Engineering Commons^™

Micro Wind Turbine - Modelling And Testing, Mohammad Uzair Bhati

All Theses

The global energy demand continues to rise as people consume more electricity to power their personal electronics, electric vehicles, and consumer products such as outdoor tools. To generate renewable energy, large scale solar and wind farms continue to receive the most commercial attention. However, portable wind energy turbines have the potential to generate sufficient power for cell phones and other electronic devices. There are two types of wind turbines, horizontal and vertical axis each having their pros and cons. Vertical-axis wind turbines are the main focus of this thesis, with a reduction in their form factor or size and portable …

A Critical Realist Erp Implementation In Zimbabwean Mining Industry Organisations, Jairos Mukwenha

Tanzania Journal of Engineering and Technology (TJET)

This research uses a critical realist framework to examine the factors influencing the success of enterprise resource planning (ERP) system implementation in Zimbabwean mining industry organisations. From the perspective of critical realism, the mining industry in Zimbabwe faces a complex interplay of opportunities and obstacles while implementing ERP systems. The deployment of ERP in mining firms is critically examined in this paper, emphasising how these systems might improve operational efficiency while considering Zimbabwe's particular socioeconomic circumstances. By exploring underlying structures, mechanisms, and outcomes, the research aims to identify critical challenges and opportunities and develop practical recommendations for improving ERP adoption …

Clustering Mini-Grids To Enhance Power Systems Reliability In Distributed Generation, Santos Kihwele

Tanzania Journal of Engineering and Technology (TJET)

This study investigates the effectiveness of clustering mini-grids as a method to improve the reliability and operational stability of distributed generation systems in remote areas, particularly where renewable energy sources are predominant. As renewable resources like solar and wind are increasingly integrated into mini-grids, these systems face various challenges, particularly in maintaining stable voltage and frequency across interconnected networks. Such issues are compounded by the intermittent nature of renewable energy sources and the lack of extensive communication infrastructure in rural or resource-constrained settings. To address these control challenges, this study applies droop control techniques to two mini-grids in Uganda, utilizing …

Synthetic Inertia Provision For Load Frequency Control In Networks With High Penetration Of Renewable Energy Sources, Paulina Mkoi

Tanzania Journal of Engineering and Technology (TJET)

The integration of renewable energy sources (RESs) such as solar photovoltaic (PV) and wind energy has become a promising solution as the world shifts toward clean energy. Solar PV and wind resources are increasingly replacing conventional synchronous generators, leading to reduced system inertia and increased vulnerability to frequency instability during disturbances. To address this challenge, this study proposes a novel synthetic inertia provision strategy using a battery energy storage system (BESS) integrated alongside solar PV. The proposed method dynamically compensates for the loss of inertia by considering the variability of solar PV output due to changes in irradiance and temperature. …

How Can The Adoption Of Biodegradable Packaging In The Beverage Industry Specifically Contribute To Reducing Single-Use Plastic Waste, And What Regulatory Or Cost-Related Challenges Hinder Its Widespread Implementation In Developing Countries?, Rebecca Aba Gaisie

2025 Awards for Excellence in Student Research and Creative Activity - Documents

This research investigates the potential of biodegradable packaging to reduce single-use plastic waste in the beverage industry and explores the regulatory and cost-related barriers to its adoption in developing countries. The beverage sector is a major contributor to global plastic pollution, and biodegradable alternatives offer a promising path toward sustainability. Using a mixed-methods approach, this study combines qualitative interviews with industry experts and case studies of businesses implementing biodegradable solutions, alongside quantitative survey data from 100 manufacturers and 200 consumers across Africa, Asia, and Latin America. Findings reveal that while biodegradable packaging significantly reduces plastic waste and appeals to environmentally …

Advancing Solar Farm Resilience: Cfd-Driven Wind Load Optimization, Aly Mousaad Aly

Faculty Publications

This study investigates wind load design methods for ground-mounted solar panels and arrays by comparing Computational Fluid Dynamics (CFD) simulations with design standards. A case study of a solar farm impacted by Hurricane Maria examines the effects of elevation height, tilt angle, and variations in the American Society of Civil Engineers (ASCE) standards on wind loads and structural failure. Turbulence models, including Reynolds Stress Model, k–ε Model, and Large Eddy Simulation (LES), are used to analyze wind pressures, lift, drag, and peak pressures. Results show Phase 1 experienced higher wind loads than Phase 2 due to design differences. A cost-benefit …

Performance Evaluation Of Novel And Efficient Integration Of Solar-Assisted Hvac System With Solar Humidification-Dehumidification Desalination System, Ahmed M. Khaira, Ahmed Hossam, M. M. Bassuoni, Mohamed Abdelgaied

Journal of Engineering Research

This paper aims to study the performance of a novel and efficient integration of a solar-assisted HVAC system with a solar humidification-dehumidification desalination system for hot climates. The proposed hybrid system aims to achieve thermal comfort conditions, produce freshwater, reduce the required power input, and reduce environmental pollution. To achieve this idea, we designed, constructed, and tested the novel hybrid system consisting of a solar-assisted HVAC system incorporated with a solar humidification-dehumidification desalination system. The device takes the rejected hot air that has passed over a solid desiccant and feeds it into a solar still to extract fresh water, while …

Numerical Investigation Of Heat Transfer And Pressure Drop In A Circular Microchannel Using Sio₂ Nanofluids, Mahmoud G. Abdelfatah, Osama E. Abd-Ellatif, Ahmed A. A. Attia, Abdelrady O. Elnady

Journal of Engineering Research

A numerical investigation was conducted to analyze the flow characteristics and heat transfer performance of a circular microchannel. using water and SiO₂+pure water nanofluids with volume fractions of 0.3%, 0.7%, and 1%. The microchannel was subjected to a constant heat flux of 100W, and the pressure drop, friction factor, and thermal resistance were evaluated for different Reynolds numbers ranging from 250 to 850. The results show that the addition of SiO₂ nanoparticles enhances the thermal performance of the microchannel by reducing the thermal resistance by up to 1.9% compared to pure water. However, the pressure drop increases with higher Np …

The Spice (Sustainable, Physics-Inspired Culinary Education) Lab – A Digestible Few-Nexus Educational Platform, Carla Ramsdell

National Collaborative for Research on Food, Energy, and Water Education (NC-FEW)

The SPICE (Sustainable, Physics-Inspired Culinary Education) Lab is a unique educational platform that enables participants from a wide disciplinary background to engage and become literate in the unique connections between food, energy and water. This small but mighty space allows for outreach education in many formats, including formal college courses, university-centered hands-on activities and public outreach.

The work performed in this space fills a unique need in the FEW-Nexus education opportunities because it is adaptable to many learners and learning opportunities and its focus on kitchen science makes these concepts approachable which can later be expanded to understand other critical …

Enhancing Wind Turbine Performance Using Flow Control Techniques: A Mini Review, Fady Nouh, Amr Ismaiel, Hasan Eleashy

Future Engineering Journal

In the face of escalating environmental concerns and the finite nature of non-renewable energy sources, the imperative for sustainable energy solutions has never been clearer. Among these solutions, wind energy emerges as a significant contender, poised to play a pivotal role in the global energy transition. Wind, a result of solar energy variations and Earth's topography, offers immense potential for electricity generation. Understanding wind patterns and harnessing its energy through efficient technologies like wind turbines is crucial. This paper explores diverse flow control methods, focusing on passive and active approaches in wind turbine configurations. It discusses advancements in the field …

Wind Turbine Rotor Test Stand, Ashlen Brooke Sperry, Cayley Mckee, Kristofer Lee Pascua, Francisco Medina

Mechanical Engineering

Dr. Lemieux and the mechanical engineering department at Cal Poly are renowned for the countless projects that allow students to be a part of hands-on learning and the “Learn by Doing” experience. One such experience is the wind energy class that requires students to design, build, and test wind turbine rotors; however, a test stand for these rotors is needed. Dr. Lemieux and the senior project team will design and build a test stand that will enable the simultaneous testing of two student-designed rotors at the existing wind turbine site. In addition to energy measurement, Lemieux emphasizes the importance of …

Design, Test, And Comparison Of A Photovoltaic Thermal Hybrid Solar Collector Utilizing A Thermosiphon, And Theory And Analysis Of Related Predictive Computer Model, Lance Brown

Master's Theses

Design, construction and testing of a photovoltaic thermal collector, or PVT, was completed to determine efficiency improvements of this system compared to a conventional solar panel and to find the thermal energy gained through hot water storage. Flow, driven by density changes from solar radiation, creates a thermosiphon, moving water without the use of a pump and ultimately drawing heat away from the solar panel. This is done to create a more efficient solar panel as well as decreasing potential damage due to high temperatures. Evaluation of electrical efficiency, thermal efficiency and flowrate allow for comparison between other PVT systems. …

Numerical Simulation Of Airflow Properties Of The Naca 6420 Airfoil Using The Transition Rans K-Ε Model, Oluwaseyi O. Alabi, Saidat A. Salisu, Oyeyemi T. Aforolagba -Balogun, Temitope A. Ladigbolu, Ayotunde O. Fasina, Anas Bala

Al-Bahir

This study investigates the airflow properties around the airfoil using numerical simulation, addressing the longstanding challenge of accurately predicting transition phenomena in turbulent flows. The importance of this research lies in its potential to improve the design and performance of airfoils in various engineering applications, such as wind turbines, and aircraft. A custom 2-dimensional airfoil model was created using Airfoil instruments, featuring a 6% maximum curvature, 40% curvature position, and 20% thickness. COMSOL Multiphysics software performed computations at a velocity of over 19 hours, with data analyzed at 60-minute intervals. The Transition turbulent model was employed to simulate the airflow …

Comparative Evaluation Of Linear Regression, Cross Validation And Regularization Approaches In Multivariate Data Analysis, Ransford Owusu, Felix Yeboah, Francis Effah Boateng

Data Science and Data Mining

This study evaluates linear regression and its enhanced variants incorporating cross-validation and regularization techniques for high-dimensional, multivariate datasets. We address challenges such as multicollinearity and overfitting. Methods including Ridge, LASSO, and Elastic Net are compared against ordinary least squares regression. Empirical analysis using an automobile dataset for fuel efficiency prediction shows that while OLS regression captures basic relationships, its limitations are mitigated through regularization and cross-validation, resulting in improved model interpretability. The findings provide a comprehensive framework for predictive modeling in complex data environments and offer insights into statistical methodology and practical applications in the automobile industry.

Optimization And Dft Study For Boosted Electooxidation Of Formic Acid At Niox Modified Pt Using Urea Derivatives As Blending Fuels, Aya Saada

Biochemical Engineering

This paper addresses the enhancement of formic acid electrooxidation (FAO) at Pt and Pt-NiOx nanoparticles based-catalysts assisted with urea derivatives as blending fuels. Blending formic acid with various ratios of urea derivatives showed noticeable enhancements of FAO as demonstrated by a favorable negative shift of its onset potential (Eonset) and increase of its peak current density concurrently with suppression of the amount of CO poisoning reaction intermediate. Among all the used derivatives, phenyl urea (PU) showed superior enhancing effect towards the direct FAO with a minimal CO formation together with a favorable negative shift of Eonset by 150 mV. The …

Long-Range Inertia Prediction Considering Contemporary Evolution Of Power Grid Networks, Peter M. Makolo

Tanzania Journal of Engineering and Technology (TJET)

Reduced network inertia due to high penetration levels of non-synchronous generators in modern power systems is becoming a pressing issue. As a result, very quick inertial responses are observed after contingency events in networks. Due to quick inertial responses, there is a practically very limited time interval for control actions in real-time. Thus, system operators need to understand the prior inertia values to plan, control, and operate the network securely. Long-range forecasting of the network's inertia values, in contrast to short-range forecasting techniques, can pinpoint when the network is most likely to be vulnerable in a reasonable time ahead. Thus, …

Evaluating Energy Efficiency And Thermal Performance In Egypt’S Social Housing: Climate-Responsive Design And Material Impact In Hot Desert Environments, Ahmed M. Hanafi, Mohamed A. Moawed, Osama E. Abdullatif

Journal of Engineering Research

As Egypt's urban areas expand rapidly, the demand for energy-efficient, affordable housing in extreme hot desert climates has become increasingly urgent. This study investigates the energy efficiency and thermal performance of Egypt’s Social Housing Project, with a focus on residential building in New Aswan City, where summer temperatures frequently exceed 45°C. Employing a validated energy model, this research simulates annual energy consumption for the building, which comprises 24 residential units, each approximately 86 m². The model integrates realistic occupancy schedules, region-specific weather data, and common household behavior patterns to closely reflect actual energy usage. Findings indicate a high alignment between …

Heavy Metals Pollution In Roadside Ecosystems, Lilian Matafu

Tanzania Journal of Engineering and Technology (TJET)

Heavy metals refer to metallic elements that are characterized by having a relatively high density and they are toxic or poisonous even at low concentration. They are environmental pollutant owing to toxicity and longevity in atmosphere and ability to accumulate in living things via bioaccumulation. They tend to enter in different system such as food chain. Analyses of water, soil sediment and the surrounding growing plants (Cynodon dactylon and Cyperus species) for selected heavy metals (Cd, Pb, Zn and Cu) were conducted on a roadside pond located at Boko MSB, Dar es Salaam. Pond water, soil sediments and plant samples …

A Bibliometric Analysis Of Pat-Seig Evolution As An Alternative Energy Generation Method, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

Pumps as Turbines (PATs) coupled with Self-Excited Induction Generators (SEIGs) as an alternative energy generation method have been the subject of significant research in recent years. This paper presents a bibliometric analysis of the evolution of PAT-SEIG technology as an alternative energy generation source. An analysis of a comprehensive dataset of peer-reviewed journal articles, conference proceedings, and patents related to PAT-SEIG systems, using advanced bibliometric techniques and PRISMA to identify key research themes, influential authors, the growth of the field and patterns of collaboration, and changes in research focus over time. Over a publication period of 32 years, a total …

Assessment Of Wind Speed Characteristics And Available Wind Power Potential For Electricity Generation In Tanzania, Mwingereza John Kumwenda

Tanzania Journal of Engineering and Technology (TJET)

The energy demand and its associated crises are attracting significant attention due to population increase and economic growth especially in developing countries. Fossil fuel-based energy source stand as a prominent anthropogenic resource but they are accompanied with increased carbon emissions and heightened environmental concerns. Renewable energy sources such as wind energy can offers a lot of potential for sustainable growth in the energy sector of developing nations like Tanzania. Thus, this work investigated wind speed characteristics and available wind power potential in six selected regions in Tanzania with different topographical features for future electricity generation. The data of the wind …

Efficient Operation Of Direct Coupled Solar Home Pv System: A Case Of Solar Home Pv System Installed In Dodoma, Tanzania, Sarah P. Ayeng'o

Tanzania Journal of Engineering and Technology (TJET)

Direct coupled Photovoltaic (PV) system is a common topology among most of the off-grid communities in the world. This topology has less components hence resulting in low investment costs. However, it suffers much losses when battery operating voltage is far from maximum power point voltage of PV modules. This scenario can be attributed by different factors such as; variation in solar radiation, load profile and temperature. Efficient operation of these systems is required in order to reduce losses. Usually in direct coupled system, PV modules are connected in parallel with batteries through a charge controller hence making PV output to …

Experimental Study On A Hybrid Solar Distillation System Integrated With A Photovoltaic Thermal Collector For The Co-Production Of Electricity And Freshwater, S. A. El Agouz, Mohamed Samy Abo Shala, Ayman Refat Abd Elbar

Journal of Engineering Research

This experimental study investigates the performance of a hybrid solar still system integrated with a photovoltaic (PV) panel and a cooling system, with the goal of enhancing both the freshwater productivity and the performance of the photovoltaic panel. Over a span of four consecutive days, four distinct experimental cases were tested in Tanta (Longitude/Latitude: E 31° 0′/ N 30° 47′), each with different cooling water flow rates of (3 L/min, 6 L/min, and 9 L/min) for cooling the lower surface of photovoltaic panel, and different hot water flow rates of (0.6 L/hr, 0.9 L/hr, and 1.2 L/hr) input to …

A Numerical Study On The Thermal Management Of Cylindrical Lithium-Ion Batteries By Immersion Cooling: Effect Of Coolant Distribution, Alhussein M. Abdel-Hafeez, Mohammed B. Effat, O. Hassan, N. Y. Abdel-Shafi

Journal of Engineering Research

Management of the temperature of lithium-ion batteries (LIBs) is critical for ensuring their safety and optimal performance. As the electric vehicle industry continues to evolve rapidly, the demand for efficient battery thermal management (BTM) technologies has grown. Among these, dielectric fluid immersion cooling (DFIC) has emerged as a particularly promising solution. In this study, we evaluate the impact of varying the coolant distribution on the performance of a cylindrical lithium-ion module comprising 20 cells. Coolant distribution was controlled by varying the number of coolant inlets from one to five, keeping the mass flow rate constant at 10 g/min. The performance …

Numerical Investigation Of Temperature Distribution Analysis For A Domestic Refrigerator With Different Duct Shapes, Faisal Elhabashy, A.A. Hawwash, Aly M.A. Soliman, Walid G. Alshaer

Journal of Engineering Research

The domestic refrigerator is one of the most home appliance used and the enhancement in its performance will has a significant effect on energy saving and environment. Preserving food at low and uniform temperatures is especially important to avoid Food spoilage and decreases the microorganisms. The aim of this study is to investigate numerically a different duct shapes to achieve an efficient cooling in the refrigerator and keep the temperature at the required range, using software called SIMULIA. The numerical model was developed to simulate the refrigeration system accurately, porous media and heat balance techniques were combined to the conservation …

A Review Of Performance Assessment Of Solar-Driven Absorption Chillers Incorporated With Energy Storage Systems, A. Khalil, Mohamed Abdelgaied, May Abdelsalam

Journal of Engineering Research

Abstract- This study evaluates the performance of a solar

collector absorption chiller combined with Phase Change Material (PCM) energy storage devices. Solar energy is used for energy-efficient cooling, and PCM storage improves

efficiency by capturing surplus thermal energy during

abundant solar radiation and releasing it when insufficient. The research assesses performance measures like

COP, energy storage capacity, and overall system efficiency.

Integrating Medical Plastic Waste Pyrolysis And Circular Economy For Environmental Sustainability, Attia Attia, Mohamed Bassyouni Prof., Reem Nasser Eng., Moataz El-Bagoury Eng., Islam Shaker Eng., Yasser Elhenawy Prof., Dina Aboelela Dr.

Biochemical Engineering

A critical assessment of pyrolysis technologies and reactor designs was discussed, highlighting various reactor configurations. This study explored the influence of catalysts, temperature, heating rate, and residence time on the pyrolysis process, and addressed their effects on product distribution and composition. Safety considerations and strategies for mitigating the potential environmental impacts of pyrolysis were presented. Comparative analyses of the environmental impacts of traditional waste disposal methods versus pyrolysis-based approaches provided insights into the potential reduction of greenhouse gas emissions and other pollutants. The circular economy approach was explored in the context of medical plastic waste pyrolysis. The potential for closing …

Feasibility Study Of A Smart Insole With Triboelectric Energy Harvesters For Early Flatfoot Detection, Mohammad Alghamaz

Mechanical Engineering Theses

This study introduces a self-powered smart insole system designed for real-time monitoring of foot health, with a specific focus on detecting flatfoot conditions. The insole integrates multiple triboelectric energy harvesters strategically positioned to capture electrical signals generated from ground reaction forces during daily activities such as walking, jogging, and running. Proof-of-concept testing was conducted on a single participant under two conditions: a healthy foot and a simulated flatfoot created by reducing the medial arch height by approximately 70\. In the healthy foot trials, the system demonstrated consistent and reliable performance, with negligible electrical output from the medial arch sensor, as …

One-Dimensional Numerical Analysis Of A Novel Elastohydrodynamic Seal For Supercritical Co2 Power Cycles With Experimental Validation And Future Approach, Cole B. Hayne

College of Graduate Studies: Theses & Dissertations

This thesis presents a numerical analysis and experimental verification approach for a novel elastohydrodynamic (EHD) seal designed with the specific application of supercritical carbon dioxide (sCO₂) power cycles. Brayton power cycles with sCO₂ as the working fluid have gained significant traction as potential large-scale power generation methods. This increase in interest and research is primarily due to their many beneficial characteristics, such as high thermal efficiency, compact geographic footprint, reduced capital costs, and lower water and fuel usage than comparable power cycles. Despite these many positive qualities, proper sealing technology remains one of the primary barriers to …

Nebraska Summary #1293: Fendt 618 Vario, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary #1292: Fendt 616 Vario, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …