Engineering Commons^™

Bs News November/December

Building Services Engineering

No abstract provided.

Analysis Of Construction-Related Research Compared To Needs Of Industry Professionals, Sterling Graham

Theses and Dissertations

Research plays a large role in the advancement of any industry. It is particularly important that relevant research is performed in an industry as large and critical as the construction industry. A review of literature shows that historically research has not played a major role in the advancement of the construction industry. The work of this thesis was to explore whether there has been a change in this relationship, or not. This thesis explored whether the construction-related research being done is in alignment with the needs of industry. Comparisons of the rankings of construction research and industry views were done …

Bs News September/October

Building Services Engineering

No abstract provided.

Intricacies Of Professional Certifications For Quality Management (Qm), Edmund R. Martelli

Masters Theses & Specialist Projects

The modern manufacturing marketplace is extremely complex and constantly changing. Career professionals often seek job placement, career advancement, and continuing education through professional certifications. Professional certifications in the United States (U.S.) have been evolving since 1911. In the 1950s, engineering groups established professional certifications and licenses. In the 1980s, administration of accreditation of certification programs proliferated, and by the 1990s, many government and professional organizations sought to standardize procedures for the industry. Currently, professional certifications are available for virtually every profession and issued by multitudes of organizations.

Quality management (QM) encompasses an extensive combination ofprofessional abilities. Providers of professional certifications …

An Experimental Investigation Of Friction Bit Joining In Az31 Magnesium And Advanced High-Strength Automotive Sheet Steel, Rebecca Gardner

Theses and Dissertations

Friction Bit Joining (FBJ) is a recently developed spot joining technology capable of joining dissimilar metals. A consumable bit cuts through the upper layer of metal to be joined, then friction welds to the lower layer. The bit then snaps off, leaving a flange. This research focuses on FBJ using DP980 or DP590 steel as the lower layer, AZ31 magnesium alloy as the top layer, and 4140 or 4130 steel as the bit material. In order to determine optimal settings for the magnesium/steel joints, experimentation was performed using a purpose-built computer controlled welding machine, varying factors such as rotational speeds, …

Improving Surveying Accuracy And Efficiency In Connecticut: An Accuracy Assessment Of Geoid03 And Geoid09, Thomas H. Meyer, Robert Baron

Department of Natural Resources and the Environment Articles

Comparing published NAVD 88 Helmert orthometric heights of First-Order bench marks against GPS-determined orthometric heights showed that GEOID03 and GEOID09 perform at their reported accuracy in Connecticut. GPS-determined orthometric heights were determined by subtracting geoid undulations from ellipsoid heights obtained from a network least-squares adjustment of GPS occupations in 2007 and 2008. A total of 73 markers were occupied in these stability classes: 25 class A, 11 class B, 12 class C, 2 class D bench marks, and 23 temporary marks with transferred elevations. Adjusted ellipsoid heights were compared against OPUS as a check. We found that: the GPS-determined orthometric …

A Life Cycle Cost Analysis Of Large-Scale Thermal Energy Storage Technologies For Buildings Using Combined Heat And Power, Kenneth Gaine, Aidan Duffy

Conference Papers

Buildings account for approximately 40% of energy consumption and greenhouse gas (GHG) emissions in developed economies, of which approximately 55% of building energy is used for heating and cooling. The reduction of building-related GHG emissions is a high international policy priority. For this reason and because there are many technical solutions for this, these polices should involve significant improvements in the uptake of small-scale energy efficient (EE) systems. However the widespread deployment of many technologies, must overcome a number of barriers, one of which is a temporal (diurnal or seasonal) mismatch between supply and demand. Costeffective thermal storage solutions have …

Bs News July/August

Building Services Engineering

No abstract provided.

Best Practices For Dealing With Price Volatility In Utah's Residential Construction Market, James Packer Smith

Theses and Dissertations

Price volatility is a consistent problem that affects all of the parties involved in the residential construction industry. The myriad factors that can have an impact on construction costs are such that it is extremely hard to anticipate upcoming changes in a timely and accurate way. When prices fluctuate during the course of a project, estimates become erroneous and completion of projects within expected budgets becomes difficult. Increasing prices typically leave contractors with the majority of the risk burden due to the enforceability of contracts that are likely to have been executed months prior. The risk associated with the owner's …

Best Practices For Dealing With Price Volatility In Utah Commercial Construction, Justin Earl Weidman

Theses and Dissertations

In the commercial construction industry, the problem of price volatility as it pertains to materials and labor is a consistent problem. The changing instability of market conditions presents a challenge for construction companies to accurately estimate and complete projects within budget. This volatility can lead to higher costs and more risk to suppliers, contractors, and owners which can cause financial distress for all parties involved in the construction process. As lump sum contracts are typically being used on many projects, the owners seem to have the upper hand and are forcing contractors to honor lump sum contracts even when prices …

Natural Fibers And Fiberglass: A Technical And Economic Comparison, Justin Andrew Zsiros

Theses and Dissertations

Natural fibers have received attention in recent years because of their minimal environmental impact, reasonably good properties, and low cost. There is a wide variety of natural fibers suitable for composite applications, the most common of which is flax. Flax has advantages in tensile strength, light weight, and low cost over other natural fibers. As with other natural and synthetic fibers, flax is used to reinforce both thermoset and thermoplastic matrices. When flax is used in thermoplastic matrices, polypropylene and polyethylene are the main resins used. Although at first glance flax may seem to be a cheaper alternative to fiberglass, …

The Relevance Of Teaching Traditional Measurement Techniques To Undergraduate Quantity Surveying Students., Fiacra P. Mcdonnell

Articles

Measurement of quantities is a core skill which must be inherent in all graduates from Quantity Surveying courses. Many students find this subject difficult to grasp, and the learning experience can be problematic especially in the first semester of first year. This is not unique to measurement as in many cases first year students are in the process of adapting to a new stage in their life, along with attempting to master many new subjects (Cottrell, 2008). This is reinforced by Johnston (2010) who highlights the many challenges being experienced by first year students and observes that “ entering first …

Table 6.04, Mark E. Shaurette

Supplementary Content for <em>Demolition: Practices, Technology, and Management</em> <br>(ISBN 978-1-55753-567-2)

No abstract provided.

Table 6.03, Mark E. Shaurette

Supplementary Content for <em>Demolition: Practices, Technology, and Management</em> <br>(ISBN 978-1-55753-567-2)

No abstract provided.

Affordable Lightweight High Performance Concrete (Alwhpc): Expanding The Envelope Of Concrete Mix Design, Kevin J. Simons

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

One way to reduce excess material would be to lighten the load on a structure with the use of affordable lightweight high performance concrete (ALWHPC). Most or all lightweight high performance concrete mixes used today include lightweight aggregates as the coarse aggregate and sand for the fine aggregate. ALWHPC mix designs contain all lightweight aggregates and cementitious materials that are readily available throughout the United States. Instead of 115 – 120 pcf, ALWHPC mix designs range from 88 – 100 pcf and strengths from 2,700 – 8,700 psi compressive strength. This research will explore the use of local lightweight aggregates …

Bs News May/June

Building Services Engineering

No abstract provided.

Performance Of Nevada’S Aggregates In Alkali-Aggregate Reactivity Of Portland Cement Concrete, Mohammad Shahidul Islam

UNLV Theses, Dissertations, Professional Papers, and Capstones

Alkali-aggregate reaction (AAR) is a form of distress that occurs in concrete and results in serviceability problems, cracks, spalling, and other deterioration mechanisms. There are two categories of AAR, namely, alkali-silica reaction (ASR) and alkali-carbonate reaction (ACR). Alkali-silica reaction is one of the most recognized deleterious phenomena in concrete, and has been a major concern since its discovery in the 1940s. The reaction which occurs between reactive silica or silicates present in some aggregates and alkalis of Portland cement produces an alkali-silica gel that expands in the presence of moisture resulting in concrete cracks. ACR is also a chemical reaction …

An Exploratory Study On Energy Consumption Of Energy Star And Non-Energy Star Homes, Prajakta Kulkarni

UNLV Theses, Dissertations, Professional Papers, and Capstones

The reduction of energy consumption is one of the economic necessities in the United States due to depleting energy sources in the world. The construction industry is stepping forward to reduce the energy consumption of buildings by efficient designs or by constructing buildings with energy efficient materials and features. In 1992, the U.S. Environmental Protection Agency (EPA) and Department of Energy (DOE) introduced the Energy Star Program to promote energy efficient products with the same or improved services. According to the EPA, Energy Star homes, which use these products, will consume 20 to 30 percent less energy than non-Energy Star …

Site Design Of A Four-Story 11,705 Sq-Ft Class A Office Building, Britney Richmond, Allison Porrett, Kimberly Warners

Honors Theses

This senior capstone design project was a two-semester long venture that began last fall with the formation of the team, the selection of the sponsored project, and the conclusion of a proposal. The purpose of the proposal was for the senior design team to display a thorough understanding of the project's scope of work and to declare the deliverables agreed upon by the team. The team began contact with the sponsor, Hurley &Stewart, prior to beginning the proposal writing in order to gain more details about the project at hand and to ask any questions. The team chose to add …

Input-Output Analysis Of Irish Construction Sector Greenhouse Gas Emissions, Adolf Acquaye, Aidan Duffy

Articles

Ireland is committed to limiting its greenhouse gas (GHG) emissions to 113% of 1990 levels over the period 2008-12 and to 84% of 2005 levels by 2020 under the Kyoto Agreement and the EU’s ’20 20’ by 2020 respectively. National policies have targeted many industry sectors but have failed to directly tackle GHG emissions associated with construction activity. This paper estimates energy and GHG emissions intensities of the Irish construction sector and subsectors and estimates its contribution to Irish national emissions. This information is used to identify and assess the impacts of policy measures which would result in a reduction …

Processing A Nickel Nanostrand And Nickel Coated Carbon Fiber Filled Conductive Polyethylene By Injection Molding, David Anthony Whitworth

Theses and Dissertations

A new method for pre-impregnating nickel coated carbon fiber with a thermoplastic polymer to make towpreg, similar to a recently developed coating-line by João P. Nunes et al and a new electrically conductive thermoplastic are developed. A melted bath was used to help mitigate health concerns and waste for dispersion of nickel coated carbon fibers (NCF) in low density polyethylene (LDPE). This towpreg was then mixed with more LDPE or a mixture of LDPE and nickel nanostrands (NiNS) to a desired filler volume fraction to test the electrical conductivity of the composite. Some of these mixtures were then injection molded …

Investigation Of Rf Curing Parameters In Resin Infusion Molding, Christopher K. Love

Theses and Dissertations

The purpose of this study is to investigate RF or Radio Frequency energy as a viable alternative to traditional heating methods for the purpose of curing resins used in resin infusion molding, a molding system for polymeric composites. Traditional heating/curing methods include technologies such as room temperature, oven, microwave, infrared, and ultraviolet. Although RF curing provides far more advantages than disadvantages, its implementation into a manufacturing process can be challenging. Specifically, three critical elements must be present in order for RF to function in a manner that is profitable to the manufacturer. Those elements are: (1) the proper generator (voltage …

Development Of Measures To Assess Product Modularity And Reconfigurability, Amie C. Stryker

Theses and Dissertations

Several fundamental benefits of modularity are agreed upon by industry including reusability, flexibility, reconfigurability and extensibility. Interfaces within or between modules which establish provide/depend relationships are the focus of current modularity measures. This research outlines a new method and measures for assessing product modularity in terms of degree of coupling and the recognized modularity benefits. A five–step analysis process is developed and used to guide the modularity assessment. Defining and decomposing products are performed first. Using the resultant functional model from the first step, the identified functions are mapped to modules in a product in the second step. In the …

Cca: Exploratory Case Study Of Construction In A Contingency Environment, Michael J. Pluger

Theses and Dissertations

Top military leadership has identified problems with the timeliness and effectiveness of DoD contingency construction support. Qualitative data was collected in order to gain clarity on the problem space and lay a foundation for solution generation and selection. Interviews were conducted with agents with experience within the Iraq and Afghanistan theater of operation as well as support functions for the Pentagon. Commanders, Engineers, Lawyers, Acquisition Attorneys, Staff Officers and Program Managers have been interviewed. The interviews have been analyzed using open coding to answer research question and identify to emergent themes and concepts. The data collected has revealed that Contingency …

Manpower Cost Analysis Of A Distributed En Route Support Structure Versus A Consolidated En Route Support Structure, Phillip M. Rehmert

Theses and Dissertations

The United States military has developed an en route support structure for airlift requirements to deploy and sustain combat forces in conflict. The Air Mobility Command (AMC) is interested in determining the cost effectiveness of two distinctly different en route structures, in particular, the cost effectiveness of one large facility versus supporting combat forces with many smaller facilities. With the current operational tempo, continued analysis must be accomplished to determine if a smaller footprint is possible in the deployment and sustainment scenarios of conflicts seen today; conflicts more centered on a leaner and faster deployment force. This research examines the …

Influence Of Material Type, Aggregate Size, And Unconfined Compressive Strength On Water Jetting Of Cidh Pile Anomalies, Joseph Carl Heavin

Master's Theses

Water jetting as a means for removing anomalous materials from cast-in-drilled-hole (CIDH) piles was examined. The primary objective of this research was to establish empirical relationships between different jetting parameters and the removal of commonly occurring anomalous zone materials, including low-strength concrete, slurry mixed concrete, grout, and clay soil. Also investigated was the current standard-of-practice used by water jetting contractors within California. The testing specimens consisted of typical anomalous material with unconfined compressive strengths between 5 and 6,000 psi. The experimental work consisted of water blasting submerged specimens using rotary jets, nozzles, and pumping equipment typically used in construction practice. …

Bs News March/April

Building Services Engineering

No abstract provided.

Performance Of A Stormwater Filter And Bacteria Inactivation Using Biocidal Media, Alexander Scott Bowerman

Master's Theses

There are many possible ways to mitigate stormwater pollution, but this study focused on the DrainPacTM catchment basin insert and the feasibility of integrating N-halamine biocidal brominated beads into the filter system. This study was divided into three sections. The first section involved testing a DrainPacTM filter for treatable flow rates, head loss, and removal of solids, oil, and bacteria. The DrainPacTM filter is designed to be installed in a stormwater catch basin. The filter is composed of a 12 x 41 inch metal frame with textile filter media attached to it in a basket shape. The upper portion of …

Cloud Computing And Its Application In The Irish Construction Industry, Alan V. Hore, Roger West, Alan Redmond

Conference papers

The significance of Irish Small to Medium Size Enterprises (SMEs) being more effective and efficient with eBusiness solutions in the construction industry has never been more evident than in today’s global economy. Through the development of a strong and proactive network the Construction IT Alliance (CITA) hope to create a platform for implementing the use of eBusiness in the SME community. This network will provide SME companies with a direction on how to improve their efficiency and effectiveness through the use of technology. At present CITA has identified a potential business solution that would make construction software more accessible by …

Comparison Of Indian Ppp Construction Industry And European Ppp Construction Industry: Process, Thresholds And Implementation, Louis Gunnigan, Renuka Rajput

Conference papers

Abstract Since the 1990’s, there has been a rapid rise of Public Private Partnerships (PPPs) across the world. Governments in developing as well as developed countries are increasingly using this procurement method to bridge the much needed infrastructure gap. PPPs are seen as an important tool for producing an accelerated and larger pipeline of infrastructure investments, and catching up with the infrastructure deficit. Arguably, this is why developed and especially developing countries are very keen on PPP models. This paper will compare the PPP procurement process followed in Europe compared to India and presents a thorough review of literature on …