Engineering Commons^™

Blind Detection In Channels With Intersymbol Interference, Raafat Edward Kamel

Dissertations

In high speed digital transmission over bandlimited channels, one of the principal impairments, besides additive white Gaussian noise, is intersymbol interference. For unknown channels, adaptive equalization is used to mitigate the interference. Different types of equalizers were proposed in the literature such as linear, decision feedback equalizers and maximum likelihood sequence estimation. The transmitter embeds sequences with the data regularly to help the equalizer adapt to the unknown channel parameters.

It is not always appropriate or feasible to send training sequences; in such cases, self adaptive or blind equalizers are used. The past ten years have witnessed an interest in …

Performance Analysis Of The "Fiber Distributed Data Interface (Fddi) Network" Using Petri Nets And Spnp Software Package, Savvas Eteoclis Christodoulou

Theses

The main purpose of this thesis is to model a "Fiber Distributed Data Interface" (FDDI) Network using Petri Nets, and to analyze its performance with the help of the SPNP software package. The verification of a communication protocol, by modeling it as a discrete-event system using Petri Nets is a new approach.

The correlation between the throughput rate, voice and data throughput, and the parameters of the system, such as the network load and the network speed are investigated. An overview of the "Fiber Distributed Data Interface" is provided, along with its network protocol and the limitations of its operating …

Characterization Of Lightning Induced Voltages On Overhead Power Lines, Wen-Ta Hsiao

Theses

The transient voltage surge caused by lightning is the major source contributed to the disturbance on power systems. The calculation of induced voltages, which is the propagated voltage surge on overhead power lines due to indirect lightning strokes, has been the subject of theoretical and experimental studies. The objective of this research is to develop a comprehensive numerical method to study the induced voltages on an overhead power line caused by a lightning return stroke with arbitrary shapes, for examples inclined lightning, zigzag lightning, etc.

A finite-length lightning channel of any direction in 3-D space has been modelled and closed-form …

Motion Compensation Using Correlation-Feedback, Zebiba Shifa

Theses

Motion compensation is widely used for exploiting temporal redundancies in the coding of image sequences. Accurate estimation of motion information in image sequences is important in motion-compensated coding. Different approaches have been used to estimate motion to obtain the motion-compensated frame difference signal.

This work uses the correlation-feedback approach to estimate the velocity or the optic flow of the moving image pixel. After the motion of the pixel is estimated. the motion-compensated frame difference signal is found by subtracting the current. frame from the predicted frame.

This correlation-feedback approach estimates the true motion vector of moving image accurately. Consequently, the …

A Novel Beam-Assisted Thickness Measurement Technique For Nanostructures, Luis Manual Casas

Theses

A novel method for measuring thickness of thin films has been developed. This method is straightforward, quickly accomplished, and offers resolution of device layers approaching that given by transmission electron microscopy. Ion beam bombardment of a multi-layer structure forms a crater in which the crater sidewalls are beveled at a very shallow angle, revealing various layers within the sample at a high degree of magnification. Beveled film thicknesses are measured by scanning Auger electron spectroscopy. Depth profilometry is used to measure the shallow beveling angle. Through knowledge of the beveled layer thickness and the bevel angle, actual film thicknesses are …

Programmable Microstrip Dipole Antenna Design, Jing Zhu

Theses

The narrow bandwidth of microstrip dipole antennas is a major limitation for many applications. A method to increase the microstrip dipole antenna bandwidth is illustrated in this thesis. The proposed method utilizes micromechanical actuators to adjust the electrical length of the dipole antenna. The length change is realized by the activities of several microactuators arranged on both arms of the antenna. The radiation pattern and input impedance, as well as the microactuator mechanisms are detailed in this thesis. A programmable microstrip dipole antenna including the microactuators has been designed with the feedline taken into consideration. The fabrication techniques for this …

Simulation Analysis Of Fddi Network Using Network Ii.5 Software Package, Anastassis A. Lazarides

Theses

In recent years, one of the most exciting advances in media has been the use of fiber optics in LANs. The bandwidth provided by Fiber Optic Technology has drastically increased the number of new applications that can be supported by communication networks. In order to support a variety of services, in 1986, the American National Standard Institute (ANSI) Accredited Standards Committee (ASC) X3, and the ASC X3T9.5 Task Group developed a new standard; the Fiber Distributed Data Interface (FDDI) [1]. This is a high speed (100 Mbps) optical communication network based on a token passing mode of operation. The Medium …

Deterministic And Adaptive Routing Algorithms For Mesh-Connected Computers, Yikui Cai

Theses

The two-dimensional mesh topology has been widely used in many multicomputer systems, such as the AMETEK Series 2010, Illiac IV, MPP, DAP, MasPar MP-1 and Intel Paragon. Its major advantages are its excellent scalability and simplicity. New generation multicomputer uses a switching technique called wormhole routing. The essential idea of wormhole routing is to advance a packet directly from incoming to outgoing channel without sorting it, as soon as enough information has been received in the packet header to select the outgoing channel. It has advantages of low latency and low error rate. The problems addressed by this thesis are …

Multi-Disk Subsystem Organizations For Very Large Databases, Zhiyi Huang

Theses

This thesis investigates efficient mappings of very large databases with non-uniform access to its data. to a. multi-disk subsystem.

Two algorithms are developed to distribute the database across multiple disks, possibly with replication, in order to minimize latency and maximize throughput. These algorithms are compared with respect to the amount of replication overhead incurred to achieve desired throughput.

A simulator is developed to simulate these two mapping algorithms and investigate the efficiency of these two mappings.

Fast Adaptive Algorithms For Signal Separation, Robert A. Manzo

Theses

LMS and RLS type algorithms are suggested for decorrelation of multi-channel systems outputs. These algorithms act as signal separators when applied to unknown linear combinations of the inputs. The performance of the suggested algorithms is compared with that of the conventional LMS and RLS algorithms that minimize the mean square error. It. is shown that the correlation matrix eigenvalue spread associated with the LMS decorrelator is always smaller than the eigenvalue spread corresponding to the conventional LMS. resulting in faster convergence speed for the decorrelator. A new RLS type decorrelator algorithm is suggested. The RLS decorrelator is shown to be …

Narrow-Band Interference Rejection In Spread Spectrum Using An Eigen Analysis Based Approach, Aparna Vadhri

Theses

A new adaptive technique is suggested for rejecting narrow-band interferences in spread spectrum communications. When data is coded using a pseudo-noise code, the received signal consists of a wide-band signal with almost white spectral properties, thermal noise, and correlated narrow-band interferences. A new approach is proposed which exploits the statistical properties of the received signal via eigenanalysis of the received data. While the energy of the wide-band signal is distributed over all the eigenvalues of the signal autocorrelation matrix, the energy of the interference is concentrated in a few large eigenvalues. Hence, the eigenvectors corresponding to the large eigenvalues are …

Interference Cancellation By Time Adjustable Sampling, Josko Zec

Theses

The problem of improving the frequency response of linear arrays is addressed in this thesis. The improvement is measured in the level of rejection of the undesired sources. A new, simple, and practical method is suggested. It is based on adjusting the sampling time in selected channels. Interference cancellation for finite bandwidth signals is accomplished only at, or close to, the carrier frequency. Wideband cancellation requires additional hardware and computational complexity. Conventional way of the wideband interference cancellation utilizes tapped delay line adaptive filters in each channel.

The Time Adjustable Sampling (TAS) method achieves a part of the tapped delay …

A Current-Mode Fdnr Circuit Element Using Capacitive Gyrators, Vladimir I. Prodanov, Michael M. Green

Electrical Engineering

A current-mode implementation of a frequency-dependent negative resistance (FDNR) element is presented using a novel capacitive gyrator. This FDNR element lends itself well to the design of low-pass ladder filters and its use will result in a more efficient integrated circuit implementation than filters that simulate floating inductors using resistive gyrators.

Reducing Respiratory Artifacts In Chest Mr Images Through Hybrid Space Motion Tracking And Postprocessing, John N. Campbell, Wesley E. Snyder, Peter Santago Ii, Sarah A. Rajala, Craig A. Hamilton

Sarah A. Rajala

A new postprocessing method of correcting for respiratory motion induced artifacts in MRI is presented. The motion of the chest during respiration is modeled as a combination of translation and dilation. Displacements of the chest wall are tracked via a thin, MR-sensitive plate placed on the patient's chest during a scan. Scanning with phase encoding left/right (L/R) and frequency encoding anterior/posterior (A/P) causes the motion artifacts to be repeated in the L/R direction, thus not overlapping on the plate. By performing the inverse A/P Fourier transform, the resulting hybrid space data has A/P spatial data and L/R spatial frequency data, …

The Evaluation Of Device Model Dependence In The Design Of A High-Frequency, Analog, Cmos Transconductance-C Filter, Susan Rose Brotman

Dissertations and Theses

It is important to have the ability to predict the effects of device model variation when designing integrated transconductance-C type active filters. Applying these filters to integrated circuit design has become increasingly popular due to its ease of implementation in monolithic form. With the introduction of fully automated design tools, predictable behavior of high-level variables becomes still more important. The purpose of this study is to evaluate the process parameter spread of analog device models to determine the effect on the design parameters of an active filter. This information's significant contribution directly effects the feasibility and realization of automating analog …

High-Frequency Analog Voltage Converter Design, Ping Xu

Dissertations and Theses

For many high-speed, high-performance circuits, purely differential inputs are needed. This project focuses on building high-speed voltage converters which can transfer a single-ended signal to a purely differential signal, or a differential input signal to a single-ended signal. Operational transconductance amplifier (OTAs) techniques are widely used in high-speed continuous-time integrated analog signal processing (ASP) circuits because resistors, inductors, integrators, buffers, multipliers and filters can be built by OT As and capacitors. Taking advantage of OT As, very-high-speed voltage converters are designed in CMOS technology. These converters can work in a frequency range from DC (OHz) up to lOOMHz and higher, …

Constraint Objects, Divesh Srivastava, Raghu Ramakrishnan, Peter Revesz

CSE Conference and Workshop Papers

We describe the Constraint Object Data Model (CODM), which enhances an object-based data model with existential constraints to naturally represent partially specified information. We present the Constraint Object Query Language (COQL), a declarative, rule-based query language that can be used to infer relationships about and monotonically refine information represented in the CODM. COQL has a model-theoretic and an equivalent fixed-point semantics, based on the notions of constraint entailment and "proofs in all possible worlds." We also provide a novel polynomial-time algorithm for quantifier elimination for set-order constraints, a restricted class of set constraints that uses membership of subset-equal.

On Issues Of Equalization With The Decorrelation Algorithm : Fast Converging Structures And Finite-Precision, Andrew James Bateman

Theses

To increase the rate of convergence of the blind, adaptive, decision feedback equalizer based on the decorrelation criterion, structures have been proposed which dramatically increase the complexity of the equalizer. The complexity of an algorithm has a direct bearing on the cost of implementing the algorithm in either hardware or software. In this thesis, more computationally efficient structures, based on the fast transversal filter and lattice algorithms, are proposed for the decorrelation algorithm which maintain the high rate of convergence of the more complex algorithms. Furthermore, the performance of the decorrelation algorithm in a finite-precision environment will be studied and …

The Design Of An Augmentative Communications Device, Darren Blaser, Scott Sorenson

Undergraduate Honors Capstone Projects

There is an extremely large number of people in the modem world who have difficulty communicating. Among these are approximately 25 million people with cerebral palsy. Cerebral palsy is a disability that is usually caused during, or shortly after birth. Cerebral palsy usually affects a person's motor skills and sense of balance, often rendering them incapable of speaking clearly enough to be understood well. Because this group of people cannot communicate as effectively as other individuals, many uninformed people suppose they do not have as great a need to speak, to say things like, "How are you?", ''I'm Hungry", "Thank …

The Effects Of Channel Curvature And Protusion Height On Nucleate Boiling And The Critical Heat Flux Of A Simulated Electronic Chip, John E. Leland

Office for Research Publications and Presentations

The quest for higher power yet smaller electronics has given rise to the need for very effective cooling of these electronics. Because one of the foremost problems in electronics cooling is achieving high heat flux cooling within small packages while expending minimal pumping power, one focus of this study was to investigate the effects of channel curvature on the CHF. Experimental data were obtained for flow rates of 1-7 m/s, subcoolings of 5-35"C, and radii of curvature of 25.4 and 50.8 mm. A correlation was obtained for these data which provided an excellent fit.

One condition that has been ignored …

High Resolution Liquid Crystal Phase Grating Formed By Fringing Fields From Interdigitated Electrodes, Gregory P. Nordin, M. Friends, J. M. Jarem, S. T. Kowel, J. H. Kulick, T. Leslie, R. G. Lindquist

Faculty Publications

We report the formation of thin anisotropic phase gratings in a nematic liquid-crystalline film by use of lateral (fringing) electric fields induced by transparent interdigitated electrodes. These gratings yield high diffraction efficiency (>30%) with a strong dependence on the readout beam incidence angle. In addition, the formation of a defect wall is observed that has a significant effect on the diffraction properties of the phase grating.

Advanced Navigation For Planetary Vehicles Applying An Approximate Mapping Technique, Timothy R. Mcjunkin

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis provides a method for compressing the information provided by JPL Mars rover obstacle sensors by creating an approximate map of the terrain around the vehicle. This thesis demonstrates that this method provides adequate information for a human operator to negotiate complex obstacles fields.

By dividing the area around the vehicle into regions and classifying each region as to how dangerous (impassable), the sensor data can be accumulated with minimal overhead. The terrain in each region has a number between zero and one, with zero meaning completely passable and one meaning completely impassable. A continuum of possible values between …

Electrical And Crystallographic Characterization Of Cdte Grown By The Vapor Transport Method, Jack L. Boone, Gene Cantwell, W. C. Harsch, J. E. Thomas, B. A. Foreman

Electrical and Computer Engineering Faculty Research & Creative Works

Crystallographic and electrical characterization techniques were performed on CdTe single crystal samples grown by the sublimation and physical vapor transport (SPVT) technique. The SPVT growth process described here has resulted in the routine growth of 45-50 mm diameter, 250-300 g boules of single crystal CdTe. As-grown material is p-type in the 5-10 ω cm range. Etch pit densities (EPD) are nominally 7x104 cm-2 along the [111] growth direction and 3x104 cm-2 along the [111] direction. X-ray full width at half maximum (FWHM) on recent samples is 8.6 arc sec compared to 8.5 arc sec theoretical. The as-grown p-type material displays …

Multirate Time-Frequency Distributions, John R. O'Hair

Theses and Dissertations

Multirate systems, which find application in the design and analysis of filter banks, are demonstrated to also be useful as a computational paradigm. It is shown that any problem which can be expressed a set of vector-vector, matrix-vector or matrix-matrix operations can be recast using multirate. This means all of numerical linear algebra can be recast using multirate as the underlying computational paradigm. As a non-trivial example, the multirate computational paradigm is applied to the problem of Generalized Discrete Time- Frequency Distributions GDTFD to create a new family of fast algorithms. The first of this new class of distributions is …

Fluttering Fountains: Stability Criteria, Lee W. Casperson

Electrical and Computer Engineering Faculty Publications and Presentations

The fluttering oscillations that have long been seen in falling sheets of water have recently been subjected to detailed theoretical analysis. In this study stability criteria for these oscillations are derived and discussed. These criteria provide insight into the physical mechanisms of the instability and may be employed in the design of fluttering waterfall systems.

An Analysis Of The Linked-Pulse In Steady-State Free Precession In Mri, Fang Li

Dissertations and Theses

The steady-state free precession (SSFP) is one type of the fast scanning technique in MRI. So far most of its analysis are concentrated on the gradient echo SSFP (GR SSFP), very few paper discuss the spin echo SSFP (SE SSFP), and they are usually based on the simplified the hard pulse assumption. The advantage of the SE SSFP is that it can refocus the dephasing caused by the magnetic field inhomogeneity, which is the disadvantage of the GR SSFP. Also the hard pulse model can provide very limited information.

The purpose of this paper is to establish the soft pulse …

Developing A Benchmark For Evaluating The Performance Of Parallel Computers, D. Ladd Williamson

Undergraduate Honors Capstone Projects

This paper discusses the development of a portable suite of benchmarking programs for parallel computers. Comparative measurement of the performance of parallel computing systems has been limited because of the great diversity of architectures and of processor interconnection schemes. One solution is to translate benchmark codes into a consistent and portable parallel language. This paper reports on progress in developing such a portable suite of benchmarks. An extensive introduction to parallel computing is included as an appendix, to provide a thorough understanding of the factors complicating development of the performance suite. Key to the development was the use of p4, …

Donor Complex Formation Due To A High-Dose Ge Implant Into Si, Ashawant Gupta, M. Mahmudur Rahman, Jianmin Qiao, Cary Y. Yang

Electrical and Computer Engineering

To investigate boron deactivation and/or donor complex formation due to a high‐dose Ge and C implantation and the subsequent solid phase epitaxy, SiGe and SiGeC layers were fabricated and characterized. Cross‐sectional transmission electron microscopy indicated that the SiGe layer with a peak Ge concentration of 5 at. % was strained; whereas, for higher concentrations, stacking faults were observed from the surface to the projected range of the Ge as a result of strain relaxation. Photoluminescence (PL) results were found to be consistent with dopant deactivation due to Ge implantation and the subsequent solid phase epitaxial growth of the amorphous layer. …

Use Of Extrapolation In Computing Color Look-Up Tables, Sarah A. Rajala, H. Joel Trussell, Atish P. Kakodkar

Sarah A. Rajala

Colorimetric reproduction requires calibrated color output devices. One way to characterize a color output device is with a 3D look-up table which maps the tristimulus values, t, to the control values, c of the output device. The functional form of the output device can be written in vector notation as t equals F(c). The purpose of calibration is to define an inverse mapping from tristimulus values to control values. Since the function F((DOT)) has no closed form, it is defined by interpolation from a table of values. Given a set of control values ]ci[ on a regular grid and the …

Optimal Kernel Development For Real-Time Communications, Monica G. Beltran

FIU Electronic Theses and Dissertations

The purpose of this research is to develop an optimal kernel which would be used in a real-time engineering and communications system. Since the application is a real-time system, relevant real-time issues are studied in conjunction with kernel related issues. The emphasis of the research is the development of a kernel which would not only adhere to the criteria of a real-time environment, namely determinism and performance, but also provide the flexibility and portability associated with non-real-time environments. The essence of the research is to study how the features found in non-real-time systems could be applied to the real-time system …