Engineering Commons^™

Materials Education And Research In Art And Design: A New Role For Libraries (Survey Stats), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Program Sheet), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Program Booklet), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Education And Research In Art And Design: A New Role For Libraries (Website), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

No abstract provided.

Materials Collection Creation And Administration: A New Role For Libraries (White Paper), Mark Pompelia

Materials Education and Research in Art and Design: A New Role for Libraries

The Problem/Opportunity: To define, identify, and guide design-based materials collections in academic settings and foster community among those with existing collections and/or those considering creating and supporting one.

Contents and topics:

1. What is a materials collection?
2. Why have a materials collection?
3. Acquisition strategies
4. Organizational approaches
5. Programming possibilities
6. Symposium summary
7. Resources

Poly(N-Isopropylacrylamide)-Based Scaffolds For Tissue Engineering Applications, Pamela Kubinski

Theses and Dissertations

The primary goal of this work is to investigate the potential of poly(Nisopropylacrylamide)- based scaffolds in tissue engineering applications, specifically spinal injury and nucleus pulposus replacement. Poly(N-isopropylacrylamide), denoted PNIPAAm, is a synthetic polymer with hydrophilic properties at room temperature, but above 32C the chains become hydrophobic and entangle to form physical crosslinks. This thermoresponsive property enables PNIPAAm to be implanted as a free-flowing solution at room temperature and collapse into a gel in physiological conditions. However, as a homopolymer, the hydrophobicity of PNIPAAm in vivo causes the hydrogel to expel water and exhibit inelastic properties that do not mimic those …

Ramjet Combustion Chamber, Paul Cameron Stone

Aerospace Engineering

A ramjet combustion chamber is designed and some initial assembly fabrication and test completed as a component of a ramjet graduate project for California Polytechnic State University, San Luis Obispo Supersonic Wind Tunnel. The combustor design is driven by a theoretical model created by a Cal Poly graduate student, Harrison Sykes. Temperature, pressure, and fuel flow will be measured.

Development Of A High Precision Quantum Dot Synthysis Method Utilizing A Microfluidic Reactor And In-Line Fluorescence Cell, Harry Lafferty, Jonny Hoadley

Materials Engineering

Quantum dots show great potential for use as spectral converters in solar cells, lighting applications and biological imaging. These applications require precise control of quantum dot size to maximize performance. The fluorescence profile of quantum dots in solution correlates directly with particle size. An alternative, high precision process was developed for the synthesis of cadmium-selenide quantum dots using a microfluidic reactor and fluorescence flow through cell. The process required creating separate cadmium and selenium precursors that were then mixed in a nitrogen environment at 17± 1°C. Using an NE-300^® syringe pump, the solution was pumped through a microfluidic reactor …

Advanced Deepwater Monitoring System, David Brower, John Hedengren, Reza Asgharzadeh Shishavan, Alexis Brower

Faculty Publications

This study investigates new methods to improve deepwater monitoring and addresses installation of advanced sensors on ”already deployed” risers, flowlines, trees, and other deepwater devices. A major shortcoming of post installed monitoring systems in subsea is poor coupling between the sensor and structure. This study provided methods to overcome this problem. Both field testing in subsea environments and laboratory testing were performed. Test articles included actual flowline pipe and steel catenary risers up to twenty-four inches in diameter. A monitoring device resulting from this study can be installed in-situ on underwater structures and could enhance productivity and improve safety of …

Utilization Of Wet Corn Distillers Grain For The Production Of Cellulase Enzymes And Value Added Products, Hunter R. Flodman

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Distillers grain, a byproduct from the dry grind corn ethanol industry, is an industrially available, abundant, preprocessed material comprised primarily of cellulose, hemicellulose, protein, oil, and minerals. This research investigated the utilization of distillers grain as a substrate for solid-state fermentation (SSF). SSF is the growth of microorganisms on a moist, solid substrate in the absence of free water. The substrate acts as both the nutrient source and as a solid support for the microorganisms, typically filamentous fungi. SSF has the unique ability to convert agricultural byproducts into valuable bioproducts such as enzymes and organic acids without hydrolyzing polysaccharides to …

Enzymatic Production Of Biodiesel From Fats Extracted From Lamb Meat Using Supercritical Co2, Hanifa Easa Taher

Theses

Due to the reduction in fossil fuel reserves and associated environmental impacts from using petroleum fuels, biodiesel has been presented as a feasible alternative because it is sustainable and environmentally friendly. In this study, it is proposed to investigate the feasibility of enzymatic production of biodiesel from waste animal fats using supercritical fluid technology for the extraction and reaction. The operating conditions that resulted in the optimum extraction and biodiesel production yield were identified. To the best of my knowledge of the investigators, the waste animal fat extracted by supercritical CO₂ (SC-CO₂) for the production of biodiesel …

Characterisation Of Ga2o3-Na2o-Cao-Zno- Sio2 Bioactive Glasses, A. W. Wren, T. Keenan, A. Coughlan, F. R. Laffir, D. Boyd, Mark R. Towler, M. M. Hall

Chemical and Biochemical Engineering Faculty Research & Creative Works

The structural role of Gallium (Ga) is investigated when substituted for Zinc (Zn) in a 0.42SiO₂-0.40-xZnO-0.10Na₂O-0.08CaO glass series, (where x = 0.08). Each starting material was amorphous, and the network connectivity (NC) was calculated assuming Ga acts as both a network modifier (1.23), and also as a network former. Assuming a network forming role for Ga the NC increased with increasing Ga concentration throughout the glass series (Control 1.23, TGa-1 2.32 and TGa-2 3.00). X-ray photoelectron spectroscopy confirmed both composition and correlated NC predictions. Raman spectroscopy was employed to investigate Q-structure and found that a shift …

The Effect Of Nanoclays On The Properties Of Aspirin Modified Enteric Polymer Prepared By Hot-Melt Mixing, Nonjaros Chomcharn

Dissertations

Melt mixing in batch equipment or continuous extruders is a technique that recently gained the attention of the pharmaceutical industry. This dissertation investigates two controlled-release drug delivery systems. The first system, namely the enteric matrix, contains an active pharmaceutical ingredient (API) and plasticizer in an enteric polymer while in the second system a nanoclay is added to the enteric matrix, to produce a polymer nanocomposite. The first system employs hot-melt mixing to prepare a modified enteric matrix, as a delayed-release dosage form. Different concentrations of aspirin (ASP) ranging from 10 – 30% w/w are melt-mixed with a plasticized Eudragit® …

Reaction Mechanisms Of Hydrocarbon And Mercury Systems In The Atmosphere And In Combustion: A Theoretical Study Of Thermochemical And Kinetic Properties, Itsaso Auzmendi Murua

Dissertations

The continuing increase in the world population and the rapidly changing lifestyle and education of this population projects significant increases in energy requirements. Global warming is a worldwide major concern with a very serious potential stress on our climate threatening major changes to the environment. It is, without question, of major importance to improve the efficiency and optimize the current available combustion processes and fuel sources, to develop alternative fuels and to reduce the emissions of toxic pollutants.

The objective of this dissertation is to present thermochemical, kinetic and modeling results on two reference fuels (the land vehicle fuel isooctane …

Metal Based Reactive Nanocomposites Prepared By Cryomilling, Shasha Zhang

Dissertations

Aluminum is one of the most commonly used metal fuel additives for propellants, explosives, and pyrotechnics. Recent interest has been focused on replacements for aluminum as fuel additives to achieve higher combustion temperatures and stronger pressure pulses for applications in advanced munitions systems. Two applications are addressed in this work. In the applications for explosives designed to defeat stockpiles of chemical and biological weapons, it is of interest to develop multifunctional materials combining the high energy density of metal fuels with the biocidal activity of halogens. A challenge of this effort is to design and prepare powder-like Al-I2 materials which …

Methane Partial Oxidation Over Phthalocyanine Catalyst, Yuan Zhu

Theses

The partial oxidation reaction of methane over a zeolite-supported ruthenium phthalocyanine catalyst is studied in a packed bed reactor. The investigation of such reaction is desirable because partial oxidation of methane yields a synthesis gas that can be upgraded to liquid chemicals and fuels.

Reactants of this study are He-diluted CH₄ and O₂. The effluent includes unreacted CH₄ and O₂, He, CO, CO₂, H₂, and H₂O vapor. Thermal conductivity gas chromatography is applied to identify the mole fractions of reactants and products. System pressure is maintained at 50 …

Hollow Fiber Membrane-Based Air Gap Membrane Distillation, Xuan Wang

Theses

Membrane Distillation (MD) is a thermally-driven separation process. In this research, desalination of 1 % NaCl solution is achieved by one type of MD namely, Air Gap Membrane Distillation (AGMD). The characteristics of AGMD are evaluated by using a hollow-fiber-set-based compact device. Hot brine solution and cold water are passed through two different fiber sets separately: porous hydrophobic polyvinylidene fluoride hollow fibers of the E type (PVDF E) and solid polypropylene (PP) hollow fibers. Vapor from the hot brine crosses the membrane pores of the PVDF fibers and the air gap, and finally condenses over the surface of solid hollow …

Batch Foaming Of Hot Melt Extruded Excipient/Disintegrant/Api Pharmaceutical Formulations And The Study Of The Effects Of The Resulting Cellular Structures On Api Dissolution, Na Yao

Theses

This thesis focuses on the impact of a disintegrant included in a foamed immediate release system composed of a polymer excipient and an Active Pharmaceutical Ingredient (API). Indomethacin (INM) is used as model API; Eudragit® EPO (EPO) is used as polymer excipient; AcDiSol and Crospovidone (Cros) are used as two kinds of disintegrant. The main objectives are to gain an understanding of the resulting morphologies, as well as the impact of disintegrants on drug release from foamed polymeric matrices.

In the first part of this research, the Hot Melt Extrusion (HME) process is used to compound the following pharmaceutical formulations: …

Effect Of Tablet Compression On The Dissolution Of Aspirin Tablets Using A Novel Off-Center Paddle Impeller (Opi) Dissolution Testing System, Chuan Sun

Theses

In the pharmaceutical industry, dissolution testing is routinely carried out to determine the dissolution rate of oral solid dosage forms. Among several testing devices, the USP Dissolution Apparatus 2 is the device most commonly used. However, despite its widespread use, this apparatus has been shown to produce test failures and to be very sensitive to a number of small geometry changes.

The objective of this study was to determine whether a novel dissolution system termed “OPI” for “off-center paddle impeller” was sensitive enough to determine differences in tablet dissolution profiles caused by different compression pressure during the tablet manufacturing process. …

Dissolution Of Different Commercial Aspirin Tablets Using A Novel Off-Center Paddle Impeller (Opi) Dissolution Testing System, Yang Qu

Theses

Dissolution testing is routinely conducted in the pharmaceutical industry to provide in vitro drug release information for quality control purposes. The most common dissolution testing system for solid dosage forms is the United States Pharmacopeia (USP) Dissolution Testing Apparatus 2. In this work, a modified Apparatus 2, termed "OPI" System for "off-center paddle impeller," in which the impeller is placed 8 mm off center in the vessel is tested to determine its sensitivity to differentiate between the dissolution profiles of differently formulated and manufactured tablets. Dissolution tests are conducted with both the OPI System and the Standard System using three …

Qsar Modeling Of Chemical Penetration Enhancers Using Novel Replacement Algorithms, Hui Qiu

Theses

The applications of transdermal delivery are limited because of the resistance of the skin to drug diffusion. Only potent drugs, with molecular weight less than 500 Da, are suitable to cross the skin barrier. Chemical Penetration Enhancers (CPEs) are used to promote the absorption of solutes across the dermal layers. In this investigation, a Quantitative Structure-Activity Relationship (QSAR) model is applied to relate chemical penetration enhancer structures with the flux enhancement ratio through a statistical approach.

A database, consisting of 61 non-polar CPEs, is selected for the study. Each compound is represented by 777 QSAR descriptors, which encode the physical …

Effects Of Api Particle Size On The Dissolution Rate In Molten Polymer Excipient Matrices During Hot Melt Extrusion, Conducted In A Co-Rotating Twin-Screw Extruder, Meng Li

Theses

The effect of the Active Pharmaceutical Ingredient (API) particle size on the dissolution rate in the polymer excipient during hot melt extrusion is investigated using a co-rotating twin-screw extruder with three different screw configurations. Acetaminophen (APAP) and amphiphilic polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (PVCap-PVAc-PEG) (Soluplus) are chosen as the model API and water- soluble polymer excipient, respectively. APAP is milled using a fluid energy mill (FEM) into two different particle sizes. The thermal properties of processed samples are characterized by TGA and DSC. SEM and optical microscopy are also used in the morphological studies. Under quiescent conditions, API particles …

Engineering Spores To Display G Protein-Coupled Receptors For Directed Evolution, Alyssa Misoo Kim

Theses

All human cells are surrounded by a plasma membrane made from a phospholipid bilayer, which is responsible for maintaining a biologically active species, while stopping entry of deleterious substances from the outside. G protein-coupled receptors (GPCRs) are the membrane proteins, which transmit signals across the cell membrane. GPCRs are involved in almost every physiological process, and irregular control leads to pathological conditions. Therefore, they are major drug targets. Crystal structure determination is required to understand the molecular details of activation/deactivation. However, GPCRs are difficult to crystallize because of stability issues. An efficient protein engineering system needs to be developed. The …

Production Of Stable Bcs Class Ii Drug Suspensions By Melt Emulsification And Subsequent Incorporation Into Polymer Strip Films, Emanuel Joseph Vizzotti

Theses

One of the ways to improve the dissolution rate of poorly water-soluble drugs is to produce fine drug particles with increased surface area. This increase will lead to bioavailability enhancement. However, smaller drug particles are thermodynamically unstable and tend to aggregate or grow. Therefore, proper formulation and process parameters must be chosen to keep the particles small. In this study, fine drug particles of two model drugs, fenofibrate and ibuprofen, are prepared by the melt emulsification technique. The influence of suspension formulation (i.e., the inclusion of polymers and surface-active agents) on particle stability is investigated. Moreover, different agitation techniques during …

Heterogeneous Combustion Of Condensed Particles In Transition Regime, Deniz Yildiz

Theses

A steady-state model of heterogeneous combustion for a spherical particle is developed accounting for the transition regime of heat and mass transfer. The model assumes formation of condensed products and reaction rate controlled by the transport of oxidizer to the particle surface. The model is based on the Fuchs’ limiting sphere approach. Calculations are performed for combustion of zirconium particles of different sizes. Temperature and oxygen concentration profiles are calculated and compared to those predicted by the continuous medium transfer model. It is shown that for particles in the range from 100 nm up to 30 gm heat and mass …

Power Dissipation And Mixing Time In A Partially Filled Pharmaceutical Reactor Equipped With A Retreat-Blade Impeller At Different Fill Ratios, Aniruddha Banerjee

Theses

Glass-lined, stirred reactors and tanks are of significant industrial importance, especially in the pharmaceutical and fine chemical industries. These reactors are manufactured with a “glass-lining,” i.e., a glass layer applied to the agitator, the inside of the reactor/tank and to any of the surfaces in contact with its contents in order to maximize corrosion resistance, facilitate reactor cleaning, and minimize product contamination. Because of glass-lining fabrication issues, a retreat blade impeller with a low impeller clearance off the tank bottom is commonly used in glass-lined reactors. In addition, since wall baffles cannot be easily mounted on the wall of glass-lining …

Hydrodynamic Effects Of A Cannula In A Usp Dissolution Testing Apparatus 2, Qianqian Liu

Theses

Dissolution testing is routinely used in the pharmaceutical industry to provide in vitro drug release information for drug development and quality control purposes. The USP Testing Apparatus 2 is the most common dissolution testing system for solid dosage forms. Usually, sampling cannulas are used to take samples manually from the dissolution medium. However, the inserted cannula can alter the normal fluid flow within the vessel and produce different dissolution testing results.

The hydrodynamic effects introduced by a permanently inserted cannula in a USP Dissolution Testing Apparatus 2 were evaluated by two approaches. Firstly, the dissolution tests were conducted with two …

Increasing Round Trip Efficiency Of Hybrid Li-Air Battery With Bifunctional Catalysts, Kan Huang, Yunfeng Li, Yangchuan Xing

Chemical and Biochemical Engineering Faculty Research & Creative Works

Previously it was shown that Pt as cathode catalyst has a large overpotential during charge in rechargeable hybrid Li-air battery with sulfuric acid catholyte. This article demonstrates that a bifunctional catalyst composed of Pt and IrO2 supported on carbon nanotubes can address this problem. The specially designed and synthesized bifunctional catalyst showed significant overpotential reduction and achieved a round-trip energy efficiency of 81% after 10 cycles, higher than many achieved in aprotic Li-O2 batteries. The hybrid Li-air battery was discharged and recharged for 20 cycles at 0.2 mA/cm2, showing a fairly stable cell performance. A specific capacity of 306 mAh/g …

Extension Of Dna In A Nanochannel As A Rod-To-Coil Transition, Douglas R. Tree, Yanwei Wang, Kevin D. Dorfman

Faculty Publications

DNA confinement in nanochannels is emerging as an important tool for genomics and an excellent platform for testing the theories of confined wormlike polymers. Using cutting-edge, large scale Monte Carlo simulations of asymptotically long wormlike chains, we show that, in analogy to the rod-to-coil transition for free wormlike polymers, there exists a universal, Gauss–de Gennes regime that connects the classic Odijk and de Gennes regimes of channel-confined chains. For DNA in a nanochannel, this Gauss–de Gennes regime spans practically the entire experimentally relevant range of channel sizes, including the nanochannels used in an incipient genome mapping technology.

Hollow Fiber Module For Continuous Ethanol Fermentation, Leia M. Dwyer

Honors Scholar Theses

Continuous processes have several advantages over their batch counterparts and are prevalent across the chemical engineering industry today. The process of brewing beer, however, remains a batch process. Transforming the brewing process into a continuous process could have many advantages including lowered process down-time, increased profits, and higher product homogeneity. This project looked into several aspects of the brewing process to gain insight into the potential for continuous ethanol fermentation. First, a kinetic model was developed for the enzymatic breakdown of starch to simple sugars in the production of wort from malted barley. Next, the growth kinetics of brewer’s yeast, …