Engineering Commons^™

Opportunity Lost: Mismanagment Of The Closeout Phase Of Construction Projects, Jared Rogers

Purdue Polytechnic Masters Theses

In nearly every construction project, completing the project on time is one of the most critical things for everyone involved. Late project completion causes a wide variety of complications for the entire project team. This paper seeks to identify some of the causes for delay in the last phase of construction projects: the closeout phase.

Original research was conducted to gather input from construction industry professionals about their experiences with the closeout phase of projects. Factors perceived to cause closeout delay were identified, along with perceptions about the closeout performance of survey participant’s firms. The research validated the study’s premise …

Addressing The Need To Reform Construction Public Procurement In Ireland Through The Implementation Of Building Information Modelling, Barry Mcauley, Alan Hore, Roger West, Dermot Kehily

Conference papers

The Irish AEC Sector is facing one of its most uncertain and challenging periods and will see major cuts in all areas of the economy in 2012. Despite this the Irish Government has announced a number of large capital expenditure investments which have resultantly become a lifeline to a struggling construction industry. In order to compete within the public works sector AEC businesses must operate within the Governments Capital Works Management Framework. The objectives of the framework include achieving cost certainty, value for money and more effective delivery and appropriate risk sharing. The framework remains an area of contention and …

Knowledge Development Through Reflective Practice, Dermot Kehily

Conference papers

This paper examines the development of knowledge through reflective practice and more specifically the development of the author’s knowledge as a result of engaging in reflection on an issue in the field of the author’s research interest. The author commences by consulting and analysing existing published research on reflective practice. The paper sets out the theory of reflective practice as documented by eminent authors in the field. The author addresses the concept of action learning and frames this process within Kolb’s (1976) experiential learning model, in an attempt to formulate a framework whereby his own research focus can be developed. …

Bs News November/December

Building Services Engineering

No abstract provided.

Comparison Of Union And Non-Union Bids On Ohio School Facilities Commission Construction Projects, Alan Atalah

Construction Management Faculty Publications

In 1997, the Ohio senate passed Senate Bill 102 which established the Ohio School Facilities Commission as a separate agency to oversee the rebuilding projects of the public schools in Ohio. To lower the construction cost, the bill exempted construction contractors from paying prevailing wages on these projects based on the hypothesis that this exemption would save the Ohio tax payer 10.7%. Many other studies concluded that these savings would range from 1.5 to 26%. The purpose of this research was to investigate this hypothesis through the statistical analysis of 8093 bids received for the schools’ construction from the years …

Framework For Formative Assessment Learning Strategies In Built Environment Higher Education Programmes, Lloyd Scott, Christopher Fortune

Conference papers

Formative assessment has begun to be recognized as a driving force for enhancing student learning. This paper addresses the context of Built Environment (BE) undergraduate programmes and the findings from a research project in the context of the changing Higher Education (HE) environment. The analysis of the literature on formative assessment shows that there is a common concern among the educational researchers about the function and position of assessment in HE today. The overall aim of this research is to contribute to an improvement in the quality of student learning in BE undergraduate education through the development of a theoretical …

An Analysis Of The Impacts Of Temperature Segregation On Hot Mix Asphalt, Thaddaeus A. Bode

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

This research was conducted to produce a more realistic picture of how variables are created and dealt with during hot mix asphalt (HMA) paving construction. Several paving projects across the State of Nebraska have been visited where sensing devices were used to test how the selected variables contribute to temperature differentials. These variables include density, moisture content within the asphalt, material surface temperature, internal temperature, wind speed, haul time, and equipment type. Areas of high temperature differentials are identified using an infrared camera whose usefulness was initially confirmed with a penetrating thermometer. A non-nuclear density device was also used to …

Bs News September/October

Building Services Engineering

No abstract provided.

Leveraging Whole Life Cycle Costs When Utilising Building Information Modelling Technologies, Barry Mcauley, Dermot Kehily, Alan Hore

Conference papers

Building Information Modelling (BIM) is now being increasingly used as a technology tool to assist design professions in conceiving, designing, constructing, and operating the built environment in many countries. The BIM model provides design professions with the framework to perform exercises in design, programming, cost and value management, and concept energy analysis, in order to achieve the most economical and sustainable building solution. The BIM model though sophisticated is not extensively used to provide estimation software with the data requirements for Life Cycle Costing (LCC), such as, escalation of future expenditure and/or present value costs, discount rates, and study periods. …

Network- Level Pavement Performance And Management Study In Connecticut, Ramandeep S. Josen

Master's Theses

This thesis presents the analysis of asphalt pavement cracking data on the network level in Connecticut. Pavement performance indicators including longitudinal and transverse cracking as well as roughness are investigated with respect to numerous distinct factors that can be grouped into three categories, i.e. climatic-, pavement structure-, and traffic-related. High-quality climatic data was obtained from the national weather stations in Connecticut. Maintenance and construction data was used to determine the pavement age and structure amongst several other factors. Traffic data was acquired from the state records and accumulated traffic loading was estimated for all segments based on their age. High …

Investigating The Bond Of Prestressing Strands In Lightweight Self-Consolidating Concrete, Royce Woodrow Floyd

Graduate Theses and Dissertations

Lightweight self-consolidating concrete (LWSCC) is a relatively recent advancement in concrete technology. The reduced dead load from lightweight concrete is beneficial for precast elements and for elements where dead load is a significant portion of the total load, such as prestressed bridge girders. Self-consolidating concrete (SCC) is a specially proportioned concrete mixture that consolidates under its own weight without the need for vibration. The combination of lightweight concrete and self-consolidating behavior provides the benefits of both. Bond of prestressing steel has been a much debated topic since the 1950s. Limited data are available on the transfer and development length of …

L&D Manual Turn Lane Storage Validation/Update, Deogratias Eustace, Sowjanya Ponnada

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Queuing occurs at intersections mostly due to overflow or inadequacy of turn bays. The ODOT L&D Manual Volume 1 has storage requirements for both signalized and unsignalized intersections. Figures 401-9E and 401-10E of the L&D Manual provide the required turn lane storage lengths which should be compared with the real world conditions to check for adequacy of these lengths as a measure of ensuring that accesses to the left turn lanes are not blocked. In addition to the projected turn lane volume, ODOT’s methodology incorporates both deceleration (based on the speed of the roadway) and potential blockage from the adjacent …

Use Of Building Information Modelling In Responding To Low Carbon Construction Innovations: An Irish Perspective., Barry Mcauley, Alan V. Hore, Roger West

Conference papers

At present the Irish construction industry is facing one of its most uncertain and challenging periods and will see major cuts in all areas of the economy in 2012. Despite this, Ireland pushes forward in sustainability initiatives with the Government ruling that environmentally-friendly policies are to get priority in competing for State contracts worth up to €16 billion a year. This and further initiatives are in place, so as to reduce greenhouse gas emissions by up to 20% by the year 2020.By the end of 2018 the public sector must own or rent only buildings with high energy-saving standards and …

Implementing Building Information Modeling In Public Works Projects In Ireland, Barry Mcauley, Alan V. Hore, Roger West

Conference papers

The Irish State in recent years has suffered huge financial losses in the public works sector, which has now pushed the Irish Government to explore new ways of controlling cost. This background lead to the introduction of the Capital Works Management Framework in 2007 which aimed to support the certainty of outcome in terms of cost and quality, as well as improved risk management, through the implementation of fixed price contracts. In order to successfully compete within this framework it is recommended by the authors, that Irish Government moves towards the legal mandating of BIM. This can ensure a greater …

Efficient Prestressed Concrete–Steel Composite Girder For Medium-Span Bridges, Yaohua Deng

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

In this dissertation, a new Prestressed Concrete-Steel Composite (PCSC) girder system is introduced. The PCSC girder is composed of a lightweight W-shape steel section with shear studs on its top and bottom flanges to achieve composite action with the pretensioned concrete bottom flange and the cast-in-place concrete deck. The PCSC girder is lightweight, economical, durable and easy to fabricate. To prove its feasibility and potential, this study is to investigate design and fabrication issues associated with the PCSC girder. A service design procedure is proposed using Age-adjusted Elasticity Modulus Method (AEMM) to evaluate the time-dependent stresses and strains in the …

A Comparative Study Of Strength And Stiffness Of Thin-Walled Specimens Fabricated By Fdm And 3d Printing Technologies, Miranda Rodrigo

Theses and Dissertations

Rapid Prototyped part failure constitutes a major issue for both RP providers and customers. When parts fail the reputation of the vendor is heavily deteriorated, customer dissatisfaction increase and replacement of the broken parts is often necessary to avoid the loss of future business. Product design teams often run into situations where Rapid Prototyped parts are not able to withstand shipping and handling and delivered broken or while demonstrating and examining the parts. When done in the face of customers this builds a perception of poor quality and lack of aptitude on the design group as well as the RP …

Laboratory Performance Of Highway Bridge Girder Anchorages Under Simulated Hurricane-Induced Wave Loading, Jora Lehrman, Christopher Higgins, Daniel Cox

TREC Final Reports

Many bridges along the Gulf Coast of the United States were damaged by recent hurricanes, and many more are susceptible to similar damage. This research examines the structural performance of common connection details used to anchor prestressed concrete girders to the substructure. Full-scale specimens were fabricated and tested under static and dynamic cyclic load histories. Dynamic load histories were developed from previously conducted hydraulic tests of a 1/5 scale model of a highway bridge under hurricane wave loads. The load effects considered included the pseudo-statically applied vertical uplift force, horizontal force, combined horizontal and vertical forces, and dynamically applied combined …

Bs News July/August

Building Services Engineering

No abstract provided.

Implementing Of Building Information Modelling In Public Works Projects In Ireland - Presentation, Barry Mcauley

Conference papers

No abstract provided.

Implementation, Design, And Cost Analysis Of A Concrete Washout System, Omar Adina

BioResource and Agricultural Engineering

With the increase of environmental pollution in today’s world, many strategies and regulations are being enforced. These enforcements come from the state and federal governments, but public awareness is often overlooked. Stormwater regulations here in California have dramatically changed over the last decade, as the topic is investigated more often.

This senior project encompassed the design prototype and cost analysis of a permanent concrete washout station for the BioResource and Agricultural Engineering Department at California Polytechnic State University, San Luis Obispo. The design parameters given were to construct a steel bin for the excess concrete to be dumped into during …

Slope Stability Monitoring Using Remote Sensing Techniques, Omar Alberto Conte Robles

Graduate Theses and Dissertations

During the past six years the Arkansas State Highway and Transportation Department (AHTD) has spent over nine million dollars repairing slope failures that have occurred in the state of Arkansas. Specifically, higher than average precipitation in 2004 and 2008 led to large quantities of slides, all of which were repaired. Two highways, within the state of Arkansas, with known historical movements along or across the highways are being monitored using traditional surveying techniques and advanced remote sensing techniques. These slides, both of which are located in fill slopes. One a 500-foot long slide located north of Chester, Arkansas, within the …

Curriculum Development For Recession Displaced Workers In Green Construction Industries, John Earl Killingsworth

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

More than 8 million U.S. jobs were lost during ‘The Great Recession’, pushing unemployment from 4.4% in 2007 to 10.2% in 2009. Nearly half of all job losses occurred among lower-skilled workers in construction and manufacturing industries. During this same period, however, jobs in energy efficiency and renewable energy industries grew an unprecedented 9%. As part of a $4.8M grant from the U.S. Department of Labor, the University of Nebraska began development of a workforce transition program to ‘retool’ recession displaced workers for career opportunities in new and emerging green industries. To date, the knowledge, skills, and abilities (KSAs) of …

Efficient Precast/Prestressed Floor System For Building Construction, Eliya E. A. Henin

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Precast floor systems provide a rapidly constructed solution to multi-story buildings that is economical, high quality, fire-resistant, and with excellent deflection and vibration characteristics. Conventional precast concrete floor system cannot compete with cast-in-place post tensioning flat slab floor systems when high span-to-depth ratio and flat soffit are required. This is due to the significant depth of standard precast beams, and use of column corbels and beam ledges. This research presents the development of a new precast concrete floor system that eliminates the limitations of conventional precast floor system and provides a competitive precast alternative to cast-in-place flat slab floor systems. …

Legal Issues In Green Construction, Namrata Shrestha

UNLV Theses, Dissertations, Professional Papers, and Capstones

The most recent "green construction movement", made a significant impact on the design and construction industry in the United States. Organizations such as the American Institute of Architects (AIA) have lobbied governmental entities to provide financial incentives to promote green construction. The green construction community also promotes the notion that a healthier working and living environment is achieved. Due to finical incentives coupled with projected long-term energy cost savings, many owners of new construction are considering green construction as an option. Accompanying the "green construction movement", new kinds of legal issues, particularly relating to green aspects such as certification, energy …

Bs News May/June

Building Services Engineering

No abstract provided.

Framework Development For Construction Safety Visualization, Kishor Shrestha

UNLV Theses, Dissertations, Professional Papers, and Capstones

Throughout the history of the construction industry, many fatalities and injuries have occurred in construction sites. One of the major causes of accidents is unsafe site conditions; basically, this is due to inadequate supervision. To improve upon the traditional supervision approach, this study proposes a `Framework Development for Construction Safety Visualization' approach. In addition to this, a computer vision Edge Detection Algorithm was developed and tested to convert construction site still images into edges of the objects in the images. The framework development of this study uses computer vision, robot vision, image compression, pattern recognition, internet transmission, network communication, and …

Framework Developmant For Construction Safety Visialization, Kishor Shrestha

College of Engineering: Graduate Celebration Programs

Throughout the history of the construction industry, many fatalities and injuries have occurred in construction sites. One of the major causes of accidents is unsafe site conditions: basically, this is due to inadequate supervision. To improve upon the traditional supervision approach, this study proposes a 'Framework Development for Construction Safety Visualization' approach. In addition to this, a computer vision Edge Detection Algorithm was developed and tested to convert construction site still images into edges of the objects in the images. The framework development of this study uses computer vision, robot vision, image compression, pattern recognition, internet transmission, network communication, and …

Smart Home Prototype, Logistics & Planning, David G. Guzman^, Virgilio Gonzalez*

COURI Symposium Abstracts, Spring 2012

No abstract provided.

Asset Management: Roof Maintenance And Facility Energy Retrofits, Joseph P. Dirosario

Theses and Dissertations

The United States Air Force (USAF) needs aggressive new techniques to compliment its asset management of its real estate portfolio. Air Force officials are experiencing budget cuts that have led to degraded facility infrastructure. Two areas of operations in which there are opportunities to improve the asset management of Air Force facilities are roof maintenance and energy retrofits. Information obtained via a geospatial information systems analysis revealed that the current state of the rooftop maintenance program was deficient and supported strategic sourcing as a potential solution to the program's deficiencies. In addition, two methodologies were created to gauge the effectiveness …

Firm Fixed Price And Cost Plus Fixed Fee Construction Contracts In Iraq And Afghanistan, Lindsay M. Jaszkowiak

Theses and Dissertations

Firm Fixed Price (FFP) and Cost Plus Fixed Fee (CPFF) contract types have been utilized the most for construction in the Iraq and Afghanistan theaters. Often construction occurs in contested regions that are known to be particularly challenging, unpredictable, and unstable. The objective of this study was to analyze the performance of these two contract types in the contingency environment, and to determine what internal and external factors influence contact success the most. First, the author evaluated existing construction performance data using bivariate analysis and analysis of variance to identify differences in contract type. Next, a quantitative/qualitative questionnaire was administered …