Engineering Commons^™

Development And Testing Of An Asymmetric Capacitor With A Nickel-Carbon Foam Positive Electrode, Wen Nee Yeo

Dissertations, Master's Theses and Master's Reports - Open

Electrochemical capacitors (ECs), also known as supercapacitors or ultracapacitors, are energy storage devices with properties between batteries and conventional capacitors. EC have evolved through several generations. The trend in EC is to combine a double-layer electrode with a battery-type electrode in an asymmetric capacitor configuration. The double-layer electrode is usually an activated carbon (AC) since it has high surface area, good conductivity, and relatively low cost. The battery-type electrode usually consists of PbO₂ or Ni(OH)₂.

In this research, a graphitic carbon foam was impregnated with Co-substituted Ni(OH)₂ using electrochemical deposition to serve as the positive electrode …

Graphite Exfoliation By Supercritical Carbon Dioxide Extraction, Chaiyaporn Wattanaprayoon

Dissertations, Master's Theses and Master's Reports - Open

Supercritical carbon dioxide is used to exfoliate graphite, producing a small, several-layer graphitic flake. The supercritical conditions of 2000, 2500, and 3000 psi and temperatures of 40°, 50°, and 60°C, have been used to study the effect of critical density on the sizes and zeta potentials of the treated flakes. Photon Correlation Spectroscopy (PCS), Brunauer-Emmett-Teller (BET) surface area measurement, field emission scanning electron microscopy (FE-SEM), and atomic force microscopy (AFM) are used to observe the features of the flakes. N-methyl-2-pyrrolidinone (NMP), dimethylformamide (DMF), and isopropanol are used as co-solvents to enhance the supercritical carbon dioxide treatment. As a result, the …

Modeling Of Diesel Particulate Filter Filtration And Regeneration For Transient Driving Schedules, Di Huang

Dissertations, Master's Theses and Master's Reports - Open

Due to their high thermal efficiency, diesel engines have excellent fuel economy and have been widely used as a power source for many vehicles. Diesel engines emit less greenhouse gases (carbon dioxide) compared with gasoline engines. However, diesel engines emit large amounts of particulate matter (PM) which can imperil human health. The best way to reduce the particulate matter is by using the Diesel Particulate Filter (DPF) system which consists of a wall-flow monolith which can trap particulates, and the DPF can be periodically regenerated to remove the collected particulates.

The estimation of the PM mass accumulated in the DPF …

Synthesis And Characterization Of Polymeric Antioxidant Delivery Systems, Paritosh P. Wattamwar

Theses and Dissertations--Chemical and Materials Engineering

Even though the role of oxidative stress in a variety of disease states is known, strategies to alleviate this oxidative stress by antioxidants have not been able to achieve clinical success. Particularly, treatment of oxidative stress by small molecule antioxidants has not received due attention because of the challenges associated with its delivery. Antioxidant polymers, where small molecule antioxidants are incorporated into the polymer backbone, are an emerging class of materials that can address some of these challenges.

In this work, biodegradable polymers incorporating phenolic antioxidants in the polymer backbone were synthesized. Antioxidant polymers were then characterized for their in …

Stability Of Affinity Based Layer-By-Layer Polymeric Self-Assemblies For Oral Wound Applications, Sundar Prasanth Authimoolam

Theses and Dissertations--Chemical and Materials Engineering

Oral mucositis is a painful and debilitating chronic inflammatory condition that can result from chemo and/or radiotherapy. While current treatment strategies which provide temporary relief exist, there is still an unmet clinical need for a robust long active barrier strategy which can simultaneously provide protection and release drug to enhance the wound healing response. It is proposed that an affinity based layer-by-layer self-assembled barrier administered as a series of mouth rinses can allow for wound specific drug delivery, providing an effective regenerative therapy.

In this work, biotinylated poly(acrylic acid) is used to develop LBL assemblies based upon biotin-streptavidin affinity interactions. …

Dynamic Relaxation Properties Of Aromatic Polyimides And Polymer Nanocomposites, Anthony C. Comer

Theses and Dissertations--Chemical and Materials Engineering

The dynamic relaxation characteristics of Matrimid^® (BTDA-DAPI) polyimide and several functionalized aromatic polyimides have been investigated using dynamic mechanical and dielectric methods. The functionalized polyimides were thermally rearranged to generate polybenzoxazole membranes with controlled free volume characteristics. All polyimides have application in membrane separations and exhibit three motional processes with increasing temperature: two sub-glass relaxations (ƴ and β transitions), and the glass-rubber (α) transition. For Matrimid, the low-temperature ƴ transition is purely non-cooperative, while the β sub-glass transition shows a more cooperative character as assessed via the Starkweather method. For the thermally rearranged polyimides, the ƴ transition is a …

Cactus Mucilage-Assisted Heavy Metal Separation: Design And Implementation, Dawn Iona Fox

USF Tampa Graduate Theses and Dissertations

Natural contamination of groundwater by arsenic (As) has become a critical public health threat in many parts of the world. The well-known regions associated with As contamination of groundwater are Bangladesh and West Bengal, India where approximately 100 million people are exposed to high levels of arsenic by drinking arsenic-contaminated groundwater and about 35 million are already affected. Long-term drinking of arsenic-contaminated water leads to arsenicosis, which is characterized by cancers of the skin, organ disease and certain other types of cancer. Affected developing communities are at higher risk because they may not have access to conventional water treatment facilities. …

Oxygen Diffusion Characterization Of Frp Composites Used In Concrete Repair And Rehabilitation, Chandra K. Khoe

USF Tampa Graduate Theses and Dissertations

Many independent studies have conclusively demonstrated that fiber reinforced polymers (FRP) slow down chloride-induced corrosion of steel in concrete. The mechanism for this slow down is not well understood but it has been hypothesized that FRP serves as a barrier to the ingress of chloride, moisture, and oxygen that sustain electrochemical corrosion of steel.

This dissertation presents results from an experimental study that determined the oxygen permeation rates of materials used in infrastructure repair. In the study, the oxygen permeation constants for epoxy, carbon and glass fiber laminates, concrete, epoxy-concrete and FRP-concrete systems were determined and a method developed to …

Catalytic Hydrodehalogenation And Hydrogenation Of Halogenated Aromatic Organic Contaminants For Application To Soil Remediation, Claire J. Osborn

USF Tampa Graduate Theses and Dissertations

The objective of this research was to aid in the development of a new method for removing and destroying soil contaminants. In particular, 1,2,4,5-tetrachlorobenzene (TeCB) was selected for this research. Hydrodehalogenation (HDH) was paired with hydrogenation for remedially destroying TeCB without generating a secondary waste stream in a single batch reactor. Palladium- and rhodium-catalyzed HDH and hydrogenation were applied in a batch reactor at room temperature and moderate hydrogen pressure. Cyclohexane was formed as an end product with benzene as an intermediate reactant.

An analytical method was developed to measure TeCB, benzene, and cyclohexane in a solution of water and …

Supercritical Fluid Aided Microencapsulation Of Dry Powders, Raquel Carvallo

USF Tampa Graduate Theses and Dissertations

Coating of fine particles to produce tailored surface properties is currently a key development for supercritical fluids applications, in different areas such as: pharmaceutical, nutraceutical, cosmetic, agrochemical, electronic and specialty chemistry industries. During the encapsulation process the particles surface can be designed with specific properties by spreading a thin film coating material over the surface of the particles.

Chitosan, a natural polymer, was used in this work as the encapsulant material. Chitosan is biocompatible, biodegradable to normal body constituents, safe, non-toxic, bacteriostatic, anticancerogen, and versatile polymer. These attributes are among the properties that make Chitosan an attractive component of pharmaceutical …

Pyrolysis Kinetics Of A Green River Oil Shale Using A Pressurized Tga, James L. Hillier, Thomas H. Fletcher

Faculty Publications

Crushed samples of Green River Oil Shale and its kerogen extract were pyrolyzed at heating rates from 1 to 10 K/min at pressures of 1 and 40 bar and temperatures up to 1000 C. Two to four mass release peaks were observed with the major two corresponding to kerogen pyrolysis and carbonate decomposition. The transient pyrolysis data were fit with a first-order model and a Distributed Activation Energy Model (DAEM). An F-test was used to determine confidence regions and compare the kinetic parameters among the oil shale and demineralized samples, between the two pressure levels, and between the models. The …

Synthesis And Energy Applications Of Oriented Metal Oxide Nanoporous Films, Qingliu Wu

University of Kentucky Doctoral Dissertations

This dissertation mainly addresses the synthesis of well-ordered mesoporous titania thin films by dip coating with PEO-PPO-PEO triblock copolymer surfactant template P123. Because P123 is composed of poly(ethylene oxide) [PEO] and poly(propylene oxide) [PPO] blocks, concentrations of ingredients are adjusted to tune the films’ wall thickness, pore size and mesophase. Structural changes are consistent with partitioning of species among PEO blocks, PPO blocks, and the PEO/PPO interface. Titanates localize near PEO and increase wall thickness (by 5 nm to 7 nm). Depending on aging temperature, PPG either swells the PPO cores (when it is hydrophobic) or introduces large (>200 …

Studies On Silicon Nmr Characterization And Kinetic Modeling Of The Structural Evolution Of Siloxane-Based Materials And Their Applications In Drug Delivery And Adsorption, Jyotrhirmai Ambati

University of Kentucky Doctoral Dissertations

This dissertation presents studies of the synthetic processes and applications of siloxane-based materials. Kinetic investigations of bridged organoalkoxysilanes that are precursors to organic-inorganic hybrid polysilsesquioxanes are a primary focus. Quick gelation despite extensive cyclization is found during the polymerization of bridged silane precursors except for silanes with certain short bridges. This work is an attempt to characterize and understand some of the distinct features of bridged silanes using experimental characterization, kinetic modeling and simulation. In addition to this, the dissertation shows how the properties of siloxane- materials can be engineered for drug delivery and adsorption.

The phase behavior of polymerizing …

Solution Phase And Membrane Immobilized Iron-Based Free Radical Reactions: Fundamentals And Applications For Water Treatment, Scott Romak Lewis

University of Kentucky Doctoral Dissertations

Membrane-based separation processes have been used extensively for drinking water purification, wastewater treatment, and numerous other applications. Reactive membranes synthesized through functionalization of the membrane pores offer enhanced reactivity due to increased surface area at the polymer-solution interface and low diffusion limitations. Oxidative techniques utilizing free radicals have proven effective for both the destruction of toxic organics and non-environmental applications. Most previous work focuses on reactions in the homogeneous phase; however, the immobilization of reactants in membrane pores offers several advantages. The use of polyanions immobilized in a membrane or chelates in solution prevents ferric hydroxide precipitation at near-neutral pH, …

Scaling Properties At Freeze-Out In Relativistic Heavy-Ion Collisions, M. M. Aggarwal, Z. Ahammed, A. V. Alakhverdyants, I. Alekseev, J. Alford, B. D. Anderson, S. Bueltmann, I. Koralt, D. Plyku, Star Collaboration

Physics Faculty Publications

Identified charged pion, kaon, and proton spectra are used to explore the system size dependence of bulk freeze-out properties in Cu+Cu collisions at √sNN=200 and 62.4 GeV. The data are studied with hydrodynamically motivated blast-wave and statistical model frameworks in order to characterize the freeze-out properties of the system. The dependence of freeze-out parameters on beam energy and collision centrality is discussed. Using the existing results from Au + Au and pp collisions, the dependence of freeze-out parameters on the system size is also explored. This multidimensional systematic study furthers our understanding of the QCD phase diagram revealing the importance …

Surface Modification Of Micro-Fluidic Devices, Zhan Gao

Doctoral Dissertations

"The surface modification, fabrication and characterization of microfluidic sensor systems for oxygen and glucose measurements with the use of polymeric materials were investigated in this dissertation. This dissertation is prepared in publication format. The first manuscript focuses on the surface modification of SU -8 layer to enhance the wettability. The improvement of wettability is critical since biofouling can be minimized during bioanalysis. A novel in situ photopattemable grafting technology was used to attach biocompatible polymer layers on SU-8 surface, changing its property from hydrophobicity to hydrophilicity. The results were confirmed by contact angle measurement and Fourier Transform Infrared (FTIR) spectra. …

Enhanced Heavy Oil Recovery By Alkali-Surfactant In The Pennsylvania Warner Sandstone, Rabia Mohamed Hunky

Doctoral Dissertations

"In this research, a study of the non-thermal method of alkaline-surfactant (AS) flooding to enhance heavy oil recovery from the Pennsylvanian Warner sandstone reservoir in Western Missouri was conducted. This work includ [sic] testing approximately 30 commercial surfactants and using a heavy oil sample with an API of 17. It was found that a number of surfactants could create stable emulsions. The viscosity of heavy oil could be reduced from 18,518 cp to 2.5 cp at 25⁰C through emulsification of certain surfactants. One of the major findings was that the emulsion created by the commercial surfactant, Igepalʼ CO-530 was stable …

Effect Of Hydrophobicity And Surface Roughness On Two-Phase Flow In Rectangular Microchannels, Gautham C. Unni

Doctoral Dissertations

"Two-phase flows in microchannels have received significant attention recently, and have become the cornerstone of numerous microfluidic devices. Microscale devices used for bioengineering applications, oil recovery, and chemical and catalytic microreactor applications involve the transport of bubbles in confined fluidic networks in channels of micrometer length scale. These types of two-phase flows result in pressure variations, leading to an overall increase in pressure drop. Among various flow parameters, pressure drop is extensively used in design of microfluidic devices. There are several parameters that affect the pressure drop across two-phase flow in microchannels. In the present study, the goal is to …

Biodegradable Polymer/Clay Nanocomposites Based On Poly(Butylene Adipate-Co-Terephthalate) And Polylactide, Mahin Shahlari

Doctoral Dissertations

"In offering a scientifically succinct methodology which leads to property-enhanced biodegradable polymer products for broader application, as well as in promoting the use of bio-sourced renewable polymers such as Polylactide (PLA) in biodegradable polymers with desirable properties from petroleum based polymers such as PBAT, this study and its results both directly and indirectly contribute to the technological solutions that address growing environmental and energy problems caused by the increased use of and reliance upon nondegradable, nonrenewable, petroleum-based plastics. This work studied blends of PBAT and PLA compounded with organoclay through direct melt mixing in a twin-screw extruder and a batch …

Strength Adjustable Preformed Particle Gels For Conformance Control, Jia Zhou

Doctoral Dissertations

"Reservoir heterogeneity and early water breakthrough (also known as fingering) represent two of the greatest challenges to recover crude oil efficiently. Gel treatments have been implemented as a cost-effective method to plug high permeability zones and thus improve sweep efficiency in reservoirs. However, when extensive cross-flows exist between formation layers, gel treatments become less efficient. Polymer was used in polymer flooding to increase the viscosity of the injected fluids and to correct the fingering problem. However, such treatment may be uneconomical since dramatic viscosity loss (80-90%) is caused by shearing degradation during the injection process near the wellbore.

This research …

Evaluation Of The Physicochemical Properties And Stability Of Solid Lipid Nanoparticles Designed For The Delivery Of Dexamethasone To Tumors, Melissa Howard

University of Kentucky Doctoral Dissertations

Pre-clinical and clinical trials suggest that pre-treatment with dexamethasone (Dex) may facilitate enhanced uptake of subsequently administered chemotherapeutic agents. To reduce the side effects associated with systemic administration of Dex, solid lipid nanoparticles (SLNs) containing dexamethasone palmitate (Dex-P) were prepared as a means of achieving tumor-targeted drug delivery. These studies were aimed at evaluating the physicochemical properties and both the physiological and storage stability of the SLNs.

SLNs were prepared using nanotemplate engineering technology. Stearyl alcohol (SA) was used as the lipid phase with Brij^® 78 and Polysorbate 60 as surfactants and PEG6000 monostearate as a long-chain PEGylating agent. …

Photocatalytic Destruction Of Halogenated Organic Compounds In Water With A New Photocatalyst, Mabruka Hadidan

Open Access Theses & Dissertations

In this research, a newly developed high surface area semiconductor porous material was synthesized from potassium titanium niobium mixed oxide (KTiNbO5) to be used as a photo catalyst in the presence of UV light to degrade halogenated organic compounds in water. The goal of the project was to investigate the catalytic activity of the material for its effectiveness in the degradation of the halogenated organic compounds, and it is the first investigation of this new photocatalyst with halogenated compounds. Model compounds dichloromethane, 1-chlorobutane, chlorobenzene, and trifluoroacetic acid in aqueous solutions were tested with the photocatalyst under ultraviolet light irradiation, using …

Implications Of Surface Runoff Recharge In Semi-Arid Regions On Groundwater Sustainability, Omar M. Al-Qudah

Open Access Theses & Dissertations

Amargosa Desert, Nevada regional groundwater studies show that the surface runoff infiltration occurring in the arroyos following runoff producing storms, and this infiltration is considered to be a major source of groundwater recharge. Groundwater infiltration through alluvium was investigated in the Amargosa Desert using borehole drill cuttings, groundwater chemistry, and applying a novel method for collecting runoff water. The sampling process included sediment, precipitation, and runoff water. In total, 176 runoff, 182 sediment, and 45 precipitation samples were collected between January, 2009 and January, 2011.Water chemistry, chloride concentrations, and stable isotopes of water collected from specially designed runoff samplers, placed …

Effect Of Particle Size And Trench Configuration On Deposition From Fine Coal Flyash Near Film Cooling Holes, Weiguo Ai, Robert G. Laycock, Devin Rappleye, Thomas H. Fletcher

Faculty Publications

Particulate deposition experiments were performed in a turbine accelerated deposition facility to examine the effects of flyash particle size and trench configuration on deposits near film cooling holes. Deposition on two bare metal Inconel coupons was studied, with hole spacings (s/d) of 3.4 and 4.5. Two sizes of sub-bituminous coal ash particles were used, with mass mean diameter of 4 and 13 μm, respectively. The effect of a cooling trench at the exit of the cooling holes was also examined in this deposition facility. Experiments were performed at different angles of impaction. Particles were accelerated to a combustor exit flow …

Coal Swelling Model For High Heating Rate Pyrolysis Applications, Randy C. Shurtz, Kolbein K. Kolste, Thomas H. Fletcher

Faculty Publications

Thermal swelling of coal during pyrolysis strongly influences combustion and gasification rates. Coal swelling is known to vary strongly with coal rank, heating rate, and total pressure. New experiments confirm and clarify previous observations that maximum swelling occurs for high-rank bituminous coals at heating rates slightly below 10⁴ K/s. Advanced swelling models based on bubble physics yield good qualitative trends at low heating rates, but they fail to predict observed decreases in coal swelling as particle heating rates increase beyond 10⁴ K/s. An empirical swelling correlation for computational fluid dynamics (CFD) applications that correctly describes experimentally observed trends …

The Effects Of Wind On The Flame Characteristics Of Individual Leaves, Wesley J. Cole, Mckaye H. Dennis, Thomas H. Fletcher, David R. Weise

Faculty Publications

Individual cuttings from five shrub species were burned over a flat-flame burner under wind conditions of 0.75–2.80m s^-1. Both live and dead cuttings were used. These included single leaves from broadleaf species as well as 3 to 5 cm-long branches from coniferous and small broadleaf species. Flame angles and flame lengths were determined by semi-automated measurements of video images. Additional data, such as times and temperatures corresponding to ignition, maximum flame height and burnout were determined using video and infrared images. Flame angles correlated linearly with wind velocity. They also correlated with the Froude number when either the …

Investigation On Water-Borne Intumescent Fire Protective Coatings For Steel., Yew Ming Chian

Student Works (2010-2019)

This research studies the efficiency of different water-borne intumescent formulations which incorporate chicken eggshell (CES) as a novel bio-filler, designed to protect steel in the event of a fire. The coating is based on these three flame-retardant additives: ammonium polyphosphate phase II, melamine and pentaerythritol (combination referred to as AMP). CES, silica fume (SF) and epoxy emulsion were incorporated either individually or in combination into the flame-retardant additives. The first part of the study develops and evaluates AMP, AMP+SF and AMP+SF+CES intumescent formulation systems, respectively. The best formulation produced was the AMP+SF+CES system which was subsequently selected for the next …

Flotation Circuit Performance Determination Using Size By Size Recovery – Case Of Bulyanhulu Gold Mine, Savinus Maronga

Tanzania Journal of Engineering and Technology (TJET)

The Bulyanhulu rougher flotation circuit performance has been determined by establishing the performance of individual cells. Direct sampling was done on all the rougher cell input, output and size analysis was performed on the samples with material in each size fraction assayed for copper and gold to determine their recoveries. It was observed that the performance of rougher cell number 3 and 4 was poor compared to other cells especially for finer particles below 53 µm where the recoveries were below 60%. In the last two flotation cells recoveries of both metals was very good (above 90%) in all particle …

An Integrated Approach For Phytate Degradation And Recovery Of Myo-Inositol And Phosphate As Valued-Added Products From The By-Products Of Corn Ethanol Industry, Jun Dang

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

An integrated process was developed to hydrolyze the phytates in light steep water (LSW) and to simultaneously isolate inorganic phosphate (Pi) and myo-inositol products. The proposed integrated process is helpful in resolving the environmental and nutritional concerns in the use of corn gluten feed (CGF) in the animal diets. This process comprised of partial and total hydrolysis of LSW and intermediate anion exchange separation technique. The phytates in LSW were initially degraded to negatively charged myo-inositol phosphates (InsP₂ - InsP₅). The optimized experimental parameters for the partial hydrolysis of LSW were determined to be 2 h hydrolysis …

Purification Of Synthetic Oligomers, Shiyue Fang

Michigan Tech Patents

This invention provides a novel method for purifying synthetic oligomers comprising capping, polymerizing and separating any failure sequences produced during oligomer synthesis. Either the failure sequence or the full-length oligomer may be polymerized. Optionally, small molecule impurities may also be incorporated into the polymerized material. The invention provides novel capping agents having a polymerizable functional group. The invention also provides kits comprising at least one composition of the present invention.