Engineering Commons^™

Bs News

Building Services Engineering

No abstract provided.

Lateral Resistance Of Ring-Shank Nail Connections In Southern Pine Lumber, R D. Theilen, D A. Bender, David Pollock, S G. Winistorfer

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Ring-shank nails are used in engineered structures with lateral connection design values based on theoretically derived equations which were validated only for common nails. The goal of this study was to quantify the input parameters and lateral connection strength of several types of ring-shank nails in Southern Pine lumber and critically evaluate the applicability of the theoretical equations for ring-shank nails.

Two sizes of galvanized and ungalvanized, hardened steel ring-shank nails from two manufacturers were studied. The hardened, ring-shank nails carried significantly higher loads than the common wire nails studied. Because the current method of determining yield load does not …

Stability And Performance Of Feedback Control Systems With Time Delays, M. S. Ali, Z. K. Hou, Mohammad N. Noori

Office of the Dean (CENG) Scholarship

This paper investigates the time delay effects on the stability and performance of active feedback control systems for engineering structures. A computer algorithm is developed for stability analysis of a SDOF system with unequal delay time pair in the velocity and displacement feedback loops. It is found that there may exist multiple stable regions in the plane of the time delay pair, which contain time delays greater than the maximum allowable values obtained by previous studies. The size, shape and location of these stable and unstable regions depend on the system parameters and the feedback control gains. For systems with …

The Effect Of Pipe Bursting On Nearby Utilities, Pavement, And Structures, Alan Atalah

Doctoral Dissertations

This dissertation has involved field and analytical studies of ground movements, ground vibrations and other design issues associated with trenchless pipe replacement (or pipe bursting, as it is commonly known). The process is used to replace an existing underground service pipe with a completely new pipe but without the disturbance and cost of excavating a trench from the surface. The process typically involves the insertion of a tool into the existing pipe that has a maximum diameter that is slightly larger than the existing pipe. This tool is used to break the existing pipe into pieces and to displace the …

Making Concrete Less Abstract, David Newton Richardson

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

CE 3 13 is a second level properties of concrete lecture course. In an effort to make it appear less abstract to the students, over the course of several semesters several learning strategies were tried, including journaling, muddiest point, entering the academy, role playing, bookends-on-a-lecture, and hands-on lab projects. Most recently, an emphasis on short writing-to-learn papers, a problems-based stance, and an integrated lab project was used. Student evaluations indicated that the lab projects and the increased writing was of significant benefit in promotion of learning.

Effects Of Temperature, Water Hardness, And Recirculation On Copper Corrosion, Brian R. Weiss

Electronic Theses and Dissertations

In previous work, the effects of water quality have been shown to influence the formation of scale from copper corrosion. A general understanding of the effects of water quality on copper corrosion have been difficult to obtain because of complex interactions of water quality variables on copper corrosion in different water supply systems. The objective of this study was to examine the effects of temperature and water hardness on copper corrosion occurring in a household water supply system. The effects of recirculation were also studied in concurrence with the above water quality parameters. Electrochemical corrosion testing and corrosion by -product …

Expedient Method To Determine Active Zone Depth For Expansive Soils In The St. Louis, Missouri Area, Robert Allen Abbott

Masters Theses

"A laboratory testing program was developed to formulate a relationship which could be used to estimate the active zone depth at a given site with the index properties of the potentially expansive soils at the site. The testing program utilized standard consolidometers to incrementally add moisture to soil specimens to determine a swell versus soil suction index. Tests were performed on laboratory manufactured soil specimens of commercial clay to validate the testing methodology.

A QUATTRO PRO computer spreadsheet was developed to perform the calculations to determine the potential field surface heave for the soils tested provided they were at a …

An Integrated Transportation Use Modeling System For Indiana; Implementation Report And User's Manual, Andrew Ying-Ming Yen, Jon D. Fricker

JTRP Technical Reports

The principle objective of this research was to develop an integrated model to represent the interrelationships between land use and transportation, subject to the requirements of the ISTEA of 1991 and the CAAA of 1990. The integrated model includes two major parts: a land-use allocation module and a travel demand module. An interface module has also been built to transform data between these two modules. The land-use allocation module consists of a residential location model, an employment location model, a land use potential model, and a land consumption model. One unique feature of the residential and employment location models is …

An Integrated Transportation Use Modeling System For Indiana, Andrew Ying-Ming Yen, Jon D. Fricker

JTRP Technical Reports

The principle objective of this research was to develop an integrated model to represent the interrelationships between land use and transportation, subject to the requirements of the ISTEA of 1991 and the CAAA of 1990. The integrated model includes two major parts: a land-use allocation module and a travel demand module. An interface module has also been built to transform data between these two modules. The land-use allocation module consists of a residential location model, an employment location model, a land use potential model, and a land consumption model. One unique feature of the residential and employment location models is …

Assessing And Updating Indot's Traffic Monitoring System For Highways (2 Volumes), Samuel Labi, Jon Fricker

JTRP Technical Reports

This study evaluates the existing resources and procedures of INDOT’s current traffic monitoring program, with the objective of transforming this program into a comprehensive Traffic Monitoring System for Highways (TMS/H). Reliable traffic data is a valuable input for studies and decision-making at various levels and in various phases of highway management including planning and design, finance and taxation, legislation and safety. The nature and scope of the various components comprising a TMS/H for any state were identified in available literature such as the Federal Register and Traffic Monitoring Guide. A complete inventory of the existing resources (personnel and equipment) and …

Automation And Standardization Of Measuring Moisture Content And Density Of Soil Using The Technique Of Time Domain Reflectometry, Wei Feng, Chih-Ping Lin, Richard J. Deschamps, Vincent P. Drnevich

JTRP Technical Reports

The methodology developed by Siddiqui and Drnevich (1995) for measuring soil water content and density using Time Domain Reflectometry (TDR) was extended for routine use in the quality control testing of compacted soils. The objectives of the study were to develop computer software to automate data interpretation and data reduction, develop prototype equipment for field use, compare the results of the TDR method with the sand cone and nuclear density methods on actual construction sites and develop draft specifications for ASTM and AASHTO. New prototype equipment was developed for compaction quality control testing. Waveform interpretation and data reduction were automated …

Implementation Of Subgrade Resilient Modulus For Pavement (2 Volumes), A. G. Altschaeffl, Ross A. Duckworth, M. K. Clough

JTRP Technical Reports

This Implementation Project had two purposes: 1) to update the INDOT Division of Materials and Tests’ laboratory equipment and train personnel to properly conduct the testing for subgrade resilient modulus in accordance with new AASHTO testing protocol (AASHTO T0294-94(; 2) to educate and train the geotechnical engineering section in the procedures for determining the design resilient modulus with minimum required testing, while using the database of the previous report on this subject, FHWA/IN/JHRP-92/23, “Subgrade Resilient Modulus for Pavement Design and Evaluation,” Part I of the Final Report, the detailed “Laboratory Procedures Manual,” has been written for use by laboratory technicians …

Implementation Of Subgrade Resilient Modulus For Pavement: Laboratory Procedures Manual (2 Volumes), A. G. Altschaeffl, Ross A. Duckworth, M. K. Clough

JTRP Technical Reports

This Implementation Project had two purposes: 1) to update the INDOT Division of Materials and Tests’ laboratory equipment and train personnel to properly conduct the testing for subgrade resilient modulus in accordance with new AASHTO testing protocol (AASHTO T0294-94(; 2) to educate and train the geotechnical engineering section in the procedures for determining the design resilient modulus with minimum required testing, while using the database of the previous report on this subject, FHWA/IN/JHRP-92/23, “Subgrade Resilient Modulus for Pavement Design and Evaluation,” Part I of the Final Report, the detailed “Laboratory Procedures Manual,” has been written for use by laboratory technicians …

Geotechnical Performance Of Highway Embankment Constructed Using Waste Foundry Sand, Patrick J. Fox, David G. Mast

JTRP Technical Reports

The purpose of this study was to evaluate the use of waste foundry sand (WFS) as a highway embankment material in a fullscale field demonstration project. This evaluation included geotechnical concerns, such as deformation, strength, hydraulic conductivity, and ease of construction. The report presents an introduction and previous research concerning WFS use in highway construction. A geotechnical laboratory testing program characterized the WFS used in the project, which was a waste product of Auburn Foundry, Inc., located in Auburn, Indiana. This study was also a part of the FHWA Priorities Technology Program. The project site was a 275 m section …

Performance Evaluation Of A Highway Embankment Constructed Using Waste Foundry Sand, Barry K. Partridge, James E. Alleman

JTRP Technical Reports

Over 9 million Mg of waste foundry sands (WFS) are produced annually in the United States as a by-product of the metal casting industry. The majority of WFS are deposited in restricted or sanitary waste landfills. Considerable savings is available to the metal casting industry through the development of reuse applications for their WFS and generators are often willing to provide WFS to a job site at no cost to the end user. Laboratory investigations have indicated that WFS from ferrous foundries can provide the necessary engineering properties for a highway embankment and that the MicrotoxTM bioassay test can be …

Assessing And Updating Indot's Traffic Monitoring System For Highways, Volume 1 - Main Report, Samuel Labi, Jon D. Fricker

JTRP Technical Reports

No abstract provided.

Modeling And Optimization Of The Indiana Lane Merge Control System On Approaches To Freeway Work Zones, Part I, Andrzej P. Tarko, Sreenivasulu R. Kanipakapatnam, Jason S. Wasson

JTRP Technical Reports

Severe traffic turbulence on entry sections of freeway work zones increases the delays and risk of crash. A new Indiana Department of Transportation system called Indiana Merge Lane System (IMLS) creates a dynamic no passing zone on the approach to the freeway work zone through the sequence of DO NOT PASS signs. The system is thought to encourage drivers to switch lanes well upstream of the discontinuous lane taper where the merging maneuver is safer and less intrusive. The IMLS is expected to impact drivers’ behavior, their perception of the traffic conditions, and traffic safety.

This research is focused on: …

A Tool For Evaluating Access Control On High Speed Urban Arterials, Part I, Henry C. Brown, Samuel Labi, Andrzej P. Tarko, Jon D. Fricker

JTRP Technical Reports

A highway system serves two needs: mobility and accessibility. Access control techniques are used to restrict access to the highway and improve vehicle flow. The objective of this research was to develop a comprehensive procedure to evaluate access control alternatives. The procedure includes the design and quantitative evaluation of alternatives to select the best one. Evaluation of each alternative includes prediction of turning volumes, delays, crash rates, and economic effectiveness. Several existing models predict traffic delays for signalized intersections and for minor streams at unsignalized intersections. Models are needed to predict delays of arterial streams caused by minor streams at …

Controlling Air Content In Concrete That Is Being Pumped, A Synthesis Study, Charles F. Scholer, Jay Grossman

JTRP Technical Reports

Changes in the air content of fresh concrete that is being pumped can occur at a number of places. These locations include the initial loading of the concrete into the pump hopper, as it passes through the pump line, and when it exits the line. This synthesis reviews the findings of recent research studies which deal with air content change in pumped concrete and summarizes methods of reducing air loss caused by handling. Three main mechanisms by which air content is lost in fresh concrete that is being pumped have been noted. These factors include the high-pressure dissolution of air …

Development Of A 3-D Finite Element Program For Pavement Analysis, Volume 3: Appendix 3, Tatsaba Nilaward, Chiang Shih, Thomas D. White, E. C. Ting

JTRP Technical Reports

A three dimensional finite element program is developed for the analysis of pavement systems. An explicit approach of the finite element analysis is adopted. This approach results in a vector formulation of the equation of motion. Large displacement is considered through the use of a co-rotational approach which considers small deformations and large rotations of the elements. For the convenience of application a two dimensional finite element program is also developed. An eight-node isoperimetric solid element is used for the three dimensional analysis, and a four-node element for the two dimensional analysis. Loading conditions are verified for static ramp and …

Development Of A 3-D Finite Element Program For Pavement Analysis, Volume 2: Appendix 2, Tatsaba Nilaward, Chiang Shih, Thomas D. White, E. C. Ting

JTRP Technical Reports

A three dimensional finite element program is developed for the analysis of pavement systems. An explicit approach of the finite element analysis is adopted. This approach results in a vector formulation of the equation of motion. Large displacement is considered through the use of a co-rotational approach which considers small deformations and large rotations of the elements. For the convenience of application a two dimensional finite element program is also developed. An eight-node isoperimetric solid element is used for the three dimensional analysis, and a four-node element for the two dimensional analysis. Loading conditions are verified for static ramp and …

Identification And Quantification Of Radionuclides In Coal Ash, James E. Alleman, Franklyn M. Clikeman, Thomas Skronski

JTRP Technical Reports

One of the important environmental issues raised recently in regard to coal ash reuse for highway construction purposes (e.g., embankment development) is that of worker, and public, exposure to radiation which might possibly be emitted by these types of residuals. Radiation emission is, in fact, a natural phenomenon for most materials, both natural and man-made, but in the case of coal ash residuals the process of combustion produces an inevitable concentration of radionuclides from the original virgin coal. INDOT’s corresponding environmental concern consequently focuses on the following basic question: does this magnification of radionuclides found within these coal ash residuals …

Modeling And Optimization Of The Indiana Land Merge Control System On Approaches To Freeway Work Zones, Part I: Implementation Report; Part Ii: Manual Of The Indiana Lane Merge Control System (2 Volumes), Andrzej P. Tarko, Sreenivasulu R. Kanipakapatnam, Jason S. Wasson

JTRP Technical Reports

Severe traffic turbulence on entry sections of freeway work zones increases the delays and risk of crash. A new Indiana Department of Transportation system called Indiana Merge Lane System (IMLS) creates a dynamic no passing zone on the approach to the freeway work zone through the sequence of DO NOT PASS signs. The system is thought to encourage drivers to switch lanes well upstream of the discontinuous lane taper where the merging maneuver is safer and less intrusive. The IMLS is expected to impact drivers’ behavior, their perception of the traffic conditions, and traffic safety. This research is focused on: …

Strength And Durability Of Concrete: Effects Of Cement Paste-Aggregate Interfaces, Part I: Theoretical Study On Influence Of Interfacial Transition Zone On Properties Of Concrete Materials, Yiguo Zhang, Wai-Fah Chen

JTRP Technical Reports

This research was based on a two-part basic research investigation studying the effects of cement paste-aggregate interfaces (or interfacial transition zones-HZ) on strength and durability of concrete. Part I dealt with the theoretical study and Part II dealt with the experimental. Part I, the theoretical part, illustrates the effect of ITZ on the concrete properties by assuming its elastic moduli to be varied continuously in the region. A four-phase composite model is employed and three functions are chosen to model the moduli variation in the ITZ. A theoretical solution for an n-layered spherical inclusion model is used to estimate the …

Development Of A 3-D Finite Element Program For Pavement Analysis, Volume I: Introduction And Appendix 1, Tatsaba Nilaward, Chiang Shih, Thomas D. White, E. C. Ting

JTRP Technical Reports

A three dimensional finite element program is developed for the analysis of pavement systems. An explicit approach of the finite element analysis is adopted. This approach results in a vector formulation of the equation of motion. Large displacement is considered through the use of a co-rotational approach which considers small deformations and large rotations of the elements. For the convenience of application a two dimensional finite element program is also developed. An eight-node ¶metric solid element is used for the three dimensional analysis, and a four-node element for the two dimensional analysis. Loading conditions are verified for static ramp and …

Bs News

Building Services Engineering

No abstract provided.

Strength And Durability Of Concrete: Effects Of Cement Paste-Aggregate Interfaces, Part Ii: Significance Of Transition Zones On Physical And Mechanical Properties Of Portland Cement Mortar, Turng-Fang F. Lee, Menashi D. Cohen

JTRP Technical Reports

This research was based on a two-part basic research investigation studying the effects of cement paste-aggregate interfaces (or interfacial transition zones-HZ) on strength and durability of concrete. Part I dealt with the theoretical study and Part II dealt with the experimental. Part I, the theoretical part, illustrates the effect of ITZ on the concrete properties by assuming its elastic moduli to be varied continuously in the region. A four-phase composite model is employed and three functions are chosen to model the moduli variation in the ITZ. A theoretical solution for an n-layered spherical inclusion model is used to estimate the …

A Methodology For The Analysis Of Its Impacts On Mobility, Air Quality, And Land Use, Kumares C. Sinha, Srinivas Peeta, Muhammed Amer Sultan, Kamalakar Poonuru, Nadine-Jenelle K. Richards

JTRP Technical Reports

The Indiana Department of Transportation (INDOT) is currently implementing (or has implemented) several components of Intelligent Transportation Systems (ITS). This includes a mini Advanced Traffic Management Systems (ATMS) implemented on a three-mile stretch of the Borman Expressway to evaluate advanced non-intrusive sensor systems and the associated communication infrastructure for the installation of a full-scale ATMS on the 16-mile stretch of the Borman Expressway. Potential specific ITS technologies that are either being implemented or are being considered include pre-trip information, en-route information, variable message signs, and Hoosier Helpers. It is expected that the implementation of various ITS technologies on the Borman …

A Tool For Evaluating Access Control On High Speed Urban Arterials, Part Ii: User's Manual, Henry C. Brown, Samuel Labi, Andrzej P. Tarko, Jon D. Fricker

JTRP Technical Reports

A highway system serves two needs: mobility and accessibility. Access control techniques are used to restrict access to the highway and improve vehicle flow. The objective of this research was to develop a comprehensive procedure to evaluate access control alternatives. The procedure includes the design and quantitative evaluation of alternatives to select the best one. Evaluation of each alternative includes prediction of turning volumes, delays, crash rates, and economic effectiveness. Several existing models predict traffic delays for signalized intersections and for minor streams at unsignalized intersections. Models are needed to predict delays of arterial streams caused by minor streams at …

Integration Of Real-Time Air Pollution Parameters Into The Decision Making Process Regarding Highway Construction Work Zone Traffic Flow Requirements (Phase 1), Ouattara Fatogoma, Todd A. Premo, Robert Bertram Jacko

JTRP Technical Reports

The Midac Fourier Transform Infrared air monitoring system was used to measure real-time vehicular exhaust emission concentrations of carbon monoxide (CO) and hydrocarbons (HCs) during the Purdue Vehicle Emission Monitoring and Modeling Project (PVEMP) conducted in spring and summer 1997. The experiments took place on the Borman Expressway, in Gary. Indiana and on 1-65, south of Lafayette, Indiana Concurrently, two speed-readings were acquired from the passing vehicles in the vicinity of the air monitoring system using a hand-held laser gun. The speeds were integrated to determine the speeds and accelerations of the passing vehicles at the spectrometer. An 8-mm camcorder …