Engineering Commons^™

Arise (Certcoin)- Inspiring Demand For Sustainable Energy Skills, Barry Mcauley, Paul Mccormack, Andrew Hamilton, Eduardo Rebelo

Conference papers

The European AEC Sector now faces impending challenges over the next decade concerning escalating climate targets. To reach these targets, it vital that the green economy deliver a better-skilled workforce and develops new competencies and methods of working. Training in the domain of digital construction technologies and processes, such as Building Information Modelling (BIM), are now seen as essential upskilling vehicles that must be embraced if the sector is to transition towards a greener agenda. To assist in meeting these training needs a selection of partners from the BIM EPA will partake in the Horizon 2020 ARISE project, aiming to …

An Exploration Of Lean And Bim Synergies With A Focus On Smes In Construction, Barry Mcauley, Marina Andreou, Alan V. Hore, Avril Behan

Conference papers

Small and Medium Enterprises (SME) account for 99.7% of the Irish Construction Industry and contribute to 68% of all employment in the sector. These organisations now find themselves facing the challenge of returning to productive business post the Covid 19 shutdown. More than ever, SMEs must modernise and adapt their business models to embrace new ways of working, such as Lean Construction and Building Information Modelling (BIM), in the absence of clear business incentives. It has proved difficult to persuade SMEs to change their ways of working due to limited finances, internal resources and above all, the cultural shift required …

Introduction To Prefabrication And Automation In Construction, Luciana Debs, Jiansong Zhang, Yunfeng Chen

Bowen School of Construction Open Educational Resources

New developments and recent advances in construction methods have the potential to change the future of the architecture, engineering and construction industry. Prefabrication, along with modular construction, provides a safe and controlled environment for the production of building construction elements and raises the need for improved collaboration and coordination from design to manufacturing and from transportation to final assembly. Prefabrication also provides relief from the skilled construction labor shortage while opening up new opportunities for mass customization within the building industry. Prefabrication and modular construction automation are emerging expansion routes for the construction industry. In addition, integral to developing the …

Building Services Engineering September/October 2021

Building Services Engineering

No abstract provided.

Prefabrication In Buildings With Focus On Emerging Mep Rack Systems, Mark Daniels, M.G. Matt Syal

The Professional Constructor

The growth in technology and automation has influenced the construction industry to explore prefabrication alternatives in building design and construction. In addition, the shortage of skilled labor is accelerating the push for the adoption of prefabrication in building industry. This paper provides an overview of the present construction market and labor trends and summarizes various levels and categories of prefabrication. It then provides detailed information on an emerging MEP prefabricated solution known as the MEP rack systems. The implementation of the MEP rack systems is discussed with the help of a hospital case study project. It concludes with the discussion …

Case Study Of Using Unmanned Aircraft Systems To Support Bridge Inspections, Joseph M. Burgett, Gurcan Comert

The Professional Constructor

This paper presents the results of a case study conducted to evaluate the potential benefit of unmanned aircraft systems (UAS), commonly referred to as drones, as a tool to improve the bridge inspection workflow. The study conducted two experiments to determine how well deficiencies could be detected using a UAS. Both experiments were conducted using the same test bridge. The first experiment was carried out by the bridge inspection engineers (BIEs), who had previously inspected the bridge using traditional methods. They used the drone to search for inspection points identified in the inspection report. The second experiment was conducted by …

Stick Built Vs. Panelize Wall/Truss Framing For New Home Construction: A Time Study Labor Comparison., Eric A. Holt, Jim Anzlovar, Alexander Welsh

The Professional Constructor

Due to many trends in the construction industry (material cost increase, labor shortages, supply chain issues, pandemic, market demand outpacing supply), the homebuilding industry is looking for alternative ways to frame homes. In response to the National Housing Endowment (NHE) Request for Proposal, the researchers reviewed the literature on the housing market’s current state regarding the scale and scope of the skilled construction framers shortage and the current market share of single-family framing method; stick-built vs. panelization. Working with industry part ners, the team analyzed time studies for multiple new home builds. It was found that panelized wall framing systems …

Minority And Female Participation In Construction Industry Apprenticeship Programs, Richard Bruce, Aaron Sauer, Patrick Sells, Curtis Bradford

The Professional Constructor

According to the U.S. Bureau of Labor Statistic’s Current Population Survey, nearly 90 percent of the 10.7 million people employed in the construction industry are white males (2021). This statistic will remain unchanged unless more minorities and females are recruited into the industry. For craft workers, a primary recruitment mechanism is the registered apprenticeship program. This study analyzes the U.S. Department of Labor’s Registered Apprenticeship Database (RAPIDs) from 2000 to 2019 to identify trends for new apprentices. The study found that there was no change in the proportion of new female apprentices in the previous 20 years and no change …

Evaluation Of In-Cab Air Quality For Nonroad Diesel Construction Equipment, Phil Lewis, Sherif El Khouly, Adam Mayer, Jeremy Johnson

The Professional Constructor

Previous research indicates that air quality near the cabs of nonroad diesel equipment may exceed recommended exposure limits for certain pollutants. The objective of this case study was to collect and analyze air pollutant data near the cabs of nonroad diesel equipment while performing real world activities. Using state-of-the-art instrumentation, the research team conducted 24 tests on nine different items of nonroad equipment. The team collected data related to pollutant concentrations of carbon monoxide, carbon dioxide, nitric oxide, nitrogen dioxide, particulate matter, and black carbon. Average concentrations of carbon monoxide and nitric oxide did not exceed published exposure limits on …

Assessment Of Key Imperatives For Enhancing Precast Adoptability In Egypt, Mostafa Sameh

Theses and Dissertations

Precast Concrete’s modular application concept is a major construction method that has been used historically seen in various shapes, forms, and with a wide range of constituents. Examples include Ancient Egypt and China among several impressive structures in old civilizations. The major advantages of precast concrete lie in its adaptability, resilience, and versatility which makes precast concrete one of the most agile building materials. Precast concrete as we know it today has been introduced to our markets over the past several decades. Having similar advantages to that of old precast building methods, the road has been paved for wider use …

Digital Construction And Bim Research In Ireland 2016-2020, Barry Mcauley, Roger P. West, Alan V. Hore

Conference papers

As the construction industry opens up post pandemic, new and significant challenges will demand considerable expertise, not least in financial viability, solving the housing crisis and facing the very significant climate change pressures to make the industry less wasteful and less carbon intensive. This presents an excellent opportunity to further inculcate aspects of lean construction, particularly BIM into many aspects of construction not traditionally associated with digital construction, provided the necessary expertise is available and known to exist. Following a well-received recent conference paper summarising BIM-related research published by academics in Ireland’s higher education institutions in 2020, this paper will …

Construction Disputes And Associated Contractual Knowledge Discovery Using Unstructured Text-Heavy Data: Legal Cases In The United Kingdom, Jeehee Lee, Youngjib Ham, June-Seong Yi

Civil and Environmental Engineering and Construction Faculty Research

Construction disputes are one of the main challenges to successful construction projects. Most construction parties experience claims—and even worse, disputes—which are costly and time-consuming to resolve. Lessons learned from past failure cases can help reduce potential future risk factors that likely lead to disputes. In particular, case law, which has been accumulated from the past, is valuable information, providing useful insights to prepare for future disputes. However, few efforts have been made to discover legal knowledge using a large scale of case laws in the construction field. The aim of this paper is to enhance understanding of the multifaceted legal …

An Enhanced Framework To Compute Road User Costs Associated With Construction Zones, Jeremiah Adebiyi

Electronic Theses and Dissertations

The monetary quantification of inconveniences caused to the road users by ongoing construction activities is known as the Road Users Costs (RUCs). While the importance of RUCs is widely known, some highway agencies lack an appropriate methodology to compute RUCs. Thus, there is a need to develop a framework to compute RUCs that can be adopted quickly by highway agencies. This study reviewed existing literature and conducted a nationwide survey to identify and summarize the current practices of computing RUCs. It developed an enhanced framework and tool to compute RUCs that balances the effort required to calculate RUCs and the …

Housing And Urban Development Home Development And The Future Of The Industry: Case Study, Nolan J. Binkele

Construction Management

A HUD home is a 1-4 unit residential property acquired by HUD (Housing and Urban Development) as a result of a foreclosure action. These homes tend to be priced slightly below market value in order to regain past losses. The Department of Housing and Urban Development has developed a building code to classify manufactured homes as HUD. Although manufactured homes are typically sold to single property owners, I hypothesize that building them in a tract form can benefit a community by providing affordable, adequate housing for low income families and single families. I also hypothesize that HUD home development will …

The Preconstruction Work For The Shaded Structure At Growing Grounds, Grace Gv Brekke

Construction Management

When beginning a project, one must take vast consideration into the plan. For a construction project, this means considering how long the project will take, how much it will cost, what materials will be used, who will build it, where the money will come from, and who will utilize the space. This paper analyzes all this preconstruction work for a shaded structure at Growing Grounds. The Growing Grounds shared community space in San Luis Obispo, California, provides incredible resources and opportunities to the people in the area that struggle with mental health. Through horticulture, the volunteers must work hard to …

Reasons And Remedies To The Dying Plant Walls, Hayley Q. Mcgough

Construction Management

Sustainability in construction has been increasingly popular and detrimental with the state of the planet and climate change. One of the more popular solutions is the addition of plant façades to a building, which are plants that are put on the vertical of a building. The benefits that come with plant facades include and are not limited to: Reduction of the urban heat island effect, improved air quality, local job creation, improved energy efficiency, building structure protection, noise reduction, increased biodiversity, urban agriculture. These benefits are not reaching their full potential because these plant façades keep dying creating a bigger …

‘Serene Classroom’ Minimizes Noise For More Conducive Learning, Zaiton Haron, Khairulzan Yahya, Nadirah Darus, Rafidah Mohd Yussup, Abdullah Zawawi Awang, Norelyza Hussien, Ain Naadia Mazlan, Rozana Zakaria, Mohammad Ismail, Noramera Nabila Amir Nizam, Ahmad Syakir Farhan A Kassim, Nur Syalyana Malek, Rifa Rafida Rifki, Helmi Kamaludin, Syamsul Hafiz Yaakob, Zaliza Haron, Sheikh Izat Azhar Sheikh Ahmad

ASEAN Journal of Community Engagement

Noise pollution can be categorized as a danger in silence. In school, noise pollution inhibits the focus of learning, impairs learning and cognitive development, for example, students' skills to think and understand both oral and written comprehension may be hampered by noise. Many schools in Malaysia experience excessive noise pollution as their locations are very near busy roads. This will be one factor that hinders the implementation of the education system in producing holistic students in order to prepare for the 4IR era. Knowing the importance of this problem, a group of researchers from UTM GREENPrompt, School of Civil Engineering, …

Semi Real-Time Detection Of Subsurface Consolidation Defects During Concrete Curing Stage, Chongsheng Cheng, Zhigang Shen

Department of Construction Engineering and Management: Faculty Publications

Subsurface consolidation defect is a common issue in concrete pavement construction, and the hidden defects often require costly repairs after project delivery. Therefore, being able to identify this type of defect during construction will enable contractor to conduct quick repairs to avoid costly post-construction rework. In this paper a semi real-time detection approach using infrared thermography is introduced. The developed approach utilizes the hydration heat during curing time to identify the subsurface voids based on the regional temperature contrast. Experimental studies were conducted using artificial void-defect in different sizes and depths. The thermographic analysis is employed to locate the void-defects …

Integration Management: A Bibliometric Study Of Research Trends, Shabir Hussain Khahro, Ayaz Babar, Fida Hussain Siddiqui, Tauha Hussain Ali, Ali Raza Khoso

Library Philosophy and Practice (e-journal)

Integration management has always been a topic of interest for researchers. It plays a significant role in the success of the projects. Integration management effectively incorporates all the aspects of projects and provides a roadmap towards their success. Based on the significance of the term, this paper assesses the research output of integration management since 1970 in different fields of the application using the Scopus database. The data was collected and analyzed through Microsoft Excel to analyze the research publications trend line, publication types and their access to the audience, organizations and countries involved, languages of publications, authors participating, and …

An Improved Earned Value Management Method Integrating Quality And Safety, Brian Briggs

LSU Doctoral Dissertations

The construction industry invests significant time and money to improve quality and safety while reducing cost and schedule impacts. The industry has a sincere desire to improve construction project management methods to improve efficiency. Historically, quality and safety underperformances result from undermanaged quality control and safety activities. The cost and schedule impacts associated with poor quality work have always had an impact on construction operations. The unprecedented challenges and uncertainties of COVID-19 highlighted the need to improve the Earned Value Management (EVM) method within construction to reflect these quality and safety activities. The central goal of this dissertation is to …

Impact Of Personality Traits And Team Criteria On Construction Team Performance, Arlys Silva Payne

LSU Doctoral Dissertations

This dissertation investigated how personality traits and team criteria influence team performance in real construction projects. Though personality influence on team performance has been significantly investigated in other business sectors, the literature revealed that the construction industry lacks investigations regarding personality influencing team performance. The existing literature revealed that the Big Five Factors (BFF) was the most popular assessment tool for personality. Thus, this dissertation adopted the 50-Item Personality questionnaire developed by Goldberg, which consited of extraversion, aggreeableness, conscientiousness, neuroticism, and openness to experience. The literature also revealed several common team criteria to evaluate team performance: team member satisfaction, shared …

Single-Family Residential Flood Loss Reduction Through Freeboard, Ehab Said Gnan

LSU Doctoral Dissertations

The lack of flood loss estimation methods conducted on a micro-scale level that consider the full loss‐exceedance probabilities curve poses a significant problem in flood risk assessment. Also, the lack of robust benefit-cost analysis (BCA) that quantifies benefits at the micro-scale level leads to sub-optimal results, and therefore sub-optimal decisions when determining the optimal freeboard. Further, flood loss assessments focus on owner-occupied housing and neglect rental housing. These loss assessment deficiencies underscore the need for a robust assessment that quantifies the life-cycle benefits for all stakeholders and provides actionable information to enable informed decisions.

This research presents a comprehensive methodology …

Propositions For A Resilient, Post-Covid-19 Future For The Aec Industry, Hala Nassereddine, Kyung Wook Seo, Zofia K. Rybkowski, Christian Schranz, Harald Urban

Civil Engineering Faculty Publications

The coronavirus outbreak has challenged and continues to challenge every aspect of the supply chain within the AEC industry, forcing stakeholders to cope with increasing uncertainties and continuous change. The notion of resilience is especially salient now. While the need for the AEC industry to focus on resilience has been highlighted in recent articles, there is a need for a comprehensive discussion on what resilience means for the AEC industry and how companies can create built-in resilience. This paper takes the form of a high-level overview of where the industry is headed and aims to establish eleven propositions for a …

Frequency Effect On Peak Pressure Coefficients Using The Narrowband Synthesis Random Flow Generator (Nsrfg) Method, Zayuris Del Carmen Atencio Mojica

Graduate Theses and Dissertations

The collapse of the Tacoma Narrows Bridge in Washington state in 1940 due to high wind forces gave structural engineers notice of the importance of understanding the behavior of wind forces on infrastructure. Wind forces play an important role in the design of buildings and other structures. ASCE 7-16 is the manual used for the design of these buildings and other structures throughout the country. These design criteria have been approved based on research projects involving experimental procedures. For the design of wind loads, ASCE 7-16 uses criteria based on wind tunnel (WT) tests. However, since the development of computing …

Applications Of Masw And Mhvsr Techniques For Infrastructure Evaluation With A Focus On The Effects Of Different Transformation Techniques And Near-Field Effects On Derived Dispersion Data, Salman Rahimi

Graduate Theses and Dissertations

This dissertation is aimed at understanding two aspects of active surface wave methods to improve the accuracy and reliability of this method. These include (1) the performance of four common wavefield transformation methods for the multichannel analysis of surface wave (MASW) data processing and (2) near-field effects. Toward this end, extensive field measurements were conducted considering different factors affecting these two topics. The MASW and microtremor horizontal to vertical spectral ratio (MHVSR) were then employed to examine their efficiency for infrastructure health monitoring.

Regarding the performance of the four common transformation techniques, it was observed that for sites with a …

Mitigating Calcium Oxychloride Damage In Cementitious Paste And Concrete Utilizing Supplementary Cementitious Materials, Casey Jones

Graduate Theses and Dissertations

It is understood among engineers in the United States (U.S.) that improvement is needed throughout the transportation infrastructure. In the 2021 Infrastructure Report Card produced by the American Society of Civil Engineers, the roadways of this nation merit a D. This leaves room for improvement in order to provide durable pavements throughout this nation. Areas with significant winter weather may have exacerbated effects in decreased roadway longevity due to freezing/thawing cycles and the use of chemical deicers to mitigate gelid roadway conditions. Much research focuses on surface scaling and reinforcement corrosion using these materials; however, joint deterioration, due to chemical …

Building Services Engineering July/August 2021

Building Services Engineering

No abstract provided.

Performance Testing Of Hot Mix Asphalt Modified With Recycled Waste Plastic, Shadi Saadeh, Pritam Katawał

Mineta Transportation Institute

Plastic pollution has become one of the major concerns in the world. Plastic waste is not biodegradable, which makes it difficult to manage waste plastic pollution. Recycling and reusing waste plastic is an effective way to manage plastic pollution. Because of the huge quantity of waste plastic released into the world, industries requiring a large amount of material, like the pavement industry, can reuse some of this mammoth volume of waste plastics. Similarly, the use of reclaimed asphalt pavement (RAP) has also become common practice to ensure sustainability. The use of recycled waste plastics and RAP in HMA mix can …

Novel Eco-Friendly, Recycled Composites For Improved Ca Road Surfaces, Daniel Whisler, Rafael Gomez Consarnau, Ryan Coy

Mineta Transportation Institute

The continued use of structural plastics in consumer products, industry, and transportation represents a potential source for durable, long lasting, and recyclable roadways. Costs to dispose of reinforced plastics can be similar to procuring new asphalt with mechanical performance exceeding that of the traditional road surface.

This project examines improved material development times by leveraging advanced computational material models based on validated experimental data. By testing traditional asphalt and select carbon and glass reinforced composites, both new and recycled, it is possible to develop a finite element simulation that can predict the material characteristics under a number of loads virtually, …

Properties Of Concrete Containing Crushed Limestone As Total Replacement Of Natural Sand And Recycled Engine Oil, Mohammad El Bast M. El Bast, Jamal Khatib, Oussama Baalbaki, Adel Elkordi

BAU Journal - Science and Technology

The rapid growth in the construction industry at the global level has made concrete the most widely used construction material throughout the world. Accordingly, the consumption of natural sand which is one the main raw material constituent of concrete is continuously growing. The demand for river sand is highly increasing due to its scarcity in the market. Manufactured sand produced by crushed rock is being considered as an appropriate alternative to replace river sand in concrete. In recent years, there is a growing interest in the use of crushed sand obtained from limestone quarries in some countries where river sand …