Engineering Commons^™

Interaction Between Micro-Cracking, Cracking, And Reduced Durability Of Concrete: Developing Methods For Considering Cumulative Damage In Life-Cycle Modeling, Zhifu Yang, W. Jason Weiss, J. Olek

JTRP Technical Reports

It is becoming increasingly popular to utilize numerical simulation models to predict the long-term performance of concrete pavements and structures. The majority of these models have been developed using laboratory test data that considers concrete in an uncracked state. While uncracked concrete exists as the best case scenario, frequent cracking occurs in real structures that could have a profound impact on life cycle performance. Cracks from several sources may accumulate and interact thereby accelerating the deterioration of concrete. For example, the distributed cracking caused by freeze/thaw damage can substantially increases the rate of water absorption and reduces the load carrying …

Initial Study For Cost-Effectiveness Of Joint/Crack Sealing, Chuanxin Fang, Khaled A. Galal, David R. Ward, John E. Haddock

JTRP Technical Reports

The sealing and resealing of joints and cracks in PCC, HMA, and composite pavements is assumed to be an important component of pavement maintenance. Recently this practice has been challenged by research indicating that sealing may not be cost-effective. The Indiana Department of Transportation currently spends approximately four million dollars annually to perform joint/crack sealing. The primary objective of the research presented in this report is to investigate the costeffectiveness of joint/crack sealing in relation to pavement performance. The results of a mail survey showed that most states, including Indiana, do not have quantitative justification for sealing policies, nor do …

Underwater Concrete, Dina Adel Nakhla

Archived Theses and Dissertations

Underwater structures represent a significant portion of concrete works worldwide. The utilization of various underwater concrete techniques has indeed minimized the use of costly dewatering processes. Such techniques include the use of special· equipment such as trernie concrete and preplaced aggregate technique. The incorporation of antiwashout admixtures has evolved as a method to minimize the washout of cement and fine particles. As for today, there exists relatively limited information regarding different underwater concreting techniques to facilitate feasible and adequate selection of appropriate methods. This work comprises a survey study and an experimental work to evaluate the impact of using the …

Design Of Durable Concrete Railroad Crossings, Anthony J. Lamanna, Charles F. Scholer

JTRP Technical Reports

Existing precast concrete railroad crossings in the state of Indiana are experiencing too short a life expectancy. This study proposes methods that can be used to produce durable concrete railroad crossings with satisfactory rideability, durability, and longevity. Thirty-two precast concrete railroad crossings were visited in central and northern Indiana. Failures were determined to belong to three major categories: structural capacity causes, environmental causes, and material property causes. A concrete mix was evaluated at three different polyolefin fiber contents and without fibers. Beams were tested in flexure, and modulus of rupture and first crack deflection were recorded for each beam. Cylinders …

Influence Of Curing Conditions On Strength Properties And Maturity Development Of Concrete, Scott Andrew Newbolds, Jan Olek

JTRP Technical Reports

In this study, the results of both laboratory studies and a field study, conducted to evaluate the effects of different curing conditions on the strength properties and maturity development of pavement concrete, are presented. Further, a laboratory study was performed to evaluate the maturity concept in relation to the degree of hydration of cement. Concrete specimens, beams and cylinders, were prepared in the field study. The specimens in the field were cured in one of four curing conditions: lime bath, sandpit, air, or by temperature match curing. Specimens were tested for flexural strength and compressive strength, respectively. The temperature of …

Mid-Panel Cracking Of Portland Cement Concrete Pavements In Indiana, Hung-Ming Chen, Yunus Dere, Elisa D. Sotelino, Graham C. Archer

JTRP Technical Reports

Portland cement concrete slabs are a common form of highway pavements in Indiana. As a result of their widespread use, the economic impact of their maintenance and life span is therefore tremendous. In Indiana, these types of pavements have been experiencing premature random transverse mid-panel cracking. This phenomenon has been observed under a variety of environmental and traffic conditions. Also, it has been found that the cracking occurs in conjunction with the opening of the lanes to traffic, within months of construction. In this project, a research synthesis was carried out to determine exactly what the current state of knowledge …

Development And Evaluation Of Cement-Based Materials For Repair Of Corrosion-Damaged Reinforced Concrete Slabs, Rongtang Liu, J. Olek

JTRP Technical Reports

In this study, the results of an extensive laboratory investigation conducted to evaluate the properties of concrete mixes used as patching materials to repair reinforced concrete slabs damaged by corrosion are reported. Seven special concrete mixes containing various combinations of chemical or mineral admixtures were developed and used as a patching material to improve the durability of the repaired slabs. Physical and mechanical properties of these mixes, such as compressive strength, static modulus of elasticity, dynamic modulus of elasticity, and shrinkage were evaluated. Durability-related parameters investigated included resistance of concrete to penetration of chloride ions and freeze-thaw resistance. The results …

Performance Of Bridge Decks And Girders With Lightweight Aggregate Concrete, V. 2 Of 2, J. A. Ramirez, J. Olek, Eric Joseph Rolle, Brian Joseph Malone

JTRP Technical Reports

Structural lightweight concrete is a very versatile material and Haydite and Minergy lightweight aggregates can be utilized in the mixture development of concrete for use in girders and decks in bridges. More widespread use of lightweight aggregates (LWA) would result in savings in construction cost due to considerable dead load reduction.

The materials phase of this research study evaluated the fresh concrete properties (slump, unit weight, and air content), the mechanical properties of hardened concrete (compressive strength, tensile strength, flexural strength, static and dynamic modulus of elasticity, Poisson’s Ratio, and temperature development), and durability related parameters (air void distribution, freeze-that …

Influence Of Mortar Rheology On Aggregate Settlement, Michael F. Petrou, Baolin Wan, Francis Gadala-Maria, Venkata Giri Kolli, Kent A. Harries

Civil and Environmental Engineering Faculty Research and Publications

The influence of the rheology of fresh concrete on the settlement of aggregate is examined. Fresh concrete exhibits a yield stress that, under certain conditions, prevents the settlement of coarse aggregate, although its density is larger than that of the suspending mortar. Calculations, based on estimates of the yield stress obtained from slump tests, predict that aggregate normally used in concrete should not sink. To test this prediction, the settlement of a stone in fresh mortar is monitored. The stone does not sink in the undisturbed mortar (which has a high yield stress), but sinks when the mortar is vibrated, …

Performance Of Bridge Decks And Girders With Lightweight Aggregate Concrete, J. A. Ramirez, J. Olek, Eric Joseph Rolle, Brian J. Manlone

JTRP Technical Reports

Structural lightweight concrete is a very versatile material and Haydite and Minergy lightweight aggregates can be utilized in the mixture development of concrete for use in girders and decks in bridges. More widespread use of lightweight aggregates (LWA) would result in savings in construction cost due to considerable dead load reduction. The materials phase of this research study evaluated the fresh concrete properties (slump, unit weight, and air content), the mechanical properties of hardened concrete (compressive strength, tensile strength, flexural strength, static and dynamic modulus of elasticity, Poisson’s Ratio, and temperature development), and durability related parameters (air void distribution, freeze-thaw …

Testing Of Multi-Span Bridges With Full Span Precast Prestressed Concrete Panels (Phase 1), Robert J. Peterman, J. A. Ramirez

JTRP Technical Reports

The purpose of this study was to assess the behavior and durability of multi-span bridges constructed with full-span prestressed concrete form panels. The use of full-span prestressed concrete form panels for bridges with spans of 40 ft. or less is an economical method of construction due to the reduction of on-site formwork and labor required by alternate cast-in-place systems. In this research, a pair of two-span bridges utilizing full-span prestressed concrete form panels were fabricated and tested in the Karl H. Kettelhut Structural Engineering Laboratory at Purdue University. Time-dependent effects were monitored during the cast-in-place (CIP) concrete cure period of …

Examination Of Concrete Cores From Lowe’S Store In Bowling Green, David L. Allen, L. John Fleckenstein

Kentucky Transportation Center Research Report

The Kentucky Transportation Center was requested by Mr. Tom Brock, Vice President of McWhorter and Company, Inc., to examine cores obtained from a PCC floor slab of a Lowe's store in Bowling Green, Kentucky. From a telephone conversation with Mr. Brock, is was our understanding that a large portion of the surface of the floor slab was scaling and becoming detached. This apparently involved approximately the top 118 inch of the slab.

Nine cores were delivered to our laboratories. They were obtained at the locations shown in the floor map included in Appendix A. Those nine cores are shown in …

A Study Of Chloride Diffusion Properties Of Concrete At Early Age, W.D. Yeih, R. Huang, J.J. Chang

Journal of Marine Science and Technology

Existence of chloride ions in concrete may accelerate reinforcement corrosion. Chloride ions can penetrate into the concrete by the diffusion process even if no major cracks exist. It is well known that properties of concrete will change with time since the hydration reaction continues for a long time, which implies that the diffusion coefficient of concrete is a time-dependent function. In this research, the diffusion behavior is focused on early-age mortar and concrete. It is shown that the diffusion coefficient changes dramatically at early age; and the control of interface property is significantly important to chloride diffusion. The effect by …

Behavior Of Biaxially Loaded Concrete-Encased Composite Columns, Pedro Ricardo Munoz

Dissertations

The theory of nonlinear behavior of biaxially loaded short and slender composite columns is used to study the load-deformation and moment-curvature of four pin-ended composite column specimens tested under axial compressive load and biaxial bending moments in a single curvature. The accuracy of the test results is verified by comparison with analytical results obtained by a method of analysis that includes the nonlinear material properties of concrete and steel and covers the ascending and descending branches of the linear segmented column specimen. A computational method is presented to model the analytical behavior of the biaxially loaded composite column. Its validity …

Softening Response Of Concrete In Direct Tension, Teresa Cintora

Theses

Due to the increased attention in nonlinear fracture mechanics and numerical methods of cementitious material, it has become necessary to have a reliable investigation of the post-peak softening response of concrete under direct uniaxial loading. But due to the brittleness of the material previous researchers have encountered great difficulty in obtaining complete data regarding the load-deformation behavior. This study uses a strain-controlled testing method and therefore the post-peak curve can be more easily obtained. Based on these results a unique formula for the normalized load vs. deformation curve has been proposed to be applied in fracture analysis applications.

Roller Compacted Concrete For Highway Applications, Jorge Gomez-Dominguez

Indiana Local Technical Assistance Program (LTAP) Publications

A series of laboratory studies were carried out to investigate the behavior and characteristics of Roller Compacted Concrete (RCC) for highway applications.

Performance Survey Of Silicone-Sealed Concrete Pavement Joints, David Q. Hunsucker, Edgar E. Courtney

Kentucky Transportation Center Research Report

This report summarizes field inspections of various silicone-sealed concrete pavement joints. A list of silicone sealant projects was provided by the Kentucky Transportation Cabinet. Observations of performance were subjective and qualitative.

Bridge Decks And Overlays, James H. Havens, Theodore Hopwood Ii, Edgar E. Courtney

Kentucky Transportation Center Research Report

The report presents a historical perspective of the Transportation Cabinet's bridge deck construction and maintenance efforts directed toward increasing bridge deck durability.

Bridge decks crack in specific patterns that primarily depend upon bridge designs. Normal deck cracking is due to load-induced and thermal effects. Each type of cracking has a distinct pattern.

One-hundred and nineteen experimental bridge deck overlays were inspected. Included were 9 membrane bridges, 87 latex concrete overlays and 23 low-slump overlays. The overlays had been placed originally on both new and existing bridge decks on various routes throughout the state. Most of the overlays were rated in …

Shrinkage Compensation Deck Concrete (Ky 1974 Bridge Over Tates Creek Road), David Q. Hunsucker

Kentucky Transportation Center Research Report

This report summarizes the construction activities on an experimental bridge deck utilizing shrinkage compensating concrete. The experimental concrete is characterized in terms of freeze/thaw durability, compressive strength, and elastic moduli.

Thickness Design Curves For Portland Cement Concrete Pavements, Herbert F. Southgate, Robert C. Deen

Kentucky Transportation Center Research Report

Past experience indicates that thickness designs using portland cement concrete best agree with criterion used in the Portland Cement Association's design method for 18-kip EAL of 2 to 3 million or less. For EALs greater than 2 to 3 million, past experience best agrees with criterion developed from the AASHO Road Test. Research herein indicates the two criterion become asymptotic to each other at approximately 2.5 million EAL. For a variation in thickness and elastic moduli in portland cement concrete, dense-graded aggregate, and sub grade elastic modulus, research indicates that a general conic equation (included herein) very closely duplicates the …

Low-Void Concrete Mixtures, Assaf S. Rahal, James H. Havens

Kentucky Transportation Center Research Report

The purpose of this study was to modify concrete mix-design formulas to supplant all water over and above that needed for hydration with a non-evaporable liquid material and(or) a super-water-reducer or plasticizer -- thus producing a low-void concrete. A water-cement ratio of 0.244 - 0.30 was presumed minimal for hydration of the cement. Several polymeric materials, asphalts, oils, and superplasticizers were used. Success was achieved with two latexes, one epoxy, and several superplasticizers. The use of these materials in concrete resulted in improved strength, reduction of air voids and permeability, and enhancement of resistance to corrosive chloride salts.

An Investigation Of Low Cylinder-Strengths (District 6), Assaf S. Rahal

Kentucky Transportation Center Research Report

District 6 has had a lingering problem of low cylinder-strengths. This report describes, in detail, an ensuing investigation which incorporated the use of identical materials of concretes used in District 6 and analyses of cylinder data, in situ concrete cores, and laboratory mixtures. The investigation revealed that a high percent of the in situ concrete is sound and reliable, and that aggregate type and (or) air content were not the cause for the low cylinder-strengths. The quality of making, storing, and curing the cylinders were the reasons for low-strength.

Freeze-And-Thaw Of Concretes And Aggregates, James H. Havens, Robert C. Deen

Kentucky Transportation Center Research Report

This report summarizes several years of research relating to damage to concrete and aggregates undergoing freezing and thawing. Basic principles involving freezing and attendant pressures are considered. Application of these principles to the evaluation of concrete was accomplished in experiments on concrete having low and high air contents. The effects of air entrainment upon freeze-thaw resistance were demonstrated.

Freeze-thaw characteristics of saturated aggregates relative to physical properties such as porosity, absorption, and bulk specific gravity were studied by submerging individual particles in pre-chilled mercury. Pressures associated with popouts in concrete were monitored and are presented along with accompanying theoretical considerations.

Voidless Concrete Mixtures For Bridge Decks, Assaf S. Rahal

Kentucky Transportation Center Research Report

The purpose of this study was to modify concrete mix-design formulas to supplant all water over and above that needed for hydration with a non-evaporable material -- thus producing a no-void concrete. It was adjudged that a water-cement ratio of 0.244 would be practical for hydration of the cement. Several polymeric materials, asphalts, and oils were used to replace the excess mixing water. Success was achieved using two latexes and one epoxy. The use of these materials in concrete resulted in improved strength, reduction of air voids and permeability, and enhancement of resistance to corrosive chloride salts.

An Evaluation Of In-Stream Structures Designed To Provide Fish Habitat, Charles H. Call Jr.

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In-stream concrete structures were studied through model tests and river tests. The model studies indicated that four designs provided good habitat in the model stream. These structures were the inverted weir, the "V" structure, the slab with legs and the cylinder. Through the river studies it was determined that these structures did not influence enough of the total river area to be effective in providing good fish habitat. Also an appreciable amount of yearly maintenance would be required to free the structures from silting in, debris, and vandalism. The slab with legs was the only promising structure.

Construction, Protection And Maintenance Of Concrete Bridge Decks, Ronald D. Hughes, James H. Havens

Kentucky Transportation Center Research Report

This report presents an historical account of deterioration in reinforced concrete bridge decks. Preventative maintenance treatments to both new and in-service decks are discussed. Repair methods are included. The major forms of deterioration are listed and causative mechanisms are discussed. Potential design and construction remedies are presented for consideration.

Durability Of Traffic Paint On Portland Cement Concrete Pavements, Assaf S. Rahal

Kentucky Transportation Center Research Report

Performance of a series of transverse lines applied to a relatively new concrete pavement, utilizing primes and pretreatments, is reported. The report includes descriptions of the location of test lines and types of paint and pretreatments, performance histories, and analysis of results. Chlorinated rubber, epoxy, and urethane paints were the most durable. Neither pretreatment nor the use of primes significantly increased durability.

The Effects Of An Epoxy (Epocast 546) Upon The Tensile And Compressive Properties Of Portland Cement Concrete, Alvy C. Jackson

Civil Engineering ETDs

Although the behavioral pattern of plain concrete in compression is fairly consistent, its tensile properties leave much to be desired. The laboratory investigation described here was an attempt to increase the tensile property of plain concrete by adding an epoxy resin compound to the mixture. The investigation included tests for both compressive and tensile strengths of the mixtures that were considered. The compressive strength tests were included to determine what effect, if any, the attempt to increase the tensile property had on compressive strength.

Concrete Color Variations Observed In Specimens Made From 12 Type 1 Portland Cements, Milton Evans Jr.

Kentucky Transportation Center Research Report

No abstract provided.

A Study Of The Effect Of Blended Coarse Aggregate On Air-Entrained Concrete Progress Report 3, S. T. Collier

Kentucky Transportation Center Research Report

The purpose of this investigetion was to study the durability characteristics of a river gravel, used as coarse aggregate for concrete, with respect to four major fractions separated in accordance to their general mineralogical classification. This aggregate was from the same stock of Ohio River gravel that was used in earlier phases of this Project reported in 1947.

Since this gravel consisted of several rock types varying in mineralogic constituents, it was conceivable that poor performance could possibly be attributed to some undesirable fraction or fractions, rather than to the aggregate as a whole. The separation of this aggregate was …