Engineering Commons^™

Design And Commissioning Of A Community Scale Solar Powered Membrane-Based Water Purification System In Haiti, Shavin Pinto, Yung Wong, Kyle Fennesy, Yan Tang, Marc Compere

Publications

This paper presents the design and commissioning of a solar powered water purification system at the Ryan Epps Home for Children (REHC) in Michaud, Haiti. This system supplies clean drinking water to the 200 children who live and go to school at REHC and also to the community in the form of a micro-business. This micro-business is the mechanism for income generation for sustainable system operation. The purifier uses a three stage filtration system with a disc-type sediment filter, a 0.1 micron ultrafiltration membrane, and an ultraviolet light for disinfection. The backwash cycle extends the life of the ultrafiltration membrane …

Modeling Of Rheological Properties For Entangled Polymer Systems, Nilanjana Banerjee

Doctoral Dissertations

"The study of entangled polymer rheology both in the field of medicine and polymer processing has their major importance. Mechanical properties of biomolecules are studied in order to better understand cellular behavior. Similarly, industrial processing of polymers needs thorough understanding of rheology so as to improve process techniques. Work in this dissertation has been organized into three major sections. Firstly, numerical/analytical models are reviewed for describing rheological properties and mechanical behaviors of cytoskeleton. The cytoskeleton models are classified into categories according to the length scales of the phenomena of interest. The main principles and characteristics of each model are summarized …

Iron Phosphide Nanostructures As An Efficient Bifunctional Catalysts For Water Splitting, Nikitaa Ashokan

Masters Theses

"The first part of this thesis work focuses on developing a bifunctional catalyst for electrochemical water splitting encompassing both oxygen and hydrogen evolution. A highly efficient catalyst is necessary to improve kinetics of the sluggish four electron process for oxygen evolution reaction (OER) and two-electron process for hydrogen evolution reaction (HER). Recently, transition metal phosphides have gained increasing interest in this field because of their good electrical conductivity properties as well as better catalytic activity. Many transition-metal phosphides are being considered for this application and iron phosphide (FeP) has proved to be a good HER catalyst. In this work, we …

Experimental Evaluations Of Selected Sealants To Remediate Co₂ Leakage, Aaron Jeffrey Blue

Masters Theses

"Carbon Dioxide (CO₂) sequestration into porous and permeable brine-filled aquifers is seen as one of the most feasible solutions for reducing the amount of greenhouse gases released into the atmosphere from coal-fired power plants. To safely store the CO₂, it must be trapped under an impermeable rock acting as a seal. One of the concerns with CO₂ sequestration is the generation of new fractures or reopening of existing fractures caused by CO₂ injection in the sealing formation. This project evaluates the potential of sealing these fractures by injecting sealing materials into them. These sealing …

Fluid Flow Through Deformation Band, Huining Zhang

Masters Theses

"Cataclastic deformation bands, which are common in porous sandstone, have the potential to restrict fluid flow. Geological studies have shown that permeability of deformation band shear zones can be one to five orders of magnitude less than for the sandstone host rock. However, recent studies based on simplified analytical estimates have shown that fluid flow in jointed deformation bands may not be retarded since joints play an important role in conducting fluids. In this study, 2 dimensional finite element analysis (FEA) is used to simulate the total discharge flow rate through jointed deformations. Variations of single planar and conjugate jointed …

Floating Constructed Wetland For The Treatment Of Polluted River Water: A Pilot Scale Study On Seasonal Variation And Shock Load, Tanveer Saeed, Biprojit Paul, Rumana Afrin,, Abdullah Al-Muyeed, Guangzhi Sun

Research outputs 2014 to 2021

This paper reports the performance of a pilot scale floating constructed wetland (FCW), employed for the treatment of polluted water collected from Buriganga river in Bangladesh. The FCW system included a tank for accommodating collected water and a floating mat with media, to support the growth of two macrophyte species Phragmites australis and Canna indica. Mean mass removal rates of 0.66, 0.76, 0.08, 0.51, 2.49g/m2d were achieved for ammoniacal nitrogen (NH4-N), total inorganic nitrogen (TIN), phosphorus (P), biochemical oxygen demand (BOD), chemical oxygen demand (COD), respectively by the FCW. Nitrogen removal was via nitrification-denitrification processes, whereas filtration-sedimentation appeared to influence …

X-Ray Protection, Surface Chemistry And Rheology Of Ball-Milled Submicron Gd2o3 Aqueous Suspension, Ly B. T. La, Yee-Kwong Leong, Christopher Leatherday, Pek I. Au, Kevin Hayward, Laichang Zhang

Research outputs 2014 to 2021

X-ray protective garments are typically comprised of lead-based materials, which are toxic to both people and the environment. Developing alternative lightweight radiation shielding materials is a priority for protecting people working with radiation. Gadolinium, with an electron configuration typical of radiation shielding elements, is proposed as a non-toxic replacement for lead. This study provides new insights into the potential for a gadolinium suspension for replacing lead and proposes an inexpensive and effective preparation method. Submicron gadolinium oxide (Gd₂O₃) was generated using a cost effective ball milling method involving addition of NaCl. Then, the dispersed-flocculated behaviour of …

Scale-Up Investigation And Hydrodynamics Study Of Gas-Solid Fluidized Bed Reactor Using Advanced Non-Invasive Measurement Techniques, Abdelsalam Efhaima

Doctoral Dissertations

"This research focuses on validating our newly developed mechanistic scale-up methodology for hydrodynamics similarity of gas-solid fluidized bed reactors (FBRs) by implementing our advanced non-invasive measurement techniques which are gamma ray computed tomography (CT) and radioactive particle tracking (RPT) that measure local hydrodynamic parameters. Experiments were carried out in two fluidized beds of 14 cm and 44 cm in diameter using air as the gas phase and particles of different materials. Since in these reactors the gas dynamic dictates the bed hydrodynamics, the new mechanistic scale-up methodology is based on maintaining similar or closer time averaged radial profiles of gas …

Design, Fabrication, Operation And Aspen Simulation Of Oil Shale Pyrolysis And Biomass Gasification Process Using A Moving Bed Downdraft Reactor, Hassan Golpour

Doctoral Dissertations

"Energy is the major facilitator of the modern life. Every developed and developing economy requires access to advanced sources of energy to support its growth and prosperity. Declining worldwide crude oil reserves and increasing energy needs has focused attention on developing existing unconventional fossil fuels like oil shale and renewable resources such as biomass. Sustainable, renewable and reliable resources of domestically produced biomass comparing to wind and solar energy is a sensible motivation to establish a small-scale power plant using biomass as feed to supply electricity demand and heat for rural development. The work in Paper I focuses on the …

Study Of Heat Transfer Phenomenon During Natural Convection, Muhammad Yousaf

Doctoral Dissertations

"The purpose of the present study was to numerically investigate the effects of the roughness elements on the heat transfer during natural convection. A computational algorithm was developed based on the Lattice Boltzmann method to conduct numerical study in two-dimensional rectangular cavities and Rayleigh-Bénard cell. A single relaxation time Bhatnagar-Gross-Krook model of Lattice Boltzmann method was used to solve the coupled momentum and energy equations in two-dimensional lattices. Computational model was validated against previous benchmark solutions, and a good agreement was found to exist. A Newtonian fluid of Prandtl (Pr) number 1.0 was considered for this numerical study. The range …

Modeling Gas Inflow For Extremely Low Permeability Shale Using Cfd, Chatetha Chumkratoke

Doctoral Dissertations

"Computational fluid dynamics (CFD) has been used to model 2-D well inflow over a range of permeabilities to study the impact of various well completion strategies (Augustine, 2011). Augustine's 2-D model was subsequently extended for 3-D flow by Thepporprapakorn (2013), for gas flow in the permeability range of tight gas (0.01 mD).

This work presents a 3-D CFD model of gas inflow valid for extremely low ranges of permeability (0.00001 mD). In extremely low permeability, gas flow is complex and includes flow from fractures, flow through porous media, and diffusive gas transport. Diffusive gas transport is important when strong density …

Modeling Explosive Lensing On A Cylindrical Body In Air: A First Step Towards Sealing An Underwater Offshore Oil Spill, Phillip R. Mulligan

Doctoral Dissertations

"In 2010, the British Petroleum (BP) Deepwater Horizon accident leaked oil into the Gulf of Mexico for 87 days. A fast response method that can seal an oil pipe and stop the release of oil is needed in order to prevent future oil leaks from turning into ecological and financial disasters. Explosives can serve this need.

This research examined how a circular implosive discontinuous explosive lens interacts with a cylindrical surface. The following research was designed to study the applicability of the Method this author developed to predict the peak pressure from multiple shockwaves converging on a centrally located cylinder. …

Development And Evaluation Of A Coaxial Cable Sensing System For Co₂ Sequestration Wellbore Integrity Monitoring, Yurong Li

Doctoral Dissertations

"Downhole monitoring plays a crucial part in geological carbon dioxide (₂) sequestration. Various downhole monitoring technologies have been explored and applied, but they are either expensive or have system longevity issues. To address this issue, a robust and cost-effective downhole sensing system based on distributed coaxial cable sensors is developed and evaluated in laboratory, and a numerical simulation with staged finite element model is conducted to study the feasibility of using the coaxial cable sensing system for monitoring and evaluation of wellbore stability during CO₂ injection.

The real-time distributed sensing system is composed of Fabry-Perot interferometer based …

Advancing Microalgae Culturing Via Bubble Dynamics, Mass Transfer, And Dynamic Growth Investigations, Aastha Ojha

Doctoral Dissertations

"The major hindrances to large scale cultivation of microalgae are the problems associated with the design, operation, and scale-up of airlift photobioreactors (PBRs), due to a lack of a comprehensive understanding of the gas-liquid interaction process in real microalgae cultures. Thus, the overall objective of this work is to advance the fundamental understanding of microalgae culturing via gas holdup, bubble dynamics, mass transfer, and dynamic growth investigations.

First, a four-point optical fiber probe technique was employed to study the local gas holdup, and bubble dynamics properties such as bubble passage frequency, chord length and bubble velocity distribution, and interfacial area …

Analysis And Mitigation Of Wellbore Breakout And Fracturing, Reza Rahimi

Doctoral Dissertations

"Mechanical wellbore integrity problems while drilling are mainly due to wellbore shear failure or tensile failure. To ensure wellbore integrity, breakout and fracture geomechanical analysis is conducted to estimate minimum and maximum drilling fluid densities. Currently, there is no agreement as to which rock failure criterion to use for estimating breakout or fracture criteria to use for analyzing drilling induced fractures. However, when wellbore integrity issues arise while drilling, mitigation strategies can be applied to rectify these problems.

This dissertation analyzes criteria for wellbore breakout and fracturing. Also, mitigation strategies for breakout and fracturing while drilling were experimentally investigated. Thirteen …

Wetting Kinetics In Forced Spreading, Amer Mohammad Al-Shareef

Doctoral Dissertations

"Under dynamic conditions, the dynamic contact angle (the angle that the liquid makes with the solid) of a liquid on a solid surface varies dramatically with substrate velocity from its equilibrium value. Experimental data of the dynamic contact angles for polydimethylsiloxane (PDMS or silicone oil) under air on a glass substrate coated with teflon, for water under PDMS, for solutions of the polymer polyethylene oxide (PEO) under air, for solutions of PEO under PDMS, were obtained to simulate and understand the systems of brine or brine containing a polymer displacing viscous crude. A variety of solid substrates were used other …

Modeling And Evaluation Of Moisture Diffusion In Polymer Composite Materials, Zhen Huo

Doctoral Dissertations

"Fiber-reinforced polymer composites have extensive applications due to their high specific strength, improved product performance, low maintenance and design flexibility. However, moisture absorbed by polymer composites during the service life plays a detrimental role in both the integrity and durability of composite structure. It is essential to understand the moisture diffusion behavior and induced damage in polymer matrix composites under varying hygrothermal conditions. In Part I, the moisture diffusion characteristics in hybrid composites using moisture concentration-dependent diffusion method have been investigated. Also, a multi-stage diffusion model was proposed to explain the deviation of moisture diffusion behavior for sandwich composites from …

Nanostructured Materials Prepared By Atomic Layer Deposition For Catalysis And Lithium-Ion Battery Applications, Rajankumar Patel

Doctoral Dissertations

"Atomic/molecular layer deposition (ALD/MLD) has emerged as an important technique for depositing thin films in both scientific research and industrial applications. In this dissertation, ALD/MLD was used to create novel nanostructures for two different applications, catalysis and lithium-ion batteries.

MLD was used to prepare ultra-thin dense hybrid organic/inorganic polymer films. Oxidizing the hybrid films removed the organic components and produced the desired nanoporous films. Both porous alumina and titania films can be prepared by such a way. A novel nanostructured catalyst (Pt/SiO₂) with an ultra-thin porous alumina shell obtained from the thermal decomposition of an aluminium alkoxide film …

Experimental Investigation Of Fracture Width Limitations Of Granular Lost Circulation Treatments, Mortadha Al-Saba, Runar Nygaard, Arild Saasen, Olav Magnar Nes

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Drilling fluid losses into fractured shales is a major challenge. Lost circulation treatments are widely applied to mitigate the losses; however, the effectiveness of these treatments is affected by different physical properties of the used lost circulation materials (LCM). This paper presents an experimental investigation to study the effect of LCM type, concentration, particle size distribution, temperature, and LCM shape on the formed seal integrity, with respect to differential pressure, at different fracture widths. The overall objective of this study is to address the effectiveness of LCM treatments in sealing fractured shales, with specific application to the over consolidated Barents …

Oxidative Dehydrogenation Of Light Alkanes With Carbon Dioxide, Marktus A. Atanga

Masters Theses

”Most experts studying the global ecosystem and climate suggest that rising anthropogenic CO₂ emissions have contributed to significant global climate change in the last half-century. The development of effective strategies that convert CO₂ into energy, fuels, and chemicals are greatly preferable to oceanic or geologic sequestration options because they offer the potential to create new commercially-viable products from renewable carbon feedstock. On the other hand, the selective oxidative dehydrogenation of light alkanes (C₂-C₄) to corresponding olefins, methane reforming, and methane coupling are the major challenges for producing valuable and versatile feedstocks. The oxidative dehydrogenation …

Numerical Analysis Of Flexural Slip During Viscoelastic Buckle Folding, Davi Rodrigues Damasceno

Masters Theses

"Flexural slip is considered to be an important folding mechanism contributing in the development of different folds such as chevron, and kink-band buckle folds. Various filed studies have provided a general conceptual and qualitative understanding of flexural slip. However, quantitative evidence of the importance of the flexural slip mechanism during fold evolution is sparse, as the actual amount of surface parallel displacement, and timing, is difficult to measure accurately, due to the lack of suitable strain markers.

In this study 2D finite element analysis is used to overcome these disadvantages and to simulate flexural slip during viscoelastic buckle folding. Variations …

Variable Stress Orientations In The Offshore Nile Delta: The Role Of Salt As A Mechanical Detachment Horizon, Weicheng Zhang

Masters Theses

"The offshore Nile Delta is characterized by variations of the maximum horizontal stress orientation in subsalt and supra-salt sequences. Margin-parallel SH, typical for tertiary deltas, is observed for regions that are below or do not contain evaporites. In sequences underlain by evaporates pre-dominantly margin-normal SH is observed. This observation yielded the first conclusive in situ evidence that salt acts as a mechanical detachment layer. In this study, 3D finite element analysis (FEA) is used to simulate the total stress distribution in the offshore Nile Delta featuring evaporate sequences. Several parameters such as different salt sequence geometries, friction coefficient on faults, …

Study On The Applicability Of Relative Permeability Modifiers For Water Shutoff Using Numerical Simulation, Dheiaa Khafief Khashan Alfarge

Masters Theses

"Water production is a challenging problem to be controlled during hydrocarbon-reservoirs production life. Disproportionate Permeability Reduction (DPR) is often used as water shutoff treatment in production wells when other conventional solutions like mechanical isolations are difficult to perform. This study applied numerical simulation methods to diagnose the factors impacting DPR treatment success on macroscopic level and to see when, where and at which conditions DPR treatment can give best results.

This work indicated that the following points should be considered before DPR treatment is executed in any reservoir to get a successful treatment. Firstly, this research explored that DPR performance …

Mixed Metal Oxide Catalysts Supported On H-Beta For Hydrogenolysis Of Glycerol Into 1,3-Propanediol, Amit Kant

Masters Theses

"Bioglycerol is the by-product which is produced largely from the microbial fermentation, hydrogenolysis of glucose in the mixture of polyols, fatty ester, soap manufacturing process and fatty acid production. Hydrogenolysis of glycerol is one of the most promising ways to convert glycerol and many work has been done towards 1,3-propanediol, 1,2-propanediol and 1-propanol using various metals and mixed-metal oxides such as W, Ru, Rh, Pt, Pd, Cu, Ni and different zeolites have been extensively used as the active components.

It has been well documented that the presence of Bronsted acid sites leads to the formation of acrolein, while Lewis acid …

Mitigation Of Wellbore Instability In Deviated Wells By Using Geomechanical Models And Mpd Technique, Husam Raad Abbood

Masters Theses

"During drilling operations for the E oilfield in the Mishrif formation in southern Iraq, stuck pipe presents a significant wellbore stability problem for deviated wells. In this study, two solutions are utilized to address this problem. The first approach is a 1-D Geomechanical model of the Mishrif formation compiled based on the state of stress and rock strength parameters. It is utilized to assess the contribution of borehole collapse leading to the stuck pipe problems. The results of this study show that wells characterized by stuck pipe are drilled along azimuths which promote wellbore collapse. Three different failure criteria, the …

Design, Scale-Up, Six Sigma In Processing Different Feedstocks In A Fixed Bed Downdraft Biomass Gasifier, Sai Chandra Teja Boravelli

Masters Theses

"This thesis mainly focuses on design and process development of a downdraft biomass gasification processes. The objective is to develop a gasifier and process of gasification for a continuous steady state process. A lab scale downdraft gasifier was designed to develop the process and obtain optimum operating procedure.

Sustainable and dependable sources such as biomass are potential sources of renewable energy and have a reasonable motivation to be used in developing a small scale energy production plant for countries such as Canada where wood stocks are more reliable sources than fossil fuels. This thesis addresses the process of thermal conversion …

An Investigation Of Plugging And Increasing Oil Recovery In Sandstone Porous Media By Micrometer-Size Particle Gel, Haifeng Ding

Masters Theses

"Micrometer-size particle gel (microgel) has been developed and successfully applied to improve conformance in mature reservoirs. However, quite few researches have been published to address on their effect on oil recovery and rock permeability modification.

This work conducted a series of core flooding experiments to investigate the injectivity, plugging efficiency and improving oil recovery potentials of a couple of microgels synthesized in our lab.

First, this work studied the impact of permeability and crosslinker concentration on PAM type microgel treatment. Results shows that microgel treatment would have a less plugging efficiency in lower permeability rocks, which could be caused by …

Sensitivity Analysis Of Geomechanical Parameters In A Two-Way Coupling Reservoir Simulation, Hector Gabriel Donoso

Masters Theses

"Currently reservoir simulators model geomechanical effects such as compaction, subsidence, fault reactivation, breach of the seal integrity, etc. using only the rock compressibility to change the pore volume. However, rock compressibility as a scalar quantity is unfit to represent the true rock mechanics in the reservoir. In order to accurately represent geomechanical effects in a reservoir simulation, a two-way coupling simulation of the stress analyzer and the reservoir simulator was done. Based on the poroelasticity theory during the production or depletion of the reservoir the porosity and permeability changed due to the stress or pore pressure changes.

A sensitivity analysis …

Single Phase Gas Flow Response Of Fractured Horizontal And Vertical Wells To Repeated Production, Divya Kandlakunta

Masters Theses

"Historically, the conventional approach to well production has been to produce continuously, minimizing interruptions to flow insofar as possible. Yet some operators have observed improved well flow rates and ultimate recovery after a significant well shut-in periods. These production increases have not been documented. This study investigates the production impact of cyclic production/shut-in on fractured vertical and horizontal gas well performance.

A numerical reservoir model in Stimplan software was used to model production in fracture stimulated vertical and horizontal gas wells. Reservoir permeability is varied over a range of 0.0001 md to 1 md, and the shut-in period was varied …

Study And Development Of Robust Preformed Particle Gels For Conformance Control, Yifu Long

Masters Theses

"To improve the oil recovery of mature reservoirs, technologies referring to conformance control have been widely developed and implemented. Among various technologies, preformed particle gel (PPG) treatment has attracted increasing attentions. PPGs, as a kind of deformable plyometric superabsorbent, could be pumped through injection wells as plugging agents to block the fracture or high-permeability zone in a reservoir.

In decade usage of PPGs, an intensively employed material is poly(acrylamide) (PAM) based hydrogel. However, conventional PAM gel did reveal deficient in formidable conditions, such as formations with high temperature and high salinity. Therefore, a novel PPG based on starch-grafting-poly(acrylamide)/nano-composite (SAC) hydrogel …