Engineering Commons^™

Development Of A Structured Concrete Thermocline Thermal Energy Storage System, Bradley M. Brown

Graduate Theses and Dissertations

The past couple of decades have shown a concern when considering the way the world obtains its power. The focus has been switching from fossil fuels that have been used for hundreds of years to renewable energy sources, such as the sun. Solar energy is readily and infinitely available for harnessing. One problem with solar energy, though, is its inability to be used during the night time and during cloud covered weather. A solution to this problem is the use of energy storage mechanisms. For solar plants that use solar thermal energy (concentrating solar power plants), thermal energy storage (TES) …

Using Gis-Based, Hitchcock Algorithm To Optimize Parking Allocations For Special Events, Wayne A. Sarasua, Prashant Malisetty, Mashrur Chowdhury

Publications

Clemson, a small college town in South Carolina, deals with a massive over-saturation of its transportation system during special events, especially during home football games, resulting in total system failure. This research has developed a methodology to optimize parking, using a Geographic Information System (GIS)-based transshipment algorithm, and it has produced great time savings compared with the individual, “manual” efforts of thousands of drivers attempting to find spaces where available. As such, this research constitutes an effective implementation of the Hitchcock Transportation Algorithm for solving a transshipment problem applied to parking lot distribution. Because the Hitchcock Algorithm considers the network …

The Integration Of Building Information Modeling (Bim) Into Civil Engineering Curricula, Jason Cooksey

All Theses

Building Information Modeling (BIM) is an emerging technology used in the Architecture/Engineering/Construction (AEC) industry. The proliferation of BIM usage across the industry has been swift and prolific. Academia has lagged behind the adoption rate of the industry by not producing enough students with BIM exposure. Thus, the question is whether civil engineering curricula should provide an understanding of BIM technology to students entering the design and construction profession. The immediate objective of this research is to determine if it is important to provide exposure of BIM to undergraduate or graduate students in the civil engineering curricula and if so to …

Determining Transverse Design Forces For A Next-D Bridge Using 3d Finite Element Modeling, Robert Funcik

All Theses

This thesis looks into the use of 3D Finite Element Modeling to determine the transverse design forces for short-span bridges built using the Northeast Extreme Tee with integral deck (NEXT-D) beam. Models were built using either solid elements or shell elements to represent the bridge deck, and the results were compared. The stiffness of the shear keys were taken into account during the modeling process. Results were compared to the AASHTO strip width method for design bridge decks, and the results showed that the strip width method would not be adequate for the design of NEXT-D bridges, so specific live …

A Methodology For Estimating And Comparing The Lifecycles Of High-Build And Conventional Waterborne Pavement Markings On Primary And Secondary Roads In South Carolina, Joseph Robertson

All Theses

Highway pavement markings constitute a vital component of roadway transportation systems and provide crucial visual cues for the basic driver task of following the road. In 2008, the South Carolina Department of Transportation (SCDOT) initiated a multi-year study to evaluate pavement markings on non-interstate primary and secondary roads in South Carolina. This thesis discusses development of a methodology for estimating and comparing the lifecycles of high-build and conventional waterborne pavement markings based on retroreflectivity levels. The methodology was developed using nearly 3 years of field data from 66 sites throughout South Carolina. This thesis provides an overview of data collection …

Fault-Tree Model For Bridge Collapse Risk Analysis, Caitlyn Davis-Mcdaniel

All Theses

Bridges are vital components of the United States surface transportation infrastructure and, moreover, support the growth of our nation's economy. However, over the past few decades the design capacity and service condition of many bridges in the U.S. has been challenged. Numerous incidents of bridge collapse call for an urgent need to develop a systematic method of assessing the failure risks and identifying the initiating events that can lead to a bridge collapse. This thesis presents a process of bridge failure risk analysis through fault-tree modeling and identification of specific countermeasures, to minimize failure risk, related to structural health monitoring …

Water Quality Models For Stormwater Runoff In Two Lincoln, Nebraska Urban Watersheds, Jake Fisher

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Water quality monitoring was conducted in two urban watersheds (Colonial Hills and Taylor Park) located in southeast Lincoln, NE over a three year period spanning from October 2008 through September 2011. In-line probes continuously measured for turbidity, conductivity, dissolved oxygen, and water temperature while other water quality constituents were analyzed for discrete water samples collected using grab and automatic sampling techniques. The water quality data was used to calculate event mean concentrations (EMCs) for sixteen storm events sampled over the duration of the project period. Three types of stormwater quality multiple linear regression models were developed for the estimation of …

Water Quality Monitoring Of An Urban Stream For Total Maximum Daily Load Assessment, Jeffrey K. Mihulka

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The purpose of this research project was to assess the water quality of an urban stream for total maximum daily load assessment in Omaha, Nebraska. This was accomplished by sampling the water quality at four different sites. These sites included sampling upstream, within, and downstream of the city. These samples were conducted throughout 2010 and 2011.

The results showed that concentrations of Escherichia coli (E. coli) are routinely above established criteria for the state of Nebraska. Concentrations of E. coli that exist in the Papillion Creek Watershed upstream of the City of Omaha have also been shown to be above …

Temporal Pier Scour Evolution Under Stepped Hydrographs, Mark Schillinger

All Theses

The present study was aimed at measuring the scour hole profile at bridge piers under clear water scour. Scour tests were performed under both steady state flow and under stepped hydrographs. Multiple smaller flood events were run to determine how flood history affects scour hole development. Various equilibrium scour depth equations and proposed temporal scour models were compared. The similarity of the scour hole profiles with time and flow history were evaluated.
Experiments were conducted in a 14.8 m long, 1.19 m wide, 1.22 m deep rectangular flume with a model bridge pier. A uniform sediment bed (d₅₀= …

Analysis And Parameterization Of The Flight Of Ember Generation Experiments, Hillary Harris

All Theses

This thesis presents a study on ember flight modeling based on a series of wind tunnel experiments. The purpose of these experiments and the data collected was to provide the input conditions for an ember flight model in order to compare and validate the model predictions. An analysis was performed which determined the sensitivity of model predictions of downwind mass distribution to uncertainties in the model input parameters.
From the wind tunnel experiments, flight distances were measured and characteristic ember size distributions were obtained from the collected data. A flight model was developed based on standard models published in the …

Robust Design And Monitoring Tools For Sustainable And Resilient Structural Design And Infrastructure Management, Sarah Dalton

All Theses

Structural systems are subject to inherent uncertainties due to the variability in many hard-to-control `noise factors' that include but are not limited to external loads, material properties, and construction workmanship. Two design methodologies have been widely accepted in the practicing engineering realm to manage the variability associated with operational structures: Allowable Stress Design (ASD) and Load and Resistance Factor Design (LRFD). These traditional approaches explicitly recognize the presence of uncertainty; however, they do not take robustness against this uncertainty into consideration. Overlooking this robustness against uncertainty in the structural design process has two drawbacks. First, the design may not satisfy …

Development And Application Of A Three-Dimensional Probabilistic Wind-Borne Debris Trajectory Model, James Grayson

All Theses

This research presents a probabilistic debris trajectory model adapted from current 6-degree-of-freedom (6-DoF) deterministic models, in which the aleatoric (inherent) uncertainty is explicitly considered in the proposed probabilistic model. While the inherent randomness in the debris flight trajectory is irreducible due to the wind turbulence, variation in wind direction, gustiness of the wind event and so forth, the proposed probabilistic model seeks to address these uncertainties through Monte Carlo simulations with the appropriate statistical distributions applied to the governing equations of motion of the debris. Verification of the probabilistic debris trajectory model is performed through an analytical and visual comparison …

Influence Of Warm Mix Additives Upon High Rap Asphalt Mixes, William Rogers

All Dissertations

This study was conducted to determine the effect of warm mix (WMA) modifiers on asphalt mixes containing high percentages of reclaimed asphalt pavement (RAP). Mixes were created using three aggregate sources, four RAP percentages (0%, 20%, 35%, and 50%), and three warm mix modifiers (HMA, zeolite, and Sasobit®). Base binders from the same source (PG 64 -22, 58 -28, 52 -28) and one rejuvenator were used for each mix to ensure the final blended binder grade was at least PG 64 -10.
Specimens were created at HMA or suggested WMA temperatures and tested for rut depth, indirect tensile strength (ITS), …

Effects Of High-Impedance-Contrast Boundary Upon Multi-Modal Seismic Surface Wave Data, Prajwol Tamrakar

UNLV Theses, Dissertations, Professional Papers, and Capstones

Synthetic studies and analyses of an experimental dataset were conducted to address the use of Rayleigh-type surface waves for estimation of shear wave velocity (VS) profiles of shallow bedrock sites. The shallow bedrock presents a high impedance contrast boundary which causes surface wave energy to be partitioned to higher modes. Idealized studies of hypothetical datasets and root-mean-squared calculations of error surfaces showed that if reliable dispersion data are available over a broad frequency spectrum, the VS profile can be recovered using the fundamental mode alone. However, when dispersion data are limited to a relatively narrow frequency band representing what might …

Evaluating The Cost-Effectiveness Of Roadside Culvert Treatments, Francisco Daniel B. De Albuquerque, Dean L. Sicking, Ronald K. Faller, Karla A. Lechtenberg

Department of Civil and Environmental Engineering: Faculty Publications

Roadside cross-drainage culverts have been found to affect vehicle accident injury levels. As a result, highway designers have commonly used three safety treatments to protect errant motorists from striking culvert openings. These safety treatments have included: culvert extension, guardrail installation, and the application of safety grating. However, the identification of the most appropriate safety treatment for roadside culverts may be challenging; accident costs may dramatically change under different road and traffic characteristics. The purpose of this study was to estimate accident costs for a wide range of road and traffic scenarios and then define the safest treatment (i.e., treatment with …

Influence Of Pavement Type On Near Surface Air Temperature, David Duncan

All Theses

Effects from an Urban Heat Island (UHI) can be detrimental to the world as a whole. This study examines a collection of permeable and conventional pavements in South Carolina to determine how they relate to near surface air temperatures, which is an indicator of the UHI impact of an area. Three locations were used, each with a different selection of pavement type. Permeable and conventional forms of both asphalt and concrete were tested, as were some open graded friction course samples. Air temperatures were measured and recorded from the pavement surface up to an elevation of 60-in.
Multiple days of …

Hydraulic Conductivity Of Environmentally Controlled Landfill Liner Test Pad, Camila Maldonado Soria Galvarro

Civil Engineering Undergraduate Honors Theses

Laboratory and field hydraulic conductivity tests have been conducted on soil samples to develop and verify the zone of acceptance for liner placement. Compaction testing and flexible wall hydraulic conductivity tests were performed on fifteen (15) samples to determine the dry unit weight, molding water content, and laboratory permeability. Five of the fifteen samples were compacted at Standard proctor energy, five were compacted at 75 percent of Standard proctor energy, and five were compacted at 50 percent of Standard proctor energy. The results obtained from the laboratory portion of the testing program (the zone of acceptance) are presented. A ten …

Reducing Moisture Damage In Asphalt Mixes Using Recycled Waste Additives, Anthony John Boyes

Master's Theses

This thesis has determined that using fly ash as a mineral filler in asphalt pavements can help strengthen and reduce asphalt moisture damage. Also, dynamic shear rheometer tests show that these additives have a stiffening effect on asphalt binder. Moisture related damage is considered one of the main causes of asphalt pavement failure. As water infiltrates a layer of asphalt, it slowly strips away asphalt binder, weakening the aggregate/binder bond. This process, combined with the cyclic loading of traffic, can lead to several different types of asphalt failure including rutting, raveling, bleeding, and cracking. For several decades, research has been …

Dimensional Stability Of Geosynthetic Clay Liners In Landfill Applications, Gregory R. Olsen

Master's Theses

An investigation was conducted related to the dimensional stability of geosynthetic clay liners (GCLs) in landfill applications. Multiple occurrences of panel separation of overlap seams in GCLs have been documented; however, explanation for the relative contribution of various mechanisms causing shrinkage has been limited. A systematic test program was conducted to determine the effects of a variety of conditions on GCL dimensional stability.

Effects of initial moisture content, permeant type, and overburden pressure were tested by subjecting various GCL products to wet-dry cycles and measuring the dimensional change with each cycle. Different GCL types were each tested under various combinations …

Probabilistic Approaches To Stability And Deformation Problems In Braced Excavation, Zhe Luo

All Dissertations

This dissertation is aimed at applying probabilistic approaches to evaluating the basal-heave stability and the excavation-induced wall and ground movements for serviceability assessment of excavation in clays. The focuses herein are the influence of spatial variability of soil parameters and small sample size on the results of the probabilistic analysis, and Bayesian updating of soil parameters using field observations in braced excavations.
Simplified approaches for reliability analysis of basal-heave in a braced excavation in clay considering the effect of spatial variability in random fields are presented. The proposed approaches employ the variance reduction technique (or more precisely, equivalent variance method) …

Fluid Mud Underflows In Coastal Dredge Disposal, Mijanur Chowdhury

All Dissertations

This manuscript presents the results of a thorough theoretical and experimental investigation on fluid mud underflows generated in a typical coastal dredge disposal operation. The main goal of this investigation is to understand the propagation dynamics of fluid mud underflows that depends upon a number of factors, including: concentrations, rheological properties and released configurations of fluid mud. Laboratory experiments were conducted with different initial fluid mud concentrations in three different experimental set-ups: rectangular flume for constant volume release, rectangular flume for constant flux release, and a square pool for radial constant flux release of fluid mud. The experiments in the …

Sensitivity Analysis On Mapping Evapotranspiration At High Resolution Using Internal Calibration (Metric), Venkata Naga Ravi Kumar Choragudi

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Mapping EvapoTranspiration at high Resolution using Internal Calibration (METRIC) is most widely used to quantify evapotranspiration (ET) spatially and temporally. It is essential to inspect the model’s response to errors in various parameters used in the model. Landsat 5 images from May 30 2009, July 1 2009 and a Landsat 7 image from September 27 2009 are used in this study. Fourteen different fields composed of Corn, Soybeans, Alfalfa are randomly chosen for each crop type.

Two kinds of errors are addressed in this study. One, with the errors that are transferred and potentially compensated by calibration (Global error) and …

Development Of A Design Procedure For Concrete Traffic Barrier Attachments To Bridge Decks Utilizing Epoxy Concrete Anchors, Benjamin J. Dickey

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

A guide for the design of epoxy anchors for the use in concrete traffic barriers was developed in this study. A series of dynamic bogie tests and static tests was conducted on single and double anchors. The dynamic increase factor for the noted anchors was determined to be 1.06. Protective epoxy coatings for the anchors was observed to contribute to a 9 percent decrease in anchorage strength. The effects of anchors located in close proximity to each other was also investigated. Calibration factors were developed to apply recommended changes to the ACI code for use in bridge rail anchorages.

A …

Expanding The Length Of Jointless Bridges By Providing Rotational Capacity Over The Pile Head, Ardalan Sherafati

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Jointless bridges have been in service for more than 50 years. Since no expansion joint is utilized in these structures, they have longer service life, reduced maintenance and construction costs, improved riding quality, and added redundancy. Because of integrity of the superstructure with the substructure, the thermal movements as well as other longitudinal movements are transferred to substructure. These lateral movements can induce relatively large forces and moments in the substructure elements including the abutment and the piles. Typically, flexible foundations which include single row of piles are preferred in jointless bridges to reduce the stiffness of the system against …

Analyzing Of Tort Claims And Lawsuits Against South Carolina Department Of Transportation Through Classification And Regression Tree Analysis, Sara Familian

All Dissertations

After losing sovereign immunity in 1985, SCDOT employees now focus a significant amount of time in processing tort claims and lawsuits filed against the agency. This is an important issue for transportation agencies considering the fact that money spent defending tort claims and lawsuits, is no longer available for safety and mobility improvements on the state highway system.
The South Carolina Department of Transportation (SCDOT) processes approximately one thousand claims per year and is engaged in nearly one hundred lawsuits per year. SCDOT has paid just over a half million ($523,607) to settle on 1007 claims - approximately 1/3 of …

Laser Particulate Counter Calibration To A Micro-Orifice Uniform-Deposit Impactor, Benjamen Fredrich Seely

Boise State University Theses and Dissertations

In semi-arid regions, like southwest Idaho, snowmelt is a significant source of water. Anthropogenic activities continue to increase demand for this vital natural resource. Water resource managers must be able to quantify both the timing and quality of snowmelt. Atmospheric contaminants can deposit on the snow, altering its physical properties. For example, deposition of atmospheric particulate matter (PM) can cause snow to darken, thereby increasing radiative forcing on the snowpack, potentially causing a change in snowmelt timing.

This research is to calibrate a laser particulate counter (LPC) to a federal reference standard. The LPC provides real-time PM concentration data and …

Wim Based Load Models For Bridge Serviceability Limit States, Przemyslaw Rakoczy

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The safety of aging bridge inventory is one of the main concerns of the state and federal agencies. Therefore, there is a need to quantify the safety margin of existing infrastructure and new design bridges. The Serviceability Limit States, i.e. fatigue, requires additional statistical parameters and not only the maximum values but also load spectra, i.e. frequency of occurrence of loads. The maximum values are needed for shorter time periods, such as day, week, month or year. Load spectra as well as material resistance are random variables. To quantify the safety margin of existing and future bridges load and resistance …

Flexible Connection Elastomeric Rubber As A Pounding Resisting Element Between Two Adjacent Buildings, Yuskar Lase, James Jatmiko Oetomo

Makara Journal of Technology

Flexible Connection Elastomeric Rubber as a Pounding Resisting Element between Two Adjacent Buildings To solve pounding problem of two adjacent buildings, structural designer usually employs a dilatation between the structures or make the two structures as a monolith structure. Other alternative is by using an elastomeric rubber as a pounding resisting element between the two structures. Effectiveness in applying elastomeric rubber component as flexible connection of two adjacent structures is the main focus of this paper. Various simulations such as structure models, earthquake excitations and openings in gap element are studied. Observation of maximum structural responses will be performed for …

Improvement Of High Temperature Oxidation Of Low Carbon Steel Exposed To Ethanol Combustion Product At 700 °C By Hot-Dip Aluminizing Coating, Mohammad Badaruddin

Makara Journal of Technology

Low carbon steel (AISI 1005) was coated by hot-dipping into a molten Al-10% Si bath at 700 °C for 18s. After hotdipping treatment, the coating layers consisted of Al, Si, FeAl3, τ5-Fe2Al8Si, and Fe2Al5. The bare steel and the aluminized steel were isothermally oxidized at 700 °C in ethanol combustion product at atmospheric pressure for 49 h. The aluminized steel shows good performance in high temperature oxidation because the formation of Al2O3 layer on the coating surface. The growth of iron oxide nodules on the surface coating was accelerated by rapid outward diffusion of Fe-ions due to the presence of …

Effect Of Copper Addition On Mechanical Properties And Electrical Conductivity Of Pp/C-Cu Bipolar Plate Composites, Anne Zulfia, Taufik Abimanyu, Verina Warga Dalam

Makara Journal of Technology

Effect of Copper Addition on Mechanical Properties and Electrical Conductivity of PP/C-Cu Bipolar Plate Composites. Bipolar plate is a major component in PEM fuel cell which possess main function of collecting and removing electrons from anode to cathode. Therefore, materials for bipolar plates produced must have high electrical conductivity. To obtain bipolar plate materials which is cheap, lightweight and high conductivity, so it is developed bipolar plates material based on PP/C-Cu composite. PP/C-Cu composites has been made by mixing all materials then compounding, rheomix, hot blending and hot press. Cu (Copper) has been used various from 0.1 wt%, 1 wt% …