Engineering Commons^™

San Luis Obispo Botanical Garden Children’S Garden Shed, Javier Santiago

Construction Management

The San Luis Obispo Botanical Garden (SLOBG) is located on the California’s Central Coast. The garden consists of a total of 150 acres within El Chorro Regional National Park. This project arose because of a shortage of storage within the Botanical Garden grounds. This project specifically aimed to improve the children’s garden section’s storage space. Before the project took place, there was no storage space located within the children’s garden. Preconstruction coordination started in the Fall of 2019. Shortly after, design of the storage space began. Before construction of the storage shed could start, the project site was graded to …

Rodeo Arena Observation Deck, Ryan B. Fiorio

Construction Management

This report details the process that brought about a large deck that was built at the Cal Poly Rodeo Arena by two students, Timothy Smith and Ryan Fiorio. The project itself was over a year in the making, starting from an idea of Ben Londo, the Cal Poly rodeo coach, to a lengthy approval process and lots of time to fundraise the required money. The project was completed in June of 2020. This project used TimberTech composite decking per the request of Ben Londo. It was also built extremely rigid with the use of pony walls instead of posts to …

Computational Modeling Of Recycled Aggregate Concrete Systems, Anuruddha Jayasuriya

Dissertations

Using recycled concrete aggregates (RCA) as a substitution in concrete materials is an excellent way to improve the sustainability of concrete production. However, due to a lack of globally accepted technical guidance, and high material variability, the usage of recycled aggregate concrete (RAC) systems is not readily practiced within most structural engineering applications.

To date, the majority of the experimental findings in the literature indicate that RAC is a weaker composite material when compared to a natural aggregate concrete system in terms of mechanical properties such as compressive strength, elastic modulus, tensile strength, flexural strength, fracture energy, and toughness. However, …

Enhancing Facility Management For Existing Facilities With Building Information Modeling, Ryan Loeh

Theses and Dissertations

Building information modeling (BIM) refers to the process of creating a comprehensive three-dimensional (3D) model that allows for a seamless transition from design and construction to operation & maintenance during a building's lifecycle. While a majority of past research for building information modelling was focused on design and construction, research has shifted to operation, maintenance and renovation. This study investigates the feasibility of integrating BIM (Autodesk Revit) and facility management (BUILDER SMS). BUILDER SMS is currently used at the sponsor's facilities to encourage proactive maintenance and provide updated condition assessments. While both datasets have their own benefits, this study investigates …

On The Seismic Performance Of Skewed Special Moment Frame Reduced Beam Section Connections, Damaso Daniel Dominguez

Graduate Theses and Dissertations

Special Moment Frames (SMFs) are frequently used in high seismic areas for architecturally constrained designs, as they provide lateral system stiffness without the use of braces which often obstruct views and architectural features. Reduced beam section (RBS) connections are popular SMF connection details developed following the Northridge earthquake to limit brittle fractures within connection welds. Current American Institute of Steel Construction (ASIC) provisions (i.e. AISC 341-16) provide prequalified SMF RBS connection details (including welding requirements); however, all prequalified details only consider orthogonal connections between the beam and column. This dissertation investigates the effect of adding skew within SMF RBS connections …

Numerically Modeling Steel Continuous Bridges For Early Age Concrete Deck Cracking, Abdul Aziz Nabil Salah

Graduate Theses and Dissertations

Early age bridge deck cracking is a common problem throughout the United States. Early age cracking develops shortly after the deck is poured. It reduces the serviceability and lifespan of bridges. Early age cracking can be typically attributed to either of two factors, 1) construction practices, and 2) shrinkage. The Arkansas Department of Transportation (ARDOT) has experienced early age bridge deck cracking. ARDOT currently specifies a sequence deck pour on most of their bridges; however, contractors prefer continuous deck pours because of ease and construction time. During the period of this TRC1903 research project, ARDOT has only approved a few …

Numerical Simulations Of Spread Foundations Supported On Stone Columns Using The Discrete Element Method, Anibal Enrique Santos Marin

Graduate Theses and Dissertations

The implementation of stone columns as a ground improvement technique has become more popular in geotechnical construction practice as a result of their ability to improve strength, stiffness and permeability characteristics of weak clayey soil deposits. There are several analytical and empirical approaches to estimate the bearing capacity of stone column foundation systems; however, there is notable variation in the performance of these existing methods when compared with full-scale experimental results. For very weak cohesive soils (i.e., undrained shear strength less than 15 kPa), the use of conventional stone columns becomes restricted because of the insufficient confinement that these types …

Best Practices For Asphalt Emulsion Particle Size Analyses Using A Coulter Counter, Logan P. Kiihnl

Graduate Theses and Dissertations

As asphalt pavements develop distresses, pavement preservation, maintenance, and rehabilitation treatments are used to mitigate distresses and extend the life of the pavement. Many of these treatments utilize asphalt emulsion. Previous research has linked particle size to material properties including viscosity and storage stability. General statements have also been made about particle size influencing emulsion performance while other researchers have identified a trend between particle size and prime coat penetration. Even though literature discusses the importance of particle size, there is little guidance on the best practices of asphalt emulsion particle size analyses, specifically with a Coulter counter.

Data collected …

Development Of Multi-Axial Fatigue Retrofits For Lock Gate Components, Logan Verkamp

Graduate Theses and Dissertations

Lock gates are essential infrastructure components to the United State (US) supply chain. They create large cost savings and environmental benefits when compared with traditional methods of transport (freight and rail). Because of the large quantity of goods and dependence on these shipping chains, the US economy can be drastically affected by an unexpected gate closure. Unfortunately, many lock gates within the US have reached or exceeded their designed life. Due to the intensity of cyclic loads and the environment, fatigue cracks have become a prominent issue. Developed cracks near the pintle region (a joint which the gate rotates and …

Economic Analysis Of Productivity In The Irish Construction Sector, Kpmg, Fac, Róisín Murphy Dr, Avril Behan

Reports

Important strides to enhance productivity in the construction sector have been taken by both industry and Government in recent years. However, a collaborative, sectoral wide strategy to drive further increases in productivity is required, with the coordinated participation of all stakeholders across the full life cycle of a project. This report, commissioned by the Department of Public Expenditure and Reform (DPER), produced by KPMG and Future Analytics Consulting Ltd. (FAC) and peer reviewed by TU Dublin, aims to understand and address the reasons for low levels of productivity in the Irish construction sector and identify specific recommendations and actions that …

Evaluation Of The Dynamic Behavior Of Steel Staircases With Concrete Filled Pan Treads, Tyler Sondag

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Vibration serviceability of staircases has been a growing challenge for structural engineers due to changing materials and structural forms. In order to prevent or correct serviceability problems due to structural vibrations, structural engineers should be able to predict the dynamic performance of a staircase structure. However, there are few technical guides available for designing steel staircases, and the ones that do exist are often limited in their applications. Currently, there is a lack of research on staircases that are less prone to vibrations, such as staircases with concrete filled pans that are composed of face and wall stringers. Therefore, the …

Bs News May/June

Building Services Engineering

No abstract provided.

A Method For Uncertainty Managementin Life Cycle Assessment Studies –A Tiered-Hybrid Case Study Of An Irish Construction Project, Deidre Wolff

Doctoral

Life Cycle Assessment (LCA) quantifies the potential environmental impact of a product system throughout its life cycle from raw material extraction, production, manufacture, use and maintenance through to final disposal. The results from LCA studies are often used to support decision-making processes andpolicy development. LCA is conducted in four iterative steps, beingGoal and Scope definition, Life Cycle InventoryAnalysis (LCI), Life Cycle Impact Assessment (LCIA), andInterpretation. The guidelines for each step are provided in the International Organization for Standardization (ISO) standards, ISO 14040:2006 and 14044:2006. Uncertainty arises in all steps of an LCA,yet the propagation and reporting of these uncertainties is …

Quantitative Resistance Assessment Of Sfrp-Strengthened Rc Bridge Columns Subjected To Blast Loads, Ahmad Alsendi, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

The blast resistance of a typical reinforced concrete bridge pier column design was modeled with a nonlinear finite element approach that considers material damage, fracture, and separation. While varying concrete strength, amount of longitudinal reinforcing steel, and gravity load, the effect of applying an externally bonded steel fiber reinforced polymer (SFRP) wrapping was assessed. The presented approach uniquely quantifies column blast resistance in terms of charge weight. It was found that blast capacity was roughly linearly related to concrete strength and steel reinforcement ratio, the former of which is most influential. It was further found that a single layer of …

Studies Of Oval Tube And Fin Heat Exchangers, Phillip Nielsen

Discovery Day - Prescott

Heating Ventilation and air-conditioning (HVAC) is a system which changes the temperature of the surroundings for the purposes of cooling or heating. This system requires energy to maintain a temperature difference from the outside temperature. This is important since minimized power is one of the requirements for the system to achieve a better efficiency. Optimizing the flow over the evaporator coils is one way to increase the cooling efficiency. This will reduce the power required to have a sustainable system. Optimizing the flow to increase the energy transfer between the fins and the incoming air could result in a greater …

Simulating Cement Hydration Using Hydcem, Niall Holmes, Denis Kelliher, Mark Tyrer

Articles

HYDCEM is a new cement hydration model to simulate volumetric changes and predict phase assemblage, degree of hydration, heat release, compressive strength and chemical shrinkage over time for PC and limestone binders undergoing hydration for any w/c ratio and curing temperatures between 5 and 45 °C. While models should never completely remove experimental analysis, they are an aid to better understand cement hydration and microstructure development by allowing users analyse different binders in a relatively short time. HYDCEM, written in MATLAB®, is aimed at complementing more sophisticated thermodynamic models giving users a reasonable prediction of hydration behaviour over time, using …

Seismic Evaluation And Optimization Of Reinforced Concrete Multistory Building, Ahmed Abdallah

Morehead State Theses and Dissertations

A thesis presented to the faculty of the Elmer R. Smith College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Ahmed Abdallah in April of 2020.

Heavy Civil Estimating Module For Cm 314, Everett A. Roberts

Construction Management

In the past, through engagement with students that have gone through the Heavy Civil class, it has been found that student understanding of typical heavy civil operations is subpar. Through an updated course module that focuses on estimating the four major operations, Earthwork, Underground, Asphalt, and Concrete, students will gain a deeper understanding of the heavy civil field of construction. The module consists of four assignments that pertain to the previously mentioned operations. Each contain a lecture detailing typical crew compositions and cycle times, reference material and resources the student can use when completing the assignments. This new module will …

Multi-Level-Phase Deep Learning Using Divide-And-Conquer For Scaffolding Safety, Sayan Sakhakarmi, Jee Woong Park

Civil and Environmental Engineering and Construction Faculty Research

A traditional structural analysis of scaffolding structures requires loading conditions that are only possible during design, but not in operation. Thus, this study proposes a method that can be used during operation to make an automated safety prediction for scaffolds. It implements a divide-and-conquer technique with deep learning. As a test scaffolding, a four-bay, three-story scaffold model was used. Analysis of the model led to 1411 unique safety cases for the model. To apply deep learning, a test simulation generated 1,540,000 datasets for pre-training, and an additional 141,100 datasets for testing purposes. The cases were then sub-divided into 18 categories …

The Professional Constructor, Full Issue, Volume 45, Number 01

The Professional Constructor

No abstract provided.

Analysis Of Military Construction Cost Growth In Usaf Major Defense Acquisition Programs, Emily E. Angell, Edward D. White, Jonathan D. Ritschel, Alfred E. Thal Jr.

Faculty Publications

This study uses descriptive and inferential statistics to identify cost growth Analysis of Military Construction of military construction (MILCON) at the programmatic level, while bridging the gap between Selected Acquisition Report (SAR) estimates and actual project costs. Findings of this study aid the cost community with appropriate allocation of resources in developing these estimates. Overall, Major Defense Acquisition Programs (MDAP) appear to experience more negative growth (cost savings) in MILCON estimates on reviewed SARs— typically less than 0.2% of the total program cost. SAR estimates became more accurate from the first to last SAR in comparison to the total MILCON …

The Viability And Simplicity Of 3d-Printed Construction: A Military Case Study, Jeneé A. Jagoda, Brandy Diggs-Mcgee, Megan Kreiger, Steven J. Schuldt

Faculty Publications

In November 2019, U.S. Marines, Air Force, and Army Corps of Engineers personnel demonstrated the viability and simplicity of three-dimensionally (3D)-printed construction in a controlled environment at the U.S. Army Engineer Research and Development Center—Construction Engineering Research Laboratory in Champaign, Illinois. The tri-service exercise spanned three days and culminated in the construction of three 1 m × 1 m × 1 m (3 ft × 3 ft × 3 ft) concrete dragon’s teeth (square pyramid military fortifications used to defend against tanks and armored vehicles) and several custom-designed objects. The structural components were printed using a custom-built, gantry-style printer called …

Design And Construction Of Drilled Shafts For Landslides, Malek Smadi

Purdue Road School

In general, weathered shale underlain by shale interbedded with limestone is the main forma-tion that underlies many of the slopes adjacent to the Ohio River in southern Indiana. During wet periods the weathered shale exhibits a sig-nificant decrease in strength, which has led to a number of landslides. In this session several case histories will be presented where drilled shafts have been used to repair and improve the safety of homes and roadways.

Plant Growth Layer: Recurring Special Provision 629-R-630, Kurt Pelz, Shawn Slaymon

Purdue Road School

This presentation encapsulates everything from what plant growth layer is and how it was developed to when it should be added to projects, its proper verification, and estimating PGL quantities. This presentation will also include project-specific examples of the limitations and expectations of PGL during the design and construction phase.

The Future State Of Mobility, Jerome Quandt

Purdue Road School

Formed in 2018, the Illinois Autonomous Vehicles Association (ILAVA) is a privately funded non-for-profit organization focused on establishing thought leadership in the state of Illinois, by identifying and addressing the current and emerging opportunities related to the inevitable growth of CAV technologies throughout the transportation network. Through the deployment of scalable and sustainable business solutions, facilitating industry education and establishing thought leadership, ILAVA is creating an ecosystem that defines Illinois as #TheFutureStateofMobility.

Waterproofing Membrane For Concrete Boxes And Culverts, Keith Alan Lytton P.E., Jeremy Hunter P.E.

Purdue Road School

In 2019 a new INDOT Specification went into effect for waterproofing on concrete pipes and three- and four-sided boxes. The new specification decreased the leakage at these structures joints from 95% to less than 5%. This presentation will provide the background on why the change was needed and the solution, complete with construction examples and results.

Dnr Permitting From A Consultant’S Perspective: Construction In A Floodway, Paul Brayton, Nicole Reed

Purdue Road School

When working near a river or stream, it is likely that a Construction in a Floodway (CIF) permit will be required. Consultants submitting permits to regulatory agencies can encounter costly delays trying to get them approved. This presentation will focus on the best practices to help streamline the permitting process by walking through the permitting process from a consultant’s perspective, including what projects need a CIF permit, and when to submit.

Strategies And How-Tos On Interstate Closures For Mot, Jim Poturalski, Eryn Fletcher

Purdue Road School

Full interstate closures have proven to be an effective method for balancing congestion and safety when maintaining interstate infrastructure. This presentation will describe successful practices, federal requirements, and the process to follow when closing an interstate for maintenance.

Unique Utility Coordination, Bill Read, Thomas Randall, Corey Baugh

Purdue Road School

This session presents constructibility problems associated with raising a bridge about 9 feet under a 765 KV line. The solution for how to work under the line while complying with OSHA requirements, utility company coordination requirements, and the overall construction schedule was difficult: shut down the power line for construction, which had to be coordinated within a narrow window and also funded. Join us for a discussion.

Six Pillars Of Utility Engineering, Cesar Quiroga, Natalie Parks

Purdue Road School

The Utility Engineering and Surveying Institute (UESI), the newest Institute within the American Society of Civil Engineers, has adopted and strongly promotes the six pillars of utility engineering. This presentation will discuss how each pillar is critical to successful project delivery and how the six pillars can be incorporated into our projects.