Engineering Commons^™

Analysis And Uncertainty Reduction Through Data Augmentation In Hurricane Risk Modeling In The State Of Florida, Daphne Raquel Otarola Farah

Theses and Dissertations

The Florida Public Hurricane Loss Model (FPHLM) and the Florida Public Flood Loss Model (FPFLM) project insurance losses due to hurricane events in the State of Florida from hurricane induced wind, rain, and flood. This hurricane catastrophe model estimates annual average loss costs, as well as mean loss levels for scenario events, for personal and commercial residential portfolios, including building structure, content, appurtenant, and additional living expenses. Insurance companies use these hurricane risk models in Florida, and in particular the Florida Office of Insurance Regulation (OIR) mandates that the FPHLM be used for the stress test, that verifies the actuarial …

Impact Of Antecedent Wetness And Rainfall Spatial Variability On Design Floods, Rachael Nicole Mcmahon

Theses and Dissertations

In the absence of long hydrologic records, water engineering design application rely primarily on the concept of design storms and subsequently design floods. However, despite the long-lasting use of these approaches there are several aspects that merit careful consideration and possibly revision. Representation of spatial variability of rainfall extremes in design storms has relied primarily on the use of area reduction factors that while useful, they do not represent realistic patterns of flood inducing storms. Furthermore, the impact of antecedent wetness on the transformation of design storms to design floods is often neglected. In this work we carry out a …

Compound Extremes Drive The Western Oregon Wildfires Of September 2020, John T. Abatzoglou, David E. Rupp, Larry W. O'Neill, Mojtaba Sadegh

Civil Engineering Faculty Publications and Presentations

Several very large high‐impact fires burned nearly 4,000 km² of mesic forests in western Oregon during September 7–9, 2020. While infrequent, very large high‐severity fires have occurred historically in western Oregon, the extreme nature of this event warrants analyses of climate and meteorological drivers. A strong blocking pattern led to an intrusion of dry air and strong downslope east winds in the Oregon Cascades following a warm‐dry 60‐day period that promoted widespread fuel flammability. Viewed independently, both the downslope east winds and fuel dryness were extreme, but not unprecedented. However, the concurrence of these drivers resulted in compound extremes …

A Magneto-Mechanical Piezoelectric Energy Harvester Designed To Scavenge Ac Magnetic Field From Thermal Power Plant With Power-Line Cables, Quan Wang, Kyung-Bum Kim, Sang-Bum Woo, Yooseob Song, Tae-Hyun Sang

Civil Engineering Faculty Publications

Piezoelectric energy harvesters have attracted much attention because they are crucial in portable industrial applications. Here, we report on a high-power device based on a magneto-mechanical piezoelectric energy harvester to scavenge the AC magnetic field from a power-line cable for industrial applications. The electrical output performance of the harvester (×4 layers) reached an output voltage of 60.8 V_max, an output power of 215 mW_max (98 mW_rms), and a power density of 94.5 mW_max/cm³ (43.5 mW_rms/cm³) at an impedance matching of 5 kΩ under a magnetic field of 80 …

Medical Service Facility Site Development, Sabrina Carvajal

Honors Theses

This report provides a clear description of a site development design project for a future medical service facility. The site is approximately 46,818 square feet and is located at 203 E. Centre Avenue Portage, Michigan 49002 United States. This is in a high traffic area that is surrounded by different public and academic institutions including Portage Central High School and Portage Public Library. The commercial buildings surrounding this area are Comerica Bank, Dairy Queen and a new Senior Center currently under construction. Our team is proposing two different site-layout options for the future development of this building. This medical service …

Editorial: Forest Management Alters Forest Water Use And Drought Vulnerability, Christina Tague, Matthew D. Hurteau, Anthony J. Parolari

Civil and Environmental Engineering Faculty Research and Publications

This collection of papers provides new insights into how forest management, forest water use and droughts are interrelated. The collection considers both ecohydrologic impacts of changes in forest density (through thinning or fire) and impacts that could occur via species management.

Modeling Considerations For Built-Up Compression Members In Communication Towers, Ghada M. El-Mahdy P.Eng., Ceng, Amro A. Alawamry

Civil Engineering

It is a well-established fact that built-up compression members exhibit extra flexibility than their equivalent solid members due to the shear action which effects the overall stability. This is usually taken into consideration by using a modified slenderness ratio for buckling modes that involve relative deformation of the interconnectors. Built-up members are often used as space truss members in communication towers. When modeling communication towers in structural analysis programs like SAP2000, the built-up member is usually defined as a single member element with a double section cross section. This does not catch the increase in deflection in the member due …

Evaluation Of Permanent Concrete Barriers To Mash 2016, Samuel Elias Hovde

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The objective of this research project was to develop evaluation criteria for permanent concrete barriers to MASH 2016 TL-3 and TL-4 without crash testing and then to evaluate permanent concrete barrier standards provided by the sponsoring agencies of the Midwest Pooled Fund Program. A literature review was conducted to determine evaluation criteria for stability, shape, strength, and anchorage, and a database of permanent concrete barrier crash tests was compiled. A survey was conducted to collect barrier standards from the members of the Midwest Pooled Fund Program, and barriers were selected and evaluated according to the determined methodology. A total of …

A Flexible Piezoelectric Energy Harvester-Based Single-Layer Ws2 Nanometer 2d Material For Self-Powered Sensors, Quan Wang, Kyung-Bum Kim, Sang Bum Woo, Yooseob Song, Tae Hyun Sung

Civil Engineering Faculty Publications

A piezoelectric sensor is a typical self-powered sensor. With the advantages of a high sensitivity, high frequency band, high signal-to-noise ratio, simple structure, light weight, and reliable operation, it has gradually been applied to the field of smart wearable devices. Here, we first report a flexible piezoelectric sensor (FPS) based on tungsten disulfide (WS₂) monolayers that generate electricity when subjected to human movement. The generator maximum voltage was 2.26 V, and the produced energy was 55.45 μJ of the electrical charge on the capacitor (capacity: 220 μF) when applying periodic pressing by 13 kg. The generator demonstrated here …

Hydrodynamic Analysis Of A Wave Energy Converter (Wec), A. Kapperman, B. Rodriguez, A. Daniels, C. Harrison, P. Tubuntoeng, L. Fernandez De Valderrama, B. Labban, J. Whipple, C. Akan, N. Ozdemir

Showcase of Osprey Advancements in Research and Scholarship (SOARS)

Honorable Mention Winner

The UNF CREW competing in the U.S. Department of Energy 2021 Marine Energy Collegiate Competition developed a Wave Energy Converter (WEC) for quick deployment in disaster relief areas. When natural disasters disable coastal power grids, a WEC can be easily deployed close to shore and serve as a source of electricity. The ocean waves move magnets through a coil wired within the WEC to generate electricity. To initiate the design process, ANSYS AQWA software simulated both the oceanic environment and the device’s response in the WEC’s testing conditions. AQWA allows the user to change device dimensions easily …

Quantifying Surface Morphology Of Manufactured Activated Carbon And The Waste Coffee Grounds Using The Getis-Ord-Gi* Statistic And Ripley’S K Function, Sanghoon Lee, Sukjoon Na, Olivia G. Rogers, Sungmin Youn

All Engineering Faculty Research

Activated carbon can be manufactured from waste coffee grounds via physical and/or chemical activation processes. However, challenges remain to quantify the differences in surface morphology between manufactured activated carbon granules and the waste coffee grounds. This paper presents a novel quantitative method to determine the quality of the physical and chemical activation processes performed in the presence of intensity inhomogeneity and identify surface characteristics of manufactured activated carbon granules and the waste coffee grounds. The spatial density was calculated by the Getis-Ord-Gi* statistic in scanning electron microscopy images. The spatial characteristics were determined by analyzing Ripley’s K function and complete …

Effects Of Historical Land-Use Change On Surface Runoff And Flooding In The Amite River Basin, Louisiana, Usa Using Coupled 1d/2d Hec-Ras–Hec-Hms Hydrological Modeling, Alexandre G. H. Cowles

LSU Master's Theses

The Amite River Basin is a largely rural watershed spanning parts of four counties in southern Mississippi and seven parishes in southeast Louisiana, with basinwide imperviousness increasing from 0.82% in 1938 to 3.85% in 2016. The Basin has been the subject of significant research interest since catastrophic flooding in 2016 caused 13 deaths and widespread damages. Rapid development in recent decades has led to an expansion of impervious surfaces in Baton Rouge and surrounding areas, encroaching on floodplains and wetlands. At the basin scale, differences in flooding due to impervious cover changes were found to be somewhat limited, particularly along …

Pooling Data Improves Multimodel Idf Estimates Over Median-Based Idf Estimates: Analysis Over The Susquehanna And Florida, Abhishekh Kumar Srivastava, Richard Grotjahn, Paul Aaron Ullrich, Mojtaba Sadegh

Civil Engineering Faculty Publications and Presentations

Traditional multimodel methods for estimating future changes in precipitation intensity, duration, and frequency (IDF) curves rely on mean or median of models’ IDF estimates. Such multimodel estimates are impaired by large estimation uncertainty, shadowing their efficacy in planning efforts. Here, assuming that each climate model is one representation of the underlying data generating process, i.e., the Earth system, we propose a novel extension of current methods through pooling model data: (i) evaluate performance of climate models in simulating the spatial and temporal variability of the observed annual maximum precipitation (AMP), (ii) bias-correct and pool historical and future AMP data of …

Distributionally Robust Optimization Utilizing Facility Location Problems, Elijah Kling

Civil and Environmental Engineering Undergraduate Honors Theses

Facility location problems are used in widespread application in transportation, freight, supply chain, and logistics problems. Models can be developed as deterministic, where all parameters are known, or robust, where a parameter has uncertainty. This thesis explores a new method for developing robust formulation and compares the implications of assuming values for this uncertain parameter. Two models are solved, and both are compared against their deterministic counterparts using numerical analysis. By manipulating the input parameters and considering real world implications of the solutions, either the robust or deterministic can show better performance.

The Influence Of Channel Deepening On Tides, River Discharge Effects, And Storm Surge, Stefan A. Talke, Ramin Familkhalili, David A. Jay

Civil and Environmental Engineering Faculty Publications and Presentations

We combine archival research, semi-analytical models, and numerical simulations to address the following question: how do changes to channel geometry alter tidal properties and flood dynamics in a hyposynchronous, strongly frictional estuary with a landward decay in tidal amplitudes? Records in the Saint Johns River Estuary since the 1890s show that tidal range has doubled in Jacksonville, Florida. Near the estuary inlet, tidal discharge approximately doubled but tidal amplitudes increased only ~6%. Modeling shows that increased shipping channel depths from 5-6 to ~13m drove the observed changes, with other factors like channel shortening and width reduction producing comparatively minor effects. …

Characterization Of Uranium, Lead, And Rare Earth Element Pollution In Natural Soils And Sediments, Hope Rasmussen

Civil and Environmental Engineering Theses and Dissertations

Heavy metals in the environment add to the global burden of pollution, negatively impacting public health and ecosystem resilience. This study included projects regarding uranium (U), lead (Pb), and rare earth elements (REE) in natural samples, due to their known toxicity, ubiquity, and relevance in context to recent pollution trends. The first project focused on testing the potential of using a hydroxyapatite product as a remediation solution for U-contaminated groundwater and soil at an EPA Superfund site. The results showed that the U was sequestered in a highly crystalline mineral form within the solids, guiding the EPA to specify the …

Damage Evolution And High-Rate Response Of High-Strength Concrete Under Triaxial Loading, Brett Williams

Mechanical Engineering Research Theses and Dissertations

The research presented in this study focuses on understanding fundamental mechanisms that drive material response under dynamic loading conditions. The objectives of the research were to: (1) to understand damage initiation and propagation in the bulk geomaterial under a variety of loading conditions and (2) to systematically investigate the strain rate effects on the triaxial compressive response of cementitious materials through the development of an innovative, first of its kind large-diameter (50 mm) triaxial Kolsky bar system.

The triaxial compressive response of high-strength concrete is needed to understand pressure-dependent material behavior, which is important for modeling extreme loading events. However, …

Study Of Fragility Functions For Assessing Damage To Water Pipe Networks Caused By Earthquake Loading, Dylan Joseph Merlo

Master's Theses

The performance of water lifelines during seismic events is an area of ongoing research. In this study we evaluate eight (8) different seismic events and the impact that ground shaking and ground deformations had on water pipeline systems. The overall goal of this work is to provide municipalities and utility providers with tools for mitigating the consequences of seismic hazards on water lifeline systems by analyzing the accuracy of damage estimation models. Three (3) different repair rate models are evaluated using data collected from the seismic events and compared to observed repair rate data. Results are analyzed to examine the …

The Effect Of Lanthanides On Corn Growth, Savanna Vacek

Undergraduate Research Symposium Podium Presentations

Wastewater treatment plants (WWTPs) offer a reliable source of reclaimed water for irrigation. Metal-based chemicals (i.e. coagulants) are frequently employed in wastewater treatment, and residual metal ions remain in the treated wastewater, which could result in application of these metal ions to agricultural fields and crops. This study focuses on an emerging coagulant containing lanthanum. The behavior of lanthanum reclaimed water (LaRW) towards corn growth is barely known. Thus, if we are to recycle LaRW to support corn growth, the effects of LaRW on corn growth need to be studied. Corn kernels were grown in varying lanthanum concentrations (0-5000 mg …

Maximum Coverage Facility Location Drone Routing Problem With Multiple Trip Stops, Marie Roza

Civil and Environmental Engineering Undergraduate Honors Theses

Integer linear optimization can be used to formulate routing problems as models to find optimal solutions given a set of inputs and constraints. In this research, Chauhan et al.'s publication, "Maximum coverage capacitated facility location problem with range constrained drones," is expanded upon by modeling a facility location problem with two-to-one drone deliveries. The model analyzes a set of potential facilities that are available to meet the demands of a set of demand points. The drone delivery routes are modeled with the assumption that each opened facility is assigned one drone that can fulfill up to two demand points’ demands …

Probabilistic Prediction Model For Rc Bond Failure Mode, Ahmad Soraghi, Qindan Huang

Civil and Environmental Engineering Faculty Research and Publications

Adequate rebar-concrete bonding is crucial to ensure the reliable performance of reinforced concrete (RC) structures. Many factors such as the concrete properties, concrete cover depth, transverse reinforcement, and the presence of corrosion will affect the bond behavior, and consequently, the structural performance. While many prior studies have focused on the influence of the aforementioned factors on the bond strength, the impact of these factors on the bond failure mode has not been thoroughly investigated. A probabilistic bond failure mode prediction model that considers various influencing factors including loading type and corrosion is developed in this study. This study uses the …

Artificial Intelligence Driven Infrastructure Management And Maintenance Plan, Julian Jesso

Doctoral Dissertations and Master's Theses

Rapid development in trucking technology and increasing demands in freight transportation has led to longer and heavier vehicles traveling on Florida’s highway system. Vehicles with gross vehicle weight (GVW) over 80,000 pounds, or permit vehicles, have significant effects on infrastructure, thus requiring an approved permit prior to departure. The combination of these increasing loads and harsh environmental conditions that Florida is subject to requires an enhanced infrastructure management program. Additionally, there is a need to eliminate inconsistencies in permit applications and derive a uniform maintenance practice for Florida’s infrastructure. In this research, the focus was to develop an analytical procedure …

Experimental Study Of Hollow-Core Slab Containing Waste Pet Bottles, Mulia Orientilize, Josia Irwan Rastandi, R. M. Dimas Aries C., Marsha Niken P., Krisna Adi S.S., Abimantrana Abimantrana

Makara Journal of Technology

This study investigated the utilization of plastic-waste concrete as an effort to reduce urban waste problems. The waste plastic bottles were utilized to form the hollows of the hollow-core slabs (HCSs). The bottles were made of polyethylene terephthalate (PET). As a part of green research to reuse waste material, shredded PET was also added to the concrete mixture to improve the HCS strength. The cast-in-site HCS could be constructed without any difficulties. Three parameters were investigated: the effects of void content, shredded PET content, and steel-fiber (SF) content on the HCS ultimate bending capacity (Mu). Fifteen specimens were tested under …

Improving The Intellectual And Social Development Of Children With Autism: Design Of A Training Center For Autism, Hasti Jalalian

Makara Journal of Technology

Research on the relationship between the role of architecture and the psychology of children with autism, which indicates that appropriate environments for these children can have a significant effect on their healthcare process, has been recently conducted. However, statistics show that autism spectrum disorders are pervasive, and its extent in Iran has been increasing. Moreover, centers that are specifically designed for children with autism are limited, and paradigms are made without considering the mood of these children. Given the role of architecture in designing a suitable space for these children, an investigation that can identify the specific requirements of these …

Numerical Study Of A Buckling Restrained Brace (Brb) In Steel Structures And Comparison With A Convergent Ordinary Brace (Ocb) Under Static And Dynamic Loading, Fatemeh Habibpour

Makara Journal of Technology

Bulk metallic glass (BMG) has good mechanical strength, high hardness, wear resistance, and corrosion resistance with promising application in various industries. However, for the industrial production of BMG, the main issue is how to overcome limitations of joining with other materials. The present study focuses on solder processing at low operating temperature to avoid exceeding the recrystallization temperature. A feasible joining process for BMG was developed using lead-free solders. The BMG surface is pre-plated with copper, nickel, or titanium as a wetting layer. The reaction temperature is set between the glass transition temperature of BMG and the melting point of …

Collective Risk Of Construction Development On Desert Tortoise Populations, Paulina Smith

Undergraduate Research Symposium Posters

Desert tortoises (Gopherus agassizii) are threatened, extremely territorial reptiles living on a rapidly-shrinking landscape. This literature review was conducted with the goal of determining whether the desert tortoises of the Mojave Desert are experiencing compounded effects from construction development which are not reflected in mortality/fecundity calculations in the current literature. Seventeen peer-reviewed sources were identified from the last 20 years which related to roads, railroads, wind-harvesting, solar energy, and man-made barriers/flood control centers in the Mojave. Current literature reveals that researchers do not have the time nor resources to pursue long-term studies on all of the possible effects on this …

Analysis Of The Interfacial Reaction Between Bulk Metallic Glass Coated Copper, Nickel, And Titanium With Lead-Free Solders, Andromeda Dwi Laksono, Yee-Wen Yen, Rifqi Aulia Tanjung, Teodoro A. Amatosa, Ruki Harwahyu

Makara Journal of Technology

Bulk metallic glass (BMG) has good mechanical strength, high hardness, wear resistance, and corrosion resistance with promising application in various industries. However, for the industrial production of BMG, the main issue is how to overcome limitations of joining with other materials. The present study focuses on solder processing at low operating temperature to avoid exceeding the recrystallization temperature. A feasible joining process for BMG was developed using lead-free solders. The BMG surface is pre-plated with copper, nickel, or titanium as a wetting layer. The reaction temperature is set between the glass transition temperature of BMG and the melting point of …

Design Of Ac Microgrid Topology With Photovoltaic Uncertainties In A Rural Village, Vannak Vai

Makara Journal of Technology

Energy needs are increasing day by day, especially for developing countries, due to population growth and changing lifestyles. A suitable microgrid topology with renewable energy integration is considered to fulfill the people and society’s needs. This paper focuses on the design of AC microgrid topology for a nonelectrified village with the integration of PV uncertainties in both sitting and sizing. The development of an optimal algorithm based on the conductor use minimization and unbalanced load improvement is proposed. The shortest path is proposed to search for the minimum conductor use. Then, the algorithm for improving the unbalanced load with two …

Mean-Shift Object Tracking Algorithm With Systematic Sampling Technique, Yoanes Bandung, Aris Ardiansyah

Makara Journal of Technology

Mean shift is a fast object tracking algorithm that only considers pixels in an object area, hence its relatively small computational load. This algorithm is suitable for use in real-time conditions in terms of execution time. The use of histograms causes this algorithm to be relatively resistant to rotation and changes in object size. However, its resistance to lighting changes is not optimal. This study aims to improve the performance of the algorithm under lighting changes and reduce its processing time. The proposed technique involves the use of sampling techniques to reduce the number of iterations, optimization of candidate search …

Analysis Of Correlation And Mapping Of Chlorophyll-A Concentrations And Sea Surface Temperatures In Coastal Areas Based On Terra Modis Satellite Image Data, Hendrata Wibisana, Bangun Muljo Sukotjo, Umboro Lasminto

Makara Journal of Technology

Ecosystems in aquatic environments are distinct from ecosystems on land. Changes that occur in ecosystems in aquatic environments affect the lives of biota in these waters, including the fish used as a food source in fishing communities in coastal areas. This study aims to determine the role of remote sensing in mapping and analyzing the relationship between the parameters of sea surface temperature and chlorophyll-a concentrations on the coast. The correlation of sea surface temperature with chlorophyll-a concentrations is modeled via linear regression. An analysis of variance test is performed to establish the suitability of the temperature data for the …