Engineering Commons^™

Effect Of Side Edge Distance And Concrete Materials On Corrosion In Precast Prestressed Concrete Panels, Dayi Zhang

Masters Theses

"This study involved the spalling problem found in some partial-depth precast prestressed bridge decks in the state of Missouri. Recently, panels of several bridges have exhibited corrosion of the prestressing steel tendons causing concrete spalling at the edges of panels. Some of the exposed tendons are corroded to the point of rupture. The effect of factors, namely concrete side edge distance and concrete material type, on steel corrosion in chloride-contaminated reinforced concrete was investigated in this study. Wet-dry cycle tests and accelerated corrosion tests were carried out on sixty-three specimens designed with three different side edge distances and three different …

Hardened Mechanical Properties And Durability Performance Of Specialized Concretes, Kyle Richard Holman

Masters Theses

"Concrete is one of the most produced and utilized materials in the world. Due to the labor intensive and time consuming nature of concrete construction, new and innovative concrete mixes are being explored. Self-consolidating concrete (SCC) is one such method of improving the overall cost and time efficiency of concrete production. SCC is a highly flowable form of concrete. This characteristic drastically reduces the amount of labor and time needed to place the concrete. The highly flowable nature also allows for much easier placement in applications of highly congested reinforcement.

Another rising concern in today's construction industry is environmental responsibility. …

Bs News January/February

Building Services Engineering

No abstract provided.

The Performance And Modification Of Recycled Electronic Waste Plastics For The Improvement Of Asphalt Pavement Materials, Baron W. Colbert

Dissertations, Master's Theses and Master's Reports - Open

Bulk electric waste plastics were recycled and reduced in size into plastic chips before pulverization or cryogenic grinding into powders. Two major types of electronic waste plastics were used in this investigation: acrylonitrile butadiene styrene (ABS) and high impact polystyrene (HIPS). This research investigation utilized two approaches for incorporating electronic waste plastics into asphalt pavement materials. The first approach was blending and integrating recycled and processed electronic waste powders directly into asphalt mixtures and binders; and the second approach was to chemically treat recycled and processed electronic waste powders with hydro-peroxide before blending into asphalt mixtures and binders. The chemical …

The Quantification Of The Fly Ash Adsorption Capacity For The Purpose Of Characterization And Use In Concrete, Zeyad Tareq Ahmed

Dissertations, Master's Theses and Master's Reports - Open

Fly ash has been shown to be an effective replacement for portland cement in concrete mixtures. However, many fly ash materials contain unburned carbon from the combustion process. Unburned carbon in fly ash adsorbs air entraining admixtures (AEAs) reducing their effectiveness in providing a specified air void system in concrete materials. Measurement tools and methods for characterization of the adsorption properties of fly ash materials are necessary for beneficial use of fly ash materials in concrete. In this research, two methods were developed to measure and quantify the adsorption capacity AEAs on fly ash materials. The first method is the …

Pvc Stay-In-Place Panel Covers For Tilt-Up And Pre-Cast Construction, Purdue Ect Team

ECT Fact Sheets Archive

Octaform™ stay-in-place concrete forming system is PVC insulated concrete form system. These forms have been used in the industry for various applications to improve the insulation and corrosion resistance of structures. Octaform™ has developed the panel covers so the advantages of PVC stay-in-place concrete forming systems could be applied to tilt-up and pre-cast construction.

Conx Chassis System, Purdue Ect Team

ECT Fact Sheets Archive

Often referred to as a full-scale “Erector Set”, the ConX System applies technology to the building industry resulting in dramatic efficiencies. The systems approach is made possible by employing automated and efficient processes, from design through fabrication, shipping, and field assembly.

Nightbreeze™: Integrated Heating, Ventilation And Cooling System, Purdue Ect Team

ECT Fact Sheets Archive

NightBreeze™ provides ventilation cooling automatically, eliminating the necessity of operating windows. NightBreeze™ uses the heating/air conditioning system fan to bring in filtered outside air and flush out warm, stale indoor air. The system also allows you to select the lowest temperature you want the house to reach overnight.

Cmic Xprojects, Purdue Ect Team

ECT Fact Sheets Archive

xProjects is a cloud based collaboration and project management solution that resolves the interoperability issues associated with integrated project delivery (IPD) and electrifies the IPD process by enabling capital project owners to collaborate seamlessly with multiple project stakeholders. Using XML adapters to create connections between systems, CMiC Real Time Integration (RTI) tags data so it can be transferred bi-directionally between participants within the project ecosystem with no loss of information or the need for re-entry.

Autodesk Buzzsaw®, Purdue Ect Team

ECT Fact Sheets Archive

Autodesk® Buzzsaw® is a software solution enabling the successful execution of construction projects through a central database, collaboration and communication with access control. The software has capacities of exchanging and viewing drawings, schedule reminders and specifications. Users can directly comment on AutoCAD drawings with the date of comment and name of commenter displayed.

Bidtool.Net: An Integrated Web-Based Approach For Commercial Bid Data Management And Networking, Purdue Ect Team

ECT Fact Sheets Archive

BidTool is basically a web-based portal that allows the distribution and transfer of key commercial construction project data. Owners, architects, designers, engineers, estimators, contractors, material suppliers & construction professionals find track and manage everything from architectural plans specifications and renderings to action items and scheduling requirements such as bid due dates, pre bid meetings and bid results.

Contour Crafting, Purdue Ect Team

ECT Fact Sheets Archive

Victims of disasters such as floods, earthquakes and war have to seek shelter elsewhere. A need arises to rapidly construct houses on site and at minimal cost. This will eliminate the need to transport pre-fabricated shelters long distances, saving the time and costs associated with transportation. Since Contour Crafting is an automated process, labor needs are highly minimized allowing relief workers to allocate their time and effort to rebuilding local infrastructure such as water sanitation and distribution systems, roads, electrical and communication systems as well as irrigations systems.

Super Flex Wall - New Frame System For High Rise Buildings, Purdue Ect Team

ECT Fact Sheets Archive

The "Super Flex Wall" is a structural frame method newly developed by the Takenaka Corporation, used in combination with a core wall (the earthquake-resistant reinforced concrete wall penetrating through the center of the building from the lower part to the top floor) and a structural control method or with a base-isolation method. Part of the structure is cantilevered from the central core along the periphery of the building.

Carbon Frp Grid Structures For Use In Reinforcing Concrete, Purdue Ect Team

ECT Fact Sheets Archive

Carbon FRP Grids are structural reinforcement materials that improve the performance of concrete structures such as insulated wall panels, architectural panels, double tee parking garage tee beams, concrete countertops and other products. The carbon grids can be used in place of welded wire mesh in most structures and is imbedded the same way as a welded wire mesh.

Conx Space Frame System, Purdue Ect Team

ECT Fact Sheets Archive

Off-site manufacture is one of the key initiatives being used by contractors to achieve these goals. Sandwich Plate System (SPS) Floors deliver a compelling off-site solution for structural floors. Their composite steel panels provide a similar performance to concrete floors at one quarter the weight, 10 - 15% shorter project schedules and broader benefits such as reduced complexity and the elimination of the majority of wet-work above ground level.

Optimal Advance Detector Location For Green Termination Systems On High-Speed Isolated Rural Intersections, Lili Du, Anuj Sharma, Srinivas Peeta

Department of Civil and Environmental Engineering: Faculty Publications

This study seeks to identify the optimal location of an advance point traffic detector (APTD) to support green termination algorithms for enhanced dilemma zone protection systems at high-speed isolated signalized rural intersections. This is done by developing a nonlinear optimization model with the objective to maximize the opportunities to predict empty dilemma zones during a look-ahead time period subject to the prediction accuracy which is manifested through prediction efficiency and safety constraints in the model. The distance of the APTD from the stop bar of the intersection represents the decision variable. The Golden-Section line search algorithm combined with numerical integration …

Head Ejection During Barrier Impacts, Scott K. Rosenbaugh, Ronald K. Faller, Dean L. Sicking

Department of Civil and Environmental Engineering: Faculty Publications

During oblique vehicular impacts with longitudinal barriers, an occupant’s head is often ejected out of a side window. When this occurs, the occupant’s head can contact the barrier or an object attached thereto. This impact event, often termed head slap, normally produces a serious injury or fatality. Roadside barriers and any attached hardware should be designed with sufficient offset at the top to preclude head slap for most impact conditions. The goal of this study was to identify the extent of head ejection that can be expected during high-speed crashes with longitudinal barriers. High-speed videos of full-scale vehicle crash tests …

Drop Weight Testing On Sandwich Panels With A Novel Thermoplastic Core Material, Christopher Y. Tuan

Department of Civil and Environmental Engineering: Faculty Publications

A series of drop weight tests were conducted to evaluate the dynamic flatwise compression strength and flexural strength of sandwich panels with a novel core structure. This sandwich core material, known as Norcore, consists of interconnected cells in a unique configuration of truncated pyramid with sloping cell walls. Core materials made of thermoplastic including virgin Lexan, polycarbonate, polycarbonate regrind, high-impact polystyrene, and acrylonitrile butadiene styrene were tested. The test results showed that these sandwich panels have good strength as well as energy absorption capacities.

Evaluation Of Ice-Melting Capacities Of Deicing Chemicals, B. M. Gerbino-Bevins, Christopher Y. Tuan, M. Mattison

Department of Civil and Environmental Engineering: Faculty Publications

Common deicing chemicals include sodium chloride, magnesium chloride, calcium chloride, calcium magnesium acetate, potassium acetate, potassium formate, and corn or beet-based deicer solution. Liquid deicers are commonly used for pre-wetting road salt, sand or other solid deicers, or mixed with salt brine as liquid deicer. Although manufacturers provide performance data under specific conditions, a standardized test is very much needed. Samples of sodium chloride, magnesium chloride, calcium chloride, potassium acetate, and beet juice-based chemical deicers were selected for performance evaluation. The SHRP Ice-Melting Capacity Test has been used in many research projects, but the results do not always correlate well …

Real-World Performance Of Longitudinal Barriers Struck By Large Trucks, Doug Gabauer

Faculty Journal Articles

Outside of relatively limited crash testing with large trucks, very little is known regarding the performance of traffic barriers subjected to real-world large truck impacts. The purpose of this study was to investigate real-world large truck impacts into traffic barriers to determine barrier crash involvement rates, the impact performance of barriers not specifically designed to redirect large trucks, and the real-world performance of large-truck-specific barriers. Data sources included the Fatality Analysis Reporting System (2000-2009), the General Estimates System (2000-2009) and 155 in-depth large truck-to-barrier crashes from the Large Truck Crash Causation Study. Large truck impacts with a longitudinal barrier were …

Strengthening Of Reinforced Concrete Beams Pre-Damaged In Shear, Yousef Mohammed Bachar Chekfeh

Theses

Repair and strengthening of existing reinforced concrete (RC) structures has increased drastically in recent years. Shear reinforcement in RC beams is typically of a small bar diameter, and hence any shear-damage would result in a severe safety hazard and a catastrophic mode of failure especially under extreme loading events. The present work was initiated to the effectiveness of different composite strengthening systems; namely externally bonded carbon fiber reinforced polymer (EB-CFRP), and near surface mounted glass fiber reinforced polymer (NSM-GFRP) to prolong the functional service life of RC beams pre-damaged in shear. It comprised experimental testing and analytical investigation.

The experimental …

Las Vegas Strip Odor Remediation, Francell R. Rodriguez, Daniel Hoskins, Guadalupe Gutierrez

Calvert Undergraduate Research Awards

The project described in our report looks at four alternatives to eliminate odor from the intersection of Las Vegas Blvd and Flamingo Rd: biofiltration, Granulated Activated Carbon (GAC) filtration, nitrate addition and the alternative of doing nothing. The odor is caused mainly by hydrogen sulfide, which escapes from the sewer system in this area. Each alternative was evaluated based on effectiveness, land usage, energy consumption, water and material usage, and cost. Cost was further broken down into initial costs and annual costs, and then a cash flow analysis was performed to evaluate the cost over a 30 year timeframe.

Nitrate …

Failure Analysis Of Impact-Damaged Metallic Poles Repaired With Fiber Reinforced Polymer Composites, Robert Arthur Slade

Electronic Theses and Dissertations

Metallic utility poles, light poles, and mast arms are intermittently damaged by vehicle collision. In many cases the vehicular impact does not cause immediate failure of the structure, but induces localized damage that may result in failure under extreme service loadings or can promote degradation and corrosion within the damaged region. Replacement of these poles is costly and often involves prolonged lane closures, service interruption, and temporary loss of functionality. Therefore, an in situ repair of these structures is required. This thesis examines the failure modes of damaged metallic poles reinforced with externally-bonded fiber reinforced polymer (FRP) composites. Several FRP …

The Repair Of Laterally Damaged Concrete Bridge Girders Using Carbon Fiber Reinforcing Polymers (Cfrp), Matthew Kent Graeff

UNF Graduate Theses and Dissertations

In recent years the use of carbon fiber reinforcing polymers (CFRP) to repair damaged structural components has become more accepted and practiced. However, the current reference for designing FRP systems to repair and strengthen reinforced concrete (RC) and prestressed concrete (PSC) girders has limitations. Similarly, very few resources address solutions for the debonding problem associated with CFRP laminates or the use of CFRP laminates to repair structural members with pre-existing damage. The included experimental program consists of testing both RC and PSC girders with simulated lateral damage and CFRP repairs. A total of 34 RC beams were statically tested under …

Shear & Torsion Behaviour Of Hollow-Core Pre-Stressed Concrete Slabs, Cian Twomey

Theses

Research Aim The aim of this study is to carry out research on shear and torsion behaviour of hollow-core slabs.

Research Objectives The objectives of the research are: • carry out a review of research literature published to date • carry out physical laboratory testing • generate and calibrate Unite element models • expand finite element models to model shear and torsion behaviour of hollow- core slabs • carry out a comparison and discussion of the findings

Estimation Of The Impact Of Single Airport And Multi-Airport System Delay On The National Airspace System Using Multivariate Simultaneous Models, Nagesh Nayak

USF Tampa Graduate Theses and Dissertations

Airline delays lead to a tremendous loss of time and resources and cost billions of dollars every year in the United States (U.S.). At certain times, individual airports become bottlenecks within the National Airspace System (NAS). To explore solutions for reducing the delay, it is essential to understand factors causing flight delay and its impact on airports in the NAS. Major causal factors of flight delay at airports include over-scheduling, en-route convective weather, reduced ceiling and visibility around airports, and upstream delay propagation. Delay at one airport can be passed on to other airports in the NAS, in another word, …

On The Development Of The Extradosed Bridge Concept, Steven Lynn Stroh

USF Tampa Graduate Theses and Dissertations

The Extradosed Prestressed Bridge represents a relatively new bridge type. The first of this type bridge was constructed in Japan in 1994, and Japan has since built at least 29 examples of this bridge type. Throughout the rest of the world, another 34 of this bridge type have been built, with most countries having only one, or at most a few, examples. A broader application of this bridge type has been hampered by lack of design information and in particular lack design criteria for the stay cables. The purpose of this dissertation is to progress the understanding and application of …

Corrosion Evaluation And Durability Estimation Of Aluminized Steel Drainage Pipes, Mersedeh Akhoondan

USF Tampa Graduate Theses and Dissertations

Aluminized steel pipes are expected to have a long service life, e.g. 75 years. Spiral ribbed aluminized pipes (SRAP) have been widely specified and used by the Florida Department of Transportation (FDOT) for drainage of runoff water. Confidence in the long term durability of SRAP has been challenged by recent unexpected early corrosion failures in various Florida locations. SRAP premature corrosion incidents have occurred in two modalities. Mode A has taken place in near-neutral soil environments and has often been associated with either gross manufacturing defects (i.e. helical cuts) or corrosion concentration at or near the ribs. Mode B took …

Optimization Of An Advanced Water Treatment Plant: Bromate Control And Biofiltration Improvement, Dustin William Bales

USF Tampa Graduate Theses and Dissertations

The David L. Tippin Water Treatment Facility (DLTWTF) serving the city of Tampa, Florida is an advanced drinking water treatment facility consisting of coagulation/flocculation, ozonation, granular activated carbon biofiltration, and disinfection by chloramine. New regulations and the recent economic crisis pushed the facility to investigate methods to decrease costs and meet regulatory requirements easier.

The two major issues identified as priorities for investigation were the optimization of the biofiltration system and the use of a novel process to reduce the formation of bromate during ozonation.

Optimization of the biofiltration system is needed to remove more of the assorted particles that …

Numerical Simulation Of Sliding Friction And Wet Traction Force On A Smooth Tire Sliding On A Random Rough Pavement, Janaka Vishwanath Kosgolla

USF Tampa Graduate Theses and Dissertations

Availability of analytical and numerical tools that can provide reliable and accurate estimates of wet frictional resistance in different pavements would preclude the need for time consuming field tests. Therefore, many research efforts have been made to develop such tire-pavement friction predictive tools that are invaluable for friction management programs. However, due to the complexity of the problem, most existing tools have been developed based on several simplifying assumptions and without field verification of their predictions. The current study is focused on the evaluation of two specific prediction methods that can be used to predict friction on a smooth tire …