Engineering Commons^™

Performance Evaluation Of Lightweight Normal And Geopolymer Foamed Concrete Using Palm Oil Fuel Ash As Partial Replacement Of Binder, M .E. Alnahhal Ahmed

Student Works (2020-2029)

Carbon dioxide (CO2) emissions from Ordinary Portland Cement (OPC) have a detrimental effect on the environment and this had led many researchers to search for other alternatives in the form of sustainable cementitious materials. The depletion of natural resources and dumping the industrial by-products and waste materials are serious concern to our environment. This research focusses on the performance of using a palm oil industrial by-product, namely, palm oil fuel ash (POFA), as a partial replacement for OPC and fly ash (FA) in lightweight normal foamed concrete and lightweight geopolymer foamed concrete, respectively. Thus, using 10, 20, and 30% POFA …

Reducing Nox Emissions Of Cargo Handling Equipment (Che) With Humid Air Systems, Hamid Rahai, Jeremy Bonifacio

Mineta Transportation Institute

The authors designed and tested a humid air system (HAS) for reducing NOx emissions of an LPG-powered forklift. The HAS uses distilled water and heat from the exhaust to generate steam that is injected into the intake air of the engine to increase humidity and thus achieve NOx reduction. Field tests with HAS have shown 2.2 ppm of NOx reduction with each percent increase in humidity of the intake air. A provisional patent based on the developed system has been filed.

Challenges Of International Development Projects In Yemen: Perspective Of Public Work Project, Mohammed Lashuel Hassan Mohammed

Student Works (2020-2029)

International development projects are public projects that are created to support the economy and people’s life needs, mostly these types of projects target developing countries. These types of projects face challenges more than other projects due to many reasons. Accordingly, this research aims to explore the challenges that face international development projects in Yemen and conducted by the Public Work Project and highlight the most significant issues that face ID project as well to overcome these challenges. This research adopted the qualitative method by conducting ten semi-structured interviews with the PWP team and others stakeholders. The interview technique was selected …

A New Materials And Design Approach For Roads, Bridges, Pavement, And Concrete, Alan Fuchs, Tathagata Acharya, Luis Cabrales, Jesse Bergkamp, Nyakundi Michieka

Mineta Transportation Institute

Increased understanding of demand for transport energy and how to improve road pavement materials would enable decision makers to make environmental, financial, and other positive changes in future planning and design of roads, bridges, and other important transportation structures. This research comprises three studies focused on pavement materials and a fourth study that examines energy demand within the road transportation sector. These studies are as follows:

1. A techno-economic study of ground tire rubber as an asphalt modifier;

2. A computational fluid dynamics analysis comparing the urban heat island effect of two different pavement materials – asphalt and Portland Cement …

Why Are Residential Property Developers In Ireland Not Using Bim?, Bim Tudublin, Simon Burke

Capstone Reports

The aim of this paper is to establish the level of BIM adoption by larger-scale residential property developers in Ireland and investigate the benefits and challenges of implementing BIM for residential housing. While BIM is a relatively new concept in Ireland for housing, developers and investors in larger scale developments are beginning to recognize areas where BIM can add value to their projects. The research also indicates that while there is evidence of successful BIM implementation for housing resulting in savings in cost and time, widespread adoption is hindered by a lack of knowledge and skills, costs of implementation, lack …

Steel Model Approval: Can Bim Provide A Drawing-Free Approval Process?, Bim Tudublin, David Reynolds

Capstone Reports

Despite widespread use of Building Information Modelling (BIM) software used within their industry, the approval of steelwork contractor’s design information is largely based on the approval of 2d-drawings. These workflows can be modernised to take advantage of current technology and provide productivity gains, but barriers to change exist. This research is an attempt to answer the research question of if a model-based approval process, which removes the need for drawings, is achievable. To answer this question, a mixed methodology was used. A literature review was performed to understand how the approval process works, what information is required and what BIM …

A Comparative Study Of Cadworx Plant 2018 And Revit 2020 With Ez-Iso Add-In, For The Production Of Piping Isometrics, Bim Tudublin, Killian Lynch

Capstone Reports

BIM software evaluation and selection is a complex process. In this paper, a comparative study of Revit 2020 with Ez-ISO add-in, and CADWorx Plant 2018, was carried out. The aim of this study was to determine if a MEP contractor could consolidate software usage into one package, thereby reducing costs for pipework modelling and isometric production. A comprehensive evaluation was developed based on a literature review. A multicriteria decision-making method was used in conjunction with the software evaluation to ensure sound choices were made. An online survey of senior BIM professionals was conducted to validate the analysis and findings. The …

A Critical Appraisal Of Findings And Solutions To Overcome Erroneous Bim Model Production And Information Delivery Workflows, Bim Tudublin, Ryan Forde

Capstone Reports

There are many varying definitions of Building Information Modelling, all of which reflect its transformative capabilities and impact on the construction sector. BIM is an emerging technological and procedural shift within the AEC industry (Succar, 2009). BIM is not just a technological change, but also a procedural and workflow change (Charles Eastman, 2018). Despite the growth of BIM adoption and increasing levels of maturity regarding BIM standards, numerous issues still arise at a micro level during project execution. BIM invokes the need for workflows, frameworks and processes that imparts knowledge, heightens trust, increases efficiency and consistency while reducing fragmentation and …

Simulating Der Adoption In Wholesale Power Markets Using Agent Based Computational Economics, Islam H. El-Adaway, Charles Sims, Mohamed Eid, Yinan Liu, Gasser Galal Ali

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

There is a transition from centralized electricity generation to distributed energy resources (DER). An increasing number of customers are adopting distributed solar generation (DSG). However, utilities face the difficulty of predicting electrical demand and therefore dispatching and controlling generation. The goal of this research is to study the evolving dynamic market behavior affected by DER investment decisions. To that end, agent-based modeling (ABM) is used to study the emerging behavior of the market under those conditions. The model is developed from the existing and validated AMES framework, which is used for agent-based computational economics (ACE) simulation of wholesale power markets. …

Civil Engineering Research In Ireland 2020: Conference Proceedings, Kieran Ruane, Vesna Jaksic, Bidisha Ghosh, Magdalena Hajdukiewicz, Ciaran Hanley, Niall Holmes, Jennifer Keenahan, Zili Li, Patrick Mcgetrick, Ted Mckenna, Mary Moloney, Vikram Pakrashi, Niamh Power

Publications

Civil Engineering Research in Ireland 2020: Conference Proceedings.

Building Information Modelling For Building Services Engineering: Benefits, Barriers And Conducive Measures, Wai Yee Betty Chiu, Joseph H.K. Lai

Faculty of Science & Technology (THEi)

Purpose – Mandating the use of building information modelling (BIM) in building projects has sprawled, but the uptake of BIM in building services engineering (BSE) remains sluggish. The purpose of this paper is to explore how to achieve wider adoption of BIM in BSE. Design/methodology/approach – Through an extensive literature review, the benefits of, barriers to and measures conducive to, using BIM for BSE were identified and classified. Built upon the review and a focus group meeting, a questionnaire was devised for an industry-wide survey in Hong Kong and the survey data were processed by statistical analyses. Findings – On …

Analyzing Citation Metrics In Civil Engineering With Focus On Construction Engineering And Management, Islam H. El-Adaway, Gasser G. Ali, Rayan Assaad, Amr Elsayegh, Ibrahim S. Abotaleb

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

There are several metrics used to evaluate academic publications, including number of citations, h-index, and others. While these metrics are directly related to rewards in the academic community, it is debated whether they correctly reflect the true impact of research. As such, there is a need to clearly interpret and understand such metrics. The goal of this paper is to investigate the citation metrics used to assess academic publications in civil engineering (CE) with a considerable focus on construction engineering and management (CEM). The investigation of these two research fields is important since each one of them has its own …

A Review Of The Second Level Construction Studies Syllabus In Ireland: In Response To A Changing Technological Environment Promoting Digital Construction, Bim Tudublin, Nigel Wearen

Capstone Reports

The zeitgeist of Construction Studies ought to adopt digital construction and work practises. However, legacy is slow to change/adapt, and a lack of awareness persists. From the perspective of the continuing legacy (vocational training) of Construction Studies being linked with industry, this research explores how the subject could evolve to deliver new digital skill sets and to meet the demands of the Architecture, Engineering, and Construction (AEC) sector.A pilot study was undertaken with 24 Transition Year students. The method and content of the study was based on an existing model from the Design Engineering Construction in the UK and was …

Sustainable And Resilient Construction: Current Status And Future Challenges, Niamh Murtagh, Lloyd Scott, Jingli Fan

Articles

The construction industry globally is one of the most environmentally damaging of sectors. Additionally, the resources consumed and the operational energy requirements of buildings are ‘locked-in’, potentially for decades. The Intergovernmental Panel on Climate Change has recognised construction as a sector in which significant improvements can, and indeed must, be made. But the industry is often argued to be unique, in its multiplicity of stakeholders, transient organisational structures, avoidance of risk and impact on society. The current Virtual Special Issue (VSI) sought to bring together a collection of papers on progress and potential for improvement in the construction sector, in …

Thermal Analysis And Post Construction Verification, Cormac Flood, Lloyd Scott

Articles

Purpose – The residential sector in Ireland accounted for 25 per cent of energy related CO2 emissions in 2016 through burning fossil fuels, a major contributor to climate change. In support of Ireland’s CO2 reduction targets, the existing housing stock could contribute greatly to the reduction of space-heating energy demand through retrofit. Approximately 50 per cent of Ireland’s 2m dwellings pre-date building regulations and are predominantly of cavity and solid wall construction, the performance of which has not been extensively investigated at present. Although commitment to thermal upgrade/retrofit of existing buildings may increase under future government policies, the poor characterisation …

Design And Analysis Of A Pavement Marker Detection System, Timothy L. Johnson Ii

Theses and Dissertations--Civil Engineering

Personal injuries and property damage due to the failure of snow-plowable pavement markers which detach from pavement surfaces has led to the development of new all-plastic pavement markers which are located entirely below the planar surface of the pavement. The new all-plastic design pushes existing solutions used to avoid striping over highway reflectors into obsolescence since current solutions operate using electromagnets to sense the metal housings of snow-plowable pavement markers. A replacement solution is currently sought by the highway maintenance industry and three different marker detection methods were developed and tested on real-world highways with both new and aging pavement …

Peak Pressures On Low Rise Buildings: Cfd With Les Versus Full Scale And Wind Tunnel Measurements, Aly Mousaad Aly, Hamzeh Gol-Zaroudi

Faculty Publications

This paper focuses on the processes of wind flow in the atmospheric boundary layer, to produce realistic full-scale pressures for the design of low-rise buildings. CFD with LES turbulence closure is implemented on a scale 1:1 prototype building. A proximity study was executed computationally in CFD with LES that suggests new recommendations on the computational domain size, in front of a building model, apart from common RANS-based guidelines (e.g. COST and AIJ). Our findings suggest a location of the test building, different from existing guidelines, and the inflow boundary proximity influences pressure correlation and reproduction of peak loads. The CFD …

A Review On Investigating The Experimental Process For Partial Replacement Of Cement With Sugarcane Bagasse In The Construction Industry, Amany G. Micheal Prof., Rania Rushdy Moussa Ass. Prof., Nadin Magdy Dawoud Eng.

Architectural Engineering

In the last few decades there has been speedily increasing in the agriculture and industrial wastes. This causes many environmental issues and raises the potential to contaminate the natural resources of living such as water, air and soil. Recently, the amount of organic waste produced daily has been rising, while it is poorly managed. It is either burned or disposed improperly, which effect negatively the environment and public health. On the other hand, during the cement production process many wastes, and pollutants are generated which have major negative impacts on the environment. Cement is considered as a substantial constituent of …

การปรับปรุงสะพานทางหลวงจากผลกระทบแผ่นดินไหวด้วยระบบแยกฐานและการเสริมค่าความหน่วงโดยใช้เหล็กเดือย, ยงศักดิ์ จิวะตระกูลธรรม

Chulalongkorn University Theses and Dissertations (Chula ETD)

การออกแบบโครงสร้างสะพานภายใต้แรงแผ่นดินไหวด้วยระบบแยกฐาน สามารถลดผลกระทบที่เกิดจากแรงกระทำได้เป็นอย่างดี แต่ในขณะเดียวกันกลับทำให้โครงสร้างสะพานส่วนบนเกิดการเคลื่อนตัวที่มากขึ้นเป็นผลให้เกิดการชนกันระหว่างชิ้นส่วน และเกิดการวิบัติจากระยะรองรับช่วงสะพานที่ไม่เพียงพอ งานวิจัยนี้มีวัตถุประสงค์ในการศึกษาผลตอบสนองของชิ้นส่วนโครงสร้างสะพานที่ถูกออกแบบด้วยระบบแยกฐานและใช้เหล็กเดือยช่วยในการสลายพลังงานและลดการเคลื่อนที่ของคาน ซึ่งจะทำการวิเคราะห์โครงสร้างด้วยวิธีการไฟไนต์อิลิเมนต์ โดยใช้โปรแกรม SAP2000 การศึกษาเลือกพิจารณาสะพานแบบคานคอนกรีตอัดแรงรูปตัวไอ มีความยาวช่วงเสา 20 เมตร ทั้งหมด 5 ช่วง มีการติดตั้งแผ่นยางรองคานสะพานเป็นอุปกรณ์แยกฐาน นอกจากนี้จะทำการคัดเลือกคลื่นแผ่นดินไหวให้สอดคล้องกับการสั่นไหวของพื้นดินที่เกิดขึ้นใน จังหวัดเชียงใหม่ ประเทศไทย หลังจากทำการสร้างแบบจำลองจะทำการวิเคราะห์โครงสร้างด้วยวิธีการวิเคราะห์การตอบสนองไม่เชิงเส้นแบบประวัติเวลา โดยจะทำการเปรียบเทียบผลการตอบสนองของโครงสร้างสะพานทั้งก่อนและหลังการปรับปรุงโดยใช้เหล็กเดือย ซึ่งจะพิจารณาในกรณีที่เพิ่มความหนาของแผ่นยางรองคานสะพานจากเดิมขนาด 20 เป็น 100 มิลลิเมตร และทำการติดตั้งเหล็กเดือยขนาดเส้นผ่านศูนย์กลาง 25 มิลลิเมตร เป็นอุปกรณ์ยึดรั้ง ผลการศึกษาพบว่าการเลือกปรับปรุงโดยการเลือกใช้เหล็กเดือยจำนวน 2 ชิ้น ติดตั้งในระนาบที่ยึดรั้งบริเวณจุดรองรับของโครงสร้างสะพานส่วนบนกับโครงสร้างสะพานส่วนล่าง ให้ผลการตอบสนองที่เหมาะสมมากกว่ากรณีก่อนการปรับปรุง โดยระยะการเคลื่อนตัวสูงสุดของคานรองรับแผ่นพื้นลดลงจาก 64 เป็น 51 มิลลิเมตร คิดเป็นร้อยละ 20 และยังช่วยลดผลการตอบสนองของโครงสร้างสะพานส่วนล่าง โดยเสาตอม่อเกิดการครากเพียงเล็กน้อย นอกจากนี้แรงเฉือนสูงสุดที่ฐานลดลงร้อยละ 22 เมื่อเทียบกับกรณีก่อนการปรับปรุงโครงสร้างสะพาน

การพัฒนาผนังสลายพลังงานแบบวิสโคอิลาสติก, ฐิติพงศ์ เจริญสุข

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้มีวัตถุประสงค์ในการศึกษาพัฒนาผนังสลายพลังงานแบบวิสโคอิลาสติก (Viscoelastic wall dampers) ด้วยวัสดุ Asphalt (ยางมะตอย) และ Polyisobutene (PIB) แม้ว่าในปัจจุบันมีผู้ผลิตอุปกรณ์สลายพลังงานสำหรับอาคารเพื่อต้านทานแผ่นดินไหวและแรงลมจำหน่าย แต่มีราคาแพงเพราะต้องนำเข้าจากต่างประเทศ ทั้งมีค่าใช้จ่ายในการติดตั้งและบำรุงรักษาที่สูง นอกจากนั้นยังพบว่า ส่วนใหญ่มีรูปแบบที่กระทบต่อความสวยงามด้านสถาปัตยกรรม ในงานวิจัยนี้จึงพิจารณาถึงความเป็นไปได้ในการพัฒนาผนังสลายพลังงานแบบวิสโคอิลาสติกด้วยวัสดุที่มีราคาไม่แพง มีรูปแบบคล้ายผนังอาคารทั่วไปเพื่อไม่กระทบต่อความสวยงามของอาคาร โดยทำการพัฒนาแบบจำลองทางคณิตศาสตร์ของผนังสลายพลังงานจากการทดสอบชิ้นงานตัวอย่างขนาดย่อส่วนในห้องปฏิบัติการ ภายใต้แรงกระทำแบบวัฏจักร (Cyclic testing) ตามมาตรฐาน ASCE 7-16 ผลการทดลองแสดงให้เห็นว่าวัสดุ PIB มีคุณสมบัติในการสลายพลังงานที่ดี และมีเสถียรภาพภายใต้การเปลี่ยนแปลงอุณหภูมิ จึงนำแบบจำลองทางคณิตศาสตร์ของผนังสลายพลังงานชนิด PIB มาประมาณคุณสมบัติของผนังสลายพลังงานขนาดเท่าของจริง เพื่อเปรียบเทียบประสิทธิภาพในการสลายพลังงานกับผลิตภัณฑ์ผนังสลายพลังงานแบบหนืด (Viscous Wall Damper) ของต่างประเทศ ผลการศึกษาพบว่าผนังสลายพลังงานแบบวิสโคอิลาสติคที่พัฒนามีประสิทธิภาพในการสลายพลังงานดีกว่าผนังสลายพลังงานแบบหนืดอย่างมีนัยสำคัญ ทำให้สามารถลดขนาดและจำนวนผนังสลายพลังงานที่ต้องติดตั้งในอาคารได้ จึงเป็นอีกหนึ่งทางเลือกในการออกแบบต้านทานแผ่นดินไหวและแรงลมที่อาจประหยัดและมีประสิทธิภาพกว่าวิธีการปกติที่นิยมเพิ่มขนาดส่วนโครงสร้างให้มีกำลังหรือสติฟเนสมากขึ้น

Lateral-Torsional Buckling Strength Of Two-Span Glass Fiber Reinforced Polymer Beams, Mojtaba B. Sirjani, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

This paper presents the outcome of a study of two-span glass fiber reinforced polymer (GFRP) I-section beams susceptible to lateral-torsional buckling when subjected to gradually increasing concentrated vertical load(s) in the presence of two different types of lateral bracing schemes. It is found that loading one span results in a smaller buckling load as compared with the cases with loading in both spans regardless of the type of bracing scheme used. Also, the study shows that the addition of midspan braces for the GFRP beams results in up to 5.5 times increase in the buckling load capacity.

Seismic Response Mitigation Of Base-Isolated Buildings, Mohammad Hamayoun Stanikzai, Said Elias, Rajesh Rupakhety

Civil & Environmental Engineering Faculty Publications

Earthquake response mitigation of a base-isolated (BI) building equipped with (i) a single tuned mass damper at the top of the building, (ii) multiple tuned mass dampers (MTMDs) at the top of the building, and (iii) MTMDs distributed on different floors of the building (d-MTMDs) is studied. The shear-type buildings are modeled by considering only one lateral degree of freedom (DOF) at the floor level. Numerical approach of Newmark's integration is adopted for solving the coupled, governing differential equations of motion of 5- and 10-story BI buildings with and without TMD schemes. A set of 40 earthquake ground motions, scaled …

Tire-Chip Reinforced Foundation As Liquefaction Countermeasure For Residential Buildings, Hemanta Hazarika, Siavash Manafi Khajeh Pasha, Isao Ishibashi, Norimasa Yoshimoto, Tota Kinoshita, Shigeki Endo, Ashoke Kumar Karmokar, Takuto Hitosugi

Civil & Environmental Engineering Faculty Publications

To prevent vibration-induced and liquefaction-induced damage to residential buildings during earthquakes, a low-cost technique has been developed and described here. It utilizes a mixture of tire chips and gravel as the horizontal reinforcing inclusion under the foundation of residential houses. The horizontal reinforcing inclusion refers to a layer of tire chips and gravel which is placed horizontally beneath the foundation. This mixture of tire chips and gravel provides sufficient bearing capacity to the foundation. In this research, a series of small-scale 1 g model shaking table tests was performed to evaluate the effectiveness of the technique. In addition, cyclic undrained …

Influence Of Bracing On Buckling Strength Of Pultruded Glass Fiber Reinforced Polymer Frames, Mojtaba B. Sirjani, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

A numerical study of the influence of structural bracing on the buckling strength of pultruded Glass Fiber Reinforced Polymer (GFRP) frames is presented. Although the influence of bracing on frames made from other materials such as steel have been studied in the past, this paper investigates the performance of pultruded GFRP portal frames with pinned or fixed column bases. Each frame is constructed with pultruded GFRP I-section members. The influence of I-section column major and minor axis orientation is also investigated. The results demonstrate the practical significance of bracing pultruded GFRP frames. The results show that the buckling loads for …

The Effects Of Covid-19 On Productivity In Project Management: A Case Study, Emily Lynne Gonzalez

Construction Management

The COVID-19 pandemic has affected many aspects of the construction industry and one of the main aspects that has been affected is productivity. Monitoring productivity on a job is important because it allows us to identify areas that take up the most time and thus gives us the opportunity to allocate resources effectively. Due to safety regulations and new protocols being put in place, the productivity levels on every job has changed. Whether its out in the field or in the office, workplace productivity has certainly been affected by COVID-19. This case study focuses on how the pandemic has affected …

Internet Of Things For Sustainable Mining, Abdul Salam

Faculty Publications

The sustainable mining Internet of Things deals with the applications of IoT technology to the coupled needs of sustainable recovery of metals and a healthy environment for a thriving planet. In this chapter, the IoT architecture and technology is presented to support development of a digital mining platform emphasizing the exploration of rock–fluid–environment interactions to develop extraction methods with maximum economic benefit, while maintaining and preserving both water quantity and quality, soil, and, ultimately, human health. New perspectives are provided for IoT applications in developing new mineral resources, improved management of tailings, monitoring and mitigating contamination from mining. Moreover, tools …

Impact Of Increased Precipitation On Midwestern Construction, Monica Feltman

Williams Honors College, Honors Research Projects

This paper presents the current impact of increased precipitation in the Midwest on the construction industry. Mainly, the impact on jobsite safety, increasing insurance rates, and the resulting changes in design codes, or lack thereof. The goal of this independent research is to gather a better understanding of the influence of these changes, because only then can one accurately seek to combat their harmful effects. As a vital element of the global economy, the construction industry must be conscious of their changing relationship with the environment around them. Therefore, understanding the affects of harmful climate change, will increase awareness of …

Bs News January/February

Building Services Engineering

No abstract provided.

Can The Integration Of Bim And Gis Enhance Information Management For Large Scale Linear Infrastructure Projects?, Bim Tudublin, Brendan Kennedy

Capstone Reports

The integration of BIM and GIS is the subject of considerable research, particularly as the two coalesce for the purpose of information management. Large scale infrastructure projects require best practice in terms of how information is managed given the volume of information generated throughout the project lifecycle and the numerous parties requiring access to project content. This paper investigates whether the integration of BIM and GIS can enhance information management on large scale linear infrastructure projects. The research comprised a literature review and interviews with a number of BIM/GIS professionals actively working on linear infrastructure projects across the world. Some …

Evaluation Of An Interview-Based Internship Class In The Construction Management Curriculum: A Case Study Of The University Of Nebraska-Lincoln, Ali Karji, Stuart Bernstein, Mohammadsoroush Tafazzoli, Arash Arash Taghinezhad, Arefeh Mohammadi

Department of Construction Engineering and Management: Faculty Publications

Internships have been shown to be impactful tools to connect students’ learning in academia with real-world industrial needs. To help the students to get more out of their internship experience, some universities provide a summer internship class in which students do class assignments based on their experiences during their internship. There have been numerous studies on the benefits of internships. However, the benefits of a potential internship class for students in construction management (CM) programs at universities have not yet been investigated. This paper demonstrates the structure of an interview-based internship class and investigates its effectiveness. We have focused on …