Engineering Commons^™

Surface Studies Of Corrosion Of Stainless Steel By Lead Bismuth Eutectic, Daniel Koury, Brian D. Hosterman, John Farley, Dale L. Perry, D. Parsons, J. Manzerova, Allen L. Johnson

Transmutation Sciences Materials (TRP)

Why is Lead Bismuth Eutectic Important?

• Changing national security stances have led to reexamination of nuclear waste reprocessing

• Dangerous actinides can be separated and

• Transmuted into safer products, creating a waste form dangerous for only hundreds of years, in addition to the production (up to 1/3 of the original fission energy) of useful energy

• Non-moderating coolants or spallation targets for production of fast neutrons is required for transmutation

• Russian experience with LBE coolants in their nuclear submarine fleet makes LBE an attractive possible transmutation coolant technology

• Corrosion of steel by LBE is an important …

Environment-Induced Degradation And Crack-Growth Studies Of Candidate Target Materials, Ajit K. Roy, Brendan O'Toole, Zhiyong Wang, David W. Hatchett

Transmutation Sciences Materials (TRP)

The primary objective of this task is to evaluate the potential for the environmentally-assisted cracking of candidate target materials for applications in spallation-neutron-target systems, such as accelerator-driven system for the transmutation of waste. The materials selected for evaluation and characterization are martensitic stainless steels (SS) including Alloys HT- 9, EP 823 and Type 422 stainless steel.

More recently, this experimental program has been expanded to evaluate the effect of molten lead-bismuth eutectic (LBE) on the corrosion behavior of target materials in the presence of oxygen. Since the materials performance laboratory (MPL) at UNLV currently cannot accommodate this type of testing, …

Modeling Corrosion In Oxygen Controlled Lbe Systems With Coupling Of Chemical Kinetics And Hydrodynamics, Samir Moujaes, Yitung Chen

Transmutation Sciences Materials (TRP)

The corrosion of structural materials is a major concern for the use of lead-bismuth eutectic (LBE) systems for nuclear applications such as in transmuter targets or fast reactors. Corrosion in liquid metal systems can occur through various processes, including, for example, dissolution, formation of inter-metallic compounds at the interface, and penetration of liquid metal along grain boundaries. Predicting the rate of these processes depends on numerous system operational factors: temperature, system geometry, thermal gradients, solid and liquid compositions, and velocity of the liquid metal, to name a few. Corrosion, along with mechanical and/or hydraulic factors, often contributes to component failure. …

Modeling Of Corrosion In Oxygen Controlled Lead Bismuth Eutectic Systems With The Coupling Of Chemical Kinetics And Hydrodynamics, Samir Moujaes, Yitung Chen, Kanthi Kiran Dasika, Chao Wu

Transmutation Sciences Materials (TRP)

Objectives:

• To simulate a 2-D model of the Materials Test Loop by approximating it to be a toroid with a pie cross section for the purpose of comparing the simulated results with the analytical results.
• The temperature and concentration profiles on the wall boundaries imposed are similar to the actual test model.
• Geometry effects have great influence on local corrosion rate.
• A 2-D benchmark problem and a sudden expansion case are studied which show good consistency to analytical solution.
• Results from 2-D sudden expansion problem are similar to experimental data obtained by other researchers.

Dynamics Of Bulk And Adsorbed Poly(Vinyl Acetate), Frank D. Blum, Robert D. O'Connor

Materials Science and Engineering Faculty Research & Creative Works

We have recently completed a series of experiments on methyl-labeled poly(vinyl acetate)-d3, (PVAc-d3)1 and poly(methyl acrylate)-d3 (PMA-d3).234 the systems have been studied as a function of the adsorbed amount, molecular weight, and presence of a protonated overlayer. Using deuterium line shape analysis, we have found that around the glass transition temperature, the adsorbed polymers show the presence of a motional gradient. Polymer segments near the silica-polymer interface have less mobility than the bulk polymer and those near the polymer-air interface are more mobile than those of the bulk polymer. A schematic representation of the motional gradient is shown in Figure …

Deuterium Nmr Studies Of Bulk And Silica-Absorbed Polystyrene, Macduff O. Okuom, Jinhua Yang, Frank D. Blum

Chemistry Faculty Research & Creative Works

Thin polymer films are used in applications such as electronics, biomedical devices and coatings. As the trend to make the devices smaller continues, a film's influence on a material's overall properties becomes more prominent. Previous studies have shown that thin polymer films have characteristics slightly different from those of bulk polymers. Film behavior has been characterized by examining thermal expansion, diffusion, conformation, density and glass transitions. The dynamics of glassy polystyrene has been investigated using a wide variety of theoretical and experimental methods. Schaefer et al., using 13C NMR, reported that ~7% of phenyl rings in polystyrene undergo -flips. Using …

Ft-Ir Studies Of Stereo Regular Pmma On Silica: Drying Effects, Bing Zhang, Suntree Kulkeratiyut, Suriyaphongse Kulkeratiyut, Frank D. Blum

Chemistry Faculty Research & Creative Works

A great amount of work has been done on the configuration of surface adsorbed poly(methyl methacrylate) (PMMA), especially on surfaces to which they have a strong attraction. Some studies have been make on the relationships between configuration and tacticity, molecular weight, adsorbed amount, and density of surface hydroxyl groups. The effect of tacticity on the conformation of alumina-adsorbed PMMA in solution and dry spin-coated films were studied by Grohen et al. Their results showed that surface-adsorbed PMMA chains adopted a relatively flat configuration, but iso-PMMA (isotactic) adsorbed on aluminum, with a much larger fraction of the bound carbonyl groups, had …

Molecular Mass And Dynamics In Pma-D₃ In The Glass Transition Region, Burak Metin, Frank D. Blum

Chemistry Faculty Research & Creative Works

The segmental dynamics through the glass transition region, by which the glassy polymer becomes rubbery, are not well understood. Free volume, thermodynamic and kinetic theories have been used to describe the phenomenon behind the glass transition and some of those theories were tested with computer simulations. Different experimental techniques, such as NMR, thermo-mechanical analysis (TMA), differential scanning calorimetry (DSC), dilatometry and dynamic mechanical analysis (DMA) have all been also used to probe this important phenomena. Deuterium (2H) NMR has been a valuable tool for the investigation of the dynamics of macromolecules. Deuteration of macromolecules at specific locations on the chains …

How To Establish Successful Cooperative Student Learning Centers For Stem Courses, Ronald James Bieniek, Douglas R. Carroll, Cesar Mendoza, Oran Allan Pringle, Ekkehard Sinn, Kai-Tak Wan, Donald C. Wunsch

Physics Faculty Research & Creative Works

Students learn more if they are actively involved in the learning process, particularly in a cooperative manner. Several UMR faculty have operated course-based learning centers (LCs) as part of the campus-wide Learning Enhancement Across Disciplines (LEAD) Program of student learning assistance and enhancement. LCs are designed to assist large numbers of students in a cost- and time-efficient manner that promotes student engagement without requiring undue amounts of faculty time. Course instructors spend time in the open learning environment of the LC, in lieu of office hours, guiding students to master course material and skills in their evolution from novice to …