Engineering Commons^™

Nano-Channels Early Formation Investigation On Stainless Steel 316ti After Immersion In Molten Pb-Bi, Abu Khalid Rivai, Mardiyanto Mardiyanto, Annette Heinzel

Makara Journal of Technology

Development of fuel cladding and structural materials in Pb-Bi environment, especially at high temperature, is a critical issue for the deployment of LFR (Lead alloy-cooled Fast Reactor) and ADS (Accelerator Driven Transmutation System). This is because of the corrosive characteristic of Pb-Bi to metals as constituent materials of fuel cladding and structural of the reactors. Corrosion test of a high-chromium austenitic stainless steel i.e. SS316Ti in molten Pb-Bi at 550 ºC has been carried out for about 300 hours continuously. The characterization using SEM-EDS (Scanning Electron Microscopy - Energy Dispersive X-ray Spectroscopy) showed that an iron oxide as the outer …

Synthesis Of Libob Fine Powder To Increase Solubility, Etty Marti Wigayati, Titik Lestariningsih, Christin Rina Ratri, Ibrahim Purawiardi, Bambang Prihandoko

Makara Journal of Technology

Lithium bis (oxalate) borate or LiBOB compound has captured interest of researchers, because it is potentially viable to be used as electrolyte salt in lithium-ion battery system. This compound is easy to synthesize and considered to be more environmentally friendly compared to conventional electrolyte salt because LiBOB does not contain halogen element. This research focused on the synthesis of LiBOB fine powder, which main purpose is improving LiBOB salt solubility in liquid electrolyte solution. This will aid the ion transfer between electrodes which in turn will increase the electrolyte performance. Solid state reaction was employed in this experiment. Synthesis of …

The Effects Of Light Intensity On The Growth Kinetics Of The Cyanobacteria Synechococcus Elongatus And Synechocystis Sp., Aleshia Lexus Hector

Honors Capstones

No abstract provided.

Quantitative Analysis Of High Pressure Hazards In Oil And Gas Field Operations, Giuseppe Feo

Honors Capstones

No abstract provided.

The Chiral Coefficient: Rapid Optimization Of Plasmonic Circular Dichroism, Jon Wilson

Honors Capstones

No abstract provided.

Corrosion Behaviour Of Selective Laser Melted Ti-Tib Biocomposite In Simulated Body Fluid, Yang Chen, Junxi Zhang, Nianwei Dai, Peng Qin, Hooyar Attar, Laichang Zhang

Research outputs 2014 to 2021

The corrosion behaviour of CP-Ti and Ti-TiB composite produced by selective laser melting (SLM) in the artificial simulated body fluid (Hank's solution) at body temperature was investigated systematically by using electrochemical measurements (potentiodynamic polarisation curves and electrochemical impedance spectroscopy), together with some detailed structural characterisations. The results demonstrate that SLM-produced Ti-TiB composite samples possess better corrosion resistance than SLM-produced CP-Ti samples in Hank's solution. Due to these tiny TiB and TiB₂ particles acting as the micro-cathode uniformly distributing in titanium matrix, anodic dissolution of titanium matrix in the corrosion process is prominently facilitated in early stages, followed by rapid …

Evaluating The Bond Behavior Between Frp And Grooved Concrete Specimens Using Single Shear Pull Out Test, John Omboko

Master's Theses (2009 -)

Surface preparation affects the bond behavior between Fiber Reinforcing Polymer (FRP) composite material and concrete. In this research, a special type of surface preparation known as grooving, which involves cutting transverse grooves, is conducted on concrete blocks (specimens) that are categorized as either Unfilled (U) or Filled (F). This idea is to ascertain how the grooves affect the strength of FRP-bonded-concrete specimen. These two categories are then benchmarked to control (C) specimens which do not have grooves on them. Category U specimens only have the epoxy applied on the concrete surface while category F specimens have epoxy applied on both …

Quantifying Cyanide Inhibition Of Nitrification And Developing Cost-Effective Treatment Processes, Germano M. Salazar-Benites

Civil & Environmental Engineering Theses & Dissertations

All wastewater treatment plants that operate multiple hearth furnaces (MHF) and are required to nitrify must manage the inhibitory effects of free cyanide (HCN, CN-) in the scrubber return flows due to inhibitory impacts on nitrifying bacteria.

HRSD Boat Harbor Treatment Plant (BHTP) a 25 MGD facility consisting of primary and secondary treatment, employs an anoxic selector process for nitrification and partial denitrification and operates a MHF. There is a desire to improve TN removal performance at BHTP due to an annual mass-based bubble permit limit on a combined discharge from seven HRSD plants, and there are no discharge limitations …

Purification Simulation With Vapor Permeation And Distillation-Adsorption In Bioethanol Plant, Misri Gozan, Mia Sari Setiawan, Kenny Lischer

Makara Journal of Technology

High purity of Bioethanol is required in biofuel mixing with gasoline (EXX). In bioethanol production line, the azeotropic property of ethanol-water becomes the barrier for purification process. This study examined two bioethanol separation processes by support of simulation tools, Superpro Designer 9.0 software. Ethanol purity and a low costeconomical process were the major considerations. Purification method of vapor permeation membrane technology was compared with distillation-adsorption method. Data from previous lab experiments and some literatures were used. The results showed that distillation-adsorption method is more economical compared to vapor permeation technology. Payback period of the simulation is 3.9 years and 4.3 …

Influence Of Polyethylene Glycol (Peg) In Cmc-Nh4br Based Polymer Electrolytes: Conductivity And Electrical Study, Nur Khalidah Zainuddin, Ahmad Salihin Samsudin

Makara Journal of Technology

The present work was carried with new type and promising polymer electrolytes system by development of carboxyl methylcellulose (CMC) doped NH4Br and plasticized with polyethylene glycol (PEG). The sample was successfully prepared via solution casting with no separation phase and good mechanical properties. The electrical conductivity and thermal conductivity of CMC-NH4Br-PEG based PEs system have been measured by the electrical impedance spectroscopy method in the temperature range of 303–373 K. The highest ionic conductivity gained is 2.48 x 10-3 Scm-1 at ambient temperature for sample contain with 8 wt. % PEG. It can be concluded that the plasticized is accountable …

Sorption And Ion Exchange Behaviour Of Natural Zeolite Packing, Chandra Wahyu Purnomo, Bernice Lenora, Wiratni Budhijanto, Hirofumi Hinode

Makara Journal of Technology

It is well known that zeolite is an efficient metal ions adsorbent. The excess charge of the zeolite building blocks i.e. (AlO4)-5 and (SiO4)-4 creating a negative surface charge that attract metal cations. Beside the surface charge, zeolite also has three dimensional pore structure and reasonably large surface area which also can be used as adsorption sites. Ease of cation uptake make it suitable for many process with adsorption and desorption application. This study was conducted to observe the sorption and ion exchange behaviour of zeolite-betonite rings toward iron and cobalt cations. The results shows that the adsorption patterns follow …

Chemically Stable Artificial Sei For Li-Ion Battery Electrodes, Qinglin Zhang, Lei Han, Jie Pan, Zhi Chen, Yang-Tse Cheng

Chemical and Materials Engineering Faculty Publications

The importance of coating's chemical stability in lithium-ion batteries has been demonstrated by this study. It is well known that the mechanical properties determine the cycle life, and chemical stability or chemical degradation rate determines the calendar life. In this study, we used HfO₂ coatings prepared by atomic layer deposition as an example to show the chemical stability of the coatings for lithium ion battery electrodes.

Catalytic Gasification Of A Powder River Basin Coal With Co2 And H2o Mixtures, Zhang Fan, Fan Maohong, Huang Xin, Morris D. Argyle, Zhang Bo, Brian Towler, Zhang Yulong

Faculty Publications

CO₂ capture and utilization caused more and more public attention because of its environmental impact. The objective of this work was to study the catalytic gasification of a sub-bituminous coal from the Powder River Basin (PRB) using a CO₂ and H₂ O mixture as the gasifying agent. Sodium and iron, in the form of inexpensive compounds, were chosen to catalyze the coal gasification. The experiments were conducted between 700 and 900 °C in a fixed-bed laboratory gasifier under the atmospheric pressure. Results show that the added catalysts had an effect on the composition of gas …

Sorption Of Benzene, Dichloroethane, Chloroform And Dichloromethane By Polyethylene Glycol, Polycaprolactone And Their Copolymers At 298.15 K Using A Quartz Crystal Microbalance, Abhijeet Radhakrishna Iyer

USF Tampa Graduate Theses and Dissertations

Quartz crystal microbalances (QCM) are acoustic wave sensor systems which are used majorly for vapor and liquid sensing. QCM come under the category of thickness shear mode (TSM) sensors. There are several methods to study organic vapor sensing; the QCM method is the one that offers the highest sensitivity and generates the most data. Solubilities of benzene, dichloroethane, chloroform and dichloromethane in polyethylene glycol (PEG), polycaprolactone (PCL), and several di-block PEG/PCL copolymers at 298.15 K are reported. There are literature data available for most of the solvents in the homopolymers PEG and PCL but no literature data is available for …

A Study Of Iron-Nitrogen-Carbon Fuel Cell Catalysts: Chemistry – Nanostructure – Performance, Michael J. Workman

Nanoscience and Microsystems ETDs

Fuel cells have the potential to be a pollution-free, low-cost, and energy efficient alternative to the internal combustion engine for transportation and small-scale stationary power applications. The current state of fuel cell technology has already achieved two of these three lofty goals. The remaining barrier to wide-scale deployment is the high cost, which is primarily caused by dependence on large amounts of platinum to catalyze the energy conversion reactions. To overcome this barrier and facilitate the integration of fuel cells into mainstream applications, research into a new class of catalyst materials that do not require platinum is needed.

There has …

A Multi-Fluid Model For Microstructure Formation In Polymer Membranes, Douglas R. Tree, Kris T. Delaney, Hector D. Ceniceros, Tatsuhiro Iwama, Glenn H. Fredrickson

Faculty Publications

We develop a multi-fluid model for a ternary polymer solution using the Rayleighian formalism of Doi and Onuki, and give an efficient pseudo-spectral method for solving both the diffusion and momentum equations that result. Subsequently, we find that the numerical simulation is capable of describing systems at the micron length-scale and easily reaches millisecond time-scales. In addition, we characterize the model thermodynamics and kinetics including the (i) phase behavior, (ii) structure of the interfaces, (iii) mutual diffusion coefficients, (iv) bulk spinodal decomposition kinetics with and without hydrodynamics and (v) spinodal decomposition in the presence of an interface with a non-solvent …

Toxicological Differences Between Perfluoroalkyl Substances (Pfas) Isomers Using Developmental Biomarkers, Gabriel A. Cantu

Theses and Dissertations

Perfluoroalkyl substances (PFAS) are metabolically stable synthetic chemicals that have been manufactured for commercial and industrial purposes since the 1950s. PFAS possess surfactant properties that make them ideal to fight hydrocarbon fires and are therefore present in aqueous film forming foams (AFFF). Furthermore, AFFF may contain blends of both linear and branched PFAS isomers. Research suggests that branched PFAS isomers have greater relative placental transfer efficiencies than their linear counterpart, but few studies have evaluated their toxicity. Therefore, the sustained use of AFFF in the U.S. Air Force presents a risk of branched PFAS exposures in pregnant females. This study …

Light Olefin Production By Cracking Nannochloris Oculata Microalgae Using Aluminosilicate Catalysts, Gaurav Goyal

USF Tampa Graduate Theses and Dissertations

The global demand and sustainability concerns for producing light olefins encouraged researchers to look for an alternative and sustainable feedstock. Alkenes, such as ethene, propene and butene, are known as light olefins. Olefins are the backbone of the chemical industry because they serve as the chemical building blocks for the manufacture of polymers, fibers, and numerous organic chemicals. Feedstocks such as naphtha, natural gas and liquefied petroleum gas (LPG) are currently used for producing light olefins, but they are non-renewable and hence unsustainable. In contrast, biomass as a potential feedstock for the production of fuels and chemicals is renewable. Microalgae, …

Polysaccharide Fabrication Platforms And Biocompatibility Assessment As Candidate Wound Dressing Materials, Donald C. Aduba Jr., Hu Yang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Wound dressings are critical for wound care because they provide a physical barrier between the injury site and outside environment, preventing further damage or infection. Wound dressings also manage and even encourage the wound healing process for proper recovery. Polysaccharide biopolymers are slowly becoming popular as modern wound dressings materials because they are naturally derived, highly abundant, inexpensive, absorbent, non-toxic and non-immunogenic. Polysaccharide biopolymers have also been processed into biomimetic platforms that offer a bioactive component in wound dressings that aid the healing process. This review primarily focuses on the fabrication and biocompatibility assessment of polysaccharide materials. Specifically, fabrication platforms …

Synthesis And Catalytic Applications Of Non-Metal Doped Mesoporous Titania, Syed Z. Islam, Suraj R. Nagpure, Doo Young Kim, Stephen E. Rankin

Chemical and Materials Engineering Faculty Publications

Mesoporous titania (mp-TiO₂) has drawn tremendous attention for a diverse set of applications due to its high surface area, interfacial structure, and tunable combination of pore size, pore orientation, wall thickness, and pore connectivity. Its pore structure facilitates rapid diffusion of reactants and charge carriers to the photocatalytically active interface of TiO₂. However, because the large band gap of TiO₂ limits its ability to utilize visible light, non-metal doping has been extensively studied to tune the energy levels of TiO₂. While first-principles calculations support the efficacy of this approach, it is challenging to …

The Continuous Synthesis Of Pd Supported On Fe3o4 Nanoparticles: A Highly Effective And Magnetic Catalyst For Co Oxidation, Hany A. Elazab

Chemical Engineering

We report a facile approach used for the simultaneous reduction and synthesis of a well dispersed magnetically separable palladium nanoparticle supported on magnetite (Pd/Fe3O4 nanoparticles) via continuous flow synthesis under microwave irradiation conditions, using a Wave Craft’s microwave flow reactor commercially known as ArrheniusOne, which can act as a unique process for the synthesis of highly active catalysts for carbon monoxide (CO) oxidation catalysis. The prepared catalysts are magnetic, which is an advantage in the separation process of the catalyst from the reaction medium. The separation process is achieved by applying a strong external magnetic field which makes the separation …

Efficacy Of Natural Plant Extracts In Antimicrobial Packaging Systems, Kofi Jocelyn Brobbey, Jarkko J. Saarinen Adj. Prof., Hanna-Leena Alakomi Dr., Baoru Yang Prof., Martti Toivakka Prof.

Journal of Applied Packaging Research

Antimicrobial plant extracts used in food packaging provide a healthy packaging alternatives. They contain aromatic and phenolic compounds that are responsible for their antibacterial properties. In this study, we report the antibacterial effects of extracts obtained from sea buckthorn (Hippophaë rhamnoides L.) leaves, and inner bark of pine trees (Pinus silvestris) that were applied as coatings on paper suitable for packaging application. Extracts from sea buckthorn leaves exhibited antibacterial effect both as a solvent extract and as a coating on paper against Pseudomonas aeruginosa as test bacteria. However, coatings of pine bark extract did not exhibit …

Toxicity Evaluation Of Magnetic Hyperthermia Induced By Remote Actuation Of Magnetic Nanoparticles In 3d Micrometastasic Tumor Tissue Analogs For Triple Negative Breast Cancer, Nathanael A. Stocke, Pallavi Sethi, Amar Jyoti, Ryan Chan, Susanne M. Arnold, J. Zach Hilt, Meenakshi Upreti

Chemical and Materials Engineering Faculty Publications

Magnetic hyperthermia as a treatment modality is acquiring increased recognition for loco-regional therapy of primary and metastatic lung malignancies by pulmonary delivery of magnetic nanoparticles (MNP). The unique characteristic of magnetic nanoparticles to induce localized hyperthermia in the presence of an alternating magnetic field (AMF) allows for preferential killing of cells at the tumor site. In this study we demonstrate the effect of hyperthermia induced by low and high dose of MNP under the influence of an AMF using 3D tumor tissue analogs (TTA) representing the micrometastatic, perfusion independent stage of triple negative breast cancer (TNBC) that infiltrates the lungs. …

Evaluation Of Procedures To Quantify Solvent Retention In Electrospun Fibers And Facilitate Solvent Removal, Anthony R. D'Amato, Nicholas J. Schaub, Jesus M. Cardenas, Erich Franz, Deniz Rende, Alexis M. Ziemba, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

Electro spun fiber scaffolds crafted from polyesters are studied extensively for potential tissue engineering applications. For translation of electro spun fibers into the clinic, the FDA requires analysis and quantification of any organic solvent that may be retained in the fibers since many organic solvents can negatively affect cells and tissues. If a significant amount of solvent is retained, then developing procedures for efficient solvent removal may enhance the clinical potential of these materials. In this study we use fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and nuclear magnetic resonance spectroscopy (NMR) to analyze solvent retention. A correlative analysis …

Incorporating Poly(3-Hexyl Thiophene) Into Orthogonally Aligned Cylindrical Nanopores Of Titania For Optoelectronics, Suraj R. Nagpure, James F. Browning, Stephen E. Rankin

Chemical and Materials Engineering Faculty Publications

The incorporation of hole conducting polymer poly(3-hexyl thiophene) (P3HT) into the 8-9 nm cylindrical nanopores of titania is investigated using films with a unique orthogonally oriented hexagonal close packed mesostructure. The films are synthesized using evaporation induced self-assembly (EISA) with Pluronic triblock copolymer F127 as the structure directing agent. The orthogonally oriented cylindrical nanopore structure was chosen over a cubic structure because confinement in uniform cylindrical channels is hypothesized to enhance hole conductivity of P3HT by inducing local polymer chain ordering. Orthogonal orientation of the cylindrical nanopores is achieved by modifying the substrate (FTO-coated glass slides) with crosslinked F127. After …

Engineering Cell-Free Protein Synthesis Technology For Codon Reassignment, Biotherapeutics Production Using Just-Add-Water System, And Biosensing Endocrine Disrupting Compounds, Sayed Mohammad Salehi

Theses and Dissertations

Cell-free protein synthesis is an emerging technology that has many applications. The open nature of this system makes it a compelling technology that can be manipulated to answer many needs that are unavailable in other systems. This dissertation reports on engineering this technology for: 1) sense codon emancipation for incorporation of multiple unnatural amino acids; 2) expressing a hard-to-express anticancer biotherapeutic and introducing a just-add-water system; 3) a biosensing ligand that interacts with nuclear hormone receptors. Emancipating sense codons toward a minimized genetic code is of significant interest to science and engineering. A promising approach to sense codon emancipation is …

A Novel Tantalum-Containing Bioglass. Part I. Structure And Solubility, Adel Mf Alhalawani, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bio glasses are employed for surgical augmentation in a range of hard tissue applications. Tantalum is a bioactive and biocompatible transition metal that has been used as an orthopedic medical device. It has a range of biological and physical properties that make its incorporation into ionic form into bioactive glass systems promising for various clinical applications. The work herein reports the characterization and properties of novel tantalum-containing glasses. A series of glasses based on the system 48SiO₂-(36-X)ZnO-6CaO-8SrO-2P₂O₅-XTa₂O₅ with X varying from 0 mol% (TA0) to 0.5 mol% (TA2) were synthesized. The …

The Problem Of The Anode Electrolyte In H-Type Electrolytic Cell For Electrochemical Reduction Of Carbon Dioxide, Rui Zhang, Wei-Xin Lv, Li-Xu Lei

Journal of Electrochemistry

Electrochemical reduction of carbon dioxide (CO₂) was studied in the H-type electrolytic cell. It was found that the voltage between the cathode and the anode would increase during the long time electrolysis process, for this reason the electrolytic process would be unsustainable. After the experimental investigations carried out by constant potential electrolysis, constant current electrolysis, pH test and KHCO₃ concentration analysis of anode electrolyte before and after the electrolysis, the increase in cell voltage might be caused by the following process: H⁺, that was generated from the anodic oxygen evolution reaction, reacted with HCO_{3 …}

Application Of Composite Ionic Liquid In Electro-Oxidation Activation Of A C-H Bond, Zi-Ying Chen, Qian-Qian Wu, Jian-Qing Zhang, Ying-Hong Zhu, Chun-An Ma

Journal of Electrochemistry

In this paper, the ionic liquid/carbon nanotube composite material was prepared through modifying the ionic liquid 1-ethyl-3-methylimidazolium acetate to multi-walled carbon nanotubes. The electro-oxidation properties of p-methoxy toluene (p-MT) were studied using the composite as an electrolyte. The effects of scanning speed, temperature and substrate concentration were studied by cyclic voltammetry and chronoamperometry. The electrochemical kinetics of p-MT in this system was also studied. The results showed that the electrochemical oxidation of p-MT in the composite electrolyte solution was irreversible. The process was mainly controlled by diffusion, and the diffusion coefficient (D) was 7.69×10-10 cm²·s^-1. Increasing …

Electrochemical Synthesis Of Porous Polyaniline Electrodes Using Hkust-1 As A Template And Their Electrochemical Supercapacitor Property, Qiong Luan, Chun-Feng Xue, Hong-Ye Zhu, Fu-Juan Yang, Xu-Li Ma, Xiao-Gang Hao

Journal of Electrochemistry

Excellent electrode plays vital important role in the performance of supercapacitors. Polyaniline (PANI) with good conductivity is often used to prepare electrode. However, its available surface is limited and results in a poor supercapacitance in many cases. It is desirable to fabricate an electrode containing electroactive PANI with high surface area deriving from its porous structure. Here, the metal-organic framework (MOF) material with high surface area was selected as a hard template for synthesizing porous PANI. Microporous PANI composite electrodes (Micro-PANI/CC) were fabricated by depositing aniline on to carbon cloth (CC) pre-coated with MOF material of HKUST-1 using a unipolar …