Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Civil Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 5251 - 5280 of 11810

Full-Text Articles in Engineering

Effect Of Pet Wrapping On Shear Performance Of Corroded Reinforced Concrete Columns, Dawei Zhang, Yuxi Zhao, Weiliang Jin, Tamon Ueda Jun 2016

Effect Of Pet Wrapping On Shear Performance Of Corroded Reinforced Concrete Columns, Dawei Zhang, Yuxi Zhao, Weiliang Jin, Tamon Ueda

International Conference on Durability of Concrete Structures

In this paper, an experimental study is presented on the influence of PET warping on shear performance, such as diagonal shear cracking load, peak load, and energy dissipation of RC columns with stirrup corrosion before strengthening. The experimental program involved an electrochemical process to accelerate the migration of chlorides from an external electrolyte into the tested columns, a wetting–drying cycle process with a controlled current to speed up the corrosion of the stirrup in the tested columns, the strengthening of corroded columns with PET warping, and a pseudostatic test to determine the shear capacity of the tested beams. The shear …

Go to article

Effect Of Cured Time On Creep Of Lightweight Aggregate Concrete, Hongzhi Cui, Haibin Yang, Xiaoxiao Xu, Zitao Lin, Tommy Yiu Lo Jun 2016

Effect Of Cured Time On Creep Of Lightweight Aggregate Concrete, Hongzhi Cui, Haibin Yang, Xiaoxiao Xu, Zitao Lin, Tommy Yiu Lo

International Conference on Durability of Concrete Structures

Creep and shrinkage are such properties that will occur in concrete when they are under load and exposed to surrounding. Since this property will cause deformation which may decrease the design strength of the concrete, it is necessary to do have more knowledge on this phenomenon. So, we will study the effect of creep on 7 and 14 days of cured time of specimens which sealed or unsealed will be considered, respectively. The specimens have shown how the concrete strains when they are under sustained load with time. Besides, the sealed specimens have shown how the basic creep is different …

Go to article

Application Of Raman Spectroscopy For Tracing The Status Of Silica Fume In Cementitious Materials, Yanfei Yue, Yun Bai, Jing Jing Wang Jun 2016

Application Of Raman Spectroscopy For Tracing The Status Of Silica Fume In Cementitious Materials, Yanfei Yue, Yun Bai, Jing Jing Wang

International Conference on Durability of Concrete Structures

Silica fume (SF) is an important component for manufacturing high performance concrete (HPC), owing to its superb pozzolanic reactivity and physical filling effects. However, application of SF in concrete may cause potential hazards issues. Although using SF in slurry form can somehow reduce the potential biotoxicity, the long-term stability and status of the SF particles within cementitious materials is still uncertain. In the current study, attempts were made to use Raman spectroscopy as an innovative alternative technique for tracing and identifying the status of SF both in its original SF slurry and in a 6-month-old hydrated cement paste. Light-optical microscope …

Go to article

Delayed Ettringite Formation In Fly Ash Concrete Under Moist Curing Conditions, Zhuqing Yu, Jian Ma, Hu Shi, Xiaodong Shen, Guang Ye Jun 2016

Delayed Ettringite Formation In Fly Ash Concrete Under Moist Curing Conditions, Zhuqing Yu, Jian Ma, Hu Shi, Xiaodong Shen, Guang Ye

International Conference on Durability of Concrete Structures

During the hydration of cement, tricalcium aluminate (C3A) reacts with gypsum and forms ettringite (AFt). Once all gypsum is consumed, ettringite can further react with remaining C3A and form monosulfate (AFm) at 1–2 days. Normally, at early ages, ettringite all transfers to AFm phase. After several months or years, ettringite can form again if a new source of sulfate becomes available in the pore solution of the paste, viz. delayed ettringite formation. In previous study, it was found that delayed ettringite forms in Portland cement concrete when the concrete samples were cured under moist conditions, …

Go to article

Study On The Disposition Of Water In Fly Ash-Based Geopolymers Using Atr–Ir, Jian Liu, Yuan Fang, Obada Kayali Jun 2016

Study On The Disposition Of Water In Fly Ash-Based Geopolymers Using Atr–Ir, Jian Liu, Yuan Fang, Obada Kayali

International Conference on Durability of Concrete Structures

This paper addresses the question of whether the main product of low calcium fly ash-based geopolymer is a hydrate, namely, sodium aluminosilicate hydrate (N-A-S-H). The answer to this question is important for understanding geopolymer characteristics. One of these is its fire resistance. In this study, fly ash-based geopolymers were synthesized using the combination of Na2CO3 and Ca(OH)2. Samples were cured at ambient temperature for 7 days, then placed in the oven at 105°C for 24 h, and then calcined at 1050°C for 48 h. IR was used to examine the produced geopolymers at each stage …

Go to article

Micromechanical Modeling For Material Design Of Durable Infrastructural Materials: The Influence Of Aggregate And Matrix Modification On Elastic Behavior Of Mortars, Sumanta Das, Amit Maroli, Narayanan Neithalath Jun 2016

Micromechanical Modeling For Material Design Of Durable Infrastructural Materials: The Influence Of Aggregate And Matrix Modification On Elastic Behavior Of Mortars, Sumanta Das, Amit Maroli, Narayanan Neithalath

International Conference on Durability of Concrete Structures

This paper reports the fundamental difference in microstress distributions in traditional hardened cement paste with quartz inclusions and a cement paste with lightweight aggregate (LWA) inclusions using microstructurebased numerical simulation involving finite element method with periodic boundary conditions. Variation of relative stress distributions under varying component material properties and varying microstructural features in both the systems is elucidated for a comprehensive understanding. The presented microstructure-based numerical technique accurately captures the stress concentrations inside microheterogeneous systems, which is otherwise not detectible using analytical homogenization schemes. Numerical simulations reveal that strengthening and stiffening of matrix and interfacial transition zone (ITZ) with silica …

Go to article

Research On Concrete Durability Improving For Existing Island-Building And Its Application, Mao Jianghong, Zhu Yaofeng, Xu Fangyuan, Jin Weiliang, Xu Yidong, Chen Xu Jun 2016

Research On Concrete Durability Improving For Existing Island-Building And Its Application, Mao Jianghong, Zhu Yaofeng, Xu Fangyuan, Jin Weiliang, Xu Yidong, Chen Xu

International Conference on Durability of Concrete Structures

China’s coastal cities contain a large number of islands with abundant human activities, in which buildings are in a typical marine corrosion environment and the corrosion of reinforced concrete structures is very prominent. This paper makes research work on two aspects: (1) the durability assessment and durability improvement after a thorough investigation of the architecture of Xiangtan County, Ningbo city, on an island and (2) the application research of the bidirectional electromigration rehabilitation (BIEM) technology to enhance the durability of existing island building life. This paper designs a set of BIEM equipment based on solar power supply and develops a …

Go to article

Chloride Penetration In Surface-Treated Concrete In Natural And Accelerated Environments, Jianfeng Dong, Yuxi Zhao, Shaoliang Pu, Ming Ji Jun 2016

Chloride Penetration In Surface-Treated Concrete In Natural And Accelerated Environments, Jianfeng Dong, Yuxi Zhao, Shaoliang Pu, Ming Ji

International Conference on Durability of Concrete Structures

This study investigated the chloride penetration of surface-treated concrete in natural and accelerated environments. A part of a real concrete port, including the beams and the columns, was investigated. Concrete specimens cast together with the concrete port were transported to the lab and subjected to wetting and drying cycles for accelerating the ingression of chloride ion. Chloride concentration of the specimens in the lab and the components in situ was tested. The results show that the surface treatments obviously slow down the chloride penetration into the concrete in both lab and in situ. The chloride penetration in situ is …

Go to article

Hierarchical Life-Cycle Design Of Concrete Structures, Zhujun Wang, Jin Weiliang, Ju Chen Jun 2016

Hierarchical Life-Cycle Design Of Concrete Structures, Zhujun Wang, Jin Weiliang, Ju Chen

International Conference on Durability of Concrete Structures

Concrete structures’ service life lasts decades. In order to deal with all the probable degradations and deteriorations in the whole life span, the concept of concrete structures’ Life-Cycle Design was introduced into China in the 1980s. However, until this day, Life-Cycle Design is still more of a concept to most structure designers and engineers, rather than a practical method. This paper provides a hierarchical method for concrete structures’ Life-Cycle Design, in which the design process is divided into five levels. Safety should be the fundamental requirements for all concrete structures, so as to guarantee a reliable quality. For structures located …

Go to article

Study Of Water Permeability Of Lightweight Concrete, Xiaoxiao Xu, Haibin Yang, Hongzhi Cui, Zitao Lin, Tommy Yiu Lo Jun 2016

Study Of Water Permeability Of Lightweight Concrete, Xiaoxiao Xu, Haibin Yang, Hongzhi Cui, Zitao Lin, Tommy Yiu Lo

International Conference on Durability of Concrete Structures

The relationship between water permeability and different levels of the tested layers from the top surface to the bottom surface of the lightweight concrete specimens is determined in this study. It is beneficial to develop the design criteria for a durable lightweight concrete. The water permeability coefficient K of the samples was determined by water permeability test using GWT. It is found that the water permeability coefficient K of the three layers in each set of samples tends to decrease as the level of the tested from the top surface increase. Larger Rebound Number and higher density in the bottom …

Go to article

Influence Of Sio2@Pmhs On The Water Absorption Of Cement Mortar As A Surface Treatment Agent, Ran Li, Pengkun Hou, Zonghui Zhou, Xin Cheng Jun 2016

Influence Of Sio2@Pmhs On The Water Absorption Of Cement Mortar As A Surface Treatment Agent, Ran Li, Pengkun Hou, Zonghui Zhou, Xin Cheng

International Conference on Durability of Concrete Structures

In this paper, the core–shell structured SiO2@PMHS hybrid nanoparticles were synthesized with tetraethoxysilane (TEOS) and polymethylhydrosiloxane (PMHS). And SiO2@PMHS core–shell nanoparticles were first used as a surface treatment agent for cement-based materials. The influence of SiO2@PMHS nanoparticles on the water absorption of hardened cement mortar with water-to-cement ratio of 0.6 was investigated. Results showed that the water absorption of cement mortar treated with SiO2@PMHS nanoparticles was decreased by 93.47% in comparison to the control sample.

Go to article

Edge Detection Of Concrete Mesostructure Based On Dis Operator, Bin Feng, Zicheng Xu, Jin Xia, Shijie Jin, Weiliang Jin Jun 2016

Edge Detection Of Concrete Mesostructure Based On Dis Operator, Bin Feng, Zicheng Xu, Jin Xia, Shijie Jin, Weiliang Jin

International Conference on Durability of Concrete Structures

Aggregate edge detection is the basis of creating concrete mesoscale model, which is applied to analyze concrete mesoscale characteristics. A concrete digital image edge detection method using DIS operator is presented in this paper. Mean filter, multi-scale filter, and Gaussian filter are compared on the effect of concrete image noise reduction. Based on the result, Gaussian filter is the most optimum method to reduce image noise and remain aggregate edge distinct. Sobel operator, Laplacian operator, and DIS operator are applied respectively to detect the aggregate edge on Gaussian filter processed images. Based on the experiment, DIS operator outperforms other two …

Go to article

Influence Of The Surface Treatment Of Hardened Cement Mortar With Colloidal Nano-Silica And Teos, Pengkun Hou, Xin Cheng, Zonghui Zhou Jun 2016

Influence Of The Surface Treatment Of Hardened Cement Mortar With Colloidal Nano-Silica And Teos, Pengkun Hou, Xin Cheng, Zonghui Zhou

International Conference on Durability of Concrete Structures

Two types of silicate material, tetraethoxysilane (TEOS) and colloidal nanoSiO2 (CNS), were applied for surface treatment of hardened cement mortar by exploring their filling and pozzolanic reactivity to make the surface compacter. Results showed that the water adsorption coefficient, the water vapor transmission rate, and the water penetration depth were reduced when CNS and TEOS were applied onto the surface of hardened cement mortar, and TEOS exhibits a superior effect on surface treatment, making the mass-transport rate and extent smaller than CNS does.

Go to article

Performance Of Concrete Patch Repairs: From A Durability Point Of View, Choorackal Avirachan Eldho, Ominda Nanayakkar, Jun Xia, Steve Jones Jun 2016

Performance Of Concrete Patch Repairs: From A Durability Point Of View, Choorackal Avirachan Eldho, Ominda Nanayakkar, Jun Xia, Steve Jones

International Conference on Durability of Concrete Structures

Chloride contamination in reinforced concrete leads to the corrosion of steel bars. Concrete patch repairs are widely practiced as a remedial measure for the mitigation of such corrosion in reinforced concrete structures. The performance of the patch repairs was studied by various researchers in the past. The structural and material aspects of patch repairs have received more attention than the electrochemical consequences of patch repairs in past studies. But electrochemical changes could be the underlying cause for the failure of many patch repairs. This paper reviews the performance of patch repairs from a durability point of view. It covers the …

Go to article

Aggregate Shape Effect On Multicomponent Ionic Electromigration In Concrete, Qing-Feng Liu, Long-Yuan Li, Jian Yang Jun 2016

Aggregate Shape Effect On Multicomponent Ionic Electromigration In Concrete, Qing-Feng Liu, Long-Yuan Li, Jian Yang

International Conference on Durability of Concrete Structures

This paper presents a numerical study on the mechanism of chloride migration in concrete. Unlike most of existing work, this study utilises multicomponent ionic transport models to reflect the influence of ionic interactions by coupling both mass conservation and Poisson’s equations. A series of 2-D, 3-phase models with different shapes and volume fractions of aggregates are developed to simulate the chloride migration test. Through a comparatively overall numerical exploration that considers external voltage, ionic interactions, heterogeneous nature, ITZ, and ionic binding, some important features about multispecies coupling and aggregate shape effect, which have not been properly reported from existing concrete …

Go to article

Research On Chloride Penetration Resistance Of Hybrid Fiber Reinforced Self-Compacting Concrete, Wu-Jian Long, Zhe-Ming Mai, Jin-Guang Shi, Tian-Tian Zhao, Wu-Lei Peng Jun 2016

Research On Chloride Penetration Resistance Of Hybrid Fiber Reinforced Self-Compacting Concrete, Wu-Jian Long, Zhe-Ming Mai, Jin-Guang Shi, Tian-Tian Zhao, Wu-Lei Peng

International Conference on Durability of Concrete Structures

The properties of chloride penetration of hybrid fiber reinforced self-compacting concrete (SCC) were investigated in this study. The results show that, the chloride penetration resistance of concrete can be improved by single incorporation either carbon or cellulose fibers. The concrete chloride diffusion coefficient DRCM of 12-cm length carbon SCC with fiber content of 1.7 kg/m3, 2.72 kg/m3, and 3.4 kg/m3 decreases by 10.3%, 25.5%, and 18.2% compared to reference concrete without any fibers, respectively. Moreover, the concrete chloride diffusion coefficient DRCM of cellulose SCC with fiber content of 1.2 kg/m3, 1.6 …

Go to article

Moisture And Temperature Effects On Interface Mechanical Properties For External Bonding, Tamon Ueda, Justin Shrestha, Khuram Rashid, Dawei Zhang Jun 2016

Moisture And Temperature Effects On Interface Mechanical Properties For External Bonding, Tamon Ueda, Justin Shrestha, Khuram Rashid, Dawei Zhang

International Conference on Durability of Concrete Structures

In order to develop rational guidelines for strengthening by external bonding, it is necessary to clarify longterm performance of interfacial bonding property. In this paper, moisture effects on bonding properties at FRP–concrete interface and temperature/moisture effects on bonding properties at PCM–concrete interface are presented. Shear bond strength of FRP–concrete interface is affected by moisture because resin–concrete adhesion strength is affected by moisture. Among tested CFRP external bonding systems, wet-layup CFRP systems all show the strength reduction, while prefabricated CFRP systems all show the strength increase after immersion. The bond stress–slip relationship and interfacial fracture energy also change, which can explain …

Go to article

Mat-701: Predicting The Compressive Strength Of Ultra-Lightweight Concrete By An Artificial Neural Network, Jordan Ouellet, Jean-Luc Martel, Claudiane Ouellet-Plamondon, Alan Carter Jun 2016

Mat-701: Predicting The Compressive Strength Of Ultra-Lightweight Concrete By An Artificial Neural Network, Jordan Ouellet, Jean-Luc Martel, Claudiane Ouellet-Plamondon, Alan Carter

Canadian Society for Civil Engineering

Ultra-lightweight concrete (ULWC) has potential applications for floating structures and architectural elements because of its dry density coming in at under 1000 kg/m3. The objective was to develop an artificial neural network (ANN) to aid the ULWC designer according to his needs. Boundary conditions were set for each material and 13 constraints based on the water binder ratio, density, air content, binder and aggregate content. The ANN predicted the compressive strength with a comfortable margin of error, with the gap encountered being attributed to variability in workability. Precise constraints and boundary conditions are needed to ensure a lower variability in …

Go to article

Mat-702: Mechanical Behaviour Of Ultra-High Performance Concrete Obtained With Different Concrete Constituents And Mix Designs, Mahmoud Sayed-Ahmed, Khaled Sennah, Moulay Youssef Monsif Jun 2016

Mat-702: Mechanical Behaviour Of Ultra-High Performance Concrete Obtained With Different Concrete Constituents And Mix Designs, Mahmoud Sayed-Ahmed, Khaled Sennah, Moulay Youssef Monsif

Canadian Society for Civil Engineering

This research investigates the mechanical behaviour for the Ultra-High Performance Concrete (UHPC) and UltraHigh Performance Fiber Reinforced Concrete (UHPFRC). UHPC and UHPFRC are designed to be self-consolidated concrete that level itself without mechanical vibration due to its highly flowability and moderate viscosity. UHPFRC is used as joint-fill cementitious materials for the connections of prefabricated bride elements and systems used for the Accelerated Bridge Construction and rapid bridge replacement. The main concrete constituents of such materials consist from: binders (cement), powders (fillers), liquids (additives), water, and fibers. Hence, the mixture proportion design should follow a densified mixture design algorithm to densify …

Go to article

Mat-704: Resistance Of Concrete Incorporating Portland Limestone Cement To Sulfuric Acid, Mahmud Amin, Mohamed T. Bassuoni Jun 2016

Mat-704: Resistance Of Concrete Incorporating Portland Limestone Cement To Sulfuric Acid, Mahmud Amin, Mohamed T. Bassuoni

Canadian Society for Civil Engineering

Concrete has long been the most popular choice for constructing key infrastructural elements such as sewer pipes, water treatment facilities, industrial floors and foundations. However, many field cases from all around the world have shown that concrete elements in these environments are severely damaged due to biogenic and/or chemical sulfuric acid attack. Since high alkalinity is required for the stability of the cementitious matrix, concrete is highly prone to acid attacks, which decalcify and disintegrate the hydrated cement paste to various levels based on exposure conditions and type of concrete. Numerous studies have been conducted to enhance the durability of …

Go to article

Mat-705: Improving The Efficiency Of Zinc Sacrificial Anodes In Repaired Concrete, Ahmed G. Bediwy, Mohamed T. Bassuoni, Martin Beaudette Jun 2016

Mat-705: Improving The Efficiency Of Zinc Sacrificial Anodes In Repaired Concrete, Ahmed G. Bediwy, Mohamed T. Bassuoni, Martin Beaudette

Canadian Society for Civil Engineering

Zinc sacrificial anodes are considered an effective and economical method to prevent the electrochemical corrosion of steel bars by providing cathodic current to bars, which can provide corrosion protection at low galvanic current densities in the range of 0.2 to 2 mA/m2. Sacrificial anodes are commonly used in RC structures particularly in bridge decks to mitigate a critical phenomenon that occurs in the original concrete beside the repaired patches, which is known as the ‘halo effect’. One of the key factors affecting the efficacy of zinc anodes is the resistivity of concrete or cementitious repair material in which these anodes …

Go to article

Mat-707: Development Of Enhanced Test Methods To Evaluate Alkali-Silica Reaction In Concrete, Noura Sinno, Medhat Shehata Jun 2016

Mat-707: Development Of Enhanced Test Methods To Evaluate Alkali-Silica Reaction In Concrete, Noura Sinno, Medhat Shehata

Canadian Society for Civil Engineering

The research presented in this paper studies the effect of sample geometry and temperature on expansion due to alkali-silica reaction (ASR) in concrete. Expansions of cubes and cylinders are compared to those of the standard prisms. Control samples, samples with fly ash (FA) and others with slag are investigated at two temperatures, 38°C and 60°C. At 38°C, results showed that smaller samples have higher expansion at early ages. However, larger samples such as cubes and cylinders seem to reach higher expansion compared to prisms after 32 weeks for both control and samples with fly ash. In addition, the results showed …

Go to article

Mat-708: Monitoring The Corrosion Process Of Reinforced Concrete Flat Slab-Column Connection, Mahmoud E. Said, Amgad Hussein, Assem A. A. Hassan Jun 2016

Mat-708: Monitoring The Corrosion Process Of Reinforced Concrete Flat Slab-Column Connection, Mahmoud E. Said, Amgad Hussein, Assem A. A. Hassan

Canadian Society for Civil Engineering

The corrosion of the steel reinforcement embedded in a two-way reinforced concrete flat slab around the column stub area was investigated in this study, which aimed to studying the effect of corrosion on the shear punching behavior. Two square flat slab-column connections were cast, the flat slab dimension was 1900 mm × 1900 mm × 150 mm, and the column dimensions was 250 mm × 250 mm. A specific delaminated area was corroded around the column stub to emphasize the effect of corrosion around punching area. The corrosion reached two levels of mass loss uniformly over that specified area: 0% …

Go to article

Mat-711: Utilization Of Recycled Crumb Rubber In Structural Self-Consolidating Concrete, Mohamed K. Ismail, Assem A. A. Hassan, Madolyn A. Lundrigan Jun 2016

Mat-711: Utilization Of Recycled Crumb Rubber In Structural Self-Consolidating Concrete, Mohamed K. Ismail, Assem A. A. Hassan, Madolyn A. Lundrigan

Canadian Society for Civil Engineering

The present work evaluates the impact of using recycled crumb rubber (CR) as a partial replacement of fine aggregate on the fresh and mechanical properties of concrete composite, especially when self-consolidating concrete is used. In this study, seven mixtures containing various amounts of fine CR (0-30% by volume of sand) were tested. The fresh properties tests included flowability, passing ability, and segregation resistance. On the other hand, the mechanical properties tests included compressive strength, modulus of elasticity, splitting tensile strength, and flexural strength. The results indicated that although increasing the CR replacement decreased the fresh and mechanical properties of concrete, …

Go to article

Mat-712: Microstructural Investigations On The Self-Healing Ability Of Engineered Cementitious Composites Incorporating Different Mineral Admixtures, Ahmed Alyousif, Khandaker M. Anwar Hossain, Mohamed Lachemi, Mustafa Sahmaran Jun 2016

Mat-712: Microstructural Investigations On The Self-Healing Ability Of Engineered Cementitious Composites Incorporating Different Mineral Admixtures, Ahmed Alyousif, Khandaker M. Anwar Hossain, Mohamed Lachemi, Mustafa Sahmaran

Canadian Society for Civil Engineering

The present study investigates the impacts that self-healing has on the microstructure characteristics of microcracked Engineered Cementitious Composites (ECC). These have two contrasting maturity levels and, furthermore, they involve three varying mineral admixtures that have very different chemical constituents. The impact of self-healing on the transport characteristics was examined by employing rapid chloride permeability tests (RCPT). The findings indicated that, if the appropriate mineral admixture type and conditioning were chosen, it would be possible to enhance the majority of the chloride ion penetrability levels following a 30-day period of water curing. As a result, the majority of the findings were …

Go to article

Mat-713: Evaluation Of Ndt Techniques For Concrete Bridge Decks Using Fuzzy Analytical Hierarchy Process, Tarek Omar, Moncef L. Nehdi Jun 2016

Mat-713: Evaluation Of Ndt Techniques For Concrete Bridge Decks Using Fuzzy Analytical Hierarchy Process, Tarek Omar, Moncef L. Nehdi

Canadian Society for Civil Engineering

Considering the colossal backlog of deteriorating bridges, transportation agencies need to systematically evaluate bridge deck conditions in order to optimize the timing, scope, and approach of preventive maintenance, repair, and replacement. Over the last few years, there have been growing interest among bridge infrastructure stakeholders in using non-destructive methodologies for bridge inspection, evaluation, and maintenance. Nondestructive testing (NDT) techniques can provide needed information about the “under-the-surface” deteriorated condition of bridge decks. This paper examines the most common NDT technologies for assessing bridge decks. Each technology was rated based on five performance measures: capability to detect subsurface defects, speed of data …

Go to article

Mat-714: Condition Assessment And Deterioration Prediction Tools For Concrete Bridges: A New Look, Tarek Omar, Moncef L. Nehdi Jun 2016

Mat-714: Condition Assessment And Deterioration Prediction Tools For Concrete Bridges: A New Look, Tarek Omar, Moncef L. Nehdi

Canadian Society for Civil Engineering

Structural problems created by corrosion, ageing, aggressive environments, material defects and unforeseen mechanical or seismic loads can compromise the serviceability and safety of bridges. The importance of an effective bridge-management system (BMS) cannot be overstated, especially in light of the recent collapse of bridges in North America and elsewhere. Several technologies are available for assessing the condition of concrete bridges and a number of deterioration models are used to predict future bridge conditions and estimate associated funding requirements. This paper critically reviews the different available condition assessment and deterioration prediction approaches for concrete bridges. The potential applications of condition assessment …

Go to article

Mat-716: Green Sidewalks Using Sustainable Two-Stage Concrete, Manal F. Najjar, Ahmed M. Soliman, Tareq M. Azabi, Moncef L. Nehdi Jun 2016

Mat-716: Green Sidewalks Using Sustainable Two-Stage Concrete, Manal F. Najjar, Ahmed M. Soliman, Tareq M. Azabi, Moncef L. Nehdi

Canadian Society for Civil Engineering

Two-stage concrete (TSC) is a special type of concrete, which has a high potential for use in sidewalk construction owing to its high volume stability. TSC is characterized by its high coarse aggregate content. Hence, using recycled solid waste materials as a coarse aggregate will increase TSC sustainability, while providing a cost-effective alternative to natural aggregates. Aggregates are pre-placed in TSC. Hence, water absorption by recycled concrete aggregates and the associated rheology problems do not exist in TSC. This study explores the performance of green TSC sidewalks incorporating recycled concrete aggregates (RCA) and crumb rubber from scrap tires. Mechanical properties …

Go to article

Mat-719: Investigation Of Grouted Precast Concrete Wall Connections At Subfreezing Conditions, Douglas James Provost-Smith, Mohamed Elsayed, Moncef L. Nehdi Jun 2016

Mat-719: Investigation Of Grouted Precast Concrete Wall Connections At Subfreezing Conditions, Douglas James Provost-Smith, Mohamed Elsayed, Moncef L. Nehdi

Canadian Society for Civil Engineering

The effect of exposing grouted precast wall connections to subfreezing curing temperatures at early-age was explored in this study. In cold weather construction, heating of the surrounding environment of grouted precast wall connections is usually conducted for short periods of time. Hence, subfreezing conditions can affect the strength of the grout and the bond strength of the connection, which can ultimately compromise the integrity of the structure. In this study, grout specimens typical of that used in precast wall construction were cured at ambient conditions for one day, and then placed in an environmental chamber at subfreezing temperatures (-10°C and …

Go to article

Mat-720: Effect Of Pore Structure On Concrete Deterioration By Physical Sulphate Attack, Ahmed R. Suleiman, Moncef L. Nehdi Jun 2016

Mat-720: Effect Of Pore Structure On Concrete Deterioration By Physical Sulphate Attack, Ahmed R. Suleiman, Moncef L. Nehdi

Canadian Society for Civil Engineering

Repeated crystallisation of salt minerals has been considered as the driving force for surface scaling of concrete exposed to physical sulphate attack. This damage is initiated when stresses induced by the internal pressure created via repeated salt crystallisation exceed the tensile strength of the concrete. The degree of such damage will depend mainly on the structure and connectivity of pores, which control the penetration of sulphates into the concrete. Several factors affect the pore structure including the concrete constituents, mixture proportions and the curing process. Therefore, in this paper, the effect of the pore structure on concrete deterioration by physical …

Go to article

First Prev Next Last