Engineering Commons^™

Multistage Sonication Effect On The Composition And Properties Of Degraded Chitosan Product, Nurul Laili Arifin, Emma Savitri, Anjar Indah, Fesa Putra, Sumarno Sumarno

Makara Journal of Technology

The sonication method randomly breaks polymer chains to produce a varied distribution of products. A scheme with multi-stage sonication steps is proposed to identify oligomers and low molecular weight chitosan based on changes to the degrad-ed product. For each sonication level, 1% (w/v) chitosan in 1% (v/v) aqueous acetic acid was sonicated for 120 min at 60 °C. The products of the sonication treatment were deprotonized by adding an alkali solution, freeze dried and insoluble product re-sonicated until a low molecular weight was produced. Low molecular weight chitosan/insoluble products were character-ized with Fourier-transform infrared spectra (FT-IR) and X-ray diffraction (XRD) …

Data Fusion Method Based On Adaptive Kalman Filtering, Bernadus Herdi Sirenden

Makara Journal of Technology

This paper discusses data fusion methods to combine the data from a rotary encoder and ultrasonic sensor. Both sensors are used in a micro-flow calibration system developed by the Research Center of Metrology LIPI. The methods studied are hierarchical data fusion and Kalman filtering. Three types of Kalman filters (KFs) are compared: the conventional Kalman filter and two adaptive Kalman filters. Moreover, a method to combine the uncertainty results from KF in hierarchical data fusion is proposed. The aim of this study is to find appropriate methods of data fusion that can be implemented in micro-flow calibration systems. Data from …

Study Of Zno Nanospheres Fabricated Via Thermal Evaporation For Solar Cell Application, Fatin Farisha Alia Azmi, Bouchta Sahraoui, Saifful Kamaluddin Muzakir

Makara Journal of Technology

A solar cell is a device that absorbs light energy to generate electrical energy. A typical example of a solar cell is the quantum dot solar cell (QDSC), which consists of three main components: (i) fluorophore: the component that absorbs light and generates excited state electrons and holes, (ii) photoelectrode: the component that transports the excited state electron and prevents recombination of excited state electrons and holes, and (iii) electrolyte: the component that re-plenishes the vacancy left by the excited electron in the hole. Despite the increasing number of research in the QDSC field, to date, a device with significant …

Sorption-Based Energy Storage Systems: A Review, Kyaw Thu, Nasruddin Nasruddin, Sourav Mitra, Bidyut Baran Saha

Makara Journal of Technology

Mismatched timing between the supply and demand of energy calls for reliable storage systems. Energy storage systems have become further significant with the widespread implementation of renewable energy. These systems can mitigate problems that are often associated with renewable energy sources such as supply unreliability while meeting the de-mand during peak hours. Energy can be stored in various forms, yet storage systems can be generally grouped based on their output forms, namely (i) electricity and (ii) heat or thermal energy. Electrical energy is the most convenient and effective form since it can power almost all modern devices. However, the electricity …

Electrical Properties Of A Novel Solid Biopolymer Electrolyte Based On Algi-Nate Incorporated With Citric Acid, Ahmad Faizrin Ahmad Fuzlin, Noor Syahida Ismail, Yuki Nagao, Ahmad Salihin Samsudin

Makara Journal of Technology

In the present study, a novel solid biopolymer electrolyte (SBE) system is introduced by doping citric acid into alginate polymer. A sample of the alginate-citric acid SBE system was prepared via a solution casting technique. Using electrical impedance spectroscopy (EIS), the electrolytes of alginate-citric acid analyzed from 5 Hz to 1 MHz achieved the highest conductivity at 20 wt.% of 5.49 × 10-7 S cm-1. The temperature dependence of various citric acid amounts obeyed the Arrhenius rule with R2~1, where all SBE systems were thermally activated with increasing temperature. The dielectric studies of the alginate-citric acid SBE system showed non-Debye …

Impacts Of Freight Consolidation And Truck Sharing On Freight Mobility, Tieming Liu, Chaoyue Zhao

Publications

The trucking industry is an important sector of the U.S. economy. However, it is quite fragmented, hindering the efficiency of cargo transportation and the ability for small carriers to identify demands to fill full truck loads. The focus of this research is to study models and algorithms in order to aid online freight marketplaces to identify efficient consolidation strategies. To accomplish this aim, a new mixed integer programming model for the pickup and delivery problem has been developed. The model is geared towards identifying effective freight consolidation opportunities. A branch-and-cut algorithm to solve the model was also developed. The model …

Development Of Models For Road-Rail Intermodal Freight Network Under Uncertainty, Md Majbah Uddin

Theses and Dissertations

Freight activities are directly related to a country’s Gross Domestic Product and economic viability. In recent years, the U.S. transportation system supports a growing volume of freight, and it is anticipated that this trend will continue in the coming years. To support the projected increase in freight volume, an efficient, reliable, and low-cost freight logistics system is necessary to keep the U.S. competitive in the global market. In addition, intermodal transport is becoming an increasingly attractive alternative to shippers, and this trend is likely to continue as state and federal agencies are considering policies to induce a freight modal shift …

Mechanisms Of Radium Adsorption On Silica And Barite, Hamid Hamid

Theses and Dissertations

The use of experimental studies with computer modeling is vital in the development of cost-effective methods for treating radium containing wastewaters. The goal of this dissertation is to develop a multi-scale model to study radium removal mechanisms onto silica and barite, and the effect of water quality parameters on radium removal. The major tasks to be accomplished in this study are: to develop a multi-component isotherm model for radium removal on different ionized silica surfaces; to re-parameterize sulphate force fields to account for metal-sulfate interactions; and to simulate radium removal on barite under different water quality conditions. We conducted molecular …

Using Theoretical And Experimental Particle Packing For Aggregate Gradation Optimization To Reduce Cement Content In Pavement Concrete Mixtures, Miras Mamirov

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The main objective of this study was to evaluate the effect of aggregate particle packing optimization and cement reduction on Nebraska slip-form pavement concrete performance. A literature review was conducted to examine different aggregate optimization tools, quality control tests, and historical data of Nebraska Department of Transportation (NDOT) mixtures. It was found that the Modified Toufar Model has good potential in optimizing particle packing and predicting packing degrees. The combined void content test was found to be useful to experimentally justify optimized aggregate gradations. Two specific pavement concrete workability tests, i.e., the Box Test and the VKelly Test, were used …

Simulation Of Antimicrobial Resistance Gene Fate In Narrow Grass Hedges, Marzieh Khedmati

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Vegetative Filter Strips (VFS) are used for controlling the volume of runoff and decreasing the contaminants in runoff before entering the water bodies. Many studies investigated the role of VFS in sediment and nutrient removal, but little is known about their efficiency in the removal of emerging contaminants such as antimicrobial resistance genes (ARGs). VFSMOD was used to simulate the efficiency of VFS in this regard. The objectives of this study were to calibrate the VFSMOD with some experimental data and asses the efficiency of the model in simulating the filter behavior in removing ARGs. The tests were conducted in …

Proportion And Evaluation Of Ultra-High Performance Concrete Using Local Materials, Flavia Ribeiro Furtado De Mendonca

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Ultra-high performance concrete (UHPC) is a new class of concrete that has superior workability, as well as mechanical and durability properties that far exceed those of conventional concrete. To achieve these properties, a very dense internal structure and the very low water-to-binder ratio (w/b) generally are necessary. While particle packing models are typically used to design UHPC, due to the complexity of the composition interaction and characteristics of UHPC, these models might not necessarily provide the best design, which leads to the need of experimental study to justify UHPC performance. The evaluation of the impact of various design parameters on …

Variable Speed Limit Control At Sag Curves Through Connected Vehicles: Implications Of Alternative Communications And Sensing Technologies, Reza Vatani Nezafat

Civil & Environmental Engineering Theses & Dissertations

Connected vehicles (CVs) will enable new applications to improve traffic flow. This study’s focus is to investigate how potential implementation of variable speed limit (VSL) through different types of communication and sensing technologies on CVs may improve traffic flow at a sag curve. At sag curves, the gradient changes from negative to positive values which causes a reduction in the roadway capacity and congestion. A VSL algorithm is developed and implemented in a simulation environment for controlling the inflow of vehicles to a sag curve on a freeway to minimize delays and increase throughput. Both vehicle-to-vehicle (V2V) and infrastructure-to-vehicle (I2V) …

Assessment And Correction Of Lidar-Derived Dems In The Coastal Marshes Of Louisiana, William M. Lauve

LSU Master's Theses

The onset of airborne light detection and ranging (lidar) has resulted in expansive, precise digital elevation models (DEMs). DEMs are essential for modeling complex systems, such as the coastal land margin of Louisiana. They are used for many applications (e.g. tide, storm surge, and ecological modeling) and by diverse groups (e.g. state and federal agencies, NGOs, and academia). However, in a marsh environment, it is difficult for airborne lidar to produce accurate bare-earth measurements and even accurate elevations are rarely verified by ground truth data. The accuracy of lidar in marshes is limited by the sensor’s resolution …

Modeling Of Fluid Injection For Hydraulic Fracturing Initiation In Porous Rock Formations, Krishna Adhikari

LSU Master's Theses

Hydraulic fracturing has been widely opted in recent times to simulate the unconventional reservoirs and thus, has become key a subject of interest in petroleum engineering. The stress concentration around the borehole affects the breakdown pressure and fracture reopening pressure during the hydraulic fracturing treatments. Thus, the state of stress around borehole wall and its surrounding rocks due to instantaneous drilling and a fluid injection at borehole surface needs to be determined accurately to initiate the hydraulic fractures. This research intends to derive the analytical stress solution of inclined borehole subjected to time-dependent fluid injection and in-situ stress, verify the …

Reliability-Based Shear Rating Of Prestressed Concrete Bridge Girders Considering Capacity Adjustment Factor, Alaa I. Chehab, Christopher D. Eamon

Civil and Environmental Engineering Faculty Research Publications

In this study, the reliability of prestressed concrete (PC) bridge girders in the shear rating process is quantified, where the use of a simple procedure to enhance the accuracy of shear capacity evaluation for rating is evaluated. It was found that the approximate methods used in code-based procedures to develop shear resistance used for reliability calibration of the AASHTO Bridge Design Specifications and the Manual for Bridge Evaluation result in larger discrepancies in reliability than previously assumed, as well as substantially conservative shear capacity evaluation in most cases. To examine the effects of using a more accurate shear rating process, …

Development Of Heavyweight Self-Compacting Concrete And Ambient-Cured Heavyweight Geopolymer Concrete Using Magnetite Aggregates, Afsaneh Valizadeh, Farhad Aslani, Zohaib Asif, Matt Roso

Research outputs 2014 to 2021

Heavyweight self-compacting concrete (HWSCC) and heavyweight geopolymer concrete (HWGC) are new types of concrete that integrate the advantages of heavyweight concrete (HWC) with self-compacting concrete (SCC) and geopolymer concrete (GC), respectively. The replacement of natural coarse aggregates with magnetite aggregates in control SCC and control GC at volume ratios of 50%, 75%, and 100% was considered in this study to obtain heavyweight concrete classifications, according to British standards, which provide proper protection from sources that emit harmful radiations in medical and nuclear industries and may also be used in many offshore structures. The main aim of this study is to …

Seepage-Coupled Finite Element Analysis Of Stress Driven Rock Slope Failures For Bothnatural And Induced Failures, Thomas Becket Anyintuo

USF Tampa Graduate Theses and Dissertations

Rock slope failures leading to rock falls and rock slides are caused by a multitude of factors, including seismic activity, weathering, frost wedging, groundwater and thermal stressing. Although these causes are generally attributed as separate causes, some of them will often act together to cause rock slope failures. In this work, two of the above factors, seepage of water through cracks and crack propagation due to the after effects of blasting are considered. Their combined impact on the development of rock falls and rock slides is modeled on ANSYS workbench using the Bingham Canyon mine slope failure of 2013 as …

The Quest For Model Uncertainty Quantification: A Hybrid Ensemble And Variational Data Assimilation Framework, Peyman Abbaszadeh, Hamid Moradkhani, Dacian Daescu

Civil and Environmental Engineering Faculty Publications and Presentations

This article presents a novel approach to couple a deterministic four‐dimensional variational (4DVAR) assimilation method with the particle filter (PF) ensemble data assimilation system, to produce a robust approach for dual‐state‐parameter estimation. In our proposed method, the Hybrid Ensemble and Variational Data Assimilation framework for Environmental systems (HEAVEN), we characterize the model structural uncertainty in addition to model parameter and input uncertainties. The sequential PF is formulated within the 4DVAR system to design a computationally efficient feedback mechanism throughout the assimilation period. In this framework, the 4DVAR optimization produces the maximum a posteriori estimate of state variables at the beginning …

Application Of Computational Tools To Spaghetti-Based Truss Bridge Design, Jin Xu, Jiliang Li, Nuri Zeytinoglu, Jinyuan Zhai

ASEE IL-IN Section Conference

Application of Computational Tools to Spaghetti-Based Truss Design

Statics and Strength of Materials are two foundational courses for Mechanical/Civil Engineering. In order to assist students in better understanding and applying concepts to a meaningful design task, SolidWorks and theoretical calculation were used for a spaghetti-bridge design contest with the constraints of given maximum weight and allowable support-material weight. As the first step of this iterative designing process, both extrude feature and structural member were introduced to model planar bridge trusses. Then SolidWorks’ Statics module was used to run FEA analysis of the structural performance in efforts to optimize the …

A Robust Decision Support Leader-Follower Framework For Design Of Contamination Warning System In Water Distribution Network, Mohammad S. Khorshidi, Mohammad Reza Nikoo, Elham Ebrahimi, Mojtaba Sadegh

Civil Engineering Faculty Publications and Presentations

In recent years, several models have been proposed to inoculate Water Distribution Systems (WDS) against impacts of accidental and/or intentional compromised water quality through optimal deployment of online monitoring sensors in the network, which is referred to as Contamination Warning Systems (CWS). Translating such modeling efforts to real-world practice is, however, a challenge as different involved parties may pursue conflicting goals and modeling-based recommendations may not justify all stakeholders’ criteria. It is, hence, pivotal to develop conflict resolution methodologies to support engagement of different stakeholders in securing a safe water distribution. The decision making structure for CWS design is often …

Coastal Louisiana Landscape And Hurricane Storm Surge Evolution 1850 - 2110, Christopher George Siverd

LSU Doctoral Dissertations

The hurricane storm surge analysis presented in this dissertation examines surge response to changes in the Louisiana coastal landscape and Gulf of Mexico water level from 1850 to 2110. Land to water (L:W) isopleths, lines depicting areas of constant land to water ratio along the modern Louisiana coast, are utilized in the development of a simplified storm surge model that closely reproduces the surge output of a state-of-the-art detailed model. Eleven comparable storm surge models are constructed with each featuring a representation of the Louisiana coastal landscape circa 1850, 1890, 1930, 1970, 1990, 2010, 2030, 2050, 2070, 2090 and 2110. …

Seismic Behavior Of Screen Grid Core Insulated Concrete Form Walls, Anwer Sabah Mohammed Mohammed

Dissertations and Theses

The use of the insulated concrete form (ICF) walls in residential buildings has increased over the past few decades. Much research has been conducted to evaluate the lateral strength of these walls by applying monotonic and cyclic loadings. In the current study, full-scale shake table experiments were employed to evaluate the in-plane behavior of four screen grid insulated concrete form (SGICF) walls. The first two wall specimens utilized dry fit insulated form blocks made from recycled expanded polystyrene granules that were bonded together with cement. When stacked, the cavities in the blocks formed a grid of cores that are evenly …

Evaluation Of Strand To Grout Bond In Post-Tensioned Tendons With Corrosion Inhibiting Penetrants, Kurt Kupselaitis

USF Tampa Graduate Theses and Dissertations

Post tensioning bridges is an efficient way of construction where segments of a bridge are strung together using small diameter high strength strands. The steel strands are passed through internal and/or external ducts within the concrete segments, jacked to high levels of stress, anchored using steel wedges, and then filled with a corrosion inhibiting filler. A cementitious material called grout has been widely used for over 50 years as this filler. The Federal Highway Administration design and construction manual provides recommendations in the properly filling techniques to ensure the tendons are full of grout. Despite the level of detail the …

Adsorption Of Organic Micropollutants Onto Biochar: A Review Of Relevant Kinetics, Mechanisms And Equilibrium, Yiran Tong, Patrick J. Mcnamara, Brooke K. Mayer

Civil and Environmental Engineering Faculty Research and Publications

As an alternative to activated carbon, biochar has been considered for removal of organic micropollutants from water and wastewater via adsorption. This review elaborates on the fundamental basis of adsorption kinetics, mechanisms, and equilibrium with respect to biochar-based adsorption of micropollutants. The objectives include: 1) linking biochar surface properties with adsorption abilities, 2) categorizing the kinetics of adsorption of aqueous-phase organic compounds onto biochar, 3) categorizing the molecular-scale interactions between organic micropollutants and biochar, and 4) reviewing existing quantitative methods for characterizing adsorption equilibrium of organic micropollutants from water onto an adsorbent surface. To fulfill these goals, the relationships among …

High Friction Surface Treatment Initiatives By Indot: Spec Development, Joseph Bruno

Purdue Road School

In-House Project Design, Special Provision Specification, and Initial Test Results—Highfriction surface treatment (HFST) has been proactively utilized as a cost-effective solution to reducing vehicle crashes at curves across the country. As an initiative, INDOT is currently installing HFST at 26 locations statewide, mainly horizontal curves with high crash rates. This session consists of two presentations to share the information on the development, expected benefits, project design, and initial test results based on the HFST at these locations.

Rough Roads Ahead!?, Sarah Reed, Brooke Thomas, Jim Hellmann

Purdue Road School

Have you ever found yourself in the public's cross-hairs when it is time to implement a few roadway improvements? Are you handicapped in your ability to describe the true value of community planning and economic development planning? Come hear from one dynamic trio with the ability to identify issues and opportunities that others might not see and work to uncover even more ways tin which we are better together.

Latex Modified Concrete - Very Early Strength, Bobby Steele

Purdue Road School

INDOT came out with specifications for a very early strength concrete to use on bridge deck overlays. This concrete is fast setting, which allows overlays to be performed over a weekend and benefits the traveling public with a short duration of traffic interference. Cure time to reach the strength requirement is 3 hours. E&B Paving performed the first application with the new spec on August 26, 2018. Many changes were also made to the INDOT Specification Section 722.

Safety Improvements At Horizontal Curves, Joseph Bruno

Purdue Road School

This presentation highlights the progress INDOT has made in improving safety at horizontal curves by upgrading the signing and delineation and by applying high friction surface treatments at some locations. We will also discuss the MUTCD (Manual on Uniform Traffic Control Devices) requirements for signing horizontal curves and the approaching (December 31, 2019) FHWA target date for compliance.

Microwave Self-Healing Technology As Airfield Porous Asphalt Friction Course Repair And Maintenance System, Amir Tabakovic, Declan O'Prey, Drew Mckenna, David Woodward

Research and Innovation - Articles

A problem increasingly faced by airport authorities is the maintenance of runways. Due to their large aircraft loadings associated with take-off and landing operations, runways experience surface deterioration. Poor quality runway surfaces cannot be tolerated in such an environment. Maintenance issues must be carried out to maximise safety and minimise the risk of aircraft damage. A recent development has been the introduction of self-healing technologies such as rejuvenator encapsulation, induction and microwave heating to address these issues. This paper summarises a laboratory investigation to determine the effectiveness of microwave self-healing for crack repair of Porous Friction Course (PFC) used for …

Safety Standards Must Be Met For Fire Fighting In Educational Workshops In Industrial Secondary Schools In The Arab Republic Of Egypt, Ibrahim Mahmoud Hassan, Wael Ahmed Rady, Walid Mahmoud El-Nahas

Emirates Journal for Engineering Research

The aim of the research is to establish safety standards for fire fighting within educational workshops in industrial secondary schools to determine the structural requirements for designing workshops in educational buildings and meet international standards. To achieve this a questionnaire was made and data collected for analysis and hypothesis testing using the statistical package of social Sciences (SPSS). Through the adoption of a number of different statistical methods and after conducting the analysis of research data and testing its hypotheses find a number of results, most importantly that the standards conform to international and local standards . The results also …