Engineering Commons^™

Using Hydrologic And Hydraulic Simulations To Predict Near-Term Effects Of Beaver Habitat Restoration On Flood Flows, Luke S. Stewart

Master's Theses

There is a growing need to predict the complex hydrologic and hydraulic effects of beaver-maintained wetlands. This study uses relatively simple inputs and a replicable methodology to predict flood flow impacts of beaver habitat restoration at the site design scale using the engineering industry’s customary hydrology and hydraulic modeling approach. This study focuses on Toro Creek, the primary drainage for a 15.2 square mile watershed on the California Central Coast.

A hydrologic model of Toro Creek watershed was developed in HEC-HMS to approximate saturated soil conditions typical of late-spring flooding events observed in the region. The hydrologic model was calibrated …

Statistical Time-History Response Of Mid-Story Isolated Structures In Linearized Elastic Conditions, Min Thit Khant

Master's Theses

This study presents a statistical analysis of the seismic demand of mid-story isolated structures in linearized elastic conditions. The assumed earthquake database consists of 228 ground motions recorded in California from earthquakes with magnitudes greater than 6. A three-degree-of-freedom modeling approach is adopted, and the seismic demands of the substructure, superstructure, and isolation system are determined for varying isolated mass and stiffness ratios. The seismic demand of mid-story isolated structures at the isolation level is expressed in terms of the response of an idealized isolated superstructure supposed to be on the ground, while the demands on the substructure and superstructure …

Evaluation Of The Effects Of Various Types Of Inert And Active Fillers On Asphalt Mixture Performance, Mohammad Hadizadeh Pirbasti

LSU Master's Theses

Abstract:

The performance of asphalt mixtures is significantly influenced by the type and characteristics of fillers used as a replacement for filler part of the aggregates’ batching. According to this research investigation the performance along with durability characteristics of asphalt mixtures are evaluated through different inert and active fillers. The fillers used include Fly Ash, Cement, steel slag powder, and additional filler. These fillers incorporate into two types of asphalt mix design of Stone Matrix Asphalt (SMA) and a surface mix. Fillers are categorized according to their reactive properties alongside their physical attributes leading to active fillers strengthening bond formation …

Airfield Pavement Management Framework Using Advanced Modeling Techniques, Heena Dhasmana, Marwa Hassan, Elise Mansour

Publications

Airport authorities constantly collect pavement condition data and utilize life-cycle cost analysis to select construction and maintenance alternatives. The current Federal Aviation Administration (FAA) Advisory Circular 150/5380-7B recommends using Pavement Condition Index (PCI) to assess airfield pavement condition for planning of Maintenance and Rehabilitation (M&R) treatments. However, structural and functional performance might not be fairly represented by solely one indicator, the PCI. The latter might mask the root cause of the pavement deterioration and lead to inadequate M&R recommendations. Furthermore, the regression nature of the existing airfield pavement assessment models is not adequate for establishing pavement performance prediction as a …

Ultimate Limit State Reliability-Based Approach Life Prediction Of An Existing Frame Structure Under Seismic Hazard In Indonesia, Wira Herucakra, Luh Putri Adnyani

Journal of Materials Exploration and Findings

Life assessment integrated with Structural Integrity Management (SIM) has been implemented in the oil and gas industry for the past decade to maintain the integrity and safety of an in-service structure used to support hydrocarbon exploration, production, and processing activity. Current structural life assessment, as ruled by the American Petroleum Institute (API), uses a fatigue-based approach for offshore structures subjected to wave loading. As the general principle of SIM is not limited to offshore structures, this study offers an alternative life assessment method for onshore structures, especially steel frame structures subjected to earthquake loads. Reliability analysis, combined with the effect …

Optimizing The Sustainability Of Asphalt Pavements Through Incorporating Crumb Rubber In High-Modulus Asphalt Concrete (Hmac) Mixtures In Louisiana, Heena Dhasmana, Marwa Hassan, Mohamed Abdelmageed

Publications

Asphalt mixtures are traditionally produced using the Superpave mix design method, which emphasizes volumetric properties; however, current research is shifting toward performance-based and sustainable approaches. Within this context, the French High Modulus Asphalt Concrete (HMAC) design focuses on achieving specific performance criteria for workability, stiffness, rutting resistance, and fatigue behavior, employing a hard binder with higher asphalt content and fewer air voids than Superpave mixes. In this study, HMAC mixtures were developed using crumb rubber and locally sourced Louisiana materials. Five HMAC mixes using PG 76-22 and PG 67-22 binders with 10% and 20% crumb rubber were prepared, along with …

Enhancing Water Supply Resilience & Sustainability: Potential Solutions To Address Water Scarcity In Bogotá, Colombia, Sophia Alvarez Wong

Master's Projects and Capstones

Municipal water utilities are in urgent need of adapting to the intensifying impacts of climate change and population growth—key drivers of urban water scarcity worldwide. In rapidly expanding cities like Bogota, Colombia, these pressures have contributed to a severe water crisis driven by prolonged droughts, ecosystem degradation, increasing water demands, and overdependence on limited water sources. This study explores potential adaptation and management strategies that utilities can implement to sustainably strengthen supply system resilience and enhance water security, in the context of low- to middle-income regions. A series of comparative and case study analyses were conducted to assess the feasibility …

Wildfire Hydrologic Impacts, Kathleen E. Inman

Theses and Dissertations

Wildfires are essential processes for certain ecosystems but are increasing in severity and occurrence. These increases are negatively changing hydrology. Anticipating the hydrologic changes is necessary for management of effected watersheds, infrastructure, and downstream users. This study hypothesized land cover changes post-fire would increase water temperature and discharge in burned watersheds located in the Willamette Basin. This study (1) evaluated the change in estimated curve numbers (CN) from land cover pre-fire and post-fire to assess expected runoff impacts in watersheds, and (2) identified the significance of actual water temperature and discharge changes using non-parametric statistical analysis. An unburned watershed and …

Asphalt Durability Improvements By Way Of Specification Advancements, Jessica V. Lewis

Theses and Dissertations

The objective of this dissertation is to provide content through which industry and agencies can adjust and/or update standards and specifications, as appropriate, to accommodate the present-day needs of the asphalt industry towards producing more durable asphalt. A total of 78 asphalt mixtures and 9 asphalt binders were evaluated for up to 10 years of field aging to provide content that was analyzed to meet this objective. A full-scale aging site in Columbus, Mississippi was the focal point of the aging experiments. A major conclusion from this work was that Cantabro Mass Loss (CML) testing of cores was able to …

Effect Of Coarse Aggregate On The Stability And Mechanical Performance Of Ultra-High Performance Concrete (Uhpc), Rui Zhong, Mingyan Pan, Hongyu Wu, Zhao Cheng, Jianzhong Liu, Jingquan Wang, Yiming Yao, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The effect of coarse aggregate (CA) on the stability and mechanical performance of ultra-high-performance concrete (UHPC) was investigated. To assess UHPC stability, a unique approach was developed that utilizes specially fabricated large specimens with a depth of 400 mm. It overcomes the drawback of limited CA migration distance using small specimens, which may not replicate conditions relevant to structural applications. The spatial distributions of various constituents along the vertical casting direction were quantified through image processing technology. Results showed an approximately 12 % reduction in CA content in the top layer, while the bottom layer exhibited 12 % more CA …

Investigating Decision Factors For Modularization And Standardization Decision On Early Project Phase: Qualitative Comparative Analysis, Amrit Shahi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Modularization involves shifting site-based work to offsite locations to enhance overall productivity, reduce costs, shorten schedules, and improve project competitiveness. By developing and utilizing consistent designs, facility standardization further optimizes project schedules, costs, and value. When combined, they create a leveraging opportunity, as seen in the shipbuilding and manufacturing industries. While both strategies offer significant advantages, capital projects struggle to have a well-informed modularization and standardization decision during the early project phase (i.e., Opportunity Framing). This often results in improper implementation and lower modularization and standardization levels. The main cause for this is the industry’s limited understanding of early-phase high-level …

Analysis Of Incident Duration And Real-Time Incident Delay Estimation Using Big Data Analytics And Machine Learning Techniques, Zhubin Najafi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Traffic incidents have a significant impact on freeway operations, leading to severe delays, congestion, fuel wastage, and economic losses for commuters. Each year, billions of gallons of fuel are wasted, and drivers incur thousands of dollars in lost time due to incident-related delays. To mitigate these effects, Traffic Management Centers (TMCs) implement incident management strategies aimed at reducing both the frequency and severity of incidents while ensuring their prompt and safe clearance.

Dynamic Message Signs (DMSs) are key tools used by TMCs to communicate travel times and incident information to commuters. Under normal conditions, default travel times are displayed on …

Efficient Wattle Design For High-Level Nuclear Waste Tanks, Jasmine B. Clarke

UNLV Theses, Dissertations, Professional Papers, and Capstones

At the Hanford Site in Washington state and the Savannah River Site in South Carolina, there are underground steel tanks that hold high-level nuclear waste (HLW) and nearly 450 million curies of radioactivity. At these sites, some leaks have been detected in HLW tanks. While detecting these leaks allows for identification of the issue, it does not solve the problem or prevent the leakage of HLW contaminants into collection pans and secondary containment. Repairing these leaks poses potential threats to workers for exposure risk. To address this issue, the present research seeks to create and utilize an active barrier in …

Development And Application Of Low-Cost Carbon Dioxide Sensors In An Urban Environment, David Coghiel

Theses - ALL

Advancements in sensor technology have made air quality monitoring platforms more user-friendly, compact, and affordable. This provides new opportunities to monitor areas of interest in environments previously not investigated. The existing elevated I-81 Viaduct that runs through downtown Syracuse, NY is being demolished to be reconstructed as a ground level community grid. The goal of the study was to develop a network of low-cost air quality sensor units to monitor concentrations of carbon dioxide along the viaduct prior to its reconstruction. Multiple low-cost carbon dioxide sensors were purchased and tested under laboratory and field conditions to determine applicability for continuous …

Civil Engineering Capstone Building Design And Seismic Analysis, Ander P. Mcdade

Honors Theses

The building for the University of Mississippi civil engineering senior design class was designed and analyzed. The building is in Oxford Mississippi. The current address according to the Lafayette Parcel is 825 Sisk Avenue Suite 200. The floor plan, column, and beam design were performed based on engineering judgment and industry standards. The dead, live, snow, rain, and roof live loads were calculated to be 13.3, 50, 20, 27.51, and 20 psf respectively. The building model was created in SAP2000, which was used to generate all loads and load combinations. An analysis was performed to determine the critical loads on …

Peroxi-Electrocoagulation For Pfas Mitigation: The Impact Of Water Quality And Dissolved Organic Matter On Removal Pathways, Donald R. Ryan, Claire K. Baldus, Shimaa M. Kteeba, Melvin Samuel, Yin Wang, Laodong Wang, Brooke K. Mayer, Patrick J. Mcnamara

Civil and Environmental Engineering Faculty Research and Publications

The recent addition of per- and polyfluoroalkyl substances (PFAS) to the National Primary Drinking Water Regulation per- has increased the need for research on PFAS treatment technologies for water and wastewater. Electrochemical treatment processes have been widely investigated for PFAS removal. Peroxi-electrocoagulation (electrocoagulation paired with hydrogen peroxide (EC:H₂O₂)) was evaluated as a novel water treatment process for PFAS mitigation due to the multimechanistic removal pathways that can proceed during treatment, including chemical degradation via oxidation, and physical separation pathways such as sorption to flocs, flotation layer accumulation, and foam fractionation. This work investigated the impacts of …

Numerical Study Of A Locally Resonant Frictional Metamaterial For Seismic Vibration Control Of Liquid Storage Tanks, Shayan Khosravi, Mohsen Amjadian

Civil Engineering Faculty Publications

Liquid storage tanks (LSTs) are critical infrastructure components, storing essential fluids in facilities such as oil refineries and nuclear power plants. However, their vulnerability to seismic damage, including tank wall buckling and anchor uplift due to fluid-structure interaction and sloshing dynamics, necessitates advanced protective measures. This study introduces the Locally Resonant Frictional Metamaterial (LRFM) system as an innovative seismic base-isolation (SBI) technology to mitigate earthquake-induced effects on LSTs. The LRFM system consists of a periodic lattice framework with friction-based resonators designed to attenuate seismic waves by generating low-frequency bandgaps (0–20 Hz), which is a critical range for mitigating impulsive seismic …

Frequency Up-Conversion Electromagnetic Energy Harvester For Generating Electrical Power From Vibration Of Beams Under Moving Load, Md Ismail Monsury, Adamaris Sanchez, Mohsen Amjadian, Constantine Tarawneh

Civil Engineering Faculty Publications

This paper studies a single-resonator electromagnetic energy harvester that employs an impact-driven frequency up-conversion mechanism to convert low-frequency vibrations of a multi-span beam, subjected to successive moving loads, into electrical power. The harvester consists of a cantilever beam made of plastic, serving as the resonator, with a thick square copper coil attached to its free end. This coil moves relative to two stationary cubic neodymium permanent magnets, each positioned on one side of the coil. To expand the harvester’s operational bandwidth, a stopper is positioned beneath the resonator, inducing controlled mechanical impacts as the cantilever beam vibrates. These impacts effectively …

Enhancing Asphalt Mix Design Through Film Thickness And Bailey’S Gradation Method, Lydia Quinn

Civil Engineering Undergraduate Honors Theses

Contemporary asphalt research aims to strike a balance between rutting and fatigue cracking to enhance pavement longevity. The performance of asphalt mixtures is influenced by factors such as aggregate gradation and asphalt film thickness. Although gradation typically adheres to the mid-gradation method, asphalt film thickness is included in certain mix designs, even though it is not universally regarded as an essential parameter. Nonetheless, no current method primarily addresses both gradation and asphalt film thickness together. In this research, aggregate gradations were designed using the principles of Bailey’s method along with various other criteria such as control points, the dust to …

A Statistical Investigation Of The Parameters Influencing Rutting And Cracking Performance In Asphalt Mixtures, Alexis Light

Civil Engineering Undergraduate Honors Theses

Durable pavement is essential for modern transportation infrastructure, especially in the United States of America which boasts over 8.5 million lane miles of roads and highways. Despite advanced construction techniques, asphalt pavements are susceptible to rutting and cracking, significantly affecting their performance and maintenance costs. Current methods for analyzing rutting and cracking in asphalt mixtures rely on various parameters, leading to measurement variability. This highlights the need for more rigorous analysis to explore the relationship between mix design variables and pavement performance. This research explores the IDEAL-CT and APA data from 171 mix designs collected by the Arkansas Department of …

Effect Of Beam Bracing On The Seismic Performance Of Laterally Skewed Reduced Beam Section Moment Connections With Composite Concrete Slabs, Pratik Ghimire

Graduate Theses and Dissertations

Existing experimental reduced beam section (RBS) moment frame investigations, particularly those used for prequalification in AISC-358, consider orthogonally oriented beam-to-column connections. While the design commentary provided in AISC-358 references recent skewed SMF numerical studies and potential performance effects when a lateral beam skew is introduced, limited experimental studies have been performed to verify the numerical findings. This study presents an experimental investigation into the cyclic behavior of RBS special moment frames that have lateral skew at the beam-to-column connection and composite concrete slabs. In this study, a skewed composite double-sided RBS connection is tested, having beam bracing outside the RBS …

Mechanical Properties And Microstructural Characteristics Of Hydrated Bcsa Cement At Extreme Temperatures, Behzad Farivar

Graduate Theses and Dissertations

Belitic Calcium Sulfoaluminate (BCSA) cement is an alternative binder known for its rapid setting and high early strength, making it ideal for applications such as fast-track construction and repair. This study presents a comprehensive investigation into the behavior of BCSA cement under a wide range of curing temperatures, with emphasis on early-age strength development, admixture effects, and the use of the maturity method for strength prediction.

The research evaluates BCSA cement performance in both hot and cold environments, ranging from approximately -28.9 °C (-20°F) to 49 °C (120°F). In warm climates, citric acid was used as a set retarder to …

Laboratory Performance Evaluation Of Hot Mix Asphalt Mixtures With Incorporations Of Different Recycled Plastic Additives Using The Dry Method, Alvaro A. Cerdas Murillo

All Theses

Asphalt pavements are susceptible to distresses such as cracking, rutting, and moisture damage, which reduce service life and increase maintenance costs. This study evaluated the use of recycled materials from HDPE and LDPE plastics (shredded and pelletized) and PET fibers of two lengths as asphalt mixture additives to provide a sustainable approach to improve performance. The materials were incorporated into two control mixtures designed with the Balanced Mix Design (BMD) method. Laboratory testing assessed cracking and rutting resistance, moisture susceptibility, abrasion resistance, and dynamic modulus across a range of conditions.

Results showed that PET fibers improved cracking resistance due to …

Community Wastewater Treatment Resilience Assessment, Tristan Veal

All Theses

With the rising threat of climate change and cascading impacts from infrastructure failure there is a growing need to strengthen community resilience. Theoretical and practical resilience frameworks are available, but they vary in aim and scope; there is no standard tool to assess resilience. This research expands on the resilience matrix (RM) application methods of previous research completed by the United States Army Corps of Engineers (USACE) and Clemson University. That work focused on drinking water treatment systems and developed a few dozen specific indicators, or metrics, to quantify resilience. This research adds wastewater infrastructure with the aim of identifying …

Hickory Street Square Revitalization, Spencer Knight, Grace Dungan, Tim Kula, Evan Lauritsen, Lindsey Mennenga

Honors Program: Senior Projects (Public)

The Hickory Street Square Revitalization Project seeks to transform a central public space in Sidney, Nebraska into a dynamic, community-oriented area that supports local events, economic activity, and cultural heritage. The project addresses six core objectives: 1) convertible street design, 2) parking lot reconfiguration, 3) public amenities, 4) event flexibility, 5) lighting and signage, and 6) old electric plant renovation. A conceptual design was developed by the design team (S.T.E.E.L. Sentinel Solutions) by synthesizing the most effective features of three preliminary alternatives, shaped further through community feedback and evolving project constraints. The final project design minimizes disruption to existing activity …

Experimental Study Of Novel Bcsa Scc Repair Materials And Implications On Corrosion In Bcsa Concrete Structures, Elizabeth S.M. Poblete

Graduate Theses and Dissertations

Some current building codes for structural concrete allow the use of alternative cement concrete if their structural, durability, and fire performance can be shown to be comparable to portland cement (PC) concrete. One such alternative cement, belitic calcium sulfoaluminate (BCSA) cement, is a promising standalone replacement for portland cement given its lower global warming potential (GWP), fast setting time, and high early age compressive strength. These properties also make it an ideal repair material. But repair materials often need to be highly flowable and easy to consolidate and their performance when used to repair PC concrete structures must be understood. …

Performance Evaluation Of Highly Modified Asphalt-Based Binders In High Friction Surface Treatment: Comparative Study With Epoxy-Based System, Alireza Roshan, Magdy Abdelrahman, Mohyeldin Ragab

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High Friction Surface Treatments (HFSTs) are frequently used to increase skid resistance and reduce collisions, particularly in crash-prone zones, including horizontal curves and intersections. Epoxy-based binders traditionally have been the sole option for HFSTs, but their drawbacks, such as high costs and compatibility challenges, have led to the search for substitute binders, including asphalt-based options. This study investigates the comparative performance of highly modified asphalt-based binders, including polymer-modified, mastic, and highly modified emulsions, in HFST applications using two aggregate types, Calcined Bauxite (CB) and Rhyolite with different gradations, with an emphasis on their frictional properties, durability, and resistance to polishing. …

Bim Assessment For State Departments Of Transportation, Francisco Israel Guillen

Open Access Theses & Dissertations

Building Information Modeling (BIM) has been used by the Architecture, Engineering, and Construction (AEC) industry to enhance the efficiency and quality of work across various stages, including planning, design, construction, and operation and maintenance (OM) of projects. Despite widespread adoption in vertical construction, BIM implementation in infrastructure projects is still falling behind. This disparity can be attributed to several factors, including the complexity and scale of infrastructure projects and varying levels of BIM adoption and integration within organizations. Efforts to standardize BIM practices and enhance the digital capabilities of infrastructure projects are essential to bridge this gap and ensure the …

Charging Infrastructure Needs For Electric Trucks In Texas, Katerina Jilkova

Open Access Theses & Dissertations

This thesis focuses on the design of a methodology for determining the optimal location of charging stations for heavy-duty electric trucks. The work focuses primarily on long-distance trips that require charging the truck battery outside cities, where the range of charging stations is not extensive. In addition to design the algorithm, the thesis also focuses on implementing the algorithm on a specific case - the implementation of charging stations in the I-10 Freeway corridor between El Paso and San Antonio. The output of the work is not only a description of the procedure, but also an application to a real …

Wind-Induced Gravel Blow-Off: Experimental Investigations And Predictive Modeling For Resilient Roof Design, Md Safwan Ahsanullah

All Dissertations

Roof gravel blow-off during severe windstorms is a major hazard, leading to roof damage and significant downwind impacts. Understanding the initiation mechanisms for gravel blow-off is critical for improving building design and mitigating windborne debris risks. Existing experimental data on the wind speed required to initiate gravel blow-off have been collected from high-speed, full-scale tests at wind tunnels. While these tests form the basis of current design guidelines, they are expensive and can lack generalizability. As a result, rooftop gravel is frequently blown off at wind speeds below the design thresholds. This dissertation investigates the onset of rooftop gravel motion, …