Engineering Commons^™

Performance Of Drilled Shaft Under Combination Of Complicated Loads Under Hurricane Event, Jie Huang, Sazzad Bin-Shafique

Data

Corresponding data set for Tran-SET Project No. 18GTTSA02. Abstract of the final report is stated below for reference:

"This project includes experimental and numerical studies to investigate and assess the impact of vertical loads on a laterally loaded drilled shaft under various conditions. The experimental study includes lab testing and lab-scale load test to examine a drilled shaft subjected to vertical and lateral loads at a reduced scale. With the data obtained from the lab-scale testing, a numerical model was calibrated, which was used to perform a parametric study to scrutinize the effect of many possible factors such as soil …

Strategies For Prioritizing Needs For Accelerated Construction After Hazard Events, Fernando Moreu, Chao Wang, Xinxing Yuan, Laleh Ghanbari, Claudia Garrido

Data

Corresponding data set for Tran-SET Project No. 18PPLSU04. Abstract of the final report is stated below for reference:

"There is a need for rapid and responsive infrastructure repair and construction after natural disaster events such as hurricanes, wildfires, and tornadoes. These natural disasters often shut down basic infrastructure systems, as experienced recently in several Region 6 states as well as in other states around the country. Accelerated construction practices are often used in these situations to speed up the traditional, and often slow, project delivery process. However, after a natural disaster, several and different types of transportation infrastructure components are …

Bs News September/October

Building Services Engineering

No abstract provided.

Mitigating Reflective Cracking Through The Use Of A Ductile Concrete Interlayer, Qian Zhang, Mohammad Khattak, Adway Das

Publications

Reflective cracking is considered one of the most important issues that causes premature deterioration of composite pavements. Many types of mitigation methods have been studied in the past. However, they are either not effective in delaying the reflective cracking, or they only extend the service life by a few years. To address this critical issue and significantly extend the service life of the composite pavement, in this research, a ductile interlayer made of engineered cementitious composites (ECC) was proposed. It was hypothesized that by adding a thin layer of highly ductile ECC material between the existing pavement and overlay, reflective …

Development Of Geopolymer-Based Cement And Soil Stabilizers For Transportation Infrastructure, Miladin Radovic, Anand Puppala

Publications

Geopolymer Cement (GPC) has drawn much attention in the recent years as an alternative to Ordinary Portland Cement (OPC) for soil stabilization, pavements, bridges and other transportation structures due to their good mechanical properties in comparison to OPC. In addition, GPC can be processed at room temperatures from aqueous solutions of waste materials (e.g. fly ash) or abundant natural sources (e.g. clay), thereby significantly reducing CO2 production associated with processing of OPC. As such, GPC proves to be a more sustainable and environmentally friendly alternative than OPC. This research explores methods to develop GPC with desired properties and evaluate their …

Commercial Construction Schedule Collaborators And Current Scheduling Practices, Evan D. Bingham, Jay P. Christofferson, Mark Hutchings

The Professional Constructor

Construction mangers use the project schedule to communicate aspects of construction timing critical to project success. These schedules may be created using the collaboration of multiple project stakeholders or be the creation of a single manager. The tools used to create and communicate the schedule could range from hand drawn to critical path computer software. Because these practices may vary from company to company, commercial construction mangers can benefit from an understanding of common scheduling practices in the industry. This paper is a report of findings for commercial contractors working in the western United States. Construction managers working for 23 …

Attraction And Retention Of Minority Managerial Employees At Electrical Contractors, Ben F. Bigelow, Anthony J. Perrenoud, Anusree Saseendran

The Professional Constructor

Diversity in the managerial workforce in construction is limited, with a shortage of talent in the industry and the demand projected to grow over the next ten years. The challenge of attracting and retaining managerial talent is exacerbated for trade contractors as they have historically promoted management from the trades. This study explored differences, based on ethnicity, when it comes to factors that attract and retain managerial talent in electrical construction. Data was collected through a nationwide survey of management employees of electrical contractors. It was found that while some factors were influential for all ethnic groups, certain factors became …

Building Information Model-Based Quantity Takeoff – Leadership Support And Training, Morgan Tagg, James P. Smith, Jay P. Christofferson, Kevin R. Miller

The Professional Constructor

Building Information Modeling (BIM) plays an important role in the modern construction industry. BIM models are tools that help stakeholders perform a variety of functions including communication, visualization, trade coordination, and clash detection. A less commonly utilized functionality of BIM that shows strong potential to improve efficiencies and reduce error is model-based quantity take off (QTO). The literature identifies eight challenges to implementing BIM QTO. This paper focuses on the leadership and training elements inherent to two of the identified challenges – 1) New skills and training, and 2) reluctance of employees to adopt. Through semi-structured interviews with estimators, preconstruction …

Effects Of Organizational Trust And Project Delivery Variables On Bim User Confidence, Jason D. Lucas, Saw Sri Neeharika Vijayarao

The Professional Constructor

The use of Building Information Models (BIM) for construction planning has increased in all areas except for automated processes such as quantity take-off. Many model users lack confidence that a model, typically created by a third party, has accurate enough information in it to rely on the data for planning the project. This research is looking at how factors of organization trust and variables related to project delivery can raise user confidence in these situations. Factors of organizational trust were identified through a literature review. Two surveys were utilized to identify which factors were significant in raising user confidence. Finally, …

Accuracy Of Drone Based Surveys To Measure Stockpile Volume, Joseph M. Burgett, Scott Shaffer, Eric Stuckey

The Professional Constructor

This paper outlines a two phase experiment evaluating the accuracy of volumetric calculations using a commercially available drone and structure-from-motion (SfM) software. In the first phase, a large cardboard pyramid with a known volume was used to simulate a stockpile. Using georeferenced images collected by a Phantom 4 Pro drone and the SfM software ContextCapture, the computed volumes ranged between 1.5% and 3.3% of the actual volume. In the second phase of the experiment, a photometric survey was created of a large SCDOT borrow pit. The volumetric calculations were computed using conventional survey practices and with drone collected images. There …

Towards A Theoretical Explanation Of How Pavement Condition Index Deteriorates Over Time, Edgar Daniel Rodriguez Velasquez, Carlos M. Chang Albitres, Vladik Kreinovich

Departmental Technical Reports (CS)

To predict how the Pavement Condition Index will change over time, practitioners use a complex empirical formula derived in the 1980s. In this paper, we provide a possible theoretical explanation for this formula, an explanation based on general ideas of invariance. In general, the existence of a theoretical explanation makes a formula more reliable; thus, we hope that our explanation will make predictions of road quality more reliable.

The Development Of Initial Asphalt Mixture Acceptance Criteria Using The Scb Test And The I-Fit Test, Nathan Delman Parnell

Graduate Theses and Dissertations

Cracking has become the primary asphalt pavement distress in Arkansas. Arkansas along with other states have implemented a test to measure rutting resistance. This paper presents research to implement a cracking resistance test to further modify the Superpave volumetric asphalt mixture design method in Arkansas. The Illinois Flexibility Index Test (I-FIT) was the test chosen to analyze for this research. Two aging methods were tested, a short term oven aging (AASHTO R30 ST) and a long term oven aging (NCAT) method. Six asphalt mixtures were selected to be tested. The mixtures testes were recreated from Arkansas Department of Transportation (ARDOT) …

Self-Healing Concrete Using Encapsulated Bacterial Spores In A Simulated Hot Subtropical Climate, Marwa Hassan, Jose Milla, Tyson Rupnow, Ahsennur Soysal

Data

Corresponding data set for Tran-SET Project No. 18CLSU02. Abstract of the final report is stated below for reference:

"Bacterial concrete has become one of the most promising self-healing alternatives due to its capability to seal crack widths through microbial induced calcite precipitation (MICP). In this study, two bacterial strains were embedded at varying dosages (by weight of cement) in concrete. Beam specimens were used to identify the maximum crack-sealing efficiency, while cylinder samples were used to determine their effects on the intrinsic mechanical properties, as well as its stiffness recovery over time after inducing damage. The concrete specimens were cured …

Use Of Bagasse Ash As A Concrete Additive For Road Pavement Application, Gabriel Arce, Marwa Hassan, Maria Gutierrez-Wing, Michele Barbato

Data

Corresponding data set for Tran-SET Project No. 18CLSU03. Abstract of the final report is stated below for reference:

"The objective of this study was to evaluate the use of sugarcane bagasse ash (SCBA) as a partial replacement of cement in concrete for road pavement application. The study explored the pozzolanic activity of SCBA produced from three different processing methodologies (i.e., raw SCBA, controlled SCBA and post-processed SCBA). The experimental results revealed that SCBA produced by the controlled burning of sugarcane bagasse fiber (SBF) at 650°C and grinding (C-650), presented the maximum pozzolanic activity. However, this SCBA production process was deemed …

Uhpc Shear Keys In Concrete Bridge Superstructures, Craig Newtson, Brad Weldon, Elsy Flores, Jordan Varbel, William Toledo

Data

Corresponding data set for Tran-SET Project No. 18CNMS01. Abstract of the final report is stated below for reference:

"This research investigated the use of locally produced ultra-high performance concrete (UHPC) as a grouting material to repair deteriorated shear keys. Shear keys are used in adjacent girder superstructures to produce monolithic behavior and load transfer across the structure. Shear key durability is a concern since shear key degradation can jeopardize the integrity of the structure. Transportation agencies have reported that 75% of distress in adjacent girder bridges is due to cracking and de-bonding along shear keys. Previous research has shown that …

Karst Sinkhole Detecting And Mapping Using Airborne Lidar, Su Zhang, Shirley Baros, Susan Bogus

Data

Corresponding data set for Tran-SET Project No. 18GTUNM01. Abstract of the final report is stated below for reference:

"The focus of this study is to detect sinkhole hazards using airborne light detection and ranging (LiDAR) data. The premise is sinkholes, particularly those close to transportation infrastructure assets, could cause substantial damages to infrastructure assets, and therefore, being able to accurately and rapidly detect them is essential. However, it is expensive, time-consuming, labor-intensive, and unsafe to survey sinkholes using conventional ground observation methods. This research project was focused on developing accurate and rapid airborne LiDAR-based sinkhole detection and mapping methods, and …

Workforce Development Symposiums For Uhpc, Brad Weldon, Craig Newtson, Grace Mcmurry, Leticia Davila

Data

Corresponding data set for Tran-SET Project No. 18TTNMS02. Abstract of the final report is stated below for reference:

"Ultra-high performance concrete (UHPC) is a cementitious material with a dense microstructure that contributes to high compressive strengths as well as enhanced durability properties. UHPC also possesses significant post-cracking strength and ductility due to the addition of fibers. These characteristics produce a material that provides advantages over conventional concrete; however, high costs attributed to materials and production, lack of industry familiarity and knowledge, and the absence of standardized design procedures have impeded its widespread use. To help disseminate knowledge on UHPC, two …

Augmented Reality Enhancing The Inspections Of Transportation Infrastructure: Research, Education, And Industry Implementation, Fernando Moreu, Chris Lippitt, Dilendra Maharjan, Marlon Aguero, Xinxing Yuan

Data

Corresponding data set for Tran-SET Project No. 18STUNM03. Abstract of the final report is stated below for reference:

"Transportation infrastructure needs continuous monitoring that is conducted by field inspectors regularly in the field. Currently, infrastructure inspectors climb, measure, and photograph structures annually to inform repair needs and prioritize decisions. In order to promote and accelerate early learner's expertise in decision-making capabilities during infrastructure inspections, this research project developed various software applications using augmented reality (AR) as an inspection tool for bridges and bridge management, more specifically. By objectively quantifying infrastructure field inspections, inspectors can make more accurate field assessments and …

Disaster Resilient And Self-Assessing Multifunctional Transportation Structures, Ibrahim Karaman, Darren Hartl

Data

Corresponding data set for Tran-SET Project No. 18STTAM02. Abstract of the final report is stated below for reference:

"This research designs and characterizes multifunctional materials, in particular inexpensive shape memory alloys, for transportation structures that possess excellent mechanical properties and self-sensing capabilities for strengthening and health monitoring. The properties are the Fe-SMAs are sensitive to part size in that the grain size of the material, which can be grown to several inches, should exceed the smallest dimension of the part. In the current work, maximum part size of the large dimension Fe-SMA rods were determined through detailed microstructural investigations. Samples …

Decision-Making Tool For Road Preventive Maintenance Using Vehicle Vibration Data, Changbum Ahn, Chao Wang, Jing Du

Data

Corresponding data set for Tran-SET Project No. 18PLSU08. Abstract of the final report is stated below for reference:

"Automated and timely road pavement damage inspection is critical to the preventive maintenance and the long-term sustainability and resilience of roads in Region 6. Current road inspection practices rely heavily on a manual process. Sensor-based methods (e.g., LiDAR scanning) are promising but can be too expensive for a wider adoption. This study employs a crowdsourcing approach of using the vibration patterns of regular vehicles in inferring specific types of road damages. A cloud-based smart phone app and system was developed to collect …

Decision-Making Tool For Road Preventive Maintenance Using Vehicle Vibration Data, Changbum Ahn, Chao Wang, Jing Du

Publications

Automated and timely road pavement damage inspection is critical to the preventive maintenance and the long-term sustainability and resilience of roads in Region 6. Current road inspection practices rely heavily on a manual process. Sensor-based methods (e.g., LiDAR scanning) are promising but can be too expensive for a wider adoption. This study employs a crowdsourcing approach of using the vibration patterns of regular vehicles in inferring specific types of road damages. A cloud-based smart phone app and system was developed to collect real-time vehicle vibrations, location data, and road damage images for training the detection model. However, there is a …

Strategies For Prioritizing Needs For Accelerated Construction After Hazard Events, Fernando Moreu, Chao Wang, Xinxing Yuan, Laleh Ghanbari, Claudia Garrido

Publications

There is a need for rapid and responsive infrastructure repair and construction after natural disaster events such as hurricanes, wildfires, and tornadoes. These natural disasters often shut down basic infrastructure systems, as experienced recently in several Region 6 states as well as in other states around the country. Accelerated construction practices are often used in these situations to speed up the traditional, and often slow, project delivery process. However, after a natural disaster, several and different types of transportation infrastructure components are in need of inspection, rehabilitation or reconstruction, and transportation agencies are challenged with the task of prioritizing these …

Development Of Metals Corrosion Maps Of Arkansas And Maintenance Of Cross-Drains, Zahid Hossain, Ashraf Elsayed, Mdariful Hasan

Publications

Corrosion potential of metallic structures in alluvial soils is governed by chemical and electromagnetic properties of the soils. Geotechnical engineers are generally more concerned about different types of soils and their physical and mechanical properties than the chemical aspects. The main objective of this study is to analyze the geotechnical, electrochemical and electromagnetic properties of soils in Arkansas. Important parameters (e.g., soil resistivity) related to corrosion potential of metal culverts have been predicted through neural network (NN) models. The developed NN models have been trained and verified by using laboratory test results of soil samples collected from Arkansas Department of …

A Comprehensive Framework For Life-Cycle Cost Assessment Of Reinforced Concrete Bridge Decks, Mohamed Soliman, Samir Ahmed, Ligang Shen

Publications

Various environmental and mechanical stressors cause deterioration of concrete bridge decks. Normal wear and tear, freeze and thaw cycles, and chloride penetration due to deicing salts can cause aggressive deterioration that usually require frequent interventions during the life-cycle of the bridge. These interventions include deck maintenance and repairs (e.g., application of sealers or overlay placement) as well as bridge deck replacement. The quantification of the life-cycle cost of bridge decks considering maintenance and repair activities represents a significant challenge facing local and state transportation agencies. The life-cycle maintenance activities not only increase the direct life-cycle cost of the bridge, but …

Assessment Of Project Risks In Fast-Track Construction Projects, Claudia Garrido Martins

Civil Engineering ETDs

Fast-tracking has been extensively used to respond to demands for reduced construction project delivery times. Unique risks arising from the overlapping of activities can threaten the project. A framework is proposed to assess project risks in fast-track construction projects to better understand the intersection of fast-track, risks, and construction. The research used a commercial construction renovation project as a case study, semi-structured interviews, simulation and optimization methods to identify risks of overlapping activities, classify the risks, evaluate the impact of risks and risk mitigation actions, and optimal combinations to minimize the risk impact and mitigation costs. This study resulted in …

Test Setup Design And Cyclic Evaluation Of Rocking Clt Wall And Floor Restoring Force Lateral System, Aaron Davis Smith

Civil and Environmental Engineering Master's Project Reports

The introduction of the demand for mass timber buildings in areas with seismic hazards has called for new lateral systems. Lateral systems in mass timber building typically utilize a rocking shear wall with post-tensioned rods to provide system re-centering. These post-tensioned rods add axial load to the shear wall and potentially endure long term creep affects. Mass Timber buildings consist of cross laminated (clt) shear walls and floor slabs along with glulam beams. The flexural capacity of the CLT floor slabs along with dead load can provide an alternative source for the restoring force. This project developed a test setup …

Bs News July/August

Building Services Engineering

No abstract provided.

Development Of A Framework To Support The Effective Adoption Of Bim In The Public Sector: Lessons For Ireland, Shiyao Kuang, Alan Hore, Barry Mcauley, Roger West

Conference papers

Building Information Modelling (BIM) has been formally adopted by many countries with the promise of creating greater economic, social and sustainability benefits. Several authors and institutions have presented alternative BIM policies and tactics which have been adopted by developed countries. However, there is evidence to indicate that BIM adoption theories are not well established and, in particular, the linkage between BIM public sector adoption strategy outcomes and their contribution to achieving Government policy objectives are underdeveloped. This paper will present the outcome of the first phase of a systematic literature review of published studies (including journal papers and noteworthy international …

A Decision-Making Tool For Incorporating Cradle-To-Gate Sustainability Into Pavement Design, Sujata Subedi

LSU Master's Theses

The need to continually maintain an aged and crumbling national roadway network, together with a growing demand for upgrading has resulted in major environmental and economic impacts around the nation. This has led to an interest in developing a structured framework to quantify the sustainability performance of pavements by balancing economic and environmental performance against engineering criteria. This study developed an Environment Product Declaration (EPD) based, decision-making framework to quantify the sustainability of pavement design alternatives. In this study, the sustainability of pavement is described in tandem with Environmental and Economic performance criteria. First, the Environmental analysis was inclusive of …

Nonlinear Mechanical Properties Of Road Pavements: Geometric Symmetries Explain The Empirical Difference Between Roads Built On Clay Vs. Granular Soils, Afshin Gholamy, Vladik Kreinovich

Departmental Technical Reports (CS)

It is empirically known that roads built on clay soils have different nonlinear mechanical properties than roads built on granular soils (such as gravel or sand). In this paper, we show that this difficult-to-explain empirical fact can be naturally explained if we analyze the corresponding geometric symmetries.