Engineering Commons^™

General Method To Predict Voltage-Dependent Ionic Conduction In A Solid Electrolyte Coating On Electrodes, Jie Pan, Yang-Tse Cheng, Yue Qi

Chemical and Materials Engineering Faculty Publications

Understanding the ionic conduction in solid electrolytes in contact with electrodes is vitally important to many applications, such as lithium ion batteries. The problem is complex because both the internal properties of the materials (e.g., electronic structure) and the characteristics of the externally contacting phases (e.g., voltage of the electrode) affect defect formation and transport. In this paper, we developed a method based on density functional theory to study the physics of defects in a solid electrolyte in equilibrium with an external environment. This method was then applied to predict the ionic conduction in lithium fluoride (LiF), in contact with …

Group Decisions In Value Management, Christiono Utomo, Farida Murti, Arazi Idrus

Makara Journal of Technology

This research deals with a technique to expedite group decision making during the selection of technical solutions for value management process. Selection of a solution from a set of alternatives is facilitated by evaluating using multicriteria decision making techniques. During the process, every possible solution is rated on criteria of function and cost. Function deals more with quality than with quantity, and cost can be calculated based on the theoretical time value of money. Decision-making techniques based on satisfying games are applied to determine the relative function and cost of solutions and hence their relative value. The functions were determined …

Dosi In Novel Geometry Dishes, Jonathan Lawrence Lambert Jones

Electronic Theses and Dissertations

Effects of hemodynamic forces on cellular response are well studied. Wall shear stress is regularly accepted as the primary hemodynamic force affecting cellular response. Hemodynamic forces studies utilize Petri dishes on orbital shakers to grow cells for the experiments since this is an easily scalable system. However, characterizing the hemodynamics is difficult since the oscillatory swirling motion creates multidirectional and variable magnitude shear throughout the dish. Thus, a novel geometry dish that could create uniaxial shear with less variation in magnitude would be advantageous for studying shear stress effects on cellular response. The purpose of this thesis was to explore …

Fiber Optic Ring Resonator Sensor Detection Technique Based On Spectral Intensity Integration, Purnomo Sidi Priambodo, Sasono Rahardjo, Gunawan Witjaksono, Djoko Hartanto

Makara Journal of Technology

Resonant field phenomenon in optical ring resonator has been a major theme for various studies and can be used for various sensor applications. The spectral response shape changes are subjects to be discussed and analyzed for detection in optical sensor system. The spectral response changes are caused by various factors ranging from refractive index of the surrounding medium, medium loss due to absorption and scattering, and coupling variation between waveguides. These optical phenomena are mostly used for bio-sensor applications, since it is free from electromagnetic interference (EMI) and non-physically destructive. In this paper, we discuss our current research in developing …

Construction Of A Novel Method Of Measuring Thermal Conductivity For Nanostructures, Hiroya Ikeda, Shoma Yoshida, Yuhei Suzuki, Veerappan Manimuthu, Faiz Salleh, Fujio Kuwahara, Masaru Shimomura, Kenji Murakami

Makara Journal of Technology

With the aim of characterizing the thermal conduction in a nanometer-scaled materials, we have constructed a novel method on the basis of an ac calorimetric method. In this method, periodic sample heating is performed by light irradiation and the corresponding periodic temperature is detected by infrared irradiative thermometer. This makes us measure the thermal diffusivity out of contact with the objective sample. In the present study, we confirm to measure the thermal diffusivity of bulk Si and Cu by this non-contact method with halogen-lamp irradiation. In determining the thermal diffusivity from the relationship between distance deviation and delay time, the …

Seebeck Coefficient Of Soi Layer Induced By Phonon Transport, Faiz Salleh, Takuro Oda, Yuhei Suzuki, Yoshinari Kamakura, Hiroya Ikeda

Makara Journal of Technology

The Seebeck coefficient of a patterned Si wire on P-doped SOI (Si-on-insulator) layer with a carrier concentration of 1018 cm-3 was measured near room temperature. The Seebeck coefficient is found to be smaller than that in the SOI layer and to be closer to the calculated Seebeck coefficient including the electronic contribution. The decrease in the Seebeck coefficient of Si wire is likely to occur due to the elimination of the contribution of phonon drag part. From the theoretical calculation of scattering rates by considering the scattering processes in phonon system, it is considered that an increase in phonon-boundary scattering …

Phonon-Drag Contribution To Seebeck Coefficient Of Ge-On-Insulator Substrate Fabricated By Wafer Bonding Process, Veerappan Manimuthu, Shoma Yoshida, Yuhei Suzuki, Faiz Salleh, Mukannan Arivanandhan, Yoshinari Kamakura, Yasuhiro Hayakawa, Hiroya Ikeda

Makara Journal of Technology

In order to build high-sensitivity infrared photodetectors using SiGe nanowires, we investigate the thermoelectric characteristics of Ge-on-insulator (GOI) layers as a reference for SiGe. We fabricate p-type GOI substrates with an impurity concentration of 1016-1018cm-3 by a wafer-bonding process using Ge and oxidized Si wafers. Annealing treatment is performed in order to further increase the bonding strength of Ge/SiO2 interface. We measure the Seebeck coefficient in the temperature range of 290-350 K. The Seebeck coefficient of the GOI layers is very close to the theoretical value for Ge, calculated on the basis of carrier transport. Hence, there is a small …

The Effects Of The Types Of Milk (Cow, Goat, Soya) And Enzymes (Rennet, Papain, Bromelain) Toward Cheddar Cheese Production, Ariestya Arlene, Anastasia Prima Kristijarti, Ivana Ardelia

Makara Journal of Technology

The objectives of this research are to study the effects of different types of milk and enzymes toward the yield and quality (moisture, ash, protein, fat content, and texture) of cheddar cheese and the interaction between those two variables during the process. The types of milk are cow, goat, and soya milk, while the types of enzymes are rennet, papain, and bromelain enzymes. Regarding the procedure, the milk is first pasteurized before CaCl2 and Lactobacillus lactis that acts as the acidifier starter as much as 0.2% (w/v) and 0.5% of the milk volume are added respectively. The amount of enzyme …

Hazard-Driven Drivers’ Behaviours Towards Vehicle-To-Median Safe Distances, Martha Leni Siregar

Makara Journal of Technology

A median is required for a two-way road to separate traffic from opposing lanes and to prevent head-on collisions. However, studies indicate that medians are also perceived as hazards which need to be avoided during driving. This hazard perception is manifested in drivers’ changing behavior towards various types of medians along the driving lanes inform of their tendency to allow various safe distances to the medians. The Indonesian Highway Capacity Manual (IHCM) does not differentiate between types of medians and the influence on the drivers’ choice of safe margin to the medians. Therefore, this study looks into how the existence …

Energy And Exergy Analysis Of Kalina Cycle For The Utilization Of Waste Heat In Brine Water For Indonesian Geothermal Field, Nasruddin Nasruddin, Agus Noor Sidiq, Abdulmajeed Mohamad, Rama Usvika

Makara Journal of Technology

The utilization of waste heat in a power plant system—which would otherwise be released back to the environment—in order to produce additional power increases the efficiency of the system itself. The purpose of this study is to present an energy and exergy analysis of Kalina Cycle System (KCS) 11, which is proposed to be utilized to generate additional electric power from the waste heat contained in geothermal brine water available in the Lahendong Geothermal power plant site in North Sulawesi, Indonesia. A modeling application on energy and exergy system is used to study the design of thermal system which uses …

Nebulized Solvent Ablation Of Aligned Plla Fibers For The Study Of Neurite Response To Anisotropic-To-Isotropic Fiber/Film Transition (Afft) Boundaries In Astrocyte-Neuron Co-Cultures, Jonathan M. Zuidema, Gregory P. Desmond, Christopher J. Rivet, Kathryn R. Kearns, Deanna M. Thompson, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Developing robust invitro models of in vivo environments has the potential to reduce costs and bring new therapies from the bench top to the clinic more efficiently. This study aimed to develop a biomaterial platform capable of modeling isotropic-to-anisotropic cellular transitions observed in vivo, specifically focusing on changes in cellular organization following spinal cord injury. In order to accomplish this goal, nebulized solvent patterning of aligned, electro spun poly-. l-lactic acid (PLLA) fiber substrates were developed. This method produced a clear topographic transitional boundary between aligned PLLA fibers and an isotropic PLLA film region. Astrocytes were then seeded on these …

Optimization Of A Combined Approach For The Treatment Of Desalination Reject Brine And Capture Of Co₂, Ameera Fares Mohammad

Theses

Carbon dioxide (CO₂) is the most widespread greenhouse gas that traps heat and raises the global temperature, contributing to climate change. Existing techniques to sequester carbon dioxide have numerous environmental concerns and usually require an extensive amount of energy. New technologies and methods, such as reactions with desalination reject brine according to the Solvay process, offer new hope for the reduction of carbon dioxide concentration in the atmosphere. Brine management is another environmental concern, as many desalination plants need to find suitable approaches for the treatment or disposal of the large amounts of concentrated brine, resulting from the desalination processes. …

Characterization Of Plasticizer-Polymer Coatings For The Detection Of Benzene In Water Using Sh-Saw Devices, Jude Coompson

Master's Theses (2009 -)

Benzene is a constituent component of crude oil that has been classified as a carcinogen by the EPA with a maximum contamination level (MCL) of 5ppb in drinking water. However, of the aromatic compounds, benzene has one of the lowest polymer-water partition coefficients using commercially available polymers as sensor coatings, resulting in poor limits of detection. This work investigates new coating materials based on polymer/plasticizer mixtures coated onto a shear horizontal surface acoustic wave (SH-SAW) sensor to detect benzene in water. There are many polymers which are unavailable for use as a sensing polymer due to their glassy nature. The …

Development Of A Rapid Compression Controlled-Expansion Machine For Chemical Ignition Studies, John Neuman

Master's Theses (2009 -)

The ability to accurately model fuel combustion processes is essential to the development of transportation, power generation, and manufacturing technology. Models describing the kinetics of chemical oxidation are readily available and highly refined for a wide range of test fuels. However, these models still suffer from high levels of uncertainty under engine-relevant conditions, largely due to a lack of consistency between published validation data. An experimental testing apparatus, known as the Rapid Compression Controlled-Expansion Machine (RCCEM) has been designed and fabricated to conduct chemical kinetic studies. The RCCEM features a pneumatically-driven, custom-designed cam, which governs the volumetric compression and expansion …

Insights Into Ultrasonic Release From Eliposomes, Marjan Javadi, William G. Pitt

Faculty Publications

A novel nanosized liposomal carrier was prepared consisting of perfluorocarbon emulsion droplet(s) encapsulated inside a liposome, which is called an eLiposome. This 200-nm construct is useful for acoustically activated drug delivery because ultrasound causes the emulsion droplet to expand from liquid to gas, which expansion ruptures the eLiposome bilayer and releases the internal contents. This study focuses on the parameters that influence control of the release of calcein (a model drug), including ultrasound amplitude, insonation time, and perfluorocarbon vapor pressure as a function of temperature and composition. The results show that calcein release increases as the ultrasound amplitude or insonation …

Microfracture And Surfactant Impact On Linear Cocurrent Brine Imbibition In Gas-Saturated Shale, Yongpeng Sun, Baojun Bai, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

During and after hydraulic fracturing, fluid-shale interaction has a prominent impact on liquid retention and thus on gas phase permeability and gas productivity. By providing a low surface tension or wettability alteration, surfactants are widely used to decrease liquid retention after fracturing. To evaluate the liquid intake of a rock sample, an imbibition experiment is commonly used, especially when it is treated by a surfactant. However, conventional imbibition experiments with gas shale could not quantitate the imbibition behaviors as it does with conventional rocks because of the low porosity and extremely low permeability of gas shale. In this paper, a …

Effects Of Magnetic Nanoparticles And External Magnetostatic Field On The Bulk Heterojunction Polymer Solar Cells, Kai Wang, Chao Yi, Chang Liu, Xiaowen Hu, Steven Chuang, Xiong Gong

Polymer Science Faculty Research

The price of energy to separate tightly bound electron-hole pair (or charge-transfer state) and extract freely movable charges from low-mobility materials represents fundamental losses for many low-cost photovoltaic devices. In bulk heterojunction (BHJ) polymer solar cells (PSCs), approximately 50% of the total efficiency lost among all energy loss pathways is due to the photogenerated charge carrier recombination within PSCs and low charge carrier mobility of disordered organic materials. To address these issues, we introduce magnetic nanoparticles (MNPs) and orientate these MNPS within BHJ composite by an external magnetostatic field. Over 50% enhanced efficiency was observed from BHJ PSCs incorporated with …

Composition And Work Function Relationship In Os–Ru–W Ternary Alloys, Phillip D. Swartzentruber, Michael J. Detisch, Thomas John Balk

Chemical and Materials Engineering Faculty Publications

Os–Ru thin films with varying concentrations of W were sputter deposited in order to investigate their structure–property relationships. The films were analyzed with x-ray diffraction to investigate their crystal structures, and a Kelvin probe to investigate their work functions. An Os–Ru–W film with ∼30 at. % W yielded a work function maximum of approximately 5.38 eV. These results align well with other studies that found work function minima from thermionic emission data on M-type cathodes with varying amounts of W in the coatings. Furthermore, the results are consistent with other work explaining energy-level alignment and charge transfer of molecules on …

The Effect Of Microstructure On Transport Properties Of Porous Electrodes, Serena Wen Peterson

Theses and Dissertations

The goal of this work is to further understand the relationships between porous electrode microstructure and mass transport properties. This understanding allows us to predict and improve cell performance from fundamental principles. The investigated battery systems are the widely used rechargeable Li-ion battery and the non-rechargeable alkaline battery. This work includes three main contributions in the battery field listed below.

Direct Measurement of Effective Electronic Transport in Porous Li-ion Electrodes. An accurate assessment of the electronic conductivity of electrodes is necessary for understanding and optimizing battery performance. The bulk electronic conductivity of porous LiCoO2-based cathodes was measured as a …

Nonlinear Estimation And Control With Application To Upstream Processes, Reza Asgharzadeh Shishavan

Theses and Dissertations

Subsea development and production of hydrocarbons is challenging due to remote andharsh conditions. Recent technology development with high speed communication to subsea anddownhole equipment has created a new opportunity to both monitor and control abnormal or undesirableevents with a proactive and preventative approach rather than a reactive approach. Twospecific technology developments are high speed, long-distance fiber optic sensing for productionand completion systems and wired pipe for drilling communications. Both of these communicationsystems offer unprecedented high speed and accurate sensing of equipment and processes that aresusceptible to uncontrolled well situations, leaks, issues with flow assurance, structural integrity,and platform stability, as well …

Highly Porous Titania Films Coated On Sub-Micron Particles With Tunable Thickness By Molecular Layer Deposition In A Fluidized Bed Reactor, Rajankumar L. Patel, Ying Bing Jiang, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Titanium alkoxide (titanicone) thin films were coated on large quantities of sub-micron sized silica particles at 100 °C using molecular layer deposition (MLD) in a fluidized bed reactor. Titanium tetrachloride and ethylene glycol were used as precursors. The content of titanium on the particles increased linearly as the number of MLD coating cycles increased. The conformity of the films, with a thickness of ~12 nm, was verified using TEM for silica particles coated with 50 cycles of titanicone. The composition of the titan cone films was confirmed using energy dispersive X-ray spectrometry. Porous titanium oxide films were formed for the …

A Constitutive Model For Entangled Polymers Incorporating Binary Entanglement Pair Dynamics And A Configuration Dependent Friction Coefficient, David W. Mead, Nilanjana Banerjee, Joontaek Park

Chemical and Biochemical Engineering Faculty Research & Creative Works

Following recent work [e.g., J. Park et al., J. Rheol. 56, 1057-1082 (2012); T. Yaoita et al., Macromolecules 45, 2773-2782 (2012); and G. Ianniruberto et al., Macromolecules 45, 8058-8066 (2012)], we introduce the idea of a configuration dependent friction coefficient (CDFC) based on the relative orientation of Kuhn bonds of the test and surrounding matrix chains. We incorporate CDFC into the "toy" model of Mead et al. [Macromolecules 31, 7895-7914 (1998)] in a manner akin to Yaoita et al. [Nihon Reoroji Gakkaishi 42, 207-213 (2014)]. Additionally, we incorporate entanglement dynamics (ED) of discrete entanglement pairs into the new Mead-Banerjee-Park (MBP) …

Fabrication And Characterization Of Poly(Octanediol Citrate)/Gallium-Containing Bioglass Microcomposite Scaffolds, Ehsan Zeimaran, Sara Pourshahrestani, Belinda Pingguan-Murphy, Nahrizul Adib Kadri, Hussin A. Rothan, Rohana Yusof, Mark R. Towler, Ivan Djordjevic

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bone can be affected by osteosarcomae requiring surgical excision of the tumor as part of the treatment regime. Complete removal of cancerous cells is difficult and conventionally requires the removal of a margin of safety around the tumor to offer improved patient prognosis. This work considers a novel series of composite scaffolds based on poly (octanediol citrate) (POC) impregnated with gallium-based bioglass microparticles for possible incorporation into bone following tumor removal. The objective of this research was to fabricate and characterize these scaffolds and subsequently report on their mechanical and biological properties. The porous micro composite scaffolds with various concentrations …

A Glass Polyalkenoate Cement Carrier For Bone Morphogenetic Proteins, Adel M.F. Alhalawani, Omar Rodriguez, Declan J. Curran, Russell Co, Sean Kieran, Saad Arshad, Timothy J. Keenan, Anthony W. Wren, Gazelle Crasto, Sean A.F. Peel, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

This work considers a glass polyalkenoate cement (GPC)-based carrier for the effective delivery of bone morphogenetic proteins (BMPs) at an implantation site. A 0.12 CaO–0.04 SrO–0.36 ZnO–0.48 SiO₂ based glass and poly(acrylic acid) (PAA, Mw 213,000) were employed for the fabrication of the GPC. The media used for the water source in the GPC reaction was altered to produce a series of GPCs. The GPC liquid media was either 100 % distilled water with additions of albumin at 0, 2, 5 and 8 wt% of the glass content, 100 % formulation buffer (IFB), and 100 % BMP (150 µg …

Electrochemical Monitoring Of Cell Wall-Regulated Transient Extracellular Oxidative Burst From Single Plant Cells, Jun-Tao Liu, Yan-Ling Liu, Zhi Cheng, Shi-Jing Chen, Wei-Hua Huang

Journal of Electrochemistry

Oxidative burst by rapid, transient generation of reactive oxygen species (ROS) is a fundamental process for plant disease defense and signal transduction. ROS can be protective or toxic depending on their concentrations, and critical balance between ROS production and scavenging is regulated by complex and perfect mechanisms in plant cells. However, the process of rapid and transient ROS burst from plant cells and their regulatory mechanisms are far from being completely understood, owing to the methodological obstacles in real-time monitoring such a fast process. In this work, we showed the application of microelectrode electrochemistry with high spatiotemporal resolution to monitor …

An Enzymatic Ethanol/O2 Biofuel Cell Powered By Commercial Vodka Fuel, Yi-Ming Yan, Lan-Qun Mao

Journal of Electrochemistry

This study demonstrates the performance of a new type alcohol/O₂ biofuel cell assembled by using alcohol dehydrogenase (ADH) and bilirubin oxidase (BOD) as the biocatalysts of the bioanode and the biocathode for the bioelectrocatalytic oxidation of alcohol and reduction of oxygen, respectively. To construct the bioanode and the biocathode, single-walled carbon nanotubes (SWCNTs) were used. In the bioanode, SWCNTs were used as the supporting materials for both methylene green (MG) which was used as the electrocatalyst for the oxidation of NADH and ADH. The as-constructed MG/ADH/SWCNTs-based bioanode exhibits a good activity toward the bioelectrocatalytic oxidation of ethanol. In the …

Preparation And Properties Of Titanium Based Metal Oxide Electrodes For Ammonia Nitrogen Wastewater Treatment, Xue Li, Meng Xue, Ling Huang, Jun-Tao Li, Shi-Gang Sun

Journal of Electrochemistry

In this paper, four types of titanium based metal oxides electrodes were prepared by thermal decomposition method: Ti/SnO₂+Sb₂O₃, Ti/SnO₂+Sb₂O₃/SnO₂+IrO₂, Ti/SnO₂+Sb₂O₃/SnO₂+RuO₂, Ti/SnO₂+Sb₂O₃/SnO₂+CeO₂. The XRD results show that CeO₂ in Ti/SnO₂+Sb₂O₃/SnO₂+CeO₂ displayed a good crystal structure, and there was no significant oxygen evolution reaction occurred after electrolytic oxidation. Compared with the other three electrodes, the Ce-doped …

Naio4 Oxidation Of Mussel Adhesive Protein Film And Its Corrosion Protection For Mg-1.0ca Alloy, Rui-Qing Hou, Ping-Li Jiang, Shi-Gang Dong, Chang-Jian Lin

Journal of Electrochemistry

The effect of oxidation of mussel adhesive protein (Mefp-1) film on the corrosive resistance for Mg-1.0Ca alloy was investigated by scanning electron microscopy (SEM), atom force microscopy (AFM), electron probe microanalysis (EPMA), Infrared reflection absorption spectroscopy (IRAS) and electrochemical methods. The results showed that the NaIO₄ induced oxidation of the pre-formed Mefp-1 film with porous morphology involved structural change of the DOPA group in the protein and resulted in a more uniform film with net-like morphology. The protein film without oxidation had an increasing resistance for the corrosion of Mg-1.0Ca alloy up to 7 days exposure. After oxidation, Epit …

Heterogeneous Catalyst Deactivation And Regeneration: A Review, Morris D. Argyle, Calvin H. Bartholomew

Faculty Publications

Deactivation of heterogeneous catalysts is a ubiquitous problem that causes loss of catalytic rate with time. This review on deactivation and regeneration of heterogeneous catalysts classifies deactivation by type (chemical, thermal, and mechanical) and by mechanism (poisoning, fouling, thermal degradation, vapor formation, vapor-solid and solid-solid reactions, and attrition/crushing). The key features and considerations for each of these deactivation types is reviewed in detail with reference to the latest literature reports in these areas. Two case studies on the deactivation mechanisms of catalysts used for cobalt Fischer-Tropsch and selective catalytic reduction are considered to provide additional depth in the topics of …

Identification And Quantification Of Gaseous Organic Compounds Emitted From Biomass Burning Using Two-Dimensional Gas Chromatography–Time-Of-Flight Mass Spectrometry, Lindsay E. Hatch, Wentai Luo, James F. Pankow, Robert J. Yokelson, Chelsea E. Stockwell, Kelley Barsanti

Civil and Environmental Engineering Faculty Publications and Presentations

The current understanding of secondary organic aerosol (SOA) formation within biomass burning (BB) plumes is limited by the incomplete identification and quantification of the non-methane organic compounds (NMOCs) emitted from such fires. Gaseous organic compounds were collected on sorbent cartridges during laboratory burns as part of the fourth Fire Lab at Missoula Experiment (FLAME- 4) and analyzed by two-dimensional gas chromatography– time-of-flight mass spectrometry (GC × GC–ToFMS). The sensitivity and resolving power of GC × GC–ToFMS allowed the acquisition of the most extensive data set of BB NMOCs to date, with measurements for 708 positively or tentatively identified compounds. Estimated …