Engineering Commons^™

Predicting Young’S Modulus Of Nanowires From First-Principles Calculations On Their Surface And Bulk Materials, Guofeng Wang, Xiaodong Li

Faculty Publications

Using the concept of surface stress, we developed a model that is able to predict Young’s modulus of nanowires as a function of nanowire diameters from the calculated properties of their surface and bulk materials. We took both equilibrium strain effect and surface stress effect into consideration to account for the geometric size influence on the elastic properties of nanowires. In this work, we combined first-principles density functional theory calculations of material properties with linear elasticity theory of clamped-end three-point bending. Furthermore, we applied this computational approach to Ag, Au, and ZnOnanowires. For both Ag and Aunanowires, our theoretical predictions …

Edge-Stress Induced Warping Of Graphene Sheets And Nanoribbons, Ashwin Ramasubramaniam, Y. Zhang, C. Reddy, V. Shenoy

Mechanical and Industrial Engineering Faculty Publication Series

We show that edge stresses introduce intrinsic ripples in freestanding graphene sheets even in the absence of any thermal effects. Compressive edge stresses along zigzag and armchair edges of the sheet cause out-of-plane warping to attain several degenerate mode shapes. Based on elastic plate theory, we identify scaling laws for the amplitude and penetration depth of edge ripples as a function of wavelength. We also demonstrate that edge stresses can lead to twisting and scrolling of nanoribbons as seen in experiments. Our results underscore the importance of accounting for edge stresses in thermal theories and electronic structure calculations for freestanding …

A Three-Dimensional, Time-Dependent Circulation Model Of Utah Lake, Eric V. Callister

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Spatial and temporal variations of Utah Lake’s flow field were modeled using the Estuary Lake and Computer Model from the Centre for Water Research (CWR-ELCOM) at the University of Western Australia as part of an effort to increase understanding of the lake’s natural processes in order to restore the lake to its pristine, clear-water state and preserve the habitat of the June sucker, an endangered species. The model was validated using temperature measurements taken by sensors in 2007. The water temperature was a strong function of air temperature and incident short wave radiation, and was influenced to a lesser degree …

Hydrogen Production Using Geothermal Energy, Theodore Wayne Hand

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

With an ever-increasing need to find alternative fuels to curb the use of oil in the world, many sources have been identified as alternative fuels. One of these sources is hydrogen. Hydrogen can be produced through an electro-chemical process. The objective of this report is to model an electrochemical process and determine gains and or losses in efficiency of the process by increasing or decreasing the temperature of the feed water. In order to make the process environmentally conscience, electricity from a geothermal plant will be used to power the electrolyzer. Using the renewable energy makes the process of producing …

An Object-Oriented Approach For Modeling And Simulation Of Crack Growth In Cyclically Loaded Structures, D. Cojocaru, Anette M. Karlsson

Mechanical Engineering Faculty Publications

We present an object-oriented modeling frame for simulating crack propagation due to cyclic loadings. Central to the approach is that the crack propagates when a user-defined propagation criterion is fulfilled, i.e., the crack propagation rate is not prescribed but predicted. The approach utilizes the commercial finite element software package ABAQUS and its associated Python based scripting interface. The crack propagation is simulated by a generalized node release technique. If the propagation criteria are satisfied in the end of a cycle, the crack is allowed to propagate. The incremental crack growth is inferred from an iterative investigation of the propagation criteria. …

Atomistic-Based Finite Element Simulation Of Carbon Nanotubes, Yang Yang

Dissertations

Since first found in the form of multi-walled carbon nanotubes (MWNTs) by Iijima(1991), carbon nanotube (CNT) for its outstanding and unique properties have gained overwhelming attentions from across the spectrum of the science and engineering fields. CNTs are structurally perfect, small size, low density, high stiffness, high strength (Qian et al., 2002), and their electronic properties depend on the particular distortion as well as the initial tube diameter and chirality, ranging from narrow-gap or moderate-gap semiconducting to metallic (Pantano et al., 2004b), which can be utilized in nanoscale sensors and devices. These appealing characteristics provide strong drives for the possible …

Holographic Fabrication Of Photonic Crystals Using Multidimensional Phase Masks, Yuankun Lin, Ahmad Harb, Daniel Rodriguez, Karen Lozano, Di Xu, K. P. Chen

Mechanical Engineering Faculty Publications and Presentations

This paper reports the experimental approaches to the fabrication of two-layer integrated phase masks and the fabrication of photonic crystal templates using the phase mask based on holographic lithography technique. The photonic crystal template is formed by exposing photoresist mixtures to five-beam interference patterns generated through the phase mask. The fabricated phase mask consists of two layers of orthogonally oriented gratings produced in a liquid crystal and photoresist mixture. A polymerization-induced phase separation preserves the grating structure during the exposure. The vertical spatial separation between two layers of gratings produces a phase difference among diffracted laser beams, which enables the …

Experiments And Models For The Thermal Response Of Railroad Tapered-Roller Bearings, Constantine Tarawneh, Kevin D. Cole, Brent Wilson, Fadi Alnaimat

Mechanical Engineering Faculty Publications and Presentations

The need to understand and quantify the heat transfer paths within tapered-roller bearings is of great importance in the railroad industry since bearing cup temperature measurement is the primary tool utilized in the removal of distressed bearings from service. Experiments were performed to acquire temperature histories at several locations on a stationary bearing subjected to heat sources imbedded in two rollers. The experimental results were compared to zero- and first-order thermal models to estimate overall heat transfer coefficients from the bearing. The results presented here can be used to explain some of the mechanisms that lead to overheating of tapered-roller …

Generation And Analysis Of Fcg Data Using A Single Specimen And Kmax - ∆K Testing Matrix, Sree Phani Chandar Reddy

Masters Theses

A custom method to generate fatigue crack growth (FCG) data requires testing of multiple specimens at different load ratios. In addition, it includes the application of a load shedding procedure from pre-cracking level to threshold.

In this thesis, a novel method of testing has been investigated that utilizes a single specimen and a testing matrix in terms of K_maxand ∆K values corresponding to predetermined R-ratios for which FCG data, da/dN, are recorded. Automatic K-controlled tests on 2324-T39 Al alloy were conducted using the ∆K increasing and ∆K decreasing procedures while K_maxwas kept constant. Results show that …

Edge-Stress Induced Warping Of Graphene Sheets And Nanoribbons, Ashwin Ramasubramaniam, Y. W. Zhang, C. D. Reddy, V. B. Shenoy

Ashwin Ramasubramaniam

Diagnostic Analysis Of A Small-Scale Incinerator By The Garson Index, Wei-Hsin Chen

Wei-Hsin Chen

No abstract provided.

Design And Testing Of A Pumpless Microelectromechanical System Nanoinjector, Quentin Theodore Aten

Theses and Dissertations

A deeper understanding of human development and disease is made possible partly through the study of genetically modified model organisms, such as the common mouse (Mus musculus). By genetically modifying such model organisms, scientists can activate, deactivate, or highlight particular characteristics. A genetically modified animal is generated by adding exogenous (foreign) genetic material to one or more embryonic cells at their earliest stages of development. Frequently, this exogenous genetic material consists of specially engineered DNA, which is introduced into a fertilized egg cell (zygote). When successfully introduced into the zygote, the exogenous DNA will be incorporated into the …

Ecad To Mcad Interoperability For Automated Enclosure Design, Adam C. Wilcox

Theses and Dissertations

Enclosure design is the process of creating a package that will support and protect enclosed circuitry. Electronic enclosures are used in almost all industries, such as aerospace, automotive, naval, computer, toy, etc. Many designers use computer aided design (CAD) packages to aid them in creating these enclosures. Enclosure creation involves a working knowledge of the physics behind electrical and mechanical systems. Each of these engineering disciplines has separate CAD packages with their own set of rules, programming language, and interfaces. This creates a barrier for communication flow between electrical CAD (ECAD) and mechanical CAD (MCAD). The purpose of this thesis …

Product Family Design Using Smart Pareto Filters, Jonathan D. Yearsley

Theses and Dissertations

Product families are frequently used to provide consumers with a variety of appealing products and to help maintain reasonably low production costs for manufacturers. Three common objectives in the design of product families are used to balance the interests of both consumers and manufacturers. These objectives are to maximize (i) product performance, (ii) product distinctiveness as perceived by the consumer, and (iii) product commonality as seen by the manufacturer. In this thesis, three methods are introduced that use multiobjective optimization and Smart Pareto filtering to satisfy the three objectives of product family design. The methods are progressive in nature and …

Design Of A Three-Passage Low Reynolds Number Turbine Cascade With Periodic Flow Conditions, Daniel R. Rogers

Theses and Dissertations

A numerical method for modeling a low Reynolds number turbine blade, the L1M, is presented along with the pitfalls encountered. A laminar solution was confirmed to not accurately predict the flow features known in low Reynolds number turbine blade flow. Three fully turbulent models were then used to try to predict the separation and reattachment of the flow. These models were also found to be insufficient for transitioning flows. A domain was created to manually trip the laminar flow to turbulent flow using a predictive turbulence transition model. The trip in the domain introduced an instability in the flow field …

Drilling, Alternative Fuels And Efficiency: Can The United States Wean Itself From Imported Oil?, Florida Solar Energy Center, Philip Fairey

FSEC Energy Research Center®

Perhaps the most daunting challenge the next generation of Americans will face is what President Bush called our "addiction to oil." The challenge is to find the means to provide for our transportation needs in the face of declining world oil production. Perhaps the central question is whether we will export the great wealth of America to foreign countries in payment for oil before we tackle the grand challenge of creating a new transportation future that does not rely completely on oil.

This article presents the historical facts relative to America's oil demand and domestic and world oil production resources. …

Dynamic Responses Of Marine Risers/Pipes Transporting Fluid Subject To Top End Excitations, J. Leklong, S. Chucheepsakul, S. Kaewunruen

Faculty of Engineering - Papers (Archive)

This paper deals with the dynamic responses to top end excitation of marine risers/pipes conveying internal fluid. The marine riser is often used as a flexible link between undersea bore head and subsurface offshore platform. The tidal waves and the changes of sea level consistently excite its top end connected to a floating vessel. In order to carry out the performance-based design of the marine risers, the evaluation of their dynamic responses to top end excitations is imperative. In this study, the marine riser is simulated using twodimensional beam elements. Energy functional of the marine risers conveying fluids is derived …

A Biomechanical Comparison Of Locking Plates Contrasted With Intramedullary Treatment Of Distal Femur Fracture, Christina Salas

Mechanical Engineering ETDs

This study compares the pattern of failure of locking compression plates (LCP) and intramedullary nails (IM) used in treatment of unstable comminuted distal femur fractures in osteoporotic and normal bones. Possible late failure of the fixation represents a critical problem in the treatment of distal femur fractures. Few biomechanical studies have examined the effects of osteoporosis on stability of the bone after fixation. Some reports have described catastrophic failure of fixation when LCP were used compared with IM nails making salvage procedures difficult. This thesis reports on the behavior of synthetic composite bone and embalmed cadaveric bone with and without …

Micromechanics Model Based On The Nanostructure Of Pfsa Membranes, Ahmet Kusoglu, Michael H. Santare, Anette M. Karlsson, William B. Johnson, Simon Cleghorn

Mechanical Engineering Faculty Publications

A micromechanics model is developed to predict Young’s modulus of perfluorosulfonic acid (PFSA) membranes at various temperatures and water contents. The morphology of PFSA membranes is characterized by a two-phase structure, where hydrophilic clusters expand to hold water molecules during swelling, whereas the hydrophobic polymer network maintains the structural stability. A representative volume element (RVE) is proposed based on the descriptions for the nanostructure of PFSA membranes available in the literature. On the basis of mechanics model, we estimate Young’s modulus in tension of PFSA membranes as a function of water volume fraction for various temperatures. The results show that …

Lean Six Sigma As A Source Of Competitive Advantage, Alessandro Giorgio Cavallini

Theses and Dissertations

Anecdotal data affirms that companies applying Lean Six Sigma in their operations not only deliver higher quality products and services, but also obtain superior financial results. The goal of this research was to empirically verify anecdotal data. The study proposed to analyze a group of publicly traded manufacturing companies with the intent of verifying if a correlation exists between companies being lean and the attainment of superior returns on investments. The researcher performed a series of statistical tests comparing key Financial Performance Indicators (FPI) extracted from annual reports (10-K) from a large pool of companies. The outcome of this study …

Modified Predator-Prey (Mpp) Algorithm For Single-And Multi-Objective Optimization Problems, Souma Chowdhury

FIU Electronic Theses and Dissertations

The aim of this work is to develop an algorithm that can solve multidisciplinary design optimization problems. In predator-prey algorithm, a relatively small number of predators and a much larger number of prey are randomly placed on a two dimensional lattice with connected ends. The predators are partially or completely biased towards one or more objectives, based on which each predator kills the weakest prey in its neighborhood. A stronger prey created through evolution replaces this prey. In case of constrained problems, the sum o f constraint violations serves as an additional objective.

Modifications of the basic predator-prey algorithm have …

تعيين عرض تختال در ورودي كوره هاي پيش گرم ناحيه نورد گرم مجتمع فولاد مباركه با استفاده از پردازش ديجيتال تصاوير, Eaman Alibeigi, Rasoul Amirfattahi, Masoud Harooni, Hamid Montazerolghaem

Masoud Harooni

هر يك از تختال هاي توليد شده در بخش ريخته گري مداوم ناحيه فولاد سازي، پس از مارك زني و تعيين مشتري به يكي از دو صورت هوايي يا سيالي خنك شده و در زمان مقرر به وسيله غلطك هايي وارد كوره پيش گرم مي شوند. در اين مرحله، 1/6 mm تختال تا حرارت 1100 درجه سانتيگراد گرم شده و عمليات نورد گرم بر روي آن به منظور تهيه ورق فولاد با ضخامت صورت مي گيرد. تعيين دقيق مشخصات ابعادي تختال ها از جمله طول، عرض و ضخامت آنها قبل از ورود به كوره هاي پيش گرم و تطبيق دادن …

Drop Impact Dynamic Response Study Of Jedec Jesd22-B111 Test Board, Michael Krist, Jianbiao Pan, Andrew Farris, Nicolas Vickers

Industrial and Manufacturing Engineering

Mobile and handheld electronic devices are prone to being dropped. This drop event may result in failure of solder joints inside these devices. The need for RoHS compliant boards coupled with the demand for reliable electronics has resulted in the development of the JEDEC Standard JESD22-B111 to standardize the method of drop testing surface mount electronic components. However, there has been little study on the effects of additional mass on the board and rigidity of the board on drop test reliability. This paper examines the drop impact dynamic responses of the JEDEC JESD22-B111 board. Of interest are the effects of …

Board Level Failure Analysis Of Chip Scale Package Drop Test Assemblies, Nicholas Vickers, Kyle Rauen, Andrew Farris, Jianbiao Pan

Industrial and Manufacturing Engineering

This paper presents the failure analysis results of board level drop tests. In this study, the test vehicle was designed according to the requirements of the Joint Electron Device Engineering Council (JEDEC) drop test board. The test vehicle was assembled with 15 chip scale packages (CSPs) each having 228 daisy-chained 0.5 mm pitch solder joints using Sn-3.0 wt% Ag-0.5 wt% Cu (SAC305) lead free solder. Assemblies were drop tested using three different peak accelerations of 900 G, 1500 G, 2900 G, with 0.7 ms, 0.5 ms, and 0.3 ms pulse durations, respectively. Scanning electron microscopy (SEM) with energy dispersive spectroscopy …

The Effect Of Ultrasonic Frequency On Gold Wire Bondability And Reliability, Jianbiao Pan, Minh-Nhat Le, Cuong Van Pham

Industrial and Manufacturing Engineering

This paper presents a systematic study on the effect of 120KHz ultrasonic frequency on the bondability and reliability of fine pitch gold wire bonding. The study was carried out on a thermosonic ball bonder that is allowed to easily switch between ultrasonic frequency of 60KHz and 120 KHz by changing the ultrasonic transducer and the ultrasonic generator. Bonding parameters were optimized through design of experiment methodology for four different cases: 25.4 μm wire at 60 kHz, 25.4 μm wire at 120 kHz, 17.8 μm wire at 60 kHz, and 17.8 μm wire at 120 kHz. The integrity of wire bonds …

The Decompositioning Of Volatile-Matter Of Tanjung Enim Coal By Using Thermogravimetry Analyzer (Tga), Nukman Nukman

Makara Journal of Technology

The Decompositioning of Volatile-Matter of Tanjung Enim Coal by using Thermogravimetry Analyzer (TGA). Coal is a nature material which a kind of energy source. The decompotition of coal could analyze by heat treated using thermogravimetry analyzer. The decomposition of the volatile matter for three kinds of Tanjung Enim coal could be known. The value of activation energy that be found diference, then for Semi Anthracite, Bitumonius and Sub Bituminous Coal, the initial temperatures are 60.8 oC, 70.7 oC, 97.8oC, and the last temperatures are 893.8 oC, 832 oC, 584.6oC.

Hydrogen Absorption In Weldments Of Overlaid Claded Pressure Vessel, Ronnie Higuchi Rusli

Makara Journal of Technology

Cracks was found in type 347 stainless steel internal attachment welds of a reactor for a high temperature, and high pressure hydrogen service. One of the possible causes of cracking is low cycle fatigue cracking induced by repetition of thermal stress to embrittled weld metal. Type 347 weld metal loses its ductility by presence of sigma phase and hydrogen.

Isolation Of Methyl Laurate From Coconut Oil As Raw Material For Fatty Alcohol Sulfate, Rita Arbianti, Tania Surya Utami, Astri Nugroho

Makara Journal of Technology

Isolation of Methyl Laurate from Coconut Oil as Raw Material for Fatty Alcohol Sulfate. Methyl laurate is a raw or base material for many industries, including surfactant industries. In this research, coconut oil (VCO) is transesterified with methanol to produce methyl ester, using NaOH as the catalyst. Methyl laurate is then separated by method based on the difference in melting point. This research focuses at determining the effects of some variables in transesterification on the concentration of produced methyl laurate. The variables are temperature (40 oC, 50 oC, 60 oC, 80 oC), time of transesterification reaction (0,5 hour, 1 hour, …

Phase Unwrapping Insar Image Using Local Energy Minimization Approach, Kusworo Adi, Tati L.R. Mengko, Andriyan B. Suksmono, Hendra Gunawan

Makara Journal of Technology

Phase Unwrapping InSAR Image Using Local Energy Minimization Approach. Reconstruction process of phase data from its cover is called Phase Unwrapping (PU). Ideally, without any noise phrase, singularity, and aliasing problems, the phase information can be unwrapped easily. However, in fact, the phase data actually always get noise disturbance and discontinuity. The PU process becomes more complicated and needs a better PU algorithm to address the problems properly. In this research, the local PU algorithm is developed using minimization of close related firstorder pixels energy approach. In this method, the energy difference between four close related pixels is counted, followed …

Two Element Microstrip Antenna Array With Defected Ground Structure, Fitri Yuli Zulkifli, Eko Tjipto Rahardjo, Muhamad Asvial, Djoko Hartanto

Makara Journal of Technology

Two Element Microstrip Antenna Array with Defected Ground Structure. This paper presents a two element microstrip antenna array using trapezium shape defected ground structure (DGS). The DGS is inserted in the ground plane between two elements of antenna array. Insertion of the DGS is intended to suppress the mutual coupling effect produced by antenna array. Simulation and measurement results were taken and compared between antenna array with and without DGS. Measurement results show that the antenna with DGS compared to antenna without DGS can suppress mutual coupling effect to 7.9 dB, improve the return loss to 33.29% from -30.188 dB …