Engineering Commons^™

การประยุกต์ใช้เหล็กกล่องเติมด้วยคอนกรีตกำลังสูงเป็นเสาในโครงสร้างที่พักอาศัย, พีรดนย์ ลอออรรถพงศ์

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้มีวัตถุประสงค์เพื่อศึกษาและประเมินสิทธิภาพของโครงสร้างเหล็กกล่องเติมด้วยคอนกรีตกำลังสูง (High-Strength Concrete-Filled Steel Tube, HSCFST) สำหรับการประยุกต์ใช้กับบ้านพักอาศัย อันเป็นการตอบสนองต่อปัญหาการขาดแคลนแรงงานฝีมือ การเพิ่มขึ้นของค่าแรง และความจำเป็นในการลดระยะเวลาการก่อสร้างและต้นทุน การศึกษาได้พิจารณากรณีบ้านพักอาศัยสูง 3 ชั้น จำนวน 4 หลัง โดยทำการจำลองโครงสร้างด้วยโปรแกรม ETABS เพื่อตรวจสอบพฤติกรรมการรับแรงในแนวดิ่งและแรงจากแผ่นดินไหวของโครงสร้าง ซึ่งการออกแบบเสาเหล็กกล่องเติมด้วยคอนกรีตกำลังสูงอ้างอิงมาตรฐาน AISC 360-22 (LRFD) ผลการออกแบบพบว่าสามารถลดขนาดเสาให้เล็กลงเหลือ 125 มิลลิเมตร และ 150 มิลลิเมตร เพื่อให้มีขนาดไม่เกินความหนาของผนังบ้านได้เมื่อใช้คอนกรีตที่มีกำลังรับแรงอัดสูงกว่า 60 เมกะปาสคาล ร่วมกับเหล็กกล่องชนิดที่มีจำหน่ายในท้องตลาด โดยโครงสร้างที่ได้ออกแบบทั้ง 4 หลัง พบว่ามีประสิทธิภาพในการรับน้ำหนักบรรทุกและแรงแผ่นดินไหวดีกว่าโครงสร้างคอนกรีตเสริมเหล็กแบบเดิมในทุกด้าน ทั้งยังพบว่ามีต้นทุนการก่อสร้างที่ต่ำกว่าเสาคอนกรีตเสริมเหล็กอย่างมีนัยสำคัญ นอกจากนี้ยังได้ทำการทดสอบเสาเหล็กกล่องเติมด้วยคอนกรีตกำลังสูงในห้องปฏิบัติการ เพื่อเปรียบเทียบกำลังรับแรงอัดกับค่าที่ได้จากสมการทำนายตามมาตรฐาน AISC 360-22 พบว่าค่าที่ได้จากการคำนวณมีค่าต่ำกว่าผลการทดสอบจริงค่อนข้างมาก ส่งผลให้เกิดความมั่นใจยิ่งขึ้นต่อการนำเสาเหล็กกล่องเติมด้วยคอนกรีตกำลังสูงไปใช้จริงในงานก่อสร้างบ้านพักอาศัย

Centralized Deep Reinforcement Learning For Homogeneous Multi-Component Maintenance Optimization, Joseph W. Wittrock

Theses and Dissertations

This thesis explores an application of reinforcement learning (RL) in maintenance optimization. Recent advances in hardware-accelerated computation and deep learning have made RL a powerful tool for solving optimization problems which are too complex for traditional methods. Maintenance optimization involves improving the efficiency and effectiveness of maintenance activities through data-driven approaches, ultimately reducing costs and increasing asset availability. Making informed maintenance decisions is crucial to long-term sustainability.

A desirable maintenance policy maximizes a utility signal while minimizing the cost of maintenance. Techniques in sequential decision making such as dynamic programming (DP) and RL have found success in optimizing these maintenance …

Influence Of Deck Area And Average Daily Traffic On The Deterioration Of Bridge Superstructures., Faysal Ahamed

Graduate Theses, Dissertations, and Problem Reports (ETD)

State Departments of Transportation (DOTs) are responsible for maintaining approximately 623,000 bridges across the United States. Effective bridge management requires a comprehensive understanding of the factors influencing structural deterioration. Numerous studies have explored the effects of average daily traffic (ADT) and deck area (DA) on bridge deck deterioration. Given the interdependence between bridge decks and superstructures, it is plausible that ADT and DA significantly influence superstructure condition ratings and deterioration trends. However, their impact on superstructures remains insufficiently studied. In addition, existing studies primarily focus on overall bridge deterioration without adequately differentiating between superstructure designs and materials and maintenance authorities. …

Development Of A Spss-Based Prediction Model To Evaluate ‎Volatile Organic Compounds During Trenchless Cured-In-Place Pipe Method, Salar Bavili Nezhad

Civil Engineering Dissertations - Archive

The Cured-in-Place Pipe (CIPP) method is a widely implemented trenchless technology for the rehabilitation of deteriorated pipelines, offering benefits such as cost-effectiveness and reduced surface disruption. However, the CIPP installation process, particularly during curing, raises concerns over the emission of Volatile Organic Compounds (VOCs), which can adversely impact worker safety, public health, and environmental standards. This dissertation aims to address these concerns by evaluating VOC emissions during CIPP installations and developing a predictive model to guide emission management practices.

A comprehensive field study was conducted, collecting air samples from 15 pipeline rehabilitation sites that utilized different site-specific conditions using non-Styrene …

Development Of Supervised Machine Learning-Based Life-Cycle Cost Estimation And Prediction Models For Comparative Sewer System Rehabilitation Using Open-Cut And Trenchless Cured-In-Place Pipe Methods, Gayatri R. Thakre

Civil Engineering Dissertations - Archive

Aging wastewater infrastructure in the United States demands renewal strategies that balance cost-effectiveness, sustainability, and minimal social disruption. Conventional open-cut pipeline installation (OCPI) involves extensive excavation and restoration, whereas trenchless alternatives such as Cured-in-Place Pipe (CIPP) Renewal Technology offer reduced surface disturbance and environmental impacts. However, existing studies primarily focus on Construction Costs (CC), neglecting integrated life-cycle evaluations that also account for Environmental Costs (EC) and Social Costs (SC).

The primary objectives of this research are to develop supervised machine-learning (ML) models to estimate and predict CC in 2025 US dollars (USD) per linear foot of OCPI and CIPP Renewal …

Development Of A Drone-Assisted Pavement Management Framework Based On The Pavement Condition Index For University Parking Lots, Omesh Pasuluru

Civil Engineering Theses - Archive

Efficient pavement management is essential for keeping university parking lots in good condition. At the University of Texas at Arlington, parking areas experience heavy use and environmental wear, which can cause damage if not addressed early. Traditional methods for assessing pavement conditions are time-consuming, interrupt daily activities, and are expensive. Hence, there is a need for better solutions. This study introduces a drone-based pavement management approach that uses the Pavement Condition Index (PCI) system. The PCI is a numerical scale from 0 to 100 that rates pavement quality based on surface condition. A high PCI score (85-100) indicates the pavement …

Field-Curing Methods For Evaluating The Strength Of Concrete Test Specimens, Pranshoo Solanki, Haiyan Xie

Faculty Publications – Technology

The purpose of this combined laboratory and field study was to evaluate field-curing methods of concrete specimens for estimating the early opening strength of an in-place concrete item. One Illinois Department of Transportation (IDOT) class PV mix was used to cast cylinders, beams, and in-place concrete slabs in October 2021 and February 2022. Concrete cylinders were cured using three methods: ambient air (method #C1), an insulated box/cooler (method #C2), and a power-operated box (method #C3). Beams were cured using two methods: ambient air (method #B1) and an insulated plywood box (method #B2). The cast-in-place specimens from each slab and cylinder …

พฤติกรรมการเปลี่ยนช่องจราจรบริเวณจุดรับส่งผู้โดยสาร, ศุภวิชญ์ มัธยมนันทน์

Chulalongkorn University Theses and Dissertations (Chula ETD)

ในสภาพการจราจรจริง การไหลของกระแสจราจรมักถูกรบกวนจากยานพาหนะที่จอดเพื่อรับ–ส่งผู้โดยสาร ส่งผลให้ยานพาหนะที่ขับขี่ตามมามีสองทางเลือก ได้แก่ การรอให้ยานพาหนะด้านหน้าเคลื่อนตัวต่อไป หรือการเปลี่ยนช่องจราจรไปยังช่องที่สามารถเคลื่อนที่ได้ ซึ่งทั้งสองทางเลือกล้วนทำให้ประสิทธิภาพการไหลของจราจรลดลงเมื่อเทียบกับกรณีที่ไม่มีการรบกวนดังกล่าว ในปัจจุบัน การใช้แบบจำลองจราจรช่วยให้สามารถทำความเข้าใจและคาดการณ์สภาพการจราจรได้โดยไม่ต้องทดลองในพื้นที่จริง แต่แบบจำลองทั่วไปยังขาดความเฉพาะเจาะจงเมื่อต้องเผชิญสถานการณ์เฉพาะทาง โดยมักใช้พฤติกรรมพื้นฐานเพียงชุดเดียวในการแทนพฤติกรรมผู้ขับขี่ทุกกรณี งานวิจัยนี้มีวัตถุประสงค์เพื่อศึกษาพฤติกรรมการเปลี่ยนช่องจราจรของผู้ขับขี่เมื่อแล่นตามหลังรถที่จอดรับ–ส่งผู้โดยสาร จากนั้นนำพฤติกรรมที่ได้จากภาคสนามไปใช้ในการพัฒนาแบบจำลองสภาพจราจรใน PTV VISSIM และทำการเปรียบเทียบกับพฤติกรรมจริง ข้อมูลภาคสนามถูกเก็บรวบรวมด้วยการบันทึกวิดีโอและประมวลผลด้วย Video Analytics ก่อนนำไปสร้างแบบจำลอง ผลการศึกษาพบว่า แบบจำลองสามารถจำลองพฤติกรรมการเริ่มต้นเข้าสู่การเปลี่ยนช่องจราจรได้ใกล้เคียงกับข้อมูลจริง โดยช่องว่างเชิงเวลา (Lag Gap) ของยานพาหนะที่ขับขี่ตามมามีค่าเฉลี่ย 0.425 วินาทีในภาคสนาม และ 0.375 วินาทีในแบบจำลอง อย่างไรก็ตาม แบบจำลองยังไม่สามารถสะท้อนพฤติกรรมการเปลี่ยนช่องจราจรได้ครบถ้วนทุกด้าน ซึ่งเป็นประเด็นที่ควรได้รับการพัฒนาเพิ่มเติมในงานวิจัยอนาคต

Developing Entrepreneurial Mindsets In Construction Management Through Experiential Projects, Dalya Ismael

Engineering Technology Faculty Publications

Entrepreneurial Minded Learning (EML), a framework supported by the Kern Entrepreneurial Engineering Network (KEEN), promotes critical thinking and innovation by encouraging students to explore real-world problems through the 3Cs: Curiosity, Creating Value, and Connections. In construction management education, the focus often remains on technical skills and project execution, neglecting the development of entrepreneurial skills like adaptability, value creation, and stakeholder engagement, leaving a gap in preparing students for the challenges of the industry. To bridge this gap, micro-moment activities were introduced prior to the main project to prime students for EML-based thinking. These short, focused exercises encouraged students to solve …

Leaning Pine Arboretum Gazebo, Carson C. Henry

Construction Management

The Leaning Pine Arboretum gazebo provides an aesthetic relaxation space for visitors to the arboretum as well as being a functional structure for faculty as a future event space. This gazebo replaces an existing one, revitalizing the space in conjunction with the arboretum’s planned growth over the coming years. There were many challenges throughout the construction process including permitting issues, design complexities, and coordination with architects and engineers. Persevering through these taught a great deal about project management, the construction industry, and the importance of teamwork. The structure is a total rejuvenation of the prior structure; it is now stronger, …

Developing A 4d Logistics Educational Module With Cmbuilder, Misael Gonzalez Ramirez

Construction Management

The increasing adoption of Building Information Modeling (BIM) in the construction industry has led to a need for its increasing integration into construction management education. While existing curriculum covers various BIM applications, there is often a gap in in-depth instruction on BIM-based site logistics planning. This paper details the development of an educational module designed to address this gap, focusing on 4D site logistics and phasing using cmBuilder. The module aims not only to provide students with technical software skills but also to equip them with practical skills in visualizing, planning, and communicating complex construction site logistics. Through a series …

Software Literacy In Construction, Aidan Cazares

Williams Honors College, Honors Research Projects

The construction industry increasingly relies on software like Bluebeam Revu for their quantity takeoff, document management, and collaboration needs. This project will outline pertinent information obtained through their Bluebeam professional training program and reflect it with a detailed estimate of a real life construct project.

Dynamic Modulus Of Sbs-Modified Asphalt Mixtures Added With Ground Tire Rubber Content, Azharul Islam

College of Graduate Studies: Theses & Dissertations

The study investigates the improvement of the dynamic shear modulus in the base and styrene butadiene styrene (SBS) modified asphalt mixture by accumulating varying amounts of ground tire rubber through an Asphalt mixture performance tester (AMPT). This thesis specifically explores how different percentages of ground tire rubber (GTR) influence the mechanical properties and durability of the asphalt mixture articulated with two grades, PG 64-22 and PG 76-22. The experimental framework consisted of preparing asphalt mixtures blended with 10% to 15% of the binder for PG 64-22 and 3% to 8% of GTR for PG 76-22. The laboratory testing involved using …

Comparative Analysis Of Lidar And Close-Range Photogrammetry Techniques For Inspection Of Mse Walls In Two Georgia Bridges, Md. Mehrab Hossain

College of Graduate Studies: Theses & Dissertations

Mechanically Stabilized Earth (MSE) retaining walls are durable, settlement tolerant, easy to install, and present cost-effectiveness, in highway bridges. Nevertheless, the cost of repairing MSE walls is high, and it is crucial to have an accurate, quantitative, and scalable inspection method for early detection of potential problems. This study aims to analyze and evaluate undesired displacements that may affect these walls over time. For this, two remote-sensing technologies are considered: Light Detection and Ranging (LiDAR) and 3D Close Range Photogrammetry (CRP). Their performances are compared against an accurate Robotic Total Station (RTS) device, serving as the benchmarking instrument. This work …

Evaluating The Effectiveness Of Stay-In-Place Forms To Improve The Tosional Stability Of Box Beam Bridges During Erection, Karl E. Barth, Michael W. Seek, Gregory K. Michaelson, Dimitra Pyrialakou, Brook T. Woldegabriel

Engineering Technology Faculty Publications

Cold-formed tub girders provide an effective steel solution for short-span bridges. The girders are often delivered with an open top with stay-in-place forms installed on site. Walkways may be installed to the side of the girder that can induce significant torsion rotations in the open cross section. Full scale tests on girder specimens have shown that installing one or two panels of stay in place forms at the ends of the girder can significantly reduce the torsion rotation of the girder by providing warping resistance. Cantilever tests on the stay in place forms are performed to investigate the influence of …

Reuse Of Calcium Carbonate (Caco3) Recovered From Discarded Carpets As Filler In Fiber-Reinforced Polymer (Frp) Composites, Roshan Devkota

Graduate Theses, Dissertations, and Problem Reports (ETD)

Over four billion pounds of carpet are discarded annually in the United States, making carpet waste a significant environmental concern. Calcium carbonate (CaCo₃) constitutes up to 45% of the mass of most synthetic carpets. Reusing this CaCo₃ as a filler in the rapidly growing fiber-reinforced polymer (FRP) industry, which is projected to reach USD 10.38 billion, presents a low-cost, practical approach to developing a market-based solution to post-consumer carpet waste.

This study investigates the reuse of CaCo₃ recovered from discarded carpet backing as a filler in FRP composites, focusing on its mechanical viability in comparison to virgin CaCo₃. The methodology …

Leveraging Product And Process Characteristics Across The Concrete Pavement Life Cycle To Integrate Global Warming Potential Into Project Procurement Processes, Michelle Annette Cooper

Dissertations, Master's Theses and Master's Reports

The objective of this research is to support sustainable procurement of concrete pavements by linking materials-level global warming potential (GWP) to the project-level. Infrastructure owners require reliable environmental product declarations (EPDs) and methodologies for integrating GWP into the procurement process to ensure equitable decision-making. This work provides insights into current EPD reliability by assessing the sensitivity of concrete GWP to materials-level contributors to recommend a level of supply chain specificity needed to effectively communicate GWP. A benchmarking methodology was developed and implemented to establish reference values for procuring sustainable products. Having provided evidence towards EPD reliability, this work presents a …

Evaluating The Effectiveness Of Lidar And Photogrammetry For Inspecting Mse Walls In Bridges, Shakil Ahmed

College of Graduate Studies: Theses & Dissertations

Mechanically Stabilized Earth (MSE) retaining walls are vital components of transportation infrastructure, providing structural support for embankments and bridge approaches. As many walls approach or exceed their design life, concerns regarding long-term stability, settlement, and displacement have increased. Traditional visual inspection remains the most common assessment method; however, it is subjective and often unable to detect subtle geometric changes that may precede structural distress or failure. This study evaluates Terrestrial LiDAR (Light Detection and Ranging) Scanning (TLS) and Close-Range Photogrammetry (CRP) as nondestructive, noncontact alternatives for detecting displacement in MSE retaining walls. Three representative sites were investigated: a Control Wall …

Temporal Analysis Of Construction Safety Incidents In Southeastern U.S. Using Machine Learning Techniques, Mayowa O. Oladele

College of Graduate Studies: Theses & Dissertations

Construction safety incidents remain a significant concern, particularly in the Southeastern U.S. due to the high-risk nature of the industry. Analyzing patterns in these incidents can help improve safety practices and reduce accidents. Machine learning (ML) techniques were employed in this study to identify temporal patterns in construction safety incidents, aiming to enhance proactive safety management. The machine learning methods used in this research included logistic regression, decision trees, random forest, support vector machine (SVM), and K nearest neighbors (KNN).

The objective of the study was to analyze temporal trends in safety incidents and identify the most effective machine learningtechnique …

Analyzing Reciprocating Piston Expander Performance In Small-Scale Caes Considering Expansion Mismatch And Residual Mass Losses, Mehrdad Poursadegh

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Energy storage (ES) has become an essential element of modern energy systems, particularly with the rapid growth of renewable energy sources. While these sources are central to global decarbonization efforts, their intermittent nature creates significant challenges for both grid operators and end users. To address these challenges, a wide range of storage technologies have been developed ranging from large utility-scale to small behind-the-meter units. Among these, Compressed Air Energy Storage (CAES) stands out for its long lifespan, low storage cost per unit of energy, and ability to provide both electricity and thermal energy. However, small- and micro-scale CAES systems, unlike …

A Comprehensive Guide To Construction Documentation: From Hand Drafting To Bim, Cesar Salazar

Open Educational Resources

The construction industry relies heavily on precise and clear documentation to ensure the successful completion of projects. This book is a comprehensive guide to creating construction drawings, focusing on the principles and best practices that lead to high-quality outputs. Unlike manuals that teach specific software tools, this book emphasizes the effective use of various drawing tools to produce detailed graphic narratives that support the entire construction process, from inception to completion.

A Comparative Study Between Soft Structures And Hard Structures For The Protection Of Egypt’S Coastlines Against Climate Change, Donia Eldwib

Theses and Dissertations

Coastal communities worldwide face unprecedented threats from climate change, with rising sea levels, increased storm intensities, and accelerated coastal erosion posing significant risks. Egypt, with over 3,000 kilometers of coastlines along the Mediterranean and Red Seas, it is particularly vulnerable due to its densely populated and economically critical low-elevated coastal zones. With the Mediterranean Sea, and the Nile Delta specifically under huge threats, this study examines the different coastal protection strategies used to address these climate change impacts. Different coastal protection structures have been used throughout the years starting with the well-known hard structures moving on to greener alternatives such …

Citizen And Technology: The Core In Developing Human-Centric Smart Cities, Mohammed Ali Berawi, Mustika Sari, Perdana Miraj

CSID Journal of Infrastructure Development

As urbanization continues to grow, the development of smart cities has become a pivotal strategy for addressing the complex challenges of modern urban living. These cities harness advanced technologies like the artificial intelligence (AI), Internet of Things (IoT), and Digital Twin to optimize city operations, improve sustainability, and enhance the quality of life for their residents. However, the success of smart cities should not be measured by the sheer quantity of hardware and software implemented but rather by the quality of life they create for the people who live and work within them. In other words, smart cities must prioritize …

Assessment Of Parking Facilities In Public Areas: The Case Of Keffi Town, Ayodeji Solomon Olatunji, Enogela Ahmed John, Adeyemi Adewumi Adedeji, Muhammed Loko Mikaila

CSID Journal of Infrastructure Development

The absence of adequate parking facilities in residential and public areas remains a significant issue in developing countries, often disrupting economic activities and environmental quality. In Keffi town, the increasing demand for parking exceeds the available supply, leading to congestion and inefficiency. This study evaluates the current public parking facilities, focusing on provision levels, infrastructure conditions, and management frameworks. Primary data were gathered using structured questionnaires and direct observations, with 328 valid responses analyzed through descriptive statistics. Results indicate that prolonged vehicle stays exacerbate congestion, such as at Nasarawa State University (32.8%) and Federal Medical Centre (29.1%). Parallel parking dominates …

Analytical Study On The Intensity Of Surface Urban Heat Island (Suhi) In Kaduna State, Paul Onibaba, Kolade Victor Otokiti, Oluwabukola Grace Ademola, Temitope Mercy Akanle

CSID Journal of Infrastructure Development

Urbanization and climate change are significant drivers of rising Land Surface Temperature (LST) and the formation of Urban Heat Islands (UHIs), which have emerged as pressing environmental challenges in recent decades. This study examines the relationship between Land Use/Cover (LU/C) indices and LST in Kaduna, Nigeria, using multi-temporal Landsat imagery spanning five periods from 2001 to 2021. LST values were derived from the Landsat thermal bands, while LU/C dynamics were identified using the Maximum Likelihood Classifier algorithm. LU/C indices—including the Normalized Difference Vegetation Index (NDVI), Normalized Difference Built-up Index (NDBI), Modified Normalized Difference Water Index (MNDWI), and Soil-Adjusted Vegetation Index …

Assessment Of Project Risk Performance Of Selected Mass Housing Infrastructures In Northern Nigeria, Chinedu Chimdi Adindu, Abdulhaqq Onoruoyiza Muhammed, Emmanuel Ashem Egila, Musa Mohammed

CSID Journal of Infrastructure Development

Mass housing projects in Northern Nigeria often suffer from insufficient risk management, impacting timely delivery, budget adherence, and quality standards. This study assesses risk vulnerabilities in selected mass housing infrastructure projects, focusing on information risks related to roles, responsibilities, scope, requirements, and operations. A mixed-methods approach was employed, with data collected from 465 construction professionals across 20 states, with a 64.58% response rate. Analytical tools, including regression and Pearson correlation, identified critical risks such as underfunding, weak project monitoring and control, and the failure to deliver end-user value. Findings reveal that these risks significantly undermine project outcomes, highlighting the need …

Strategic Knowledge Management Framework For Technology Transfer In Indonesian Joint Operation Construction Projects, Yudha Trimuliadi Suryana, Ayomi Dita Rarasati

CSID Journal of Infrastructure Development

Joint Operation (JO) construction companies in Indonesia face persistent challenges in technology transfer, including misalignment between advanced technologies and organizational capacities. Knowledge management has been proposed as a strategic solution, but its implementation remains underdeveloped. This study develops a framework to enhance technology transfer in JO construction projects through improved knowledge management practices. Utilizing a mixed-methods approach, the research combines a literature review with an analytical hierarchy process, fuzzy set theory, and a simple additive weighting method, supported by data from selected respondents involved in the Jakarta Mass Rapid Transit (MRT) project (CP201). Key findings identify knowledge acquisition, utilization, and …

Impact Of Logistics Factors On Procurement Of Construction Materials In Lokoja, Kogi State, Muhammed Etudaiye Ohida, Isa Imam, Araoye Olarinkoye Ajiboye

CSID Journal of Infrastructure Development

This study investigates the influence of logistics factors on the procurement of construction materials in Lokoja, Kogi State, aiming to identify and rank the critical elements affecting material procurement in building projects. A total of 250 questionnaires were distributed across nineteen neighborhoods in Lokoja using a random sampling technique. Data were analyzed using descriptive statistics, while the T-test assessed the significance of identified logistics factors. The findings revealed that seventeen logistics factors influence material procurement, with seven factors emerging as the most significant: on-time delivery, transportation challenges, material misdelivery, delivery inaccuracies, order processing, storage capacity limitations, and ineffective information flow. …

Overview Of Nigeria’S Infrastructural Development, Muhammad Onoruiza Audu, Otu Muhammed Adeiza

CSID Journal of Infrastructure Development

This paper offers a comprehensive analysis of Nigeria’s infrastructural development from 2014 to 2023, focusing on significant achievements and recurring challenges. The study examines key projects in transportation, energy, and housing, such as the Abuja-Kaduna and Lagos-Ibadan railways, the Azura-Edo Power Plant, and urban road upgrades. Persistent issues, including insufficient funding, regulatory inefficiencies, regional disparities, and security challenges, are also assessed. Using a mixed-methods approach that incorporates a literature review, data analysis, and stakeholder perspectives, the research evaluates the social and economic effects of these initiatives. The findings provide strategic recommendations to improve infrastructure quality and accessibility, promote sustainable practices, …

Enhancing Concrete Sustainability With Self-Healing Technologies, Al Shimaa Abdullatif

Theses and Dissertations

Thanks to its strength, durability and affordability, Portland cement concrete is the most commonly used building material worldwide. However, concrete cracking is inevitable due to numerous factors including shrinkage, exposure to external chemicals, internals reactions, excessive loads, to name but a few. Self-healing is a promising technique that can enable concrete to autogenously heal cracks and alleviate much of the damage. Such healing can without a doubt extend the service life with less need for external repair works therefore it contributes to sustainability. Over the years, several means of self-healing agents have been explored including bio-based procedures and the incorporation …