional waste disposal methods versus pyrolysis-based approaches provided insights into the potential reduction of greenhouse gas emissions and other pollutants. The circular economy approach was explored in the context of medical plastic waste pyrolysis. The potential for closing …

Overseas Agent Selection For International Logistics Companies: A Case Study, Hung-Ta Lin, Hua-An Lu

Journal of Marine Science and Technology–Taiwan

International logistics companies (ILCs) have aggressively participated in the supply chain systems of production industries as part of global trade development. They have adopted diversified and multinational models by expanding their overseas services to align with the various characteristics of regional economic patterns. Assigning specific local agents for their forwarding operations has been one of the key strategies for overseas services. Notably, the performance of these selected agents has significantly influenced service quality in their respective regions. In collaboration with the top management of an ILC, this study proposes an evaluation framework comprising 4 criteria and 16 subcriteria for selecting …