Engineering Commons^™

Development Of Antioxidant Film Based On Gelatin And Carboxymethylcellulose Incorporated With Tecoma Stans (L.) Juss. Ex Kunth Petals Extract For Biodegradable Food Packaging, Pacharawan Ratanasongtham, Passara Sukplee, Yutthana Wongnongwa

Journal of Metals, Materials and Minerals

The aim of this research was to develop a novel combination of antioxidant blended film for use as biodegradable packaging in the food industry.  The antioxidant film was prepared based on gelatin (G) and carboxymethyl cellulose (CMC) incorporated with Tecoma stans (L.) Juss. ex Kunth petals extract (TKE) at various concentrations (0.5, 1.0, and 2.0 mg∙L‒1) via solution casting method. The structural and surface morphology of G/CMC-TKE film were characterized using FTIR spectrometry technique and scanning electron microscopy (SEM), including determining antioxidant activity, water solubility, water vapor permeability, and biodegradability. According to FTIR analysis, the significant interaction between the gelatin …

The Role Of Enhancing Interaction With The Natural Environment In Achieving Social Interaction For Children In Orphanage Institutions, Shamael M. W. Al Dabbagh, Zainab Khalid Rashad Al Khafaji

Al-Esraa University College Journal for Engineering Sciences

The child deprived of family care is considered the child most in need of attention and care. When the orphan child enters a new environment for him, it is obvious that he feels alienated, isolated, and loses the sense of interaction and communication with society. The research sees the possibility of mitigating this feeling by enhancing interaction with the natural environment within the internal spaces of the orphanage building and at the neighborhood level. In order to solve the research problem, the research adopted a hypothesis stating that "interaction with the natural environment enhances the achievement of social interaction for …

Evolution Of Glassy Carbon Derived From Pyrolysis Of Furan Resin, Josh Kemppainen, Ivan Gallegos, Aaron Krieg, Jacob R. Gissinger, Kristopher E. Wise, Margaret Kowalik, Julia A. King, S. Gowtham, Adri Van Duin, Gregory Odegard

Michigan Tech Publications

Glassy carbon (GC) material derived from pyrolyzed furan resin was modeled by using reactive molecular dynamics (MD) simulations. The MD polymerization simulation protocols to cure the furan resin precursor material are validated via comparison of the predicted density and Young's modulus with experimental values. The MD pyrolysis simulations protocols to pyrolyze the furan resin precursor is validated by comparison of calculated density, Young's modulus, carbon content, sp carbon content, the in-plane crystallite size, out-of-plane crystallite stacking height, and interplanar crystallite spacing with experimental results from the literature for furan resin derived GC. The modeling methodology established in this work can …

Alca: Comparing Icelandic Aluminum Emissions To The World Through Statistical Reasoning And Programming-Based Predictive Tools, Markus Sujansky

Iceland: Climate Change and The Arctic

Aluminum production is a process that is heavily reliant on large amounts of available

energy, and therefore lends itself to locations where energy production is abundant. Iceland, as a global leader in Geothermal and Hydropower energy, has experienced an industrial boom in the past 20-30 years, quickly becoming a top 10 worldwide aluminum producer. However, although the three main companies that operate their smelting processes in the country are powered by clean energy, they still import raw materials from all over the world, with source locations ranging from Brazil to Australia. In order to find out if the long distance …

Neurocomputing And Interfacing Digital Tasting System: Research, Design, And Evaluation, Amira J. Zaylaa, Ahmad El Hajj

BAU Journal - Science and Technology

The continuous evolution in computing and interfacing has been extended to develop multi-sensory experiences in many domains such as neurological, auditory, vision, and haptic domains. So far, only a few remarkable system approaches have been approved to be serving the taste sensation digitally. Although taste sensation is linked to the brain, there is a lack of optimal neurocomputing digital taste sensation systems. Our study provides a new neurocomputing method to digitally stimulate the sense of taste by electrical stimulation on the human tongue. We aim to link chemical stimulation and electrical stimulation in order to design an electronic interface for …

Evaluating The Potential Of Geopolymer Concrete As A Sustainable Alternative For Thin White-Topping Pavement, Sathvik S. Chandra, Pshtiwan Shakor, Sarwar Mohmmad, Bankole O. Awuzie, Atul K. Singh, Abishek Rauniyar, M Karakouzian

Civil and Environmental Engineering and Construction Faculty Research

Introduction:

The construction industry uses a large quantity of natural materials in the production of concrete. Although attempts to incorporate green materials in concrete began years ago, not every building uses such materials today, and roadways, particularly, still rely on unsustainable materials.

Methods:

Therefore, this study used alternative materials, including fly ash, manufactured sand aggregates, and different molarities of alkaline activators, to incorporate waste byproducts in a geopolymer concrete white-topping pavement layer. Recent developments have led to the emergence of geopolymers as distinct classes of materials. In the 1990s, fly ash-based geopolymers became more popular than other kinds, as they …

High-Yield Bioinspired Atmospheric Water Capture Through Hydrogels, Yiwei Gao

UNLV Theses, Dissertations, Professional Papers, and Capstones

Water scarcity is a global issue affecting billions of people, and atmospheric water harvesting (AWH) technology has been identified as a potential solution. However, existing single-material AWH approaches have limited water harvesting yields due to alternated water capture, storage, and release stages, and only function within a high relative humidity range. In my doctoral research project, we developed a bio-inspired, hydrogel-based multi-layer AWH approach that allows for segregated capture, storage, and release stages, and is envisioned to have higher daily water harvesting efficiency even in low-humidity areas. My research began with understanding the relations between hydrogel mechanical stiffness, hydraulic permeability, …

Treatment Of Arsenic-Bearing Minerals And Fixation Of Recovered Arsenic Products: An Updated Review, Larry G. Twidwell

Metallurgy

Mineral processing and extractive metallurgical operations have created and are creating appreciable arsenic bearing wastewater and waste solid products that have to be handled, treated for recycle, or treated for environmentally safe disposal. At present there are intense research and operational activities being conducted to provide the best viable processing procedures to ensure that the mineral processing and extractive metallurgical industries are profitable and environmentally secure. The focus of this presentation is on the element arsenic, even though many other deleterious elements may also be present in ores and concentrates. Numerous base metal resources contain arsenic bearing minerals, especially resources …

Adsorption Of Water Vapour On The Microstructure And Stability Of Cu-Zn Bimetallic Coordination Polymer, Bukunola K. Oguntade, Gareth M. Watkins

Tanzania Journal of Science

A current challenge in the design of synthesis lies in the incorporation of two or more transition metals into a coordination polymer. The most widely used approach has been to incorporate a second metal as a generally innocent (coordinatively saturated) part of a linear linker as in the case of multifunctional carboxylated porphyrins (MCPs). The empirical method has been used to obtain many other types of MCPs; however, the selective, direct replacement of one transition metal within a monometallic coordination polymer via controlled stoichiometry has not generally led to maintained structural fidelity. In this present work, three pyromellitic acid complexes …

Physico-Chemical Characterization Of Snail Shells Powder Prepared By Mechanochemical Processes And Thermal Treatment, Mostapha Karaoui, Rachid Hsissou, Mohammed Alami, Mohammed Assouag

Journal of Metals, Materials and Minerals

Natural particles are the most abundant resources exist in nature. Bio-sources of CaCO3 particles have attracted the attention of researchers for multiple cosmetics, industrial, and medical applications. This work investigates the structural evolution of CaCO3 containing in snail shell particles prepared by a mechanochemical process using methods of characterization as well as Differential scanning calorimeter (DSC), Thermogravimetric analysis (TGA), X-ray diffraction (X-RD), Fourier transformation infra-red (FT-IR), and Scanning microscopy equipped with Energy-dispersive X-Ray spectroscopy (SEM-EDXS). The result obtained from the above analysis indicates that SSP calcined between 200℃ to 400℃ undergoes an elimination of water molecules, followed by a phase …

Building Structures From Mycelium, Noah M. Brown

Physics

The purpose of this project was to develop a method for creating bricks from mycelium and agricultural waste. The bulk of the research happened in two parts, the first part being a period in which different substrates, strains, and methods were used build the bricks. This research took place in San Luis Obispo and was aided by a group of students in PSC392 under Dr. Pete Schwartz in early 2022. After developing a method for constructing these bricks, the research was moved to St. Thomas, Jamaica, in collaboration with an ecovillage called The Source Farm from July to September. The …

Effectiveness Of Clay Nanotube Blended Coating Materials For Thermal Insulation, Hawa Hashm

Doctoral Dissertations

Studies conducted by the U.S. Department of Energy reported that heating and cooling systems use nearly 60% of the total energy consumed in a building, while approximately 31% of that energy loss occurs through the improperly insulated floor, walls, and ceiling. Hot summers or severely cold weather can make these problems worse. The passing of conditioned air through these building materials is a substantial source of energy loss, which has driven significant investigation into new environmentally friendly, sustainable, and cost-effective solutions. The main objective of the research was to experimentally evaluate the thermal conductivity of paints blended with halloysite nanotubes …

Effects Of Multilayer Structure On The Microstructure And Optical Properties Of The Dc Sputtered Chromium Thin Films For Selective Solar Absorber Applications, Justine J. Tibaijuka, Margaret E. Samiji, Mmantsae Diale, Nuru R. Mlyuka

Tanzania Journal of Science

Chromium thin films exhibit several properties that make them potential for solar thermal applications. In this work the effect of film thickness and sputtering power based multilayer structure on the optical properties of DC sputtered chromium thin films is reported. The structural, topological, and optical properties of these films were determined by X-ray diffractometer, Atomic Force Microscopy, and Ultraviolet-Visible-Near Infrared spectrophotometer, respectively. XRD spectra revealed a single peak with preferential orientation of (200) and (210) for single layer and multilayer chromium films, respectively. The grain size and roughness were relatively higher for the multilayer compared to single layer Chromium films. …

Architecture Between Development And Ability Programs, Allaa Ahmed Rasheed, Ibrahim Jawad Kadhim

Al-Esraa University College Journal for Engineering Sciences

The development of architecture and its pursuit of perfection can only be achieved through society to reach a specific result when meeting new desires that arise as a result of human development, expanding individual and societal needs, and deepening their relationships in multifaceted ways. The research focuses on development as it requires a clear cumulative vision of the integrative relationship between practice and participation in interpreting the act (effect) from the force (influence). It emphasizes that the power of capabilities is understood through learning and education in describing the capabilities of architecture. This involves adopting new ideas and intellectual premises …

Recent Advances In Microwave Synthesis For Photoluminescence And Photocatalysis, Rajagopalan Krishnan, Sini Nanadath Shibu, Dirk Poelman, Ankush Kumar Badyal, Arup K. Kunti, Hendrik C. Swart, Samvit G. Menon

Cappa Publications

This review provides a comprehensive discussion on the microwave-assisted synthesis of various materials for photoluminescence and photocatalytic applications. In the past decade, because of its ability to synthesize nanomaterials through faster, cleaner and more cost-effective routes compared to conventional heating, microwave techniques have gained significant importance for the synthesis of metal oxides, fluorides, sulphides, and quantum dots. Additionally, due to the uniqueness of its heating mechanism, the synthesis of materials in various nanostructured forms through microwave-assisted methods has been of great interest and is widely pursued. The materials thus synthesized have been applied as sensing elements in gas sensors, luminescent …

Development And Properties Of Sulfate-Resistant And Corrosion-Inhibiting Admixtures, Tongwei Lu, Jie Zhang, Guisheng Cai, Linmao Wang, Xiangyang Guo

International Conference on Durability of Concrete Structures

Sulfate and chloride-induced corrosion of concrete and steel reinforcement are the most important causes of premature failure of durability of concrete structures. To prevent damage in concrete structures, the application of sulfate-resistant and corrosion-inhibiting admixtures has proven to be an effective method. In this study, a new type of corrosion-inhibiting admixtures including organic and special inorganic components are developed and the properties of mortar mixed with them was investigated. The results show that NC-CZ series of sulfate-resistant and corrosion-inhibiting admixtures have been successfully developed. The mortar with NC-CZ has good resistance to sulfate attack, whose corrosion resistance coefficient of mortar …

Study Thermodynamics Of The Magnetite Sulfidation In Copper Smelting Processes, A S. Khasanov, Q T. Ochildiyev, B T. Berdiyarov, Sh T. Khojiev, S T. Matkarimov

Technical science and innovation

The article discusses the problem of reducing the amount of magnetite in the impregnation of copper in the slag generated after the conversion process in copper production in the furnace to reduce slag. Accordingly, a method of lowering magnetite by sulfidation has been proposed, using elemental sulfur as a local and relatively inexpensive sulfiding-reducing agent. The mechanism of chemical phenomena occurring in the interaction regions of magnetite and elemental sulfur has been developed. Based on the mechanism of chemical reactions produced, each chemical reaction that occurs in the process is analysed from a thermodynamic point of view. According to the …

Soil Degradation Of A Plastic Blend Of Opuntia Ficusindica Juice, Animal Protein And Beeswax, Isabel A. Gamez, Daniel R. Kava

Materials Engineering

Since the introduction of single use plastics in the early 1900s, their usage has increased exponentially. Unfortunately, due to this exponential increase there are negative environmental implications of their production, which requires further consideration. Currently, there are various waste disposal practices for SUPs, including landfilling, incineration, and recycling. Recent data revealed that only 14 % of plastic waste was recycled, with 40% of plastic waste being landfilled, while the rest of the plastic waste was incinerated or released to the environment at 14 % and 32 %, respectively. A potential solution to the plastic waste issue is developing a polymer …

Optimization Of Polyhydroxyalkanoates (Phas) Bioplastic Production From Wastewater Activated Sludge, Bo Deng

Dissertations

Polyhydroxyalkanoate (PHA) is a biopolymer which has similar properties as fossil-fuel based plastic but also has capacity to biodegrade completely in the environment condition. This project aims to optimize the process to produce bioplastic PHA using activated sludge from wastewater. Specifically, five major research objectives are explored: (i) develop a quantification method of PHA by using Fourier-transform infrared spectroscopy (FTIR)F; (ii) improve the PHA production from mixed microbial cultures (MMC) by optimizing MMC; (iii) simulate the PHA production by using wastewater; (iv) evaluate the application of enzyme (alpha-amylase) in PHA production process; (v) market the investigation of wastewater produced PHA. …

Global Opportunities And Challenges For Coal Combustion Products With A Circular Economy, Craig Heidrich, Joachim Feuerborn

World of Coal Ash Proceedings

No abstract provided.

Towards Improving The Properties And Furthering Acceptance Of Advanced Technology Nuclear Fuels, Jennifer K. Watkins

Boise State University Theses and Dissertations

To avoid detrimental environmental impacts from climate change, the world community needs to push for the use of clean energy technologies. Development of proposed advanced technology nuclear fuels supports efforts to ensure nuclear energy is included as a non-carbon emitting source of electricity generation. Advanced technology nuclear fuels, also referred to as accident tolerant fuels (ATFs), have received renewed interest for use in the current nuclear reactor fleet as well as in advanced reactor technologies due to their high uranium loading, desirable thermophysical properties, and performance under irradiation as compared to the benchmark oxide fuel. A limiting consideration for the …

Preparation Of Concrete Specimen For Internal Sulfate Attack Analysis Using Electron Backscatter Diffraction, R. Sharon Uwanyuze, Lucas Enright, Jiyao Zhang, Stefan Schafföner

Materials Science and Engineering Faculty Research & Creative Works

Concrete cores were obtained from houses in eastern Connecticut, USA, that had varying degrees of crumbling foundations and wall cracking. Electron backscatter diffraction (EBSD) was used simultaneously with energy dispersive X-ray spectroscopy to investigate the degradation of these samples. This combination allowed the precise correlation of elemental composition with mineral crystallography phase mapping. EBSD examination showed the presence of pyrrhotite, pyrite, and marcasite phases in some of the samples, whereas internal sulfate attack (ISA) is triggered by the release of sulfates through the oxidation of such iron sulfides. Secondary expansion products from ISA are associated with foundation cracking, wall bulging, …

Development Of Cost-Effective High-Modulus Asphalt Concrete (Hmac) Mixtures Using Crumb Rubber And Local Construction Materials In Louisiana., Ibrahim A.I.E Elnaml

LSU Master's Theses

One of the emerging solutions to enhance the durability of asphalt pavements is the use of a French asphalt mix known as “High-Modulus Asphalt Concrete (HMAC).” This mix uses a hard asphalt binder, high binder content (about 6%), and low air voids content as compared to Superpave mixtures. The key objective of this study was to develop a cost-effective HMAC mixture using crumb rubber and local materials in Louisiana. To achieve this objective, four HMAC mixtures were prepared using two asphalt binders (PG 82-22 and PG 76-22 plus 10% crumb rubber) and two Reclaimed Asphalt Pavement (RAP) contents (20% and …

Laptop Recycling Case Study: Estimating The Contained Value And Value Recovery Process Feasibility Of End-Of-Life Consumer Electronics, Zebulon Hart

Theses and Dissertations--Mining Engineering

Work has been done to establish, through the development and use of novel assay techniques and analysis metrics, the contained value of a sampling of laptop computers (as an analog for myriad e-waste sources). This work has conceptualized e-waste as an alternative to geologic-origin complex metallic ores and has likewise evaluated the feasibility of value recovery from e-waste sources in a similar manner to an ore. The application of conventional and novel mineral separation techniques to e-waste recycling processes has been evaluated and positive results are demonstrated. Further, this work has demonstrated the ability to identify the presence of base …

Experimental Optimization Of Simulated Ring Rolling Operation For Heavy Rail Industry, Jacob M. Summers

Masters Theses

“Industrially cast AISI 1070 steel wheel pre-forms from Amsted Rail Co. were experimentally hot rolled to simulate the conditions for industrial wheel rolling. Ring rolling of near net shape castings can improve location specific properties by decreasing segregation, closing porosity, and reducing grain size without the use of multiple forging operations in a traditional forging line. As-cast wheel sections were subjected to thermomechanical processing routes using a 2-high rolling mill in a temperature range of 830°C to 1200°C. The goal being to simulate the ring rolling process and optimize benefits of mechanical properties of the as-rolled steel. Charpy V- and …

Critical Analysis Of Material Consumption And Cost Reduction Techniques For The Apparel Cutting Processes, Ismael Taifa, Ibrahim Twaha, Mboka A Mwakibambo

Tanzania Journal of Science

Revenues generation in the garment industry is synonymous with material consumption. This study thus analysed material consumption and cost reduction techniques in the Tanzanian garment industry. The research employed quantitative (experimentation) and qualitative approaches (document review and observation technique) in the apparel cutting processes. Experimental results of material consumption from ten tests averaged efficiency of 78.67%, the wasted pieces (19.2%), and unnoticed waste (2.03%). Essential considerations to reduce material waste include: digitalising the fabric cutting processes; providing workers training; deploying appropriate practices in the cutting room (e.g. pattern engineering and pattern accuracy); considering the quality of the procured fabric and …

Direct Activation Of Light Alkanes To Value-Added Chemicals Using Supported Metal Oxide Catalysts, Md Ashraful Abedin

LSU Doctoral Dissertations

One of the most challenging aspects of modern-day catalysis is the conversion of methane. Direct conversion of methane via dehydroaromatization (MDHA) is a well-known process which can produce valuable hydrocarbons. Mo oxide supported on ZSM-5/MCM-22 has been studied extensively in recent years for MDHA. Mo carbides are responsible for activating methane by forming CHx species. These are dimerized into C2Hy and oligomerized on ZSM-5/MCM-22 Brønsted acid sites to form aromatics. Sulfated zirconia (SZ) supported Mo catalyst contains the acid sites necessary to produce benzene in MDHA. Here, sulfated hafnia (SH), a homologous oxide like SZ, has been proposed to provide …

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

Assessment Of Carbon Dioxide Emission And Its Impact On High-Rise Mixed-Use Buildings In Egypt, Ahmed Salah Hamza

Theses and Dissertations

With Egypt's vision of 2030 focusing on sustainable development with a true emphasis on Carbon Dioxide (CO₂) emission reduction in the newly built cities and high-rise buildings, efforts are exerted on various levels towards accomplishing the vision’s goals. This is achieved through multiple tools and models associated with aiding the reduction of carbon emissions, yet not a clear one was introduced for the mixed-use buildings in Egypt.

Through this work, a significant gap was identified with respect to high-rise buildings carbon emission assessment in Egypt. This was a main driving force for this work in an attempt to …

Use Of Biomimicry Design Approach In Constructing Sustainable Resilient Structures (Case Study: Port Of Beirut), Farouk Bader, Marwan Halabi, Hiba Mohsen, Maged Youssef

BAU Journal - Creative Sustainable Development

Resiliency is not the same as sustainability, nor its substitute, but definitely the two concepts complement each other’s. Sustainability is the avoidance of depletion of natural resources to maintain ecological balance whereas resiliency is to recover, adapt and keep going in the face of setbacks. While designing with green approach is important but what will happen to leed points if the building becomes uninhabitable due to disasters, that’s where resiliency comes into play. The 2019 statistics showed that natural disasters accounted for 133 billion dollars losses and manmade ones accounted for other 7 billion in addition to 11,755 people worldwide …