Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- Microstructure (5)
- Mechanical properties (4)
- Nanophotonics (4)
- Thin films (4)
- Annealing (3)
-
- Deformation (3)
- Nanocomposites (3)
- Titanium alloys (3)
- [RSTDPub] (3)
- Amorphous (2)
- Co-sputtering (2)
- Composite materials (2)
- Corrosion (2)
- Faraday effect (2)
- Garnets (2)
- Hysteresis loop (2)
- Integrated optics (2)
- MO garnets (2)
- Magneto-photonic crystals (2)
- Magneto-plasmonic crystals (2)
- Mechanical property (2)
- Metallurgy (2)
- Metals (2)
- Multilayer heterostructures (2)
- Nanocrystals (2)
- Selective laser melting (2)
- Silver (2)
- Surface plasmon polaritons (2)
- Titanium alloy (2)
- 3D printers (1)
- Publication Year
- Publication
- Publication Type
Articles 1 - 30 of 36
Full-Text Articles in Engineering
Hydrogen-Wettability Alteration Of Indiana Limestone In The Presence Of Organic Acids And Nanofluid, Mirhasan Hosseini, Rossen Sedev, Mujahid Ali, Muhammad Ali, Jalal Fahimpour, Alireza Keshavarz, Sefan Iglauer
Hydrogen-Wettability Alteration Of Indiana Limestone In The Presence Of Organic Acids And Nanofluid, Mirhasan Hosseini, Rossen Sedev, Mujahid Ali, Muhammad Ali, Jalal Fahimpour, Alireza Keshavarz, Sefan Iglauer
Research outputs 2022 to 2026
This study focuses on the wettability alteration (changing from a hydrophobic state to a hydrophilic state) of Indiana limestone for hydrogen (H2) geological storage. We examine the effect of hexanoic acid C6, lauric acid C12, and stearic acid C18, on the wettability of Indiana limestone at ambient (298 K and 0.1 MPa) and reservoir (323 K and 8.27 MPa) conditions. The effects of silica nanofluids (silica with deionized water) at various concentrations (0.1 wt%, 0.25 wt%, and 0.5 wt%) on the wettability reversal of stearic-aged samples were tested at ambient and reservoir …
Microstructure Evolution And Mechanical Property Response Of Tc11 Titanium Alloy Under Electroshock Treatment, Chang Liu, Lechun Xie, Dongsheng Qian, Lin Hua, Liqiang Wang, Lai-Chang Zhang
Microstructure Evolution And Mechanical Property Response Of Tc11 Titanium Alloy Under Electroshock Treatment, Chang Liu, Lechun Xie, Dongsheng Qian, Lin Hua, Liqiang Wang, Lai-Chang Zhang
Research outputs 2014 to 2021
© 2020 The Authors This work investigated the effects of electroshock treatment (EST) on the microstructure variation and mechanical properties of TC11 alloy. The average hardness of the specimens decreased from 358 HV to 328 HV after EST of 0.04 s, then increased to 396 HV after EST of 0.06 s. After EST, the yield strength of specimen declined from 959 MPa to 797 MPa after EST of 0.04 s, and then increased to 1265 MPa after EST of 0.06 s, but the fracture strain decreased continuously. The variation in mechanical properties was closely related to the phase transition from …
The Effect Of Tin-, Ticn-, Tialn-, And Tisin Coated Tools On The Surface Defects And Geometric Tolerances Of Holes In Multi-Spindle Drilling Of Al2024 Alloy, Muhammad Aamir, Adrian Davis, William Keeble, Ugur Koklu, Khaled Giasin, Ana Vafadar, Majid Tolouei Rad
The Effect Of Tin-, Ticn-, Tialn-, And Tisin Coated Tools On The Surface Defects And Geometric Tolerances Of Holes In Multi-Spindle Drilling Of Al2024 Alloy, Muhammad Aamir, Adrian Davis, William Keeble, Ugur Koklu, Khaled Giasin, Ana Vafadar, Majid Tolouei Rad
Research outputs 2014 to 2021
The integrity of machined holes depends on many parameters, some of which are related to the cutting tool (geometry, coating, material). Other influential parameters are related to the machining process variables (spindle speed, feed rate, workpiece material), all of which can affect the quality of the hole and drilling induced damage on its surface. This study investigates the effect of uncoated tools and four types of tool coatings (TiN-, TiCN-, TiAlN-, and TiSiN) on the hole quality and its microstructure. The study analyzed several hole geometrical metrics, namely hole size, circularity, cylindricity, and perpendicularity of an Al2024 aluminum alloy using …
Microstructure And Mechanical Behavior Of Metastable Beta Type Titanium Alloys, Chirag Dhirajlal Rabadia
Microstructure And Mechanical Behavior Of Metastable Beta Type Titanium Alloys, Chirag Dhirajlal Rabadia
Theses: Doctorates and Masters
Current biomaterials such as stainless steel, Co-Cr alloys, commercially pure titanium and Ti-6Al- 4V either possess poor mechanical compatibility and/or produce toxic effects in the human body after several years of usage. Consequently, there is an enormous demand for long-lasting biomaterials which provide a better combination of mechanical, corrosion and biological properties. In addition to this, alloys used in high-strength applications possess either high-strength or large plasticity. However, a high-strength alloy should possess a better blend of both strength and plasticity when used in high-strength applications. Metastable β-titanium alloys are the best suited alloys for biomedical and high-strength applications because …
Design, Microstructure And Properties Of Metastable Beta-Type Biomedical Titanium Alloys, Syed Faraz Jawed
Design, Microstructure And Properties Of Metastable Beta-Type Biomedical Titanium Alloys, Syed Faraz Jawed
Theses: Doctorates and Masters
Many existing implant biomaterials including cobalt-chromium alloy, stainless steel, Ti-6Al-4V and commercially pure titanium have all been shown to demonstrate mechanical incompatibility, poor osseointegration and/or cause cytotoxic effects on the human body after some years of application, leading to revision surgery in most cases. Consequently, there is an immediate need for an enduring biomaterial that displays good mechanical properties and possesses biocompatibility and corrosion resistance, in order to reduce rates of revision surgeries. In this PhD work, based on the 𝐵𝑜̅̅̅̅-𝑀𝑑̅̅̅̅̅, 𝑒/𝑎̅̅̅̅̅-𝛥𝑟̅̅̅ and BF-d-electron superelastic theoretical relationships four new series of quaternary Ti-25Nb-8Zr-xCr, Ti-25Nb-xSn-yCr, Ti26Nb-xMn-yZr and Ti-25Nb-xMn-ySn alloys have been …
Phase Interaction Induced Texture In A Plasma Sprayed-Remelted Nicrbsi Coating During Solidification: An Electron Backscatter Diffraction Study, Liang-Yu Chen, Tianxiang Xu, Haiyang Wang, Peng Sang, Sheng Lu, Ze-Xin Wang, Shujin Chen, Lai-Chang Zhang
Phase Interaction Induced Texture In A Plasma Sprayed-Remelted Nicrbsi Coating During Solidification: An Electron Backscatter Diffraction Study, Liang-Yu Chen, Tianxiang Xu, Haiyang Wang, Peng Sang, Sheng Lu, Ze-Xin Wang, Shujin Chen, Lai-Chang Zhang
Research outputs 2014 to 2021
Although considerable endeavors have been dedicated to investigate the microstructures of the remelting-enhanced NiCrBSi coatings, the textures in the remelted coatings, which may result in property anisotropy, are rarely studied. In this work, the recrystallized fractions, grain orientations and interphase boundaries for Ni, Ni3B and CrB in a plasma sprayed-remelted NiCrBSi coating were investigated by electron backscatter diffraction. The results demonstrate that the texture is induced by phase interaction during solidification. Cooling from the liquid, the firstly formed Ni grains possess a cube fiber texture of {001}〈001〉. The successively formed Ni3B colonies are randomly oriented and …
Effect Of Direct Current Electric Field Intensity And Electrolyte Layer Thickness On Oxygen Reduction In Simulated Atmospheric Environment, Xin Zhang, Junxi Zhang, Qimeng Chen, Nianwei Dai, Qingzhao Ni, Lai-Chang Zhang, Fahe Cao, Jianqing Zhang
Effect Of Direct Current Electric Field Intensity And Electrolyte Layer Thickness On Oxygen Reduction In Simulated Atmospheric Environment, Xin Zhang, Junxi Zhang, Qimeng Chen, Nianwei Dai, Qingzhao Ni, Lai-Chang Zhang, Fahe Cao, Jianqing Zhang
Research outputs 2014 to 2021
The effect of direct current (DC) electric field and electrolyte layer thickness on oxygen reduction in simulated atmospheric environment were investigated using electrochemical measurements. The results show that the limiting diffusion current density (ilim) decreases with increasing the thin electrolyte layers (TELs) thickness but it increases with increasing the DC electric field intensity. The potential shifts negatively with the DC electric field. It is found that the DC electric field enables OH− ions to quickly migrate from the solution/electrode interface to the electrolyte layer. All these features promote the cathodic reduction process thereby enhancing the metal …
On The Detection Of Carbon Fibre Storage Contamination And Its Effect On The Fibre-Matrix Interface, Quanxiang Li, Andrea L Woodhead, Jeffrey S Church, Minoo Naebe
On The Detection Of Carbon Fibre Storage Contamination And Its Effect On The Fibre-Matrix Interface, Quanxiang Li, Andrea L Woodhead, Jeffrey S Church, Minoo Naebe
Research outputs 2014 to 2021
Contamination caused by inappropriate carbon fibre (CF) storage may have an impact on their end use in reinforced composite materials. Due to the chemical complexity of CFs it is not easy to detect potential contaminants, especially at the early stage during manufacturing and handling. In this paper, X-ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared (FTIR) spectroscopy and Surface Energy Analysis (IGC-SEA) were used to assess the surfaces of CFs stored in polyolefin zip-lock bags for possible contamination. Only after over 2 months in-bag storage, was XPS capable of detecting a minor increase in nitrogen on the CF surface while FTIR …
Magneto-Optic Properties Of Ultrathin Nanocrystalline Ferrite Garnet Films In The 8k To 300k Temperature Interval, Viatcheslav Kotov, Vladimir Shavrov, A. Popkov, Mikhail Vasiliev, Kamal Alameh, Mohammad Alam, L. Alyabyeva, Dmitry Balabanov, Vladimir Burkov, M Virchenko
Magneto-Optic Properties Of Ultrathin Nanocrystalline Ferrite Garnet Films In The 8k To 300k Temperature Interval, Viatcheslav Kotov, Vladimir Shavrov, A. Popkov, Mikhail Vasiliev, Kamal Alameh, Mohammad Alam, L. Alyabyeva, Dmitry Balabanov, Vladimir Burkov, M Virchenko
Research outputs 2014 to 2021
A study of the initial stages of crystallization in RF magnetron-sputtered ferrite garnet films is reported, in which a series of ultrathin Bi2Dy1Fe4Ga1O12 layers is fabricated and characterized. The spectral and temperature dependencies of magnetic circular dichroism (MCD) of these films are studied in the temperature range from 300 K down to 8 K. Measured magneto-optical properties are reported in the spectral range between 300 and 600 nm. In ultrathin garnets at temperatures below 160 K, we found that between 360 and 520 nm, the spectral MCD dependencies were typical of bismuth-substituted garnets with high levels of gallium dilution in …
Fe73.5si13.5b9cu1nb3 Metallic Glass: Rapid Activation Of Peroxymonosulfate Towards Ultrafast Eosin Y Degradation, Jincheng Wang, Zhe Jia, Peng Qin, W. C. Zhang, M. D. Wang, T. B. Sercombe, Laichang Zhang
Fe73.5si13.5b9cu1nb3 Metallic Glass: Rapid Activation Of Peroxymonosulfate Towards Ultrafast Eosin Y Degradation, Jincheng Wang, Zhe Jia, Peng Qin, W. C. Zhang, M. D. Wang, T. B. Sercombe, Laichang Zhang
Research outputs 2014 to 2021
Discovering functional applications of metallic glasses (MGs) as heterogeneous catalysts is a fundamental and essential topic. This work reports the rapid production of sulfate radicals (SO4−) from peroxymonosulfate (PMS) using Fe73.5Si13.5B9Cu1Nb3 glassy ribbons as catalysts for Eosin Y (EY) dye wastewater treatment. The reaction rates (k) from the experimental data reveal that the EY degradation is well fitted with the pseudo-first-order kinetic model. The strong electron transfer ability is characterized by electrochemical methods, presenting an advanced catalytic performance for EY degradation. Various experimental parameters, including dye …
Photonic Crystal-Supported Long-Range Surface Plasmon-Polaritons Propagating Along High-Quality Silver Nanofilms, Sergey K. Sekatskii, Anton Smirnov, Giovanni Dietler, Mohammad Nur E. Alam, Mikhail Vasiliev, Kamal Alameh
Photonic Crystal-Supported Long-Range Surface Plasmon-Polaritons Propagating Along High-Quality Silver Nanofilms, Sergey K. Sekatskii, Anton Smirnov, Giovanni Dietler, Mohammad Nur E. Alam, Mikhail Vasiliev, Kamal Alameh
Research outputs 2014 to 2021
Long-range surface plasmon-polaritons (LRSPP) with a propagation length equal to 180 microns at the wavelength of 633 nm have been observed at the interface of 12.5 nm-thick silver nanofilm, coated by a 20 nm-thick protective ZnS layer, with air. Their propagation has been supported by a specially prepared 40-layer 1D Photonic Crystal designed in such a manner that silver layer has been deposited directly onto thin ZnS layer, earlier shown to be a non-oxide material most suitable for the preparation of high-quality thin silver nanofilms.
Homogenization And Growth Behavior Of Second-Phase Particles In A Deformed Zr-Sn-Nb-Fe-Cu-Si-O Alloy, Liang-Yu Chen, Peng Sang, Lina Zhang, Dongpo Song, Yanqiu Chu, Linjiang Chai, Laichang Zhang
Homogenization And Growth Behavior Of Second-Phase Particles In A Deformed Zr-Sn-Nb-Fe-Cu-Si-O Alloy, Liang-Yu Chen, Peng Sang, Lina Zhang, Dongpo Song, Yanqiu Chu, Linjiang Chai, Laichang Zhang
Research outputs 2014 to 2021
Homogeneous distribution of fine second-phase particles (SPPs) fabricated by cycles of deformation and annealing in zirconium alloys is a critical consideration for the corrosion resistance of fuel claddings. Different deformation degrees of zirconium alloys would result in distinctive microstructures, leading to a distinct growth of SPPs during subsequent annealing. Unfortunately, the homogenization and growth behavior of SPPs in deformed zirconium alloys have not been well studied. In this work, a β-quenched Zr–Sn–Nb–Fe–Cu–Si–O alloy was rolled and annealed at 580◦C or 680◦C. The morphologies, distributions, and sizes of SPPs resulting from the different processing procedures were investigated. A linear distribution of …
Near-Net Forming Complex Shaped Zr-Based Bulk Metallic Glasses By High Pressure Die Casting, Lehua Liu, Tao Zhang, Zhiyuan Liu, Chunyan Yu, Xixi Dong, Liangju He, Kuan Gao, Xuguang Zhu, Wenhao Li, Chengyong Wang, Peijie Li, Laichang Zhang, Lugee Li
Near-Net Forming Complex Shaped Zr-Based Bulk Metallic Glasses By High Pressure Die Casting, Lehua Liu, Tao Zhang, Zhiyuan Liu, Chunyan Yu, Xixi Dong, Liangju He, Kuan Gao, Xuguang Zhu, Wenhao Li, Chengyong Wang, Peijie Li, Laichang Zhang, Lugee Li
Research outputs 2014 to 2021
Forming complex geometries using the casting process is a big challenge for bulk metallic glasses (BMGs), because of a lack of time of the window for shaping under the required high cooling rate. In this work, we open an approach named the “entire process vacuum high pressure die casting” (EPV-HPDC), which delivers the ability to fill die with molten metal in milliseconds, and create solidification under high pressure. Based on this process, various Zr-based BMGs were prepared by using industrial grade raw material. The results indicate that the EPV-HPDC process is feasible to produce a glassy structure for most Zr-based …
Enhanced Corrosion And Wear Resistance Properties Of Carbon Fiber Reinforced Ni-Based Composite Coating By Laser Cladding, Jianbo Lei, Chuan Shi, Shenfeng Zhou, Zhenjie Gu, Laichang Zhang
Enhanced Corrosion And Wear Resistance Properties Of Carbon Fiber Reinforced Ni-Based Composite Coating By Laser Cladding, Jianbo Lei, Chuan Shi, Shenfeng Zhou, Zhenjie Gu, Laichang Zhang
Research outputs 2014 to 2021
To enhance the wear resistance and corrosion resistance of Ni-based coatings, carbon fibers reinforced nickel-based composite coatings (CFs/Ni) were fabricated on the surface of 1Cr13 stainless steel by laser cladding (LC). The microstructure characteristics, microhardness, wear and corrosion performances of the composite coatings were investigated. The results show that CFs can effectively improve the corrosion and wear resistances of Ni-based coatings. With increasing laser scanning speed, the morphology of CFs in composite coatings is more integral and the corrosion and wear resistances of the composite coatings are improved. Especially, when laser scanning speed is increased to 8 mm/s, the average …
Ferric Carbide Nanocrystals Encapsulated In Nitrogen-Doped Carbon Nanotubes As An Outstanding Environmental Catalyst, Chen Wang, Jian Kang, Ping Liang, Huayang Zhang, Hongqi Sun, Moses O. Tadé, Shaobin Wang
Ferric Carbide Nanocrystals Encapsulated In Nitrogen-Doped Carbon Nanotubes As An Outstanding Environmental Catalyst, Chen Wang, Jian Kang, Ping Liang, Huayang Zhang, Hongqi Sun, Moses O. Tadé, Shaobin Wang
Research outputs 2014 to 2021
Nitrogen-doped carbon nanotubes encapsulating iron carbide (Fe3C) nanocrystals (Fe3C@NCNT) were fabricated by a simple and direct pyrolysis method using melamine and ferric chloride as the C, N and Fe precursors. The surface morphology, structure and composition of the Fe3C@NCNT materials were thoroughly investigated. The nanomaterials were employed as novel catalysts for peroxymonosulfate (PMS) activation; outstanding efficiency, high stability and excellent reusability were observed in the catalytic oxidation of organics. The encapsulated Fe3C nanoparticles played a key role in the emerging synergetic effects of the carbide and the protective graphitic layers. In addition, …
Processing, Microstructure And Mechanical Properties Of Beta-Type Titanium Porous Structures Made By Additive Manufacturing, Yujing Liu
Theses: Doctorates and Masters
Tissue engineering through the application of a low modulus, high strength format as a potential approach for increasing the durability of bone implants has been attracting significant attention. Titanium alloys are widely used for biomedical applications because of their low modulus, high biocompatibility, specific strength and corrosion resistance. These reasons affirm why titanium alloy is selected as the specific material to research. The development of low modulus biomaterials is considered to be an effective method to remove the mismatch between biomaterial implants and surrounding bone tissue, thereby reducing the risk of bone resorption. So far, Ti–24Nb–4Zr–8Sn alloy (abbreviated hereafter as …
A Practical Anodic And Cathodic Curve Intersection Model To Understand Multiple Corrosion Potentials Of Fe-Based Glassy Alloys In Oh-Contained Solutions, Yingjie Li, Yonggang Wang, Bang An, Hui Xu, Yihua Liu, Laichang Zhang, Houyi Ma, Weimin Wang
A Practical Anodic And Cathodic Curve Intersection Model To Understand Multiple Corrosion Potentials Of Fe-Based Glassy Alloys In Oh-Contained Solutions, Yingjie Li, Yonggang Wang, Bang An, Hui Xu, Yihua Liu, Laichang Zhang, Houyi Ma, Weimin Wang
Research outputs 2014 to 2021
A practical anodic and cathodic curve intersection model, which consisted of an apparent anodic curve and an imaginary cathodic line, was proposed to explain multiple corrosion potentials occurred in potentiodynamic polarization curves of Fe-based glassy alloys in alkaline solution. The apparent anodic curve was selected from the measured anodic curves. The imaginary cathodic line was obtained by linearly fitting the differences of anodic curves and can be moved evenly or rotated to predict the number and value of corrosion potentials. © 2016 Li et al. This is an open access article distributed under the terms of the Creative Commons Attribution …
Equiaxed Ti-Based Composites With High Strength And Large Plasticity Prepared By Sintering And Crystallizing Amorphous Powder, Lehua Liu, Chao Yang, L. M. Kang, Yan Long, Zhiyu Xiao, Peijie Li, Laichang Zhang
Equiaxed Ti-Based Composites With High Strength And Large Plasticity Prepared By Sintering And Crystallizing Amorphous Powder, Lehua Liu, Chao Yang, L. M. Kang, Yan Long, Zhiyu Xiao, Peijie Li, Laichang Zhang
Research outputs 2014 to 2021
High-performance titanium alloys with an equiaxed composite microstructure were achieved by sintering and crystallizing amorphous powder. By introducing a second phase in a β-Ti matrix, series of optimized Ti-Nb-Fe-Co-Al and Ti-Nb-Cu-Ni-Al composites, which have a microstructure composed of ultrafine-grained and equiaxed CoTi2 or (Cu,Ni)Ti2 precipitated phases surrounded by a ductile β-Ti matrix, were fabricated by sintering and crystallizing mechanically alloyed amorphous powder. The as-fabricated composites exhibit ultra-high ultimate compressive strength of 2585MPa and extremely large compressive plastic strain of around 40%, which are greater than the corresponding ones for most titanium alloys. In contrast, the alloy fabricated by …
Processing Of Al-12si-Tnm Composites By Selective Laser Melting And Evaluation Of Compressive And Wear Properties, Konda Prashanth, Sergio Scudino, Anil Chaubey, Lukas Löber, Pei Wang, Hooyar Attar, Frank Schimansky, Florian Pyczak, Jürgen Eckert
Processing Of Al-12si-Tnm Composites By Selective Laser Melting And Evaluation Of Compressive And Wear Properties, Konda Prashanth, Sergio Scudino, Anil Chaubey, Lukas Löber, Pei Wang, Hooyar Attar, Frank Schimansky, Florian Pyczak, Jürgen Eckert
Research outputs 2014 to 2021
Al-12Si (80 vol%)-Ti52.4Al42.2Nb4.4Mo0.9B0.06 (at.%) (TNM) composites were successfully produced by the selective laser melting (SLM). Detailed structural and microstructural analysis shows the formation of the Al6MoTi intermetallic phase due to the reaction of the TNM reinforcement with the Al-12Si matrix during SLM. Compression tests reveal that the composites exhibit significantly improved properties (∼140 and ∼160 MPa higher yield and ultimate compressive strengths, respectively) compared with the Al-12Si matrix. However, the samples break at ∼6% total strain under compression, thus showing a reduced plasticity of the composites. Sliding wear tests were carried out for both the Al-12Si matrix and the Al-12Si-TNM …
Synthesis, Characteristics, And Material Properties Dataset Of Bi:Dyig-Oxide Garnet-Type Nanocomposites, M Nur-E-Alam, Mikhail Vasiliev, Kamal Alameh
Synthesis, Characteristics, And Material Properties Dataset Of Bi:Dyig-Oxide Garnet-Type Nanocomposites, M Nur-E-Alam, Mikhail Vasiliev, Kamal Alameh
Research outputs 2014 to 2021
The fabrication, annealing crystallization processes, and material properties of (Bi,Dy)3(Fe,Ga)5O12:Bi2O3 nanocomposites are investigated and summarized. The stoichiometry of these nanocomposites is optimized for magnetooptic applications using the approach of stoichiometry adjustment (implemented by means of varying RF power densities applied to the sputtering targets used to prepare the nanocomposite thin films). The crystallization processes for all developed batches of as-deposited films are carried out by annealing runs at different temperatures and process durations. This paper describes the methodologies used to optimize the compositions (by calculating the volumetric fractions of excess bismuth oxide to be mixed with the garnet-stoichiometry species during …
Tunable Optical Nanocavity Of Iron-Garnet With A Buried Metal Layer, Alexey N. Kuz'michev, Lars E. Kreilkamp, Mohammed Nur-E-Alam, Evgeni Bezus, Mikhail Vasilev, Iliya A. Akimov, Kamal Alameh, Manfred Bayer, Vladimir I. Belotelov
Tunable Optical Nanocavity Of Iron-Garnet With A Buried Metal Layer, Alexey N. Kuz'michev, Lars E. Kreilkamp, Mohammed Nur-E-Alam, Evgeni Bezus, Mikhail Vasilev, Iliya A. Akimov, Kamal Alameh, Manfred Bayer, Vladimir I. Belotelov
Research outputs 2014 to 2021
We report on the fabrication and characterization of a novel magnetophotonic structure designed as iron garnet based magneto-optical nanoresonator cavity constrained by two noble metal mirrors. Since the iron garnet layer requires annealing at high temperatures, the fabrication process can be rather challenging. Special approaches for the protection of metal layers against oxidation and morphological changes along with a special plasma-assisted polishing of the iron garnet layer surface were used to achieve a 10-fold enhancement of the Faraday rotation angle (up to 10.8°=μm) within a special resonance peak of 12 nm (FWHM) linewidth at a wavelength of 772 nm, in …
The Ph Sensing Properties Of Rf Sputtered Ruo2 Thin-Film Prepared Using Different Ar/O2 Flow Ratio, Ali Sardarinejad, Devendra Kumar Maurya, Kamal Alameh
The Ph Sensing Properties Of Rf Sputtered Ruo2 Thin-Film Prepared Using Different Ar/O2 Flow Ratio, Ali Sardarinejad, Devendra Kumar Maurya, Kamal Alameh
Research outputs 2014 to 2021
The influence of the Ar/O2 gas ratio during radio frequency (RF) sputtering of the RuO2 sensing electrode on the pH sensing performance is investigated. The developed pH sensor consists in an RF sputtered ruthenium oxide thin-film sensing electrode, in conjunction with an electroplated Ag/AgCl reference electrode. The performance and characterization of the developed pH sensors in terms of sensitivity, response time, stability, reversibility, and hysteresis are investigated. Experimental results show that the pH sensor exhibits super-Nernstian slopes in the range of 64.33-73.83 mV/pH for Ar/O2 gas ratio between 10/0-7/3. In particular, the best pH sensing performance, in …
Growth, Characterisation, And Properties Of Bi1.8lu1.2fe3.6al1.4o12 Garnet Films Prepared Using Two Different Substrate Temperatures, Mohammad Alam, Mikhail Vasiliev, Kamal Alameh
Growth, Characterisation, And Properties Of Bi1.8lu1.2fe3.6al1.4o12 Garnet Films Prepared Using Two Different Substrate Temperatures, Mohammad Alam, Mikhail Vasiliev, Kamal Alameh
Research outputs 2014 to 2021
We prepare highly Bismuth substituted iron garnet of composition type Bi1.8Lu1.2Fe3.6Al1.4O12 by using low and high substrate temperatures (250°C and 680°C) during the deposition process inside the vacuum chamber of RF magnetron sputtering system. The crystallisation process of this garnet type thin film materials are performed by means of optimised high temperature oven annealing process and conduct several characterisation techniques to obtain and evaluate their properties. All the optimally annealed samples possess very promising and attractive properties. Comparatively low coercive force (below 15 Oe) is achieved in garnet films prepared at …
Recent Developments In Magneto-Optic Garnet-Type Thin-Film Materials Synthesis, Mohammad Nur-E-Alam, Mikhail Vasiliev, Viacheslav Kotov, Kamal Alameh
Recent Developments In Magneto-Optic Garnet-Type Thin-Film Materials Synthesis, Mohammad Nur-E-Alam, Mikhail Vasiliev, Viacheslav Kotov, Kamal Alameh
Research outputs 2014 to 2021
Magneto-optic (MO) garnets are used in a range of applications in nanophotonics, integrated optics, communications and imaging. Bi-substituted iron garnets of different compositions are the most useful class of materials in applied magnetooptics due to their excellent MO properties (large Faraday effect) and record-high MO figure of merit among all semitransparent dielectrics. It is highly desirable to synthesise garnets which possess simultaneously a high MO figure of merit and large uniaxial magnetic anisotropy. However, the simultaneous optimization of several material properties and parameters can be difficult in single-layer garnet thin films, and it is also challenging to prepare films with …
Recent Developments In Magneto-Optic Garnet-Type Thin-Film Materials Synthesis, Mohammad Nur E Alam, Mikhail Vasiliev, Viacheslav Kotov, Kamal Alameh
Recent Developments In Magneto-Optic Garnet-Type Thin-Film Materials Synthesis, Mohammad Nur E Alam, Mikhail Vasiliev, Viacheslav Kotov, Kamal Alameh
Research outputs 2013
Magneto-optic (MO) garnets are used in a range of applications in nanophotonics, integrated optics, communications and imaging. Bi-substituted iron garnets of different compositions are the most useful class of materials in applied magneto- optics due to their excellent MO properties (large Faraday effect) and record-high MO figure of merit among all semi- transparent dielectrics. It is highly desirable to synthesise garnets which possess simultaneously a high MO figure of merit and large uniaxial magnetic anisotropy. However, the simultaneous optimization of several material properties and parameters can be difficult in single-layer garnet thin films, and it is also challenging to prepare …
The Effect Of Gamma Radiation On Fibre Bragg Grating Sensors When Used As Radiation Dosimeters, Des Baccini
The Effect Of Gamma Radiation On Fibre Bragg Grating Sensors When Used As Radiation Dosimeters, Des Baccini
Theses : Honours
The effects of Gamma Radiation on Fibre Bragg Gratings (FBGs), when used as a radiation dosimeter, was proposed. The focus of this study centred on the FBG performance, and in particular the Bragg Wavelength Shift (BWS) whilst being exposed to ionizing radiation. Current research suggests that certain types of fibres manufactured by varying methods produce different results. The different responses to exposure from gamma irradiation between Germanium (Ge) doped optical fibres, with and without Hydrogen loading, along with the standard SMF-28 fibre with Hydrogen, were used and results noted and compared to previous work. The FBG’s in each fibre were …
Effect Of Thermal Annealing And Carbon Implantation On The Functional Properties Of Nanocomposite Tisin Coatings On Steel, Mohammad Shoeb Ahmed
Effect Of Thermal Annealing And Carbon Implantation On The Functional Properties Of Nanocomposite Tisin Coatings On Steel, Mohammad Shoeb Ahmed
Theses: Doctorates and Masters
This PhD research contributes to the part of advanced materials technology. The machining industry currently faces tremendous pressures with the need for durable cutting tools suitable for eco-friendly high speed machining operations becoming acute. In this thesis innovative design and synthesis strategies are explored to tailor the properties of nanocomposite coatings. Advanced characterisation techniques are applied to identify the mechanisms that control the mechanical, tribological, and corrosion behaviours of these coatings. Cutting tools protected by these coatings are anticipated to exhibit a unique combination of superior toughness and greater resistance to wear and corrosion, providing significant economic and environmental benefits. …
Surface Plasmons For Enhanced Metal-Semiconductor-Metal Photodetectors, Ayman A. Karar
Surface Plasmons For Enhanced Metal-Semiconductor-Metal Photodetectors, Ayman A. Karar
Theses: Doctorates and Masters
Surface Plasmon Polaritons (SPPs) are quantized charge density oscillations that occur when a photon couples to the free electron gas of the metal at the interface between a metal and a dielectric. The extraordinary properties of SPP allow for sub-diffraction limit waveguiding and localized field enhancement. The emerging field of surface plasmonics has applied SPP coupling to a number of new and interesting applications, such as: Surface Enhanced Raman Spectroscopy (SERS), super lenses, nano-scale optical circuits, optical filters and SPP enhanced photodetectors. In the past decade, there have been several experimental and theoretical research and development activities which reported on …
Multi-Wavelength Laser Sensor For Intruder Detection And Discrimination, Kavitha Venkataraayan, Sreten Askraba, Kamal E. Alameh, Clifton L. Smith
Multi-Wavelength Laser Sensor For Intruder Detection And Discrimination, Kavitha Venkataraayan, Sreten Askraba, Kamal E. Alameh, Clifton L. Smith
Research outputs 2011
An intruder detection and discrimination sensor with improved optical design is developed using lasers of different wavelengths to demonstrate the concept of discrimination over a distance of 6 m. A distinctive feature of optics is used to provide additional transverse laser beam scanning. The sample objects used to demonstrate the concept of discrimination over a distance of 6 m are leaf, bark, black fabric, PVC, wood and camouflage material. A camouflage material is chosen to illustrate the discrimination capability of the sensor. The sensor utilizes a five-wavelength laser combination module, which sequentially emits identically-polarized laser light beams along one optical …
Microstructure And Mechanical Properties Of Cold Drawn Steel Wires, Ning Liu
Microstructure And Mechanical Properties Of Cold Drawn Steel Wires, Ning Liu
Theses: Doctorates and Masters
Cold drawn eutectoid steel wires have been widely used for a variety of applications, such as suspension bridges, steel cords for automobile tires, and springs. Much research has been done to increase their mechanical strength. With advances in modern production technology, both the drawing speed and the quality of drawn steels have been enhanced. After a careful literature survey, it is obvious that some issues are still controversial. As Y.S. Yang, J.G. Bae and C.G. Park mentioned, the lamellar spacing, thickness and volume fraction of cementites have all reached the nanometer regime, and the conventional theory is not enough to …