Engineering Commons^™

Comparative Life Cycle Assessment Of Hemp Walls In Residential Construction In Morocco, Hicham Kaddouri, Rachida Elbarghmi, Firyal Latrache, Marwane Hammouti, Abderrahim Abidouche, Ismael Driouch

Journal of Sustainable Construction Materials and Technologies

This study analyzes the energy and environmental performance of hemp-based wall solutions applied to Moroccan residential buildings by combining dynamic thermal simulation and life cycle assessment (LCA). A reference building is assessed under four representative Moroccan climates (Al Hoceima, Oujda, Marrakech, and Ouarzazate), comparing a conventional wall retrofitted with hemp plaster and a wall incorporating hemp concrete. The results show that hemp concrete significantly reduces annual heating and cooling energy demands by 20–24% depending on the climate, with heating needs decreasing by up to 40% and cooling needs by approximately 15%, particularly in hot and arid regions. The LCA reveals …

Dual-Waste Integration For Geotechnical Improvement: Silica Fume And Eggshell Ash In Kaolin Soil Stabilization, Ng Jun Shen, Muzamir Hasan, Siti Sarah Eliyun, Md. Ikramul Hoque, Mohamad Afiq Jazrin Mohamad Sidek

Journal of Sustainable Construction Materials and Technologies

This study reveals the potential substitution of silica fume and eggshell ash in the technique of soil stabilization, varying across distinct proportions in the modification of geotechnical parameters. The untreated kaolinitic soil which has low soil bearing capacity in nature is frequently reflected in its mechanical instability, for instance, soil settlement and extreme compressibility. By associating the industrial and agricultural material, it is potentially to resolve the above-mentioned issues with explicit designs. A number of laboratory approaches have been implemented in the assessment of basic geotechnical properties, including grain size distribution, Atterberg limits, specific gravity, proctor properties, and shear strength …

Numerical Simulation Of Centrifugal Pump Performance Under Impeller Blade And Suction Diameter Variations, Gunawan Budi Santoso, Susanto -, Akhmad Nuriyanis, Anang Budhi Nugroho, Rizka Noor Miftakhul Ulum, Suyono -

Journal of Mechanical Engineering Science and Technology (JMEST)

The objective of this study is to model variations in pump geometry to obtain optimal performance under the effects of cavitation. The resulting geometric variation models were then simulated using ANSYS Fluent software. The first geometric variation model used a standard 5-blade impeller with suction pipe diameter variations of 2, 2 ½, 2 ¾, 3, 3 ¼, 3 ½, and 4 inches. The second geometric variation model for simulation used a standard 3-inch suction pipe with impeller blade variations of 3, 4, 5, 6, 7, 8, and 9. The simulation results indicated that the number of blades without changes in …

Chemistry Of Co2 Capture And Storage: From Molecular Interactions To Advanced Functional Materials, Nany Hairunisa, Hazim F. Abbas, Amamer M. Redwan

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

In light of the industrial development taking place, the burning of fossil fuels for transportation and electricity generation, and the accompanying carbon dioxide emissions, there is an urgent and continuing need to innovate methods of capture and storage, as well as competitive materials to address increasing carbon emissions. This review describes the importance of this procedure and the technologies that help solve this problem, some of which have been adopted by many countries and industrial institutions and differ in their efficiency, cost, and applicability.

Influence Of Altitude On The Energy Payback Time Of Grid-Connected Photovoltaic Systems: A District-Level Analysis In Himachal Pradesh, India, Aniket Sharma, Mohinder Singh

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

This study presents a district-level assessment of the influence of altitude on the Energy Payback Time (EPBT) of grid-connected photovoltaic (PV) systems in the Western Himalayan region of Himachal Pradesh, India. Although several studies have examined photovoltaic performance under different climatic conditions, systematic evaluation of altitude-sensitive EPBT using a standardized PV configuration remains limited for mountainous regions. A uniform 14.82 kWp polycrystalline PV system was simulated for twelve district headquarters representing elevations from 360 m to 3025 m above sea level using PVsyst software and Meteonorm meteorological data. Annual energy output and EPBT were evaluated under identical system configuration and …

Energy And Exergy Analysis Of Combined Cycle Power Plants: A Comprehensive Evaluation, Mohammad Ibrahim Hussein Hussein

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

Evaluating the thermodynamic performance of combined cycle power plants (CCPPs) requires a comprehensive understanding of both energy quantity and energy quality across highly integrated components, including the gas turbine, heat recovery steam generator (HRSG), steam turbine, and condenser. This study presents a structured critical review of recent developments in energy and exergy analysis of CCPPs, covering studies published between 2001 and 2025. Unlike previous descriptive summaries, this work introduces a comparative synthesis framework that critically evaluates component-level losses, thermodynamic irreversibilities, and system optimization strategies across conventional and advanced CCPP configurations. The review shows that the condenser is the dominant source …

Mitigating The Effects Of Poor Power Quality Conditions Using Adaptive Model Predictive Current Control, B. O. Akinloye, B. G. Ologunwa, A. A. Okubanjo

Al-Mustaqbal Journal of Sustainability in Engineering Sciences

Permanent Magnet Synchronous Motors (PMSMs) are susceptible to performance degradation in applications with poor power quality, such as those found in regions with unstable electrical grids. Conventional control strategies often fail to maintain stability and efficiency under simultaneous voltage sags and harmonic distortions. This paper presents an adaptive Model Predictive Current Control (MPCC) framework designed to enhance the resilience of PMSM drives under such composite disturbances. The proposed strategy integrates three key mechanisms: a real-time voltage sag compensation module that adjusts current references and employs flux-weakening, a multivector-based harmonic mitigation technique embedded within the predictive cost function, and a thermal …

Effect Of Naoh Concentration On The Structural, Morphological, And Tensile Properties Of Pineapple Stem Fibers, Ahmad Norca Kurnia Zen, Heru Suryanto, Aminnudin Aminnudin, Fajar Nusantara, Joseph Selvi Binoj

Journal of Mechanical Engineering Science and Technology (JMEST)

Natural fiber reinforced composites are increasingly being developed due to their environmentally friendly nature, low production costs, and safety for human health. However, the presence of lignin and hemicellulose reduces adhesion properties between fiber and composite matrix. Alkalization treatment is an effective way to remove lignin and hemicellulose attached to cellulose. This study aims to determine the optimum concentration of NaOH used during alkalization process of pineapple stem fiber. The methods included the retting process of fibers from pineapple stems. The obtained fibers were soaked in variations of 2%, 4%, 6%, and 8% NaOH for 4 hours,  then dried and …

Performance Evaluation And Sustainable Benefits Of Using Metakaolin And Recycled Steel Fibers In Concrete, Lova Raju Surla, Ramprasad Naik Desavathu, Raja Murugadoss Jeyaraju

Journal of Sustainable Construction Materials and Technologies

The rapid accumulation of waste vehicle tires and the increasing demand for cement pose significant environmental challenges through land pollution and CO2 emissions. The combined use of recycled steel fibers (RSFs) recovered from waste tires and supplementary cementitious materials (SCMs) offers a sustainable solution to these issues. This study investigates concrete incorporating 20% fly ash (FA), varying metakaolin (MK) contents (4–16%), and RSF dosages of 0.5–1.5%. Mechanical properties (compressive, split tensile, and flexural strengths) and durability characteristics (sorptivity, water absorption, chloride permeability, and homogeneity) were evaluated at 7, 28, and 90 days. Results showed that the mixture containing 20% FA …

Climate-Responsive Design For Sustainable Construction: Passive Strategies In Domestic Architecture Supporting Sustainability, Nahed Chakouf

Journal of Sustainable Construction Materials and Technologies

This study explores climate-responsive design in domestic architecture, focusing on the application and effectiveness of passive strategies across various climatic regions, including the UK, hot-arid, tropical, and cold climates. A qualitative comparative case study method was used to explore different passive design strategies, integration of sustainability, procurement, the coordination of stakeholders, and compliance with regulations in residential architectural projects under varying climate conditions. Drawing from a combination of historical case studies and original architectural projects, the research evaluates how spatial configuration, material selection, solar orientation, shading, ventilation, and insulation are optimized to achieve thermal comfort and energy efficiency. In temperate …

Magnetic Field-Induced Transformation In Polycrystalline Ni2mnal Heusler Type Magnetic Shape Memory Alloy, Choji J. Daches, Joseph W. Newkirk, Mario Buchely, Laura N. Bartlett

Materials Science and Engineering Faculty Research & Creative Works

The martensitic and magnetic transformations, as well as the mechanical properties, of Ni₂MnAl alloys in as-cast (AC) and heat-treated (HT) conditions were investigated. Magnetic-field-induced strain was evaluated via magnetostriction, with reversible strains of 0.14% and 0.2% achieved in the martensitic phase at 2 K for the AC and HT alloys, respectively. Transformation temperatures and Curie temperatures were determined under constant applied magnetic field, revealing that γ-phase inclusions in the AC microstructure suppress antiferromagnetic domain response, yielding a lower magnetization (∼8.4 emu g⁻¹) compared to the HT alloy (∼13.4 emu g⁻¹). Both alloys exhibited hysteretic behavior in the martensitic state and …

Li+/Na+ Hybrid Ion Conduction Mechanism In The Superionic Conductor Li3–XNaXZr2Si2Po12, Yi-Hong Wu, Xia Xie, Lei Zhu, Mu-Ran Yu, Guo-Tai Zhang, Jun-Chao Chen, Shu-Ying Sun, You-Wei Wang, Wei-Ping Tang

Journal of Electrochemistry

Hybrid ion conductors that transport multiple ionic conductive species provide a useful platform for understanding how mixed-ion transport governs ionic conductivity within a single phase. However, the controlled introduction of multiple mobile ions into solid-state electrolytes and a mechanistic understanding of their migration within the framework remain challenging. Herein, a skeleton-retained Li⁺↔Na⁺ cationic exchange was used to simultaneously induce Li⁺ and Na⁺ cations into the NASICON-type framework of Li_3–xNa_xZr₂Si₂PO₁₂ (0 < x < 3). We show that the interpenetration of NaO₆ and NaO₈ coordination polyhedra significantly influences the ionic conductivity of hybrid ion conductors. Computational …

Distinct Co2 Electroreduction Behaviors Over Planar And Non-Planar Cobalt Molecular Catalysts, Ru Jia, Cheng-Biao Zhu, Zi-Mo Zhang, Tuo Wang, Kai-Cong Yang, Guang-Zhe Wang, Yang Hu, Ting-Ting Zhang, Zhen-Wei Wei, Li Xiao, Gong-Wei Wang, Lin Zhuang

Journal of Electrochemistry

Molecular catalysts serve as ideal platforms for studying electrocatalytic reaction mechanisms. While current research mainly focuses on modulating central metals or surrounding ligands, the influence of molecular spatial configuration remains largely unexplored. Herein, we synthesized two cobalt complexes with similar ligand environments but distinct spatial geometries, a planar cobalt hexaazamacrocyclic complex (CoHAM) and a non-planar acyclic Co(phen)₂Cl₂, and evaluated their performance in CO₂ reduction reaction (CO₂RR). The planar CoHAM exhibited dramatically superior CO₂RR performance compared to the non-planar Co(phen)₂Cl₂. Through a series of combined analyses using in-situ …

Distribution And Transport Of Lithium Ions At Interfaces Between Graphite And Carboxymethyl Celluloses, Zi-Jun Huang, Zhen-Ying Zheng, Hua-Wei Cao, Jian Wang, Qing-Feng Zhang, Sheng-Li Chen

Journal of Electrochemistry

Carboxymethyl cellulose (CMC) is a water-processable binder widely used for graphite anodes. However, a microscopic understanding of why the identity of CMC counterions (Li⁺/Na⁺/K⁺) strongly affects electrode performance remains limited. Here, molecular dynamics (MD) simulations are used to track Li⁺ transport accessibility across electrolyte/CMC/graphite three-phase interfaces, comparing pure CMC-Li, CMC-Na, CMC-K, and mixed-counterion CMC binders. We find that CMC-Li sustains a continuous Li⁺ transport pathway from the electrolyte through the binder phase toward graphite. In contrast, in CMC-Na and CMC-K, Na⁺/K⁺ ions preferentially enrich at the graphite/binder interface, forming …

Physicochemical Properties And Chemical Compositions Of Cashew Nut Shell Liquid Extracted With Carbon Dioxide–Expanded Hexane, Neema Msuya, Joseph Yn Philip, Frank Jacob, Kando K. Janga

Tanzania Journal of Engineering and Technology (TJET)

Cashew nut shell liquid (CNSL) is a mixture of phenolic compounds that can effectively replace commercially available phenols in various applications. This study investigated the physicochemical properties and chemical composition of CNSL extracted using CO₂–expanded hexane (CXH) and compared to the traditional Soxhlet extraction method. Steamed cashew nut shells (sCNS) were used in both cases.  The CXH was carried under varying CO₂-mole fractions (0.468-0.892) and temperatures (20-36 °C) whereas Soxhlet extraction was performed at atmospheric pressure and hexane boiling point. Response Surface Methodology (RSM) with Central Composite Face-Centred Design (CCFD) was employed to evaluate the effect …

Hybrid Solar - Coal Thermal Energy System For Industrial Process Heat At Sayona Drinks Limited In Tanzania, Santos Kihwele, Elisha D. Bitesigirwe

Tanzania Journal of Engineering and Technology (TJET)

Over the past two decades, global efforts to mitigate pollution from conventional energy sources have intensified, with coal remaining a major contributor to carbon emissions. While fossil fuels cannot be eliminated from thermal generation in manufacturing industries, particularly in middle‑income countries such as Tanzania, they continue to dominate as the primary energy source. Industries including food and beverage, paper, textile, paints, chemicals, and pharmaceuticals require substantial thermal energy for heating and drying, and typically rely on coal and natural gas.This study introduces a unique application of a parabolic trough solar thermal system with integrated thermal energy storage, specifically tailored to …

Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani

Makara Journal of Science

Humidity sensors are pivotal in numerous sectors, such as environmental monitoring, industrial automation, and health-care. This study presents the fabrication and detailed evaluation of an advanced humidity sensor using ethyl cellulose (EC)-coated LaFe_0.925Ti_0.075O₃ (LFTO) perovskite nanoparticles synthesized via the sol-gel method. The LFTO nanopar-ticles exhibited a mesoporous structure with an enhanced surface area, which significantly improved their moisture adsorption capabilities. The innovative application of EC coating addresses critical substrate adhesion issues, enhancing mechanical stability without compromising sensor sensitivity. Comprehensive performance evaluations revealed minimal hysteresis (

Mae Enewsbrief January-March 2026, Department Of Mechanical And Aerospace Engineering, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Optimizing Graphene Oxide In Self-Compacting Concrete: A Sustainable Nano-Material Strategy For Enhanced Durability And Structural Performance, Mohammed Shakeebulla Khan, Vijaya G. S

Journal of Sustainable Construction Materials and Technologies

In order to reduce the environmental impact of the constructed world, advanced and sustainable construction materials are needed. This work is a summary of the comprehensive study on a novel self-compacting concrete with nano-engineered material (graphene oxide) modified self-compacting concrete (GO-SCC). The optimum dosage of GO was determined using Taguchi method, Analysis of Variance (ANOVA) and Response Surface Methodology (RSM) multi-objective statistical optimization method, and was found to be 0.10% by weight of cement (bwoc). This dosage of 0.10% GO led to the overall desirability score of 0.87, which confirmed that this was the optimum dosage for six response variables …

Beneficial Investigation Of Sustainable Recycled Waste Plastic In Treating The Consolidation Behavior Of Fine Soil, Aram Mohammed Raheem, Cumaraswamy Vipulanandan, Mohammed Hiwa Abdullrahman, Ali Tariq Omer

Journal of Sustainable Construction Materials and Technologies

Recycled waste plastic is one of the regular garbage utilized as a sustainable material in soil remediation. This study examines the efficacy of utilizing local recycled waste plastic as an ecological quantifiable along with soil containing fine particles to analyze the consolidation behavior. Various recycled waste plastic contents ranging from 2% to 10% were employed experimentally in two patterns where in the first pattern the recycled waste plastic were mixed as dry material with the fine soil particles while in the second pattern a sandwich layer of 10% of the recycled waste plastic was placed in the middle of the …

Enhanced Thermal Energy Storage In Buildings: Impregnation, Leakage, And Environmental Performance Of Organic And Inorganic Pcm Composites, Gökhan Genç, Esra Yılmaz, M. Yusuf Yazıcı

Journal of Sustainable Construction Materials and Technologies

This study experimentally investigates the impregnation and leakage performance of various organic (tobacco, sawdust, bay leaf, black cumin) and inorganic (vermiculite, perlite, bentonite, sepiolite) carrier materials used for phase change material (PCM) integration in building applications. The commercial paraffin-based PCM RT-31 was used as the thermal storage medium. Impregnation and leakage tests were conducted to evaluate the PCM absorption capacity, form stability, and energy storage potential of each carrier. The results revealed that perlite (C = 80%) and bay leaf (C = 78%) exhibited the highest impregnation capacities due to their porous and fibrous structures; however, they also demonstrated significant …

Modeling Of Tensile Stress-Strain Response For Steel Fiber Reinforced Self-Compacting Concretes, Anıl Niş, Nilufer Özyurt, Turan Özturan

Journal of Sustainable Construction Materials and Technologies

Main aim of the research was to further understand self-compacting concrete reinforced with steel fibers (SFR-SCC) behavior and to contribute modeling of the tensile stress-strain diagrams for the standardization of the fiber reinforced materials for structural utilization. Fiber reinforced materials has not been used without structural rebar because of the absence of stress-strain curve in tension required for the structural design codes. Hence, an inverse analysis (multi-layer model) was further modified for various steel fibers to predict tensile stress-strain behaviour. For this purpose, 5 different mixes; control, reinforced with long fibers with 0.5% and 1%, short fiber with 0.5% and …

Engineering Nanoelectrocatalytic Systems For Co2 And Nitrate Conversion Into Value-Added Chemicals, Abdelrahman Mohamed Abdelmohsen

Theses and Dissertations

The thesis addresses two major related environmental crises: nitrate pollution of water systems and the ever-increasing levels of atmospheric carbon dioxide. Both challenges are closely linked to anthropogenic disturbance of nitrogen and carbon cycles and require sustainable, energy efficient mitigation techniques. In this study, we investigate electrochemical conversion routes as a unified approach to convert these pollutants into value-added compounds: ammonia (NH3) via nitrate reduction (NO3-RR) and ethylene (C2H4) via carbon dioxide reduction (CO2RR). The first half of this work deals with the design and engineering of Cu-Zn alloy electrocatalysts for efficient NO3-RR. Tuning the alloy composition and surface nanostructure …

Moisture-Induced Degradation And Mechanical Durability Of Mineral-Filled Polylactide (Pla) Composites, Barbara Szaraniec, Aleksandra Ptaszkowska, Alicja Rapacz-Kmita

Journal of Sustainable Construction Materials and Technologies

This study investigates the influence of mineral fillers on the hydrolytic stability and mechanical durability of polylactide (PLA) composites under accelerated aqueous ageing conditions. Composites containing halloysite nanotubes (HNT) and bentonite-based fillers (BM, BS, BSP) at 2 wt.% were prepared using a powder-coating and injection moulding approach. Accelerated hydrolytic degradation was conducted at 50 °C for up to six weeks. The degradation behaviour was evaluated through mass variation, water absorption, incubation medium analysis (pH and electrical conductivity), mechanical testing, surface observations, and contact angle measurements. The results revealed a clear filler-dependent response. Bentonite-filled composites exhibited increased water absorption and accelerated …

Applications Of Geosynthetics In Tunnels Construction: A Sustainable Approach To Carbon Footprint Reduction, Ibraheem Rais, Abdullah H. Alsabhan, Md. Rehan Sadique, Shamshad Alam

Journal of Sustainable Construction Materials and Technologies

The use of geosynthetics has transformed tunnelling practices by enhancing structural integrity, durability, and environmental sustainability. This review adopts a systematic literature review design, covering publications from 2000 to 2025 sourced from Scopus, Web of Science, ScienceDirect, and Google Scholar. The selected studies were screened based on relevance, quality, and focus on tunnelling applications, then thematically analyzed into four domains: geosynthetic types, applications, sustainability, and performance evaluation. This review focuses on the applications of various geosynthetics, including geotextiles, geogrids, geocomposites, geocells, and geomembranes, in tunnelling projects. These materials play crucial roles in reinforcing tunnel walls and slopes, improving load distribution, …

Effect Of The Stacking Sequence And Number Of Ply Orientation In A Quasi-Isotropic Laminated Plate On In-Plane Shear Modulus And Failure Modes, Ann Larson

Master's Theses

Maximizing the shear modulus and strength, as well as predicting failure mode and location, when designing a stacking sequence of quasi-isotropic carbon fiber laminated plates is essential to predict stability, resistance to deformation, and overall stiffness of the structure. This research investigates the effect of the stacking sequence of quasi-isotropic laminated composite plate materials in accordance with ASTM D5379: Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method.

In this research, experimental testing and Finite Element Analysis (FEA) were first used on aluminum to validate the simulation process before applying it to composite materials. The …

Me3329 Modular Phonograph Gearbox, Garrett Andrik Leighton, Preston Robert Hupe, Gavin Carter Ebner, Andrew Renato Reyes

Mechanical Engineering

The Mechanical Engineering Department at California Polytechnic State University, San Luis Obispo (Cal Poly), seeks to develop a laboratory tool allowing students to reinforce concepts of gears for Mechanical Systems Design (ME329). Some current laboratories do not provide students with hands-on interaction, and the department lacks equipment and documentation to support a standardized lab. With ME329 expanding from ten to fifteen weeks, there is an opportunity to create a physical gearbox design lab allowing students to reinforce lecture material in engaging ways, while standardizing student learning. This senior project is presented and sponsored by Professor Alan Zhang. It will be …

Evaluation Of The Effect Of Vibration On Signal Reflection In Coaxial Cable Connectors For Vibration Sensing In Aircraft Structures And Systems, Saidanvar Esanjonovich Valiev, Anthony C. Okafor, Jeremiah J. Rittenhouse, Daniel S. Stutts, Jie Huang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper investigates the effects of vibration on signal reflection (S11) in aerospace data transmission line (ADTL) and commercial data transmission line (DTL) connectors for their alternative use as vibration sensors. The impact of vibration on the S11 signal was investigated on five ADTL and four DTL connectors at six vibration frequencies (20 Hz, 40 Hz, 80 Hz, 160 Hz, 320 Hz, and 640 Hz) and four vibration accelerations (0.5G, 1 G, 2 G, and 4G). The experiment was conducted using a split-plot design with a cable type assigned as the main-plot factor, with vibration frequency and acceleration as subplot …

Cal Poly Fluid Powered Vehicle Challenge 2025/2026, Ethan Malachi Nejame Zeiset, Christian Anthony Cuamani, Daniel Chacon-Bizarro, Marcus Minera, Bradley Hansell

Mechanical Engineering

In this Final Design Report, the Cal Poly Fluid Power Vehicle Challenge Contending Team competed in Sun Hydraulics’ 2026 Fluid Powered Vehicle Challenge. The objective of the competition is to expose college students to the fluid power sector, the “hidden giant” of the engineering industry. Specifically, student teams are tasked with the development of a human-powered, fluid-driven vehicle for use in various competitive settings. The team prioritized the optimization of an existing prototype for simplicity, ease of maintenance, and reliability during the competition. The existing prototype exhibited issues related to the main frame’s deflection under load, a lack of gear …

Computational Insights Into Nucleosome Dynamics In Epigenetics Using Molecular Dynamics Simulations, Rutika Patel

Dissertations, Theses, and Capstone Projects

Nucleosome core particles (NCP) are the building blocks that form a highly organized and compact chromatin structure. Nucleosomes package DNA in the nucleus of eukaryotic cells. The NCP consists of about 147 base pairs of DNA wrapped around the histone octamer, with 1.65 superhelical turns in a left-handed manner. The histone octamer is composed of two copies of H3, H4, H2A, and H2B. Together with histone H1 and linker DNA, they further assemble into a higher-order chromatin structure. The nucleosome complex is stabilized by electrostatic interactions between positively charged histone residues and the negatively charged DNA backbone. To effectively access …