Engineering Commons^™

Utilizing 3d Printed Analogue Soils To Investigate Specimen Size Effects In Triaxial Testing, Claire Louise Stewart

Graduate Theses and Dissertations

Triaxial testing is one of the fundamental laboratory tests used in geotechnical engineering to determine strength parameters, such as shear strength and friction angle. Investigating the minimum representative elementary volume (REV) can verify the independence of size effects on strength parameters and ensure that the scaled laboratory tests results are consistent, repeatable, and representative of field conditions. Although, REV has been studied for many applications, there is disagreement within geotechnical engineering of a minimum particle diameter to specimen diameter to minimize the size effects related to the REV in consolidated drained (CD) triaxial tests. This research study compared the strength …

Machine Learning Methods To Map Stabilizer Effectiveness Based On Common Soil Properties, Amit Gajurel

Boise State University Theses and Dissertations

Unconfined compressive strength (UCS) has been widely used as one of the primary criteria for the selection of optimum type and amount of chemical stabilizer for subgrade/base stabilization. Guidelines established by various state and federal agencies aid in selecting these optimum values by recommending an initial type and amount based on a wide range of soil index properties. A significant number of laboratory trials have to be done to establish the optimum type and amount of stabilizer for a given target strength. This process takes a copious amount of time, money, and the workforce. In addition to that, the finite …

Studying The Use Of Microbial Induced Calcite Precipitation As A Shallow Stabilization Alternative To Treat Expansive Soils, Tasria Rahman

Boise State University Theses and Dissertations

Expansive soils usually recognized as swell-shrink soils have been a problem for civil infrastructure for a long time. It has been a very common practice to use chemical stabilizers including cement and lime to stabilize expansive soils, especially for lightly loaded structures. However, due to the the detrimental effects of these stabilizers on the environment and several occurrences of premature failures after stabilizing with chemical additives, engineers are in search of sustainable stabilization alternatives. Microbial Induced Calcite Precipitation (MICP) is a promising process, which can improve the properties of expansive soil through calcite precipitation. Previous research has shown promise for …

Controlling Relative Humidity Using Glycerin, Juan Martinez

Civil Engineering Undergraduate Honors Theses

A series of tests were conducted to control relative humidity (RH) using a bubbler system that contained a series of glass jars and glass vials filled with different concentrations of glycerin. The relative humidity within the glass jars was measured. The total time interval for each laboratory test was 48 hours. During the first 24 hours a pump was used to bubble air through the glycerin solution. During the second 24 hours, the pump was turned off, and the RH within the system was monitored within the closed system. Target RH measurements from 100% to a 0% were obtained. The …

Electroósmosis: Un Método Para Mejorar El Suelo, Yenni Mariana Ramírez Mazo, Juan Pablo Osorio, Sergio Agudelo Florez

Articles

El suelo, ese que pisamos, recorremos, sobre el que construimos nuestras casas, escuelas, calles… ese en el que nos dicen que pongamos los pies cuando estamos algo distraídos, es más que simplemente tierra.

Laboratory Self-Weight Consolidation Testing Of Dredged Material Analyzed Using A One-Dimensional Finite Strain Consolidation Method, Artine Azimi

Master of Science in Civil Engineering Theses

Research has shown that the properties which govern the consolidation of dredged material are best determined using a one-dimensional finite strain consolidation theory. This method requires a complete relationship between void ratio and effective stress for all expected void ratios in a dredged layer, which can be determined from laboratory testing. The United States Army Corps of Engineers (USACE) suggests using a self-weight consolidation test apparatus to obtain void ratio/effective stress conditions for very low effective stresses. In this paper a modified laboratory testing method of a self-weight consolidation test is developed to obtain a range of void ratios and …

Measuring Liquefied Residual Strength Using Full-Scale Shake Table Cyclic Simple Shear Tests, Taylor R. Honnette

Master's Theses

This research consists of full-scale cyclic shake table tests to investigate liquefied residual strength of #2/16 Monterey Sand. A simple shear testing apparatus was mounted to a full-scale one-dimensional shake table to mimic a confined layer of saturated sand subjected to strong ground motions. Testing was performed at the Parson’s Geotechnical and Earthquake Laboratory at California Polytechnic State University, San Luis Obispo. T-bar penetrometer pullout tests were used to measure residual strength of the liquefied soil during cyclic testing. Cone Penetration Testing (CPT) was performed on the soil specimen throughout testing to relate the laboratory specimen to field index test …

Evaluation Of Synthetic Cpt And Soil Boring Data By Various Spatial Interpolation Techniques, Md Habibur Rahman

LSU Master's Theses

In order to incorporate the influence of collected in-situ data, the spatial correlation between the data and the foundation needs to be explored. However, risk and uncertainty are the characteristics of the soil that cannot be eliminated. Statistical information of the soil property can be estimated from available field data obtained from testing at discrete locations across the site. In this research, several well-established spatial interpolation methods like ordinary kriging (OK), simple kriging (SK), inverse distance weight (IDW), spline, natural neighbor (NaN) and universal kriging (UK) were incorporated to evaluate the best method. Six CPT (Cone penetration test) (Tip Resistance …

Prediction And Rehabilitation Of Highway Embankment Slope Failures In Changing Climate, Navid Jafari, Anand Puppala

Publications

Highway slopes constructed with clayey soil are prone to desiccation cracks due to wetting and drying weather cycle, which allows greater moisture infiltration into the embankment from precipitation. Fissures formed due to extended wetting and drying cycles allow water to seep deeper into the soil than surficial wetting and increase the water content. This increases the moisture content in the soil and results in reduction in shear strength to the fully softened strength. On the other hand, development of desiccation cracks and reduction of the soil matric suction ultimately result in higher hydraulic conductivity value which causes development of higher …

Sh-Mode Seismic-Reflection Imaging Of Earthfill Dams, Edward W. Woolery

Earth and Environmental Sciences Faculty Publications

Assessing subsurface characteristics and imaging geologic features (e.g., faults, cavities, low-velocity layers, etc.) are typical problems in near-surface geophysics. These questions often have adverse geotechnical engineering implications, and can be especially acute when associated with high-hazard structures such as large earthen flood-control dams. Dam-related issues are becoming more frequent in the United States, because a large part of this major infrastructure was designed and constructed in the early- to mid-twentieth century; these dams are thus passing into the latter stages of their design life, where minute flaws that were overlooked or thought to be insignificant in design/construction are now …

Development Of Environmentally-Friendly Stabilization Methods For Transportation Infrastructure Based On Geopolymers, Miladin Radovic, Anand Puppala

Publications

Geopolymers (GPs) have received much attention as an eco-friendly and sustainable alternative to conventional chemical additives, since they can be processed at room temperatures from aqueous solutions by utilizing waste materials (e.g. fly ash) or abundant natural sources (e.g. clay). A collaborative research study is carried out by teams from Texas A&M University (TAMU) and University of Texas at Arlington (UTA) to investigate the effectiveness of GPs for stabilizing base and subgrade materials by considering the strength and shrink-swell characteristics. Two types of clay, obtained from the North Dallas area, were mixed with a potassium-based GP synthesized from metakaolin and …

Field Instrumentations And Numerical Analysis Of Geosynthetic Reinforced Soil – Integrated Bridge System (Grs-Ibs), Allam Ardah

LSU Doctoral Dissertations

Geosynthetic reinforced soil (GRS) is a special soil with geosynthetic fabric closely stacked in layers as soil stabilization and considered an alternative design method to the conventional bridge support technology. In this research study, a field case study of Maree Michel bridge, which is located in Route LA 91 Vermilion Parish in Louisiana, was instrumented with six different types of instrumentations to monitor the performance of GRS-IBS bridge abutment and to develop 2D and 3D finite element models. The instrumentations include Shape Acceleration Array (SAA), earth pressure cells, strain gauges, piezometers, and thermocouples. Additionally, surveying was conducted at the bridge …

Physical Modeling Of Flow Nets In Groundwater And Determination Of Hydraulic Conductivity, Hannah Nicholas, Moses Karakouzian

AANAPISI Poster Presentations

The goal of this study is to physically model the paths that water particles take through soil, and estimate hydraulic conductivity for several soil configurations. Water paths, or flow lines, are shown by injecting dye into sand contained in a rectangular acrylic glass tank with a vertical barrier in the center; water is poured on one side of the tank and a pump is used to maintain constant head loss. If flow lines are formed, a flow net is to be drawn using photos of the tank and hydraulic conductivity is to be calculated.

This project consists of four phases: …

Coir Fiber Reinforced Concrete, Jose De La Serna, Moses Karakouzian

AANAPISI Poster Presentations

This poster exhibits the testing and research done on general Portland Cement Concrete with the addition of coir (coconut) fibers as reinforcement. Using the fundamental constituents of cement (water, cement, fine and coarse aggregate) and processed coir fiber, concrete specimens were batched to test for compressive and flexural strengths (per appropriate ASTM standards). Cylindrical and rectangular beam specimens were subjected to loadings until failure occurred. The capacity and modes of failures of the specimens were observed. It was determined that:

• The addition of processed coir fibers decreases the overall strength of general Portland Cement Concrete. • The tested concrete’s …

Evaluation Of Undrained Shear Strength And Soil Classification From Cone Penetration Test, Md Imran Hossain

LSU Master's Theses

The in-situ cone and piezocone penetration tests (CPT, PCPT) has been widely used by the geotechnical engineering community for subsurface soil characterization and classification, and for the evaluation of many engineering soil properties, such as undrained shear strength (s_u), unit weight (γ), constrained modulus (M), coefficient of consolidation (c_v), and stress history (OCR). The objective of this research study was to estimate the undrained shear strength of clayey soil using CPT/PCPT data in addition to some soil boring log data. At the same time, soil classification charts/methods based …

Geosynthetic Reinforcement For Unpaved Roads – Recent Experience, Ciaran Reilly, Keith Nell

Conference papers

Modern geosynthetic materials, including geotextiles and geogrids, are often used to generate savings in materials and time on construction projects. Geosynthetics are used as reinforcement and separation membranes for unpaved roads that are supported by low strength or unsuitable subgrades. When geosynthetics are used, unsuitable subgrades can be left in place and reduced thicknesses of road base are required. This paper reviews the design methods currently used to build geosynthetic reinforced unpaved roads and documents the validation of these design approaches. A number of recent case histories of projects in the UK and Ireland are outlined, showing the use of …

Modeling And Simulation Of Damage In The Brazilian Indirect Tension Test Using The Finite-Discrete Element Method, Jeremiah C. Leyba

Civil Engineering ETDs

The Brazilian indirect tension test is used to investigate possible correlations between progressive damage and associated permeability changes. The test offers ease of replicability with a damage behavior known to lead to fracture openings as a tool for interpreting the indirect tensile strength of concrete and rocks. This behavior can lend insight into the nature of tensile damage and fracture progression in association with changes in permeability. The nature of these brittle materials is known to exhibit rapid failures in the Brazilian indirect tension test and require a method to retard the progression of damage for the possibility of acquiring …

Evaluation Of Site Variability And Its Application In Design, Abu Hakim Muhammad Hasan Faisal

LSU Master's Theses

Geotechnical characterization has an important role in engineering geology as well as in implementation of any project. There are several variables and uncertainties involved in characterizing a project site. Four different sources of uncertainties represent the characterization of geotechnical variability, which include spatial variability, measurement error, statistical error and model bias. Spatial variability is expressed in terms of the mean, variance, and scale of fluctuation. Several statistical techniques such as the Gauge R & R, which includes X-Bar/R and ANOVA, and the Second Moment can be applied to compute site variability in terms of the coefficient of variations. Measurement error …

Understanding Asphalt Concrete Aging Using Nanoindentation, Hasan M. Faisal

Civil Engineering ETDs

Asphalt concrete (AC) is created by mixing liquid asphalt binder with solid aggregates. When asphalt binder is mixed with aggregates, it creates a thin film (about 7-16 microns thick) around the aggregate surface. Fine aggregate (smaller than 0.075 mm size) get entrapped within the binder film or mixed with the binder, and create a phase called mastic. Both asphalt film and mastic play significant roles in aging of asphalt pavement. To this day, tests were performed mainly on the bulk liquid asphalt, but not on the film or mastic. In this study, for the first time, nanoindentation tests were done …

My Catalyst, Gabrielle Gambino Lyon

Celebration of Learning

Over the course of my internship and shadow program with Pepper Lawson Construction and Ziegler Cooper Architects, I was able to explore the various career paths involved in the design, construction, and civil engineering fields. My work on the construction site of a high-rise apartment building located in the heart of Houston, TX allowed me first-hand experience working and learning alongside project engineers, contractors, building developers, and the construction team.

This project was the perfect confluence of my main areas of interest: structural, mechanical, civil, and environmental engineering, as well as architecture. My daily work consisted of on-site walk throughs, …

Automatic Monitoring System State Of Hydrotechnical Structures, O.V. Ruban

Gorniy vestnik Uzbekistana

The article outlines the possibilities for operational control of the technical condition of buildings. To this end, we propose integrated systems Trimble 4D Control (T4D) and ASKGTS "Titan", which provide automatic measurement and registration of physical quantities characterizing the state of the structure, as well as natural and technogenic parameters affecting the condition of the structure.

Analysis Of Drought Using Meteorological And Microwave Remote Sensed Data: A Case Of Wami Watershed, Tanzania, Deogratias Mulungu

Tanzania Journal of Engineering and Technology (TJET)

Agricultural sector is important for the economy of Tanzania, but in recent years there is decline in its growth and performance because of persistent droughts. An in-depth study of droughts was conducted on Wami watershed through rainfall and satellite microwave remote sensing data leading for estimates of meteorological droughts and soil moisture based droughts, respectively. Rainfall data during 1973-2008 was used to obtain Drought Severity Index (DSI) and active imaging microwave radar data during 1997-2009 from ESA’s SAR missions of ENVISAT and ERS was used to obtain soil moisture anomalies (SMA). Soil map was used to explain discrepancies in droughts …

Pore-Scale And Conventional Wettability Measurement Considerations For Improving Certainty Of Geological Co2 Sequestration, Mohammad Jafari

LSU Doctoral Dissertations

Parallel to the approach of developing zero-carbon-emission energies, other solutions have been recently proposed to decrease the amount of CO2 emissions into the atmosphere. Geological CO2 sequestration (GCS) has provided economic benefits and slight adverse environmental effects. GCS involves capturing CO2 from large producers, then injecting it into deep layers of the earth’s subsurface to be stored for hundreds to thousands of years. A safe and economic GCS requires a profound knowledge of immiscible CO2-water/brine fluid flow in CO2 storage sites including capillary pressure which has a barrier effect against leakage. The main uncertainty in measuring capillary pressure is due …

Lateral Behavior Comparison Of Driven And Screw Piles In Stiff Clay, Sophie Moore

Architectural Engineering

This study is concerned with the comparison of driven and screw piles when exposed to lateral forces and the effects of gapping on stiffness and displacement. Stiffness contributions were determined from force-displacement profiles, gap depth formation curves, strain profiles, bending moment profiles, and P-Y curves. Driven piles were found to be about twice as stiff as screw piles at lower displacements. At larger displacements, the stiffness of the two pile types start to converge. When the piles are in full contact with the soil, stiffness contribution is derived from both the soil and the pile. When gapping is exhibited, the …

Liquefaction-Induced Dragload And/Or Downdrag On Deep Foundations Within The New Madrid Seismic Zone, Ishimwe Elvis

Graduate Theses and Dissertations

Deep foundation elements are typically used to transfer structural loads for multi-story buildings and large-span bridges to a competent soil layer when 1) the soil close to the ground surface has no sufficient bearing capacity, and when 2) liquefiable soils are encountered. The majority of the bridges constructed within seismic zones rely upon the stability of earthen embankments and deep foundation that are installed above or within liquefiable soil deposits. Despite large factor of safety values or different load and resistance factors being used to adequately design deep foundations within seismic areas, soil liquefaction may cause extensive damage to the …

The Intrinsic Properties Of Reconstituted Soils, Nabeel Shaker Mahmood

Graduate Theses and Dissertations

Reconstituted specimens are often utilized to characterize engineering properties of cohesive soils. A series of undrained triaxial tests were conducted on reconstituted soil specimens to evaluate 1) the influence of stress path, 2) the intrinsic shear strength behavior, and 3) the small-strain characteristics. The stress path tests were conducted on kaolinite specimens reconstituted from slurries with water content values of one and one-half times the liquid limit of the soil (1.5LL). To evaluate the intrinsic undrained shear strength and the intrinsic small-strain properties, the triaxial tests were performed on kaolinite and illite specimens that were reconstituted at two levels of …

Development Of A Hydraulic Conductivity Placement Window Using Centrifuge Techniques, Greg Thomas

Civil Engineering Undergraduate Honors Theses

A centrifuge soil testing device, currently operated by researchers at the University of Arkansas, was used to develop a technique to determine a hydraulic conductivity placement window. The purpose of this research was to develop a placement window by means of a centrifuge instead of by means of a panel board. Soil specimens were created at standard PRcotor energy and at 50 percent of Standard Proctor energy at -3 percent of optimum, -1.5 percent of optimum, two specimens at optimum, +1.5 percent of optimum, and +3 percent of optimum water content. Values of hydraulic conductivity for the respective specimens were …

Introduction To Infrastructure - The Influence Of Natural Disasters On Infrastructure, Tri Tam Nguyen, Sean M. Raday, Daniel Leverick

STEM Student Research Symposium Posters

In this paper, three major hurricanes in 2017 were examined to determine the damage these hurricanes have done to the infrastructure. Infrastructure has an important role in the nation’s sustained economic development. Infrastructure consists of two main types which are “hard” infrastructure and “soft” infrastructure. Hard infrastructure is the physical networks which include transportation, power, etc. while soft infrastructure is institutions and human capital. Inadequate and inefficient performance of “hard” or “soft” infrastructure would prevent economy from achieving full growth. In the past decades, a significant increase in the number of natural disasters has had great impact on infrastructure systems. …

Hawai'i Wildlife Fund V. County Of Maui, Lowell J. Chandler

Public Land & Resources Law Review

In Hawai’i Wildlife Fund v. County of Maui, the Ninth Circuit held that the plain language of the Clean Water Act provides jurisdiction over indirect discharges of pollutants from a point source into groundwater that is shown to be connected to navigable waters. The court found that studies confirmed pollutants entering the Pacific Ocean were fairly traceable to the County of Maui’s sewage disposal wells. In affirming the district court’s ruling, the Ninth Circuit held that Maui County violated the Clean Water Act by discharging pollutants into a navigable water without the required permit. The court also concluded the …

Practical Overview Of Revised Section 918, Geosynthetics_Piccoli, Santino Piccoli

Purdue Road School

INDOT Standard Specifications Section 918, Geosynthetics, has been revised and updated, broadening the tools available to designers and contractors challenged with variable soil types and site conditions. The revision effort included harmonizing Section 200, 600, and 900 language relative to the design and use of geosynthetics. Section 918 broadly pertains to geosynthetics, which includes geotextiles, geogrids, geocells, geomembranes, and geocomposites. This session includes a practical discussion about specific changes to geotextile specifications and the addition of geotextile types.